I'm on windows 7 64 bit, and when I try to save a site by double clicking on the icon star on the address bar, bookmark box flickers power on and off and disappears later

I'm on windows 7 64 bit and when I try to save a site by double clicking on the icon star on the address bar, bookmark box flickers power on and off and then disappears. I did some research and found that the default theme is the cause. I installed a different theme and the problem goes away and that's why I don't know the root cause. Anyone with ideas on how to solve this problem? I like the default theme!

Try to uncheck the box next to 'use acceleration hardware when available' in the Options. Worked for me!

Tags: Firefox

Similar Questions

  • When I click on the address bar or any key on the keyboard, I have more strong click and can print only at the rate of oneletter every three seconds. Any help, please?

    When I click on the address bar I get loud click and cannot enter a letter by pressing the button for 3 or 4 seconds. Any help, please?

    It seems that if you have enabled accessibility or ease of Access Options in Windows (perhaps keys filters). Without knowing which version of Windows you have, I can't point you to specific instructions, but here are some useful pages:

    Windows 7: http://www.microsoft.com/enable/products/windows7/
    http://Windows.Microsoft.com/en-us/Windows7/make-the-keyboard-easier-to-use

    Windows Vista: http://www.microsoft.com/enable/products/windowsvista/

    Windows XP: http://www.microsoft.com/enable/products/windowsxp/

  • When I try to "save under" I get a message "Initalising the root folders to display" and then the screen freezes

    When I try to "save under" I get a message "Initalising the root folders to display" and then the screen freezes. Sometimes when I click several times on the target folder it opens other times it does not. Any thoughts?

    Hello

    You try to save files using Microsoft office?

    If so, this article should help you

    The program stops responding when you try to open or to save a file in an Office 2002 program, in an Office 2003 program, in a 2007 Office program or in a program Office 2010

    http://support.Microsoft.com/kb/313937

    If its with a different program and then check if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.

    Step a. refer to the article below for the procedure safe mode in Windows XP

    A description of the options to start in Windows XP Mode

    http://support.Microsoft.com/kb/315222

    Step b. You need to perform a clean boot to find the program that is causing and then disable or remove.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353/en-us

    Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • By clicking on the address bar or search bar and typing does not erase the previous text inside

    When I click on the address bar or search bar and start typing a new entry, it does not erase the previous text. I always have to remove it first to clear the field and then I can type in the new URL or keyword...

    OK, I found the search the on: configuration database. The problem is that browser.urlbar.clickSelects.All is set to "false". I changed it to "true" and now everything is perfect...

    Also to solve the same problem with the search bar, I changed browser.search.context.loadInBackground from false to true.

  • Installed PSE12 of disk on Windows 7 (64 bit) but when I try to enter it asks me to sign the Publisher. Stuck in a loop!

    Installed PSE12 of disk on Windows 7 (64 bit) but when I try to enter in the editor it asks me to connect for the first time, I do it, so I need to go back where I came from just. Stuck in a loop!  Connection is correct.  If I click on Organizer it seems to work properly but I can't in the editor.

    12. does not elements

  • When I start a new page in FF4 is always on the right side of the screen and the menu bar also goes by the window. If I click on the address bar is displayed correctly

    It is a problem I've had since the first race of FF4 beta. All sites are on the right side of the window to start a new page, then it works very well after the first.

    Create a new profile exclusively for version 4.0 beta and create a shortcut on the desktop with Pei 'profile' attached to the target to launch this profile.

  • Gray lines in the address bar, bookmarks and tabs bar. Disabling hardware acceleration solve but then vertical sync does not work in the browser. Solution?

    The drivers are up to date! ATI Radeon HD 5850.

    If there are problems with hardware acceleration off then try disabling OMTC and set this pref to false on the topic: config page.

    • topic: config page: layers.offmainthreadcomposition.enabled = false
  • I have a compac using XP. I get "your windows installer is installed correctly" when I try to unimstall a program. That's happened? How can I get the installer working properly?

