I'm trying to interconnect a XP home and a XP Pro with a Firewire 1394 through a Maxtor One Touch 4 Plus HARD drive cable to share the HARD drive and also run a home network.
Is it possible for me to take the files of XP Home that has installed 1394 controller and use the 4 files that I found marked 1394 in I386 to form the controller on my XP Pro, more driver 1394 in \WINDOWS\System32\DRIVERS to close the loop and enable the ethernet connection both 1394 on both computers to have two computers connected to the Maxtor One Touch 4 Plus as well as HARD drive the network. I was hoping maybe even replace the ethernet cable and use the connection 1394 through the Maxtor which has several types of connectors on it. Again, I am trying to install a controller 1394 on a computer that has no 1394, than USB 2.0. so that the XP Pro machine will recognize the 1394 card with my home XP firewire cable to the Maxtor HDD which it is already connected to the XP Pro via USB 2.0? I have you confused yet?
I found a post of S.W. video dated the 05/01/11, which has been handled by Gokul T and treated with the Firewire cable and video on a newer operating system, so I thought I would test Gokul T or someone else to resolve this situation. I couldn't find a controller IEEE 1394 I could just download and install on my XP Pro machine. These are the two Dell, is an inspiron 5100 with installed 1394 with taking and the GX280 is one without the 1394 controller installed, or the socket.
You will need a firewire to XP Pro card. The drivers are already on the hard drive. Once the card is installed, you will see the icon of the network for this adapter. So you can use it.
The reason why there is no 1394 net adapter on XP Pro is now, because there is no firewire card
Tags: Windows
Similar Questions
-
Once again; same problem, others have encountered but nothing seems to work.
An error occurred when opening a virtual disk. Make sure that the converter server and source running machines have network access to the ESX/ESXi hosts source and destination.
We have 1 physical servers, we need to see. Here is the environment. All 3 separated location, 3 all firewall separated
1 physical servers
-Internal IP address; 172.16.160.21
-FARM FirewallvCenter Server
-Internal IP address; 172.16.1.85
-Local Office (ALX)
Location of destination (ESXi host):
-Internal IP address; 172.16.153.20
-Firewall ROOMMATE
Already completed:VMware KB: disable SSL on VMware Converter Standalone 5.x encryption SSL disabled in converter-worker
Firewall are open / Tunnel is open throughout the environment.
I have attached the logs.
Thank you very much
POCEH; Thanks for the reply. But I wouldn't be pulling my gray hair if I knew what the problem was. I understand that there not for the peer but why...?
-
Hi all
I'm having some trouble converting server physical windows using autonomous vConverter 5.5.
error message:
"An error occurred when opening a virtual disk. Verify that the Converter server and source running machines have network access to the ESX/ESXi hosts source and destination. "
I have attached the bundle newspapers. Please notify.
See you soon...
Your error is:
2014-11 - 04T 18: 27:27.587 - 08:00 [01236 info "Default"] GetManagedDiskName: Get disklib file name as vpxa-nfcssl: / / [a0110-vmgt70-001] WIN-MOVRCVCSITG/WIN-MOVRCVCSITG.vmdk@a0110tesxhyp01.datacenter.telenorservices.com: 902! 2 b 52 87 75 03 03 ff 49-67 2f 3 a 61 76 and 00 cd e1
2014-11 - 04T 18: 27:27.587 - 08:00 [01236 WARNING 'Default'] [, 0] NfcNewAuthdConnectionEx [NFC ERROR]: unable to connect to peer. Error: Failed to search for host for a0110tesxhyp01.datacenter.telenorservices.com server address: the requested name is valid, but no data of the requested type was found
2014-11 - 04T 18: 27:27.587 - 08:00 [01236 info "Default"] Sysimgbase_DiskLib_OpenWithPassPhrase failed with 'NBD_ERR_NETWORK_CONNECT' (error code: 2338)
Check the manual on the required ports.
HTH
-
Hello world
I get this error when I try to convert a machine, this machine are in the same network with others that I had no problem to convert, the error occurred in 1% complete. I tried several other suggestions from others posts, with no luck.
I have vmware converter 5.5.2. Someone at - it something idea?
Thx a lot.
Your error is:
2014 08-18 T 06: 49:12.641 + 02:00 [10064 "Default" warning] [, 0] NfcNewAuthdConnectionEx [NFC ERROR]: unable to connect to peer. Error: Unable to connect to the server cld01vmwh18.replycloud.prv:902
Need to allow access to the machine to be converted to cld01vmwh18.replycloud.prv:902
HTH
-
Hello, I'm trying to P2V server and you get this error.
Conversion from one physical host to vcenter.
I see with success, he creates the snapshot and crashes just after it.
Thank you in advance.
The error is: 2014-10 - 07T 19: 28:27.487 - 04:00 [warning 04752 "Default"] [, 0] NfcNewAuthdConnectionEx [NFC ERROR]: unable to connect to peer. Error: Unable to connect to the server 10.2.254.89:902
do you have to allow you access to your physical machine to the server ESX port 902
HTH -
Unable to set up a home network with XP
Hello
Tried to set up a home network, I'm having no success.
