I'm trying to restore access to my external hard drive.

Similar Questions

• How can I make a DVD of the restore hidden in my external hard drive partition recovery

  How can I make a DVD of the restore hidden in my external hard drive partition recovery because I want to recover my toshiba satellite L840 that does not respond directly to my hard drive so I put my laptop to an external HARD drive and then I want to copy a DVD recovery partition

  Your question is a bit confusing, you can boot the laptop at all? Have you tried booting in safe mode, you can make a recovery DVD set from there, the folder Toshiba.

  With the drive in the Toshiba, you should be able to use a F, F10, F11, or F12 key to activate the installation from the partition hidden started upward.

  Otherwise, you can contact Toshiba, and with the model of the product id number and the laptop for Windows, you can buy a set of disks.

• How can I access my Iomega external hard drive? When I plug it in it shows under COMPUTER.

  How can I access my Iomega external hard drive?  When I plug it into my USB port it shows on your DESKTOP.  I try to back up files on my external hard drive, but I can't get even the external hard drive on my computer.  Thanks for help.

  Hi Larryxcvb,

  1. what happens when you try to access the driver? You receive messages or error codes?

  2. other USB devices (USB key, etc.) recognized and works very well without any problem?

  3 is not detected the external hard disk on other computers?

  You can check the following link and try to run the Fixit of material.

  Hardware devices not detected or does not

  You can also visit the following iomega support article and see if it helps.

  What should I do if my Iomega USB hard drive is not assigned a drive letter or is not detected in Windows 7, Vista or XP?

  Hope this information is useful.

• How to restore my backup on external hard drive system

  I did a windows image backup of my Vista system on a Seagate external hard drive. Now I want to restore my system from the backup, but restore in control panel procedures does not recognize the files. Version of Vista professional, Service Pack 2. I tried Virtual PC, and vhd mounting procedures.

  Hello

  read this tutorial on how to do

  To restore a full backup of the computer, you must proceed within the Windows recovery environment. To access the Windows recovery environment, you will need to insert your Vista DVD in the DVD drive on your computer and turn on your computer. The computer starts and you see the BIOS lists the hardware on your computer, and other information. When this information has been disabled, your computer will see that a bootable DVD is inserted and present a prompt similar to the Figure 1 below.

  etc.

  etc.

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

• Access denied on external hard drive.

  I have an external drive, which works perfectly well. But I've just updated from vista to W7, and now I can not access the disk from that specific computer. I get access denied. On the properties, all users have full access. And the funny part is on my other computer, with the exact same OS, the drive works perfectly. So, I expect that there is a setting that I didn't know.
  Is there someone with good ideas on how to solve this problem?

  Hi I tried your instructions below to restore all my administrator permissions full on my external hard drive.

  1. click on Start , click all programs , and click Accessories .
  2. right click on command prompt , and then click run as administrator .
  3. in administrator: command prompt window.
  4. type
  takeown /F (external drive letter) and press ENTER.
  5 type
  CACLS (external drive letter) /G Administrator: F and press enter

  After that I followed these steps, my computer Windows 7 says that the drive is not accessible.  I plugged it to my old XP computer, and it also says "access denied."  I have a huge amount of important files there and I need to restore access, but I can't find an answer for how to cancel the steps I followed.  Please tell me how to reverse the steps I did your earlier suggestion.

• Access to an external hard drive in XP

  I have an external hard drive that was working well until a few days ago. When I recently tried to access, the drive was visible in 'My Computer'. However, when I double-clicked to open it, I got a message saying "insert disk". I tried on Windows 7, which produced similar results, as well as on a Mac, which does not recognize.

  I wonder if the external hard disk enclosure must be replaced. Although it comes on when turned on, I hear not a running engine as I did in the past.

  Try to run, type: diskmgmt.msc

  ' In msc, L.click hard disk, go to actions, all, select 'make active "".

  close when thru. If its already set to this, try to connect to another

  port, xp will reinstall it on reboot.