    I can't get the uninstall program to work properly in 'install/remove '.  I am told "windows install is installed incorrectly or it is in safe mode.  Another problem is that I can not transfer files on a CD.  I don't know if these issues are related.  I don't know enough to find the offending element.  Someone at - it response - I can fix it myself, or something I can download from Microsoft?
    Thank you.

    That is what the message really says or does mean something like these examples:

    When you try to install a program or by clicking on the button 'Edit' or 'Delete' in Add / Remove programs on an application already installed, you see a message like this:

    Windows Installer may be damaged or your computer is in safe mode

    or maybe this message:

    The Windows Installer Service could not be accessed.
    This can occur if you are running Windows in safe mode or if Windows Installer is not installed properly. Contact your support team.

    Click Start, run and enter in the box:

    services.msc

    Click OK to open the Services applet.

    Look in the Services applet to see if the Windows Installer Service is still listed and you will find that it is probably not listed (but it should be).

    If the Windows Installer Service is listed, make sure it is not disabled and if it is disabled, change the startup type to manual.  You can't set it to automatic as it will start on its own when he needs start and you don't need it starts every time that you restart your system and execution of all the day when there is nothing to do.  The Service will start when they need start if she is able to start.  Enough-click OK to save your changes and close the Services applet, reboot your system to make sure the changes 'stick' and see how things look now.

    If the Windows Installer Service is lack of Services, you must add it as follows:

    Click Start, run, and in the box enter these commands one at a time by clicking on the OK button for each:

    msiexec /Unregister (or you can type: msiexec /unreg)
    msiexec/regserver

    Click OK after each command (there is no message about what happened)

    Check in the Services applet again to see if the Windows Installer Service is now listed, and the startup type is set to manual, reboot your system to make sure the changes 'stick' and see how things look now.

  • desertdave760 why doesn't the URL frequently disappears from the address bar?

    Thus, for example, here, this page is not the address in the address bar. If I wanted to send the site to someone, I have to go to IE (God forbid) and retype the url there.

    This happens for many but not all sites, I'm sure. He says now, search or enter the address

    It's strange. "Search or enter the address" appears if you delete the current address, but if you click in the address bar and press the ESC key it should display immediately again (Esc cancels the change).

    This text appears also with a few built-in Firefox pages, like the homepage and the new tab page. But for the 'real' web pages, you should see the address.

    In the case where one of your extensions is concerned, could test the page Firefox Safe Mode? It is a standard diagnostic tool to disable some advanced features of Firefox and extensions. More info: questions to troubleshoot Firefox in Safe Mode.

    You can restart Firefox in Mode safe mode using either:

    • button "3-bar" menu > "?" button > restart with disabled modules
    • Help menu > restart with disabled modules

    Not all add-ons are disabled: Flash and other plugins still works

    After stops in Firefox, a small dialog box should appear. Click on 'Start mode safe' (not reset).

    Any difference?

    Also, maybe it's not relevant to you, but sometimes users have a bookmark that opens a page in the sidebar to the left in the main part of the tab instead of. The address bar displays only the address of the main part of the tab. If your Firefox seems to have a split screen (left-right), that might be the problem.

  • Drag the address bar in Windows 7

    cannot, right-click & hierarchy drag on the address bar. the mouse pointer changes as if it is allowed however still, the operation takes place in the current folder.

    It is deplorable that ctrl + click on the address bar no longer works, but this means that we have no alternative.

    Freqy Hey,.

    I tried this and it seems to work for me.  I used the right mouse button to drag a file to the Documents "link in the chain" of the address bar, and the ToolTip showed "move to the Documents.  When I published, he went as expected.  The address at the time bar looked like this:
    Libraries > Documents > project files > projects Web > Skeene.net
    The file that I hung out was just a normal jpg file.
    So I guess that one thing I could ask, is has it worked for you before?  Maybe try a new user account and see if it persists.
  • I am currently using Windows Vista 64-bit and every so often Vista shows that this network adapter is spent in local mode.