My dektop running XP Home Edition and connects on a Belkin N wireless router, which in turn connects to a cable modem for internet access.
I managed to put in place 3 laptops (1 on XP, 1 on Vista and 1 in windows7) to access the wireless internet via the router.
I had expected given the Office a central store for music and images and allowing laptops to access the information about it, but no matter how I try, I can't the Office to see laptop computers or laptops to see the desktop. The router DHCP information lists all the PC when connected.
I am at a total loss, could someone please?
Concerning
YianniWhat antivirus is installed on your computer? Disable the and their firewalls including windows firewall
http://TechNet.Microsoft.com/en-us/library/bb727037.aspx
http://www.howtogeek.com/HOWTO/Windows-7/share-files-and-printers-between-Windows-7-and-XP/
http://Windows.Microsoft.com/en-us/Windows-Vista/join-or-create-a-workgroup -
I have 2 computers that are running windows 7 prem 64 bit family. I'm trying to set up a home group, but does not recognize my extra computer. It is on the network. I have a netgear router wnd3500.
Hi Mark,
Thank you for writing to Microsoft Communities. The description of your problem, I understand that you have problems setting up a homegroup with Windows 7 computer. Please correct me that I misunderstood.
Mark, please don't worry I'll try my best to resolve the issue.
I suggest to go through the following websites, which provide a detailed description on the homegroup and how to set up.
Home Sweet homegroup
http://Windows.Microsoft.com/en-us/Windows7/help/home-sweet-HomeGroup-networking-the-easy-way
Homegroup from start to finish
http://Windows.Microsoft.com/is-is/Windows7/help/HomeGroup-from-start-to-finish
If you're still having trouble to set up the residential group, please let us know. We will be happy to help you.
-
Computer on the network where the printer is installed is running Win 2000 Pro.
Sharing is enabled on both, but cannot print. Troubleshooting utility was not to define and solve.
Desperately need help.
Thanks and congratulations to my Savior.This should work for you as well as it did for me:
http://www.SevenForums.com/network-sharing/7527-networking-printer-attached-win-XP-PC-win-7-a.html>It is said to Win7 and WinXP, but I was able to use it for a mixed network of WinXP (x 86), Win7 (x 86 & x 64) and Win8 (x 64). I can't imagine W2K is very different, or not at all. My printer is connected to the WinXP machine. If your PC Win7 a driver, there is a Windows Update available.
SC Tom
-
Remote Desktop does not work after trying to use it to connect outside my home network.
original title: Trouble with Remote DesktopRemote Destop worked very well with my desktop (Win 7 Pro) laptop (Win7 home prem) and then I tried to configure RD off-grid and now even can't do within the home group. Port 3389 is open, I checked. It also goes further than "Remote configuration connection" and then expires.
Is there a way to reset by default? If not, what are the default settings in Advanced Options?
Can't believe how difficult it is.
Well, a test of telnet with success from the RDC client to a host DRC looks like this. An empty window telnet with a blinking cursor.
http://CID-25ab668da65c8fbe.photos.live.com/self.aspx/Windows%20images/RDCSuccessfulTelnetTest.PNG
A fruitless of telnet test looks like this. You get a can't connect message.
http://CID-25ab668da65c8fbe.photos.live.com/self.aspx/Windows%20images/RDCUnsuccessfulTelnetTest.PNG
Based on the fact that PortQryUI reports that the DRC host is listening on TCP Port 3389, it seems to me that something on this machine is blocking incoming RDC connections if I read your log file.
You have run PortQryUI on the RDC client on your local network? Which will probably appear the same as the telnet test. Here is an example of a successful test of a DRC DRC host test client.
You run any third-party anti-virus/malware software?
You run a VPN client as a customer of Cisco for example? I've seen reports in the past of the clients VPN Cisco blocks requests from the DRC.
FWIW, you can take screenshots with Windows 7 built-in Snipping Tool and then publish them on SkyDrive and post links on the screenshots. Its easier than trying to browse a lot of ascii text... MY HUMBLE OPINION...
-
I am running Windows 7 and you want to allow a PS2 and XBox 360 access programs on the pc. Is this possible? How can I make my pc a media for a network server home?
Hello
Thank you for writing to Microsoft Communities.
I suggest to check the following links and check if it helps.
Connect to Bluetooth and other wireless or network devices: http://windows.microsoft.com/en-US/windows7/Connect-to-Bluetooth-and-other-wireless-or-network-devices
Add a device or computer to a network: http://windows.microsoft.com/en-US/windows7/Add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions
Establishment of a network domestic: http://windows.microsoft.com/en-US/windows7/Setting-up-a-home-network
You can also keep in touch with the Play station 2 and the Xbox 360 support.
Please follow these recommended steps and post if you still experience the problem.
