I'm trying to set up a wireless network and it is said that something does not work with the driver.

Hi there tried to hook my laptop up to wireless as ethernet cable keeps me tripping. I am complete technophobe and propably have the only laptop that gets used especially to open the door.

Have tried everything I can think even threaten her with glass of water after trying to connect to the wireless network, that it is said that there is something that doesn't work not with the driver if it means something to you. I have a toshiba, if it helps.
Thank you
original title: I hope someone can help technophobe

It is said that there is something not working only not with the driver

You probably need to install some network drivers for your wireless card.

Download drivers

Visit the manufacturer's Web site and select your computer model (this is usually done in the Support section). You should be able to download drivers for your model. Download the driver (s) and follow the instructions to install - every computer is different, so I can't give you exact directions. You can also try to use Windows Update to get drivers - it is located in the start menu.

Establishment of a network domestic:


For more information network:

Start here to set up a home network in Windows 7:


What do I need to connect to Internet:


Adding a wireless computer

Set up a wireless network:


If your network is wireless, run the wizard to Set Up a network on the computer attached to the router.

1. open Set Up a network by clicking the Start button, then Control Panel. In the search box, type network, click Network and sharing Center click on set up a new connection or a network and then click on set up a new network.

2. the wizard will guide you in the process of adding other computers and devices to the network. For more information, see:


Manually add a wireless computer

1. sign the computer.

2 open the connect to a network by clicking the network icon in the notification area.

3. choose the network wireless from the list that appears and then click on connect.

4. type the network security key or password if you are prompted to do so, and then click OK.

-You will see a confirmation message when you are connected to the network.

5. to confirm that you have added to the computer, follow these steps:

-Open network by clicking the Start button, then Control Panel. In the search box, type network, and then, under center network and sharing, click on view network computers and devices.

Tags: Windows

Similar Questions

  • my browser cannot open google and facebook and other https sites that it does not open even the app store does not work, I tried to change my DNS google DNS and disable IPv6 but still no use, help PLZ!

    my browser cannot open google and facebook and other https sites that it does not open even the app store does not work, I tried to change my DNS google DNS and disable IPv6 but still no use, help PLZ!

    You may have installed one or more variants of the malware "VSearch' ad-injection. Please back up all data, and then take the steps below to disable it.

    Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

    Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

    Step 1

    VSearch malware tries to hide by varying names of the files it installs. It regenerates itself also if you try to remove it when it is run. To remove it, you must first start in safe mode temporarily disable the malware.

    Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for other instructions.

    Step 2

    When running in safe mode, load the web page and then triple - click on the line below to select. Copy the text to the Clipboard by pressing Control-C key combination:


    In the Finder, select

    Go ▹ go to the folder...

    from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

    A folder named "LaunchDaemons" can open. If this is the case, press the combination of keys command-2 to select the display of the list, if it is not already selected.

    There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. Please don't skip this step. Files that belong to an instance of VSearch will have the same date of change for a few minutes, then they will be grouped together when you sort the folder this way, which makes them easy to identify.

    Step 3

    In the LaunchDaemons folder, there may be one or more files with the name of this form:

    com Apple.something.plist

    When something is a random string, without the letters, different in each case.

    Note that the name consists of four words separated by dots. Typical examples are:

    com Apple.builins.plist

    com Apple.cereng.plist

    com Apple.nysgar.plist

    There may be one or more items with a name of the form:


    Yet once something is a random string, without meaning - not necessarily the same as that which appears in one of the other file names.

    These names consist of three words separated by dots. Typical examples are:



    Sometimes there are items (usually not more than one) with the name of this form:

    com.something .net - preferences.plist

    This name consists of four words (the third hyphen) separated by periods. Typical example:

    com.jangly .net - preferences.plist

    Drag all items in the basket. You may be prompted for administrator login password.

    Restart the computer and empty the trash.

    Examples of legitimate files located in the same folder:


    com Apple.Installer.osmessagetracing.plist

    com Apple.Qmaster.qmasterd.plist

    com Apple.aelwriter.plist

    com Apple.SERVERD.plist

    com Tether.plist

    The first three are clearly not VSearch files because the names do not match the above models. The last three are not easy to distinguish by the name alone, but the modification date will be earlier than the date at which VSearch has been installed, perhaps several years. None of these files will be present in most installations of Mac OS X.