    I am currently using windows vista 64-bit and every so often vista shows that this network adapter is spent in local mode

    I did several tests, including
    ping google.com
    to test if it is online and this proves that when its premises in sound mode now online
    I also entered the adpaper of netowrking and disabled so that nothing can turn it off energy saving
    my antivirus is AVG
    AND use zonealarm as my firewall program Please note even with disabled zonelarm it still happens
    can anyone help
    ?
    original title: network adapter shows onffline but it is online

    Hello

    You can try to uninstall and reinstall the network adapter.

    To do this follow these steps:

    1. click on Start, in the Start Search bar type device manager and press enter.

    2. in the list of devices, right-click of the network adapter, and then click on uninstall, if she invites you to completely remove the driver files, click ok to delete.

    3 restart the computer once the uninstall is complete.

    4. after the computer restarts, it will automatically detect and install the drivers.

    5. check if the problem is resolved.

  • Windows Media Center has stopped to display images. I am running windows 7 64 bit and the photo folders are visible but empty.

    I am running windows 7 64 bit and just recently I cannot see my photos in media center. Show folders that contain pictures, but they are empty. Also, I went to the folders in my computer and tried to open some of my pictures with media center, and they will not open. This is something new because I've always been able to see my photos in Media center. Everything in Media center works great.  Help

    Hello

    1 have you ever done any recent hardware or change the software on the computer before this problem?

    2. the functions of Windows Media Center are intact?

     

    Method 1:

    First upward, to try and perform a System Restore to a State previous when the Windows Media Center worked very well.

    What is system restore?

    http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

    Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed. System Restore helps you restore system files from your computer to an earlier point in time.

    Method 2:

    Turn off the feature and reactivate it:

    a. click Start, type appwiz.cpl and press ENTER.

    b. in the programs and features window, click enable or disable the functionality of Windows in the left navigation pane.

    c. find the Windows Media Center and uncheck the option.

    d. restart the computer.

    e. navigate back to the same location and activate the option back.

    Method 3:

    Refer to this link to learn more about,

    See the photos and videos in Windows Media Center:

    http://Windows.Microsoft.com/en-us/Windows7/view-pictures-and-videos-in-Windows-Media-Center

    To troubleshoot issues with images and videos in Media Center show,

    Working with pictures in Windows Media Center: frequently asked questions:

    http://Windows.Microsoft.com/en-us/Windows7/working-with-pictures-in-Windows-Media-Center-frequently-asked-questions

    Method 4:

    Reregister the following files.

    a. close Windows Media Center.

    b. click the Start menu, type cmd.

    c. right-click on the cmd option in the start menu and select run as administrator.

    d. type in the commands one by one by and press ENTER after each one.

    Regsvr32.exe atl.dll

    C:\WINDOWS\eHome\ehSched /unregServer

    C:\WINDOWS\eHome\ehSched/service

    C:\WINDOWS\eHome\ehRecvr /unregServer

    C:\WINDOWS\eHome\ehRecvr/service

    C:\WINDOWS\eHome\ehRec.exe /unregServer

    C:\WINDOWS\eHome\ehRec.exe/regserver

    C:\WINDOWS\eHome\ehmsas.exe /unregServer

    C:\WINDOWS\eHome\ehmsas.exe/regserver

    e. restart the computer.

    f. restart Windows Media Player and see if the problem persists.

    I hope this helps!

  • Windows Vista 64-bit and button Support - Qosmio G30?

    Windows Vista 64-bit and Support Button?

    Hello buddy

    What do you expect now after writing this fabulous issue?
    Don't you think that someone will take you seriously?

    Just a tip: If you want to ask something to let people know what model of laptop you have exactly. All laptops are not supported for 64 bit Vista operating system.