• Reinstalled Vista access denied on external hard drive

  I reinstalled Vista and now I can't access my external hard drive.  I tried to do a right click on the drive and to allow access for all users on the Security tab with no luck.  Help, please

  Please see how appropriating a file or a folder in Windows XP , which also applies to Windows Vista and Windows 7. Boulder computer Maven
  Most Microsoft Valuable Professional

• Cannot access files on external hard drive connected to Windows XP to Windows 7

  Original title: to access the shared files on an external drive using Win7

  I have created a shared folder on an external drive attached to my WinXP Home addition.  When I try to accIess to the shared folder on Win7 I see the folder but cannot access the files.  Yet when I create a shared folder on my XP I correctly read files.  Why can't access the shared folder on my external hard drive on my network

  Hello

  Do you get any error messages?

  Method 1:

  I suggest you to go through the steps mentioned in the link and the Coachman.

  Error message when you try to access a network Windows XP computer: "you might not have permission to use this network resource".

  http://support.Microsoft.com/kb/913628

  To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756/

  How to back up and restore the registry in Windows

  Method 2:

  I also suggest you go through the steps mentioned in the link and the Coachman.

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  In addition, we can see:

  Windows 7 & HomeGroup: share with other Windows XP and Windows Vista operating systems

  
  

  http://www.Microsoft.com/download/en/details.aspx?ID=17168

  Hope this helps and keep us informed if you need help.

• Access to an external hard drive

  Hi, I hope someone can help me understand this cause I'm running out of things to check.  I'm under Fusion Version 3.1.1 on a Macbook Pro with OS X Version 10.6.4.  I have a computer virtual running Windows XP PRO SP2 Build 2600.  I'm trying to connect a USB hard drive (Western Digital My Book Mirror Edition) external on the virtual computer.  When I connect the external hard drive, the virtual machine is able to recognize the drive as a USB device and connects to him.  I am able to go through the file structure and to read the data in the virtual machine.  But when I try to write to the disk of the virtual machine, all I get is a message "error copying file or folder.  The window basically says "cannot copy XYZ: access denied."  Make sure that the disk is not full or write protected and that the file is not currently in use. "I made sure all the files I'm trying to copy are not open.  I also checked the write to the target folder permissions and it seems to be in writing.  The hard drive is formatted in NTFS and there are hundreds of GB free.  Thanks for your time!

  What you describe resembles Windows ownership / permission settings do not allow to write.  Did you check the ownership / permissions for the root of the drive down to the folder that you want to write? Is your current user explicitly listed on the Security tab, or at least a group of your username is a member with Scripture, or all permissions?

  I don't think it of a matter of the merger itself, seems to be more a question of windows.

• No access to an external hard drive

  So I plugged my external hard drive in my macbook to move some files on it but it says "the disk you inserted is not readable by this computer." I clicked on initialize and he said: the hard drive is uninitalised and Mont and partition are grayed out. I ran the option of first aid, but he only said: the operation completed successfully. I am aware of that my external hard drive works because it is blue is lit and I used it a few days ago and it worked fine. I also plugged into another usb key I have and it works perfectly.

  Is there anyway for me to access my files on the external hard drive? I really don't want to lose my photos and files!

  The external hard drive is a tough drive 320 freecom.

  the light means power can get to the case, not the drive past any integrity checking. If the drive is older it may break or it could have been failure, or requires 3rd party software to allow full access, if it is NTFS formatted for windows and you use it on a mac.

  If you do not backup your data may be missing. If you start the boot disk process, you have already started to remove the files and more you try using that drive less whatever it is (if any) can be recovered.

  Freecom offers guarantees of 3 years on their mechanical hard drives but offers no guarantee with recovery of lost data (no company only)

  http://www.Freecom.com/warranty

  If your player is longer than 3 years its not rare that its failure and should be replaced with a new unit.

  In the meantime, you can try a 3rd party solution such as Disk Warrior or rescue for Mac to see if something can be saved, but still no service company forensic or data will always claim that they can do it with any degree of certainty to recover your data.