    Do not delete the folder 'LaunchDaemons' or anything else inside, unless you know you have another type of unwanted software and more VSearch. The file is a normal part of Mac OS X. The "demon" refers to a program that starts automatically. This is not inherently bad, but the mechanism is sometimes exploited by hackers for malicious software.

    If you are not sure whether a file is part of the malware, order the contents of the folder by date modified I wrote in step 2, no name. Malicious files will be grouped together. There could be more than one such group, if you attacked more than once. A file dated far in the past is not part of the malware. A folder in date dated Middle an obviously malicious cluster is almost certainly too malicious.

    If the files come back after you remove the, they are replaced by others with similar names, then either you didn't start in safe mode or you do not have all the. Return to step 1 and try again.

    Step 4

    Reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select

    ▹ Safari preferences... ▹ General

    and click on

    Set on the current Page

    If you use Firefox or Chrome web browser, remove the extensions or add-ons that you don't know that you need. When in doubt, remove all of them.

    The malware is now permanently inactivated, as long as you reinstall it never. A few small files will be left behind, but they have no effect, and trying to find all them is more trouble that it's worth.

    Step 5

    The malware lets the web proxy discovery in the network settings. If you know that the setting was already enabled for a reason, skip this step. Otherwise, you should undo the change.

    Open the network pane in system preferences. If there is a padlock icon in the lower left corner of the window, click it and authenticate to unlock the settings. Click the Advanced button, and then select Proxies in the sheet that drops down. Uncheck that Auto Discovery Proxy if it is checked. Click OK, and then apply.

    Step 6

    This step is optional. Open the users and groups in the system preferences and click on the lock icon to unlock the settings. In the list of users, there may be some with random names that have been added by the malware. You can remove these users. If you are not sure whether a user is legitimate, do not delete it.

  • HP laserjet p1102w: wireless printer does not work with the new wireless network

    My office moved recently and we have a new wireless network. My printer always wireless worked perfectly on the previous network, but it does not work with the new network. I get a message "the printer is offline. I don't know how to reconfigure so that it detects the new wireless network. Can anyone help? Thank you

    Hi Shlomi,
    Thanks a lot for the info. I'll give it a try today...

  • Wireless camera does not work with the new router

    Hello, I'm having a problem with a camera D-Link DCS932L after you set up the EA4500.  The manual of the camera can be found here.

    http://d2okd4tdjucp2n.CloudFront.NET/DCs-932L_A1_Manual_v1.00 (NA) - en.PDF

    It worked fine with my old D-Link router.  The rest of the House has not had a problem with the EA4500.  There is a level of criticality around this camera certail and if I can't make it work, I'll have to return the router.  Configure the redirection of port as 5556 ~ 5559, TCP protocol (but I tried "Both" as well"with the IP address of the camera.  It still does not work.

    I craft but not in networks, i.e. I'm not stupid with tech but port quarrels is out of my comfort zone.  This camera with our old router setup took minutes.  I spent five hours trying to make it work on the EA4500.

    I guess you have the static IP value, or having a reserve of DHCP MAC address for the camera, network OK settings.

    What was the authentication wireless on the old router and that you use the new 4200?

    Is it possible that the camera does not support the encryption used by the 4200, i.e. wpa2-personal?

    Have you tried WEP to see if the unit works then?

  • Router WRT54G wireless does not work with the new modem

    Hi, I use my router WRT54G (Firmware version v2.02.7) on 4 computers for more than four years now, without any problems at all. However, today I had to replace my old modem with a brand new modem Speedtouch from my supplier, and although I made sure each cable has been connected properly, it just doesn't.

    The connection between my PC and the router ( is good, but the problem must be between the router and the new modem. When I click on 'Status', he said: ""connection status: disconnected".

    After clicking on the 'Connect' button, it tells me that it "can not connect to the PPTP serverbe"

    Help, please

    Hi Matt,

    Although the resolution of this problem was a little simpler, I still thank you for your answer.

    The neighbor boy came up with the following response:

    «It just check the Type of Internet connection, cause you got an old type of modem before.» It will probably be set to PPTP. If this is the case, simply change it to "Automatic DHCP Configuration", click on "Save Settings" and everything should be ok then"

    And he was right!