  • Windows 7 (64-bit) and 5.2 of NI-Visa

    Hello

    I use Windows 7 64-bit and has just installed TS/LV2012 and NI-Visa 5.2

    Then I started MAX and that you want to add a new instrument of TCPIP, but it says: "NI-VISA is not installed on this system or NI-VISA does not support the creation of new resources on this type of system.

    So I wonder: neither Visa 5.2 is not compatible with Windows 7 64 bit? Because on the site, it is only "WIndows Vista" in the product description.

    Thx for the help

    Additional information: TS/LV is installed on a WIndow7 that runs in a VirtualBox Image. This can be also a problem?

    His works now.

    After I've run all Windows updates in the VirtualBox the VISA was also Max.

  • Running Windows 7 64 bit and trying to install a software - error 80073712

    Running Windows 7 64 bit and trying to install C++ 2005 redistribution (x 64).  It is required by another application.

    Produces the following error:
    Product: Microsoft Visual C++ 2005 Redistributable (x 64) - Error 1935.An error is generated during the installation of assembly ' Microsoft.VC80.ATL, type = "win32", version = "8.0.50727.762", processorArchitecture, publicKeyToken = "1fc8b3b9a1e18e3b" is "amd64" '. "
    See Help and Support for more information. HRESULT: 0 X 80073712. assembly interface: returned IAssemblyCacheItem, function: commit, component: {837BF1EB-D770-94EB-A01F-C8B3B9A1E18E} (NULL)

    80073712 is that the message above suggests by http://support.microsoft.com/?kbid=947821 that "the component store is in an inconsistent state."  And if I look at the CBS.log newspaper as suggested, I see many messages that
    "2010-01-03 06:28:38, CBS News could not get the CSI store. [HRESULT = 0 X 80073712 - ERROR_SXS_COMPONENT_STORE_CORRUPT]
    2010-01-03 06:28:38, error CBS was unable to initialize the store with the boot drive settings: directory and windows: [HRESULT = 0 x 80073712 - ERROR_SXS_COMPONENT_STORE_CORRUPT]
    2010-01-03 06:28:38, d:\w7rtm\base\wcp\componentstore\storelayout.cpp(6636) 00000087@2010/1/3:13:28:38.200 (F) CSI of the error: error STATUS_SXS_COMPONENT_STORE_CORRUPT from the ComponentStore::CRawStoreLayout:OpenCanonicalDataKey expression function: (null)
    [gle = 0 x 80004005] »

    At this point, most of the patches for this is made related to Vista and I tried to use or adapt without success.  Suggestions?

    Windows Update is not your problem, even if you've upgraded to Win7 64-bit. Please repost your question in the support forum: http://social.answers.microsoft.com/Forums/en-US/w7programs/threads

    Good luck!

Maybe you are looking for

  • Satellite A500 - fans never stops

    Hello I did some experiments with methods of cooling of vista... First of all, when I start my satellite A500, something like three minutes before the fan to start very quickly.When I opened the Toshiba PC Health monitor, temperatures never exceed 40

  • HBO and Showtime part family

    Hello I currently subscribe to HBO & Showtime via iTunes. My family also wishes to watch HBO & Showtime on their iOS devices. How can I achieve this without giving them access to my iTunes account? I thought this was what family sharing? Thank you Co

  • HP officjet 7500 has mac osx mountain lion

    Three weeks ago, I bought a HP OfficeJet 7500 a AIO printer. I have an iMac and MacBook Pro computer both running Mac OSX Mountain Lion 10.8.4. I tried to install the printer, connect to my router by Ethernet cable and iMac after a lot of frustration

  • Why silverlight plug in accident each time trying to watch a movie on Xfinity online

    I uninstalled and reinstalled 1000 times. I erased the cach. I deleted firfox completely. I've upgraded to IE9 and remove all other browsers. I deleted all the history. However, the Silverlight plug simply refuses to work. Period. What can possibly b

  • How do you define more time on the Billboard for the hp 8600 printer?

    How do you set the time / date on the notice board of the printer plus hp8600?