-
Someone help me how to create the home group and how to connect two computers that are running windows 7. and also Remote Desktop connection!
step by step information!Hello
I suggest you to refer to the links and check if it helps:
Create a homegroup
http://Windows.Microsoft.com/en-us/Windows7/create-a-HomeGroup
Join a homegroup
http://Windows.Microsoft.com/en-us/Windows7/join-a-HomeGroup
Setting up a network home
http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network
Remote Desktop connection
http://Windows.Microsoft.com/en-us/Windows7/products/features/Remote-Desktop-connection
What types of connections remote desktop should I allow?
http://Windows.Microsoft.com/en-us/Windows7/what-types-of-Remote-Desktop-connections-should-I-allow
Remote Desktop connection: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/Remote-Desktop-connection-frequently-asked-questions
Let us know if it helps.
-
I've had this laptop for 3 years with no problems. One day last week when I tried to connect to my network home as usual, I get a message saying: more information needed, and he asks user name and PW domain name. All other wireless devices work as usual, only my Vista laptop. I never set it to connect to a domain. If I try to manually remove and reconnect to the network I get the same error. How can I remove this domain setting so I can connect to my home network as usual?
All the most popular tips...
PS You may have guessed that I am no computer wiz!
Thank you very much
Hello
Look at the configuration in Control Panel / System.
See here http://www.ezlan.net/Win7/group_name.jpg
Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET
-
Try to share files. OIOS sees files shared of the laptop, but the laptop cannot see the office. Have following settings 'walk' on two PCs... network discovery, file sharing, public folder sharing, and media.
Password protected sharing is 'off' in both computers. Printer sharing is disabled on laptop computer (not connected printers)... any help?Here are the procedures for Vista with Windows7 network layout that can help:http://www.windowsnetworking.com/articles_tutorials/Windows-7-Understanding-Network-Administration-Configuration.html.
Here is another article on home networks (with several links to related articles which must all be considered - as well as others, you will find in the related articles) to help you better understand the home networks: http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-home-network. If it's for Vista, much of it applies to Windows7 (although there may be some differences that should be addressed in the previous article).
Here is an article on the networking of the different versions of Windows:http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows.
I hope this helps. If necessary, start from scratch using these procedures and see if that helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Get a "not connected to the home network" error while trying to print
* Original title: printer problems
Hello I have a HP Officejet Pro 8600 that I bought at Best Buy, and I have printer problems, I ran the troubleshooting on my control panel from my computer and it says that it is not connected to the home network which can do on my end to fix, I'd appreciate any help, thank you very much!
Hi John,.
I will certainly help you in this matter.
-Have there been recent changes made on the computer before the show?
Method 1: Run the Microsoft Fix and check.
Diagnose and automatically fix problems printing and printer
http://support.Microsoft.com/mats/printing_problems/
Method 2: update the printer drivers and check.
Find and install printer drivers in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers
Update drivers: recommended links.
http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links
For more information, see the links.
Printer network problems (applies to Windows 7)
http://Windows.Microsoft.com/en-AU/Windows-Vista/troubleshoot-network-printer-problems
Why can I not print?
http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-printPrinter in Windows problems
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-WindowsIf the problem persists or you have any other questions, do not hesitate to let us know. It is our pleasure to be of service.
Thank you.
-
My desktop (host) is running Win7 Pro and my (client) laptop is running Win 7 Home Premium. For the office, I went to the control panel and allows remote connections. When I try to connect with the laptop in my same home network, I get an error message: Remote Desktop cannot connect to the remote computer you for one of the following reasons:
(1) remote access to the server is not enabled
(2) the remote computer is disabled
(3) the remote computer is not available on the network
Now, the computer is on and I can see what he listed as one of my computers on network. In fact, I accessed the command of remote desktop by right-clicking on the desktop in the list of networks and by selecting Remote Desktop in the menu dropdown.
Obviously, I am missing something or something wrong. Please help me to understand.
What do you call the remote [DRC] host desktop desktop machine, IE. local LAN IP static, the laptop?
See this help as possible...
http://theillustratednetwork.MVPs.org/RemoteDesktopTroubleshootingChecklist.html
Maybe you are looking for
-
My iMac recognizes my trackpad but will pair with her. I rebooted and just got my iMac back to the bluetooth card is replaced on the Apple Store.
-
I use 'Export waveforms for spreadsheet File.vi' in order to export the labview data into a file. However, the default format is the following: waveform [0]T0 13/11/2009 14:54:34Delta t 0.001000 time Y [0]2009-11-13 14:54:34 - 2.441406E - 32009-11-13
-
Where can I find the file: PRSDK.dll?
Hello I guess I'm not the one with this question or maybe I am. I am working on c# Csharp and I just registered and downloaded the EDSDK from Canon and package SDK from here: https://www.DIDP.Canon-Europa.com/developer/DIDP/didp_main.nsf?OpenDatabase
-
BlackBerry curve 8330 Smartphone battery life
Hi, I'm new to blackberry and love my Curve 8330, but I have to charge every 18 hours. I speak more than I did on my cell phone and was able to get a few days on a regular battery. Is there a way to get more life out of it? Thank you Luis
-
Migrate from ACS 3.3.2 SE to 4.2.1 for Windows
Hi all Disclaimer I know that the two platforms/versions are dinosaurs and we should be upgraded to something more recent like ACS 5.x. However, I am consultant and is not part of the decision to make this migration. I've just loaded to run. The c