    I am so happy



  • Wireless printer does not work with the laptop running Windows 7

    Running Windows 7 on my HP laptop.  Have HP Photosmart all in one and scheduled to run through the Setup program on the printer wireless.  When I print a doc goes to the printer IT does not print on paper.  Find CD for printer.  It is not compatible with Win 7 then went to HP & downloaded driver.  Still can not get kicked out of the doc.  What to do next?

    The following Support HP for the Photosmart Wireless all-in-One deals with the issues where there is no response from the printer: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02205477&tmp_task=solveCategory&cc=us&dlc=en&lang=en&lc=en&product=4022343
    They also have diagnostic utilities that can help: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03291586&cc=us&dlc=en&lang=en&lc=en&product=4022343

    and the additional support: http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&dlc=en&lang=en&lc=en&product=4022343&

  • I am trying to download internet explorer 9 for windows xp 32-bit, and it is said that he does not support what I have... Help please?

    try to upgrade to IE 9 and I have windows xp, it does not support it... help please, says

    If I switch to IE 9 then I need to upgrade to windows 7... and it is probably not a free update for 7

    most likely, you will need to buy win7, before moving on to ie9...

    How much memmory your pc in there?

    I used a dell, Windows XP 32-bit, 4 GB memmory desktop pc, it works fine.

    but, like you, when looking at upgradeing to win7 and because everything today is 64 bits and manufacturers is phaseing on 32-bit almost everything. I chose to tighten teeth to talk and go for win 7 64 bit and a pc with a motherbourd and a chipset that is not obsolete modern day after tomorrow.

  • Why Microsoft Security essenctials does not work with the set of parameters

    Microsoft Security Essenctials going to run a full scan at a specific time, and still is not, why?

    Is your computer in mode 'sleep' when the scheduled scan?  If so, that would be the reason the scan works.  There is a discussion about this and some methods to deal with: http://answers.microsoft.com/en-us/protect/forum/mse-protect_scanning/hibernating-laptop-and-scheduled-scan-not-starting/a848b902-dd6c-45ce-a472-c90ce400ec84

    There are a large number of other MSE sleep related discussions to the next search: http://answers.microsoft.com/en-us/Search/Search?SearchTerm=security+essentials+sleep&CurrentScope.ForumName=Protect&CurrentScope.Filter=&askingquestion=false

  • Wireless Microsoft notebook optical mouse does not work with g42 - 410 us laptop

    Wireless Microsoft notebook optical mouse does not work with g42 - 410 us laptop

    Hi Mary,

    Did you install all the necessary drivers, firmware and/or software Intellisoft of the mouse and then restart?

    You have good batteries in the mouse?

    Verify that the mouse is compatible with working computer and your operating system?

    Have you checked the mouse icon in the control panel (after all of the above) to a setting to activate?

    Contact the vendor of your computer and see if you need to update something else.  When I installed my wireless mouse, it wouldn't work until I updated the touchpad, the firmware drivers and.

    Good luck!


  • Audio does not work with bootcamp drivers on windows 10 6 (tried on macbook pro 13 mid-2012). Is there a solution?

    Audio does not work with bootcamp drivers on windows 10 6 (tried on macbook pro 13 mid-2012). Is there a solution?

    You have all Audio devices in Device Manager? How Windows 10 has been installed on the Mac? The BC Assistant has been used?

  • Cannot install WIndows XP SP3 - wireless adapter does not work with any package of service beyond 2.0

    original title: wireless adapter does not work with any package of service beyond 2.0

    I have an AirLiink 101 wireless adapter.  Anyone know how to change the service pack 3.0 for me to update my Windows XP?   Can not install 3.1 without losing wireless connection.

    Thanks for any help.

    If you are on a wireless connection, try to switch to a wired connection and try the download with Internet Explorer.

    UTC/GMT is 06:49 on Wednesday, April 11, 2012

  • my pc will not connect to wireless internet... It is said there could be a problem with the driver for the wireless network connection card

    connection network card

    my pc will not connect to wireless internet... It is said there could be a problem with the driver for the wireless network connection card... I'm not sure how to solve the problem of the dat


    Did you change your computer?

    I suggest you to follow the links and check out them.

    The problems of Internet connection


    Solve problems, find wireless networks


    Windows wireless and wired network connection problems


    Tips for solving common driver problems


  • Windows Vista does not work with modem wireless broadband

    I saw no answer to this problem.  Can anyone help?