• How to: access files on external hard drive

  Original title: external hard drive

  I have connected my external hard drive "My Book Essential" and my computer it recognized and has an icon under drivers and printers, but I can't find a way to open or to acess the files on it

  Hello

  1. what operating system do you use?
  2. were you able to access this external drive without any problem earlier?
  3. have you made changes on the computer before this problem?
  4. what exactly happens when you try to access this drive? If you receive an error message then, send the same return.

  Your question does contain all the required information necessary for us to help you. Please re - write your question, this time make sure you have all the information necessary and we will try to help.
  Suggestions for a question on the help forums
  http://support.Microsoft.com/kb/555375

  The following article might be useful:
  Tips for solving problems of USB devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

• Windows 7 update history not showing after restore the Image of external hard drive

  I just restored windows 7 from a system image on an external hard drive.  When I used windows update after restoration update history had disappeared, although I found the updates in the updates installed, I wonder if something is wrong and if all my updates are in place and why did do that AND, can I GET BACK. ?. ?. ?. Everything seems to work fine... /.
  Thanks and let me know.
  Dave

  Hello

  The version history is just a list containing the results of the applied updates and non-operational systematics
  importance. The installed updates is the important file that shows what updates have been installed.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• trying to find compatible 1 TB external hard drive 2 TB capatible for backup of Lenovo T510

  I'm trying to understand what high speed 1 or 2 TB capatible external hard drive that I could buy - and if I can 'use' a USB 3 or if I'm stuck with USB 2.  Have you looked at LaCie and Verbatim discs... suggestions appreciated... I do not know what a PCIE card, etc. is...

  The Rosewill and others like it, are empty envelopes.  You install a HD 3.5 "SATA inside.  There are other - smaller - units that can use a 2.5 drive "a laptop.  These enclosures support different ways to connect to a laptop (or desktop): USB 2, 3 USB, eSATA, depending on the chosen box.  The boxes for disks 3.5 "have generally also a brick or"wall-wart"power supply.  2.5 boxes "sometimes do and sometimes are powered via the USB port.

  There are also many complete devices that provide an enclosure with a drive that is already installed.  They tend to be "prettier" and well integrated.  Also usually more expensive than a speaker + HD purchased separately (this varies) and in my experience, tend to run hot.

  You may prefer the comfort of a one-piece integrated solution, but I like the flexibility of an envelope + HD with my choice.

  [edit] The units come often (always?) with the included HD already formatted.  A speaker + HD provided by the user will require drive initializing and formatting.  A blank disc will at times be initialized in victory disk management by using the USB connection, before we see via the eSATA connection.  I don't know if it's a quirk of my speakers, readers, or Windows.  Just a heads-up.

  Z.

• If I have "Everyone" grant access to an external hard drive, which means that everyone connected to my network?

  I finally understood how to allow those that are related to my network to access my external hard drive, or so I think...

  If I have "Everyone" add to my safety for the external hard drive and I concede that "Everyone" control total, this means that these signed to my correct home network?

  I want to just make sure that the people not connected to my network (which is password protected) cannot access the hard disk.

  Thank you in advanced for your answer!

  Not everyone wants to say exactly that any connection to the drive can access. To restrict access, you must set the account in some way. In a workgroup, there is no definition of the global account for all accounts have access or each user must be explicitly included.

  Even all the computers in a home group have an additional account generated to allow cross access.

• Cannot start windows, impossible to reinstall windows, can't restore windows to the external hard drive or to an earlier point in time!

  I have a Dell studio 1535 laptop. When I start it the typical loading screen appears with Dell logo and the possibility to go to the installation or boot menu.

  If I leave this office, I go to the Windows Error Recovery screen with give me the opportunity to start the system restart or start windows normally. If I start windows normally, the loading windows screen comes up while the screen flashes blue with white writing (too fast to read) and I am referred to the Dell loading screen.