    Windows Vista on my DELL laptop at home does not work with my new NETGEAR modem wireless broadband 3 G.  The modem appears in the list of networks, I just errors like: unable to connect, cannot diagnose,... Both devices work perfectly well together when connected by cable but not wireless.  Interestingly, my laptop work, also a DELL but runing Windows XP, works very well with the NETGEAR modem.

    Vista / Netgear wired - work
    Vista / Netgear wireless - does not work
    XP / Netgear wireless - work

    I went through the NETGEAR troubleshooting guide, doing everything from changing the types of security to manually enter the MAC address of the laptop.  I ran to the ground with the NETGEAR support engineers, and they said check with Microsoft.  I am convinced that it has something to do with Vista.  Any ideas?

    Hi jhandcc,

    Please provide the complete error message you receive.

    Step 1: You can follow the steps described in the article below

    Error message when you try to automatically connect to a wireless access point that uses authentication of network shared in Windows Vista: "Windows cannot connect to" "



    If the problem persists,

    Step 2: Download and install the latest service pack for windows vista on the computer

    How to obtain the latest Windows Vista service pack




    You cannot connect to a wireless network on a Windows Vista-based computer



    For more information, see the link below

    Solve problems, find wireless networks


    Let us know if this helps

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • my wireless keyboard does not work on the letter and number keys.

    It seems to be connected to the computer, because it does not work on the control button and snooze sound


    -Have you made any recent hardware / software changes prior to this question?

    -What is the brand and model of wireless keyboard?

    Method 1: run the hardware troubleshooter.

    Open the hardware and devices Troubleshooter

    Method 2: update a hardware driver that is not working properly

    (a) open Manager devices by clicking the Start button, click Control Panel, click System and security, and then, under system, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    (b) in the list of hardware categories, find the device you want to update, and then double-click the device name.
    (c) click on the driver tab, click Update driver, and then follow the instructions. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    Method 3: resynchronize your device with the receiver

    To resynchronize the mouse or the keyboard with the receiver, follow these steps.

    Note When you synchronize the mouse or the keyboard le clavier with the receiver, place the device near the receiver and store other keyboards and wireless mouse at least 6 feet.
    1. press the button on the receiver and check that the light on the receiver starts flashing.
    Note Some newer devices from Microsoft are subject to their receiver and cannot be reset. If your device has a button, go to method 2.
    2. If a dialog box appears on the screen in seconds, follow the instructions that appear on the screen. Otherwise, continue to the next step.
    3. press and release the Connect Channel button on the bottom of the mouse or the keyboard.
    4. check the green light on the receiver. A continuous green light means that the synchronization was successful. If the problem persists, repeat steps 1 to 4.
    5. for the Wireless Notebook Mouse: this issue can occur if the micro-switch on the bottom of the mouse is not released. Use a PIN or pen to try to release the button, if it is pressed.

    Hope this information helps.

  • I got a message from paypal saying that my plan has expired. I tried to renew my subscription and update my details however it does not work. What should I do?

    I got a message from paypal saying that my plan has expired. I tried to renew my subscription and update my details however it does not work. What should I do?

    A few changes/Verify account https://forums.adobe.com/thread/1465499 links that can help

    -Credit card https://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting-cr creative - cloud.html


    Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

    Don't forget to stay signed with your Adobe ID before accessing the link below

    Creative cloud support (all creative cloud customer service problems)


Maybe you are looking for

  • Internal standby mode keyboard and Trackpad no longer work after

    Since last week, after the "sleep mode" most of the time the keyboard and trackpad not working. External keyboard / mouse works via USB. If I reboot in safe mode, reset the NVRAM / PRAM / SMC, it seems to work for awhile yet. Has not installed a new

  • Alpha Antivirus help

    I went into safe mode to download the program, but my mouse does not work. How to navigate mode safe?

  • C309a all-in-One Printer

    I had a paper jam and when I removed the photo tray to the book it was released in two parts.  One is the sandbox where I've actually put photo paper and the other is the part that it fits.  He don't slideback not together, and I'm afraid that if I t

  • Images still appear too pixelly designing with still on high quality screen

    I find it really difficult to design in indesign lately as even on the highest setting the images appear pixely in preview. Aligning several images ontop of each other or make a pixel perfect design is really a lot of time.My CPU and graphics card is

  • Can I install VCLI in vCenter

    HI: I q I can install VCLI in vcenter server windows or not documentationPost edited by: a.p. - changed the title to 'Hi' to 'can I install VCLI in vCenter.