  If I select the Startup Repair tool, I come to a screen where I am asked to select my operating system, but the list is empty. It also shows if you don't see your operating system in the list then click loading drivers to load the drivers from your hard drive. He said now insert the device installation media, so I put in the installation CD for the drivers that came with my laptop. I browse through the files on the cd and select 1386 > R180982 > IAAHCI. This will display a list of drivers and I chose Intel(r) 82801HEM/HBM SATA AHCI Controller (I'll explain why later). However when I add this driver it says that the software that supports your device requires you to restart your computer. Also, if I check computer while browsing my HDD is not listed, which I think might be a problem.

  Furthermore, if I don't take any driver, and then click Next when I have 5 options. If I do the Startup Repair, it only takes a few seconds and said if repairs where succesful windows starts normally (which it doesn't).

  If I do the system restore an error comes up saying that, to perform an offline system restore, you must specify which windows installation you want to restore. By example, if the installation is in "C:\Windows" should be restored in the following command: rstrui.exe/OFFLINE:C:\Windows. I have it entered in the command prompt, it runs it sends me to the System Restore screen, but says that no restore points were created so that I can't keep (However, I know that I don't actually have the restore points.

  If I select Windows complete PC Restore it gives the error message "an internal error has occurred. The following information can help you resolve the error: the parameter is incorrect. (0 x 80070057) ».

  If I select Windows memory diagnostic tool and select Restart now and check for problems I get the error "Windows cannot verify the memory problems. A problem is preventing Windows from checking for memory problems during startup. Try to check the problems again by running the tool manually.

  I managed the Dell Factory Restore Image but that did nothing.

  And no, I can't reinstall windows.

  I have a Dell studio 1535 laptop. When I start it the typical loading screen appears with Dell logo and the possibility to go to the installation or boot menu.

  If I leave this office, I go to the Windows Error Recovery screen with give me the opportunity to start the system restart or start windows normally. If I start windows normally, the loading windows screen comes up while the screen flashes blue with white writing (too fast to read) and I am referred to the Dell loading screen.

  If I select the Startup Repair tool, I come to a screen where I am asked to select my operating system, but the list is empty. It also shows if you don't see your operating system in the list then click loading drivers to load the drivers from your hard drive. He said now insert the device installation media, so I put in the installation CD for the drivers that came with my laptop. I browse through the files on the cd and select 1386 > R180982 > IAAHCI. This will display a list of drivers and I chose Intel(r) 82801HEM/HBM SATA AHCI Controller (I'll explain why later). However when I add this driver it says that the software that supports your device requires you to restart your computer. Also, if I check computer while browsing my HDD is not listed, which I think might be a problem.

  Furthermore, if I don't take any driver, and then click Next when I have 5 options. If I do the Startup Repair, it only takes a few seconds and said if repairs where succesful windows starts normally (which it doesn't).

  If I do the system restore an error comes up saying that, to perform an offline system restore, you must specify which windows installation you want to restore. By example, if the installation is in "C:\Windows" should be restored in the following command: rstrui.exe/OFFLINE:C:\Windows. I have it entered in the command prompt, it runs it sends me to the System Restore screen, but says that no restore points were created so that I can't keep (However, I know that I don't actually have the restore points.

  If I select Windows complete PC Restore it gives the error message "an internal error has occurred. The following information can help you resolve the error: the parameter is incorrect. (0 x 80070057) ».

  If I select Windows memory diagnostic tool and select Restart now and check for problems I get the error "Windows cannot verify the memory problems. A problem is preventing Windows from checking for memory problems during startup. Try to check the problems again by running the tool manually.

  I managed the Dell Factory Restore Image but that did nothing.

  And no, I can't reinstall windows.

  Hey joeccash

  If you can not restore system reinstall windows etc you may have a hardware problem

  see if you can press F12 on startup to run dell diagnostics tools

  information on the dell below link

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&l=en&s=Gen&docid=DSN_A9E3A15597A04AFBB02EE16785D39C5C&isLegacy=true

  and below dell link has the factory recovery information

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&l=en&s=Gen&docid=DSN_336966&isLegacy=true

  If this does not help, try dell or a reputable computer repair persom

  Walter, the time zone traveller