I'm trying to sync my iPad with my laptop. When I connect my iPad to my laptop, I get a blue screen and my laptop stops.

I have iTunes installed on my laptop

.

Get code error on their website or contact Apple technical support.

Tags: Windows

Similar Questions

  • I get the blue screen, and sometimes my computer freezes just with the vista blue ring

    ORIGINAL TITLE: Major error

    Hello

    Im having huge problems with my PC and Vista.I get blue screen of death and sometimes I don't quite understand, my computer hangs with just the blue vista ring go right around and around. In addition, windows update won't work, but

    I did a search on blue screen errors and found a program that told me which are originally the erros. The details are below:


    crash dump file: C:\Windows\Minidump\Mini042712-01.dmp
    This was probably caused by the following module: ntkrnlpa.exe (nt + 0xCDB3F)
    Bug check code: 0x77 (1, 0 x 0 0 x 0 0 x, 0xFFFFFFFF8891BC70)
    Error: KERNEL_STACK_INPAGE_ERROR
    file path: C:\Windows\system32\ntkrnlpa.exe
    product: Microsoft® Windows® Operating System
    company: Microsoft Corporation
    Description: NT Kernel System &
    Bug control description: this bug check indicates that the data page of the kernel of the required paging file cannot be read into memory.
    The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

    crash dump file: C:\Windows\memory.dmp
    This was probably caused by the following module: ntkrpamp.exe (nt! KeBugCheckEx + 0x1E)
    Bug check code: 0x77 (1, 0 x 0 0 x 0 0 x, 0xFFFFFFFF8891BC70)
    Error: KERNEL_STACK_INPAGE_ERROR
    Bug control description: this bug check indicates that the data page of the kernel of the required paging file cannot be read into memory.
    A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: ntkrpamp.exe.
    Google search: ntkrpamp.exe KERNEL_STACK_INPAGE_ERROR

    Any ideas, also my windows update does not work? Could it be related to that?

    Thank you

    Phil

    Hello

    You did changes to the computer before the show?

    Follow the methods below to work on the issue.
     
    Method 1:
    The error occurs if thard drive there no matter what bad sectors or other problems. VOU can use disk check and verify commands:

    a click Start, type cmd in the start search box, right-click cmd in the list of programs and then click on run as administrator. If you are prompted for an administrator password or a confirmation, type your password, or click on continue.
    b. at the command prompt, type Chkdsk/f and press ENTER.
    c. press y when you are prompted to check the drive the next time the system restarts.
    d. close all applications and restart the computer. Note When you restart, Windows checks the drive for errors, and then starts.
    e. once the computer has restarted, try to perform the backup and restore.
    Warning: We recommend not to interrupt the CHKDSK process. Microsoft does not guarantee the integrity of the disk if the CHKDSK program is interrupted. For security, you can back up your data before using check disk drive.

    Method 2:
    You can make the diagnosis of memory problems on your computer.
    http://Windows.Microsoft.com/en-us/Windows7/diagnosing-memory-problems-on-your-computer

    Method 3:
    You can also perform a clean boot and check.
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: After you perform a clean boot, perform step 7: reset the computer to start as usual to the above article

    See also the link to learn more:
    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
    http://support.Microsoft.com/kb/958233

  • I am trying to sync my ipod with my windows media player and when I connect my ipod windows media play is not read. How can I sync my ipod with windows media player?

    I am trying to sync my ipod with my windows media player and when I connect my ipod windows media play is not read. How can I sync my ipod with windows media player?

    Hello

    Your MP3 player should have 2 settings - MSC that should allow the player to be used as a
    external drive and PSG that is the parameter to use to sync with WMP11. Remove the MP3
    and restart the computer. Change the MP3 in MTP mode - it power off and plug it in.

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • I tried to sync my ipod with my iTunes after the addition of new music, but when I tried it could not synchronize?

    the error is '1156' apparently 'others' files is full and not audio files that I check to see if they took up a lot of memory, but they don't I also dumped more music that I added but still didn't work I also checked the calendar, SMS, apps, and other programmers like that but nothing happened and the 'other' bar still takes most of the capacity on my iTunes when it does not still took half of what my audio did before I tried the sync. Does anyone have any suggestions.

    Hello

    I suggest you to refer to the articles and check if it helps.

    iTunes: synchronization of multimedia content for iPod and iOS devices

    http://support.Apple.com/kb/HT1351

    iTunes: iTunes Store advanced troubleshooting

    http://support.Apple.com/kb/TS3297

    If the problem persists, I suggest you to contact the Apple Support for assistance on this issue.

    Apple Support communities:

    https://discussions.Apple.com/community/iPhone/accessories?view=discussions

    I hope that helps!

  • How to sync my IPAQ with Windows XP when my PC Media Player version is not compatible with Windows Media Player 10

    I'm trying to sync my IPAQ with my pc. It is said: this version of Windows Media Technologies is incompatible with this version of Windows.

    Hi shawnwhite,
     
    -What is the model number of the IPAQ device that you are talking about?
     
    Media Player 10 is supported by the following models (h1930 and h1940) of the IPAQ device:
     
    For more information, see the section "what version of Windows Media player iPAQ Pocket PC h1930, h1940, and models are supported?' from the link below:
     
     
    Check if this link helps you:
     
  • Want to sync an iphone with 2 laptops (itunes) with the same account ID

    Hello

    I'm new on this forum, before writing I googled my request, but did not get the exact answer to my problem.

    Perhaps my response was already supported and somehow I missed it.

    I have:

    1: Personal Iphone

    1: personal laptop (ITunes installed with a/c Id)

    1: portable desktop (ITunes installed with the same Id of a/c)

    Description of the problem:

    I want to synchronize my calendars/meetings (Outlook) with my laptop with my personal Iphone desktop.

    Currently what I do and its working perfectly.

    But by the standards of my company/rules, we should not keep any songs/video / / personal snaps/novels (pdf/ebub) on laptop desktop

    So all the animals mentioned above, I used on my laptop.

    Now, I need to sync my Iphone with:

    Laptop Desk to Calenders and prospects for the animals and

    Personal laptop for songs/video / / personal snaps/novels (pdf/ebub)

    should both work without removing other sync

    Is it possible to do?

    It will not work.

    For synchronization purposes, you can have 1 'master '.

    You can use iTunes to synchronize a selection of content and for the other icloud.

  • WANT to PC dv7: at startup, I get a blue screen with a :( Your PC has encountered a problem and needs to restart.

    While I was using my laptop I received a message that HP was running some sort of program disagnostic and in the end, he asked if I wanted to repair the problems. I declined the offer. However, the next time I turned on the computer, I saw the first time the HP logo, then the message "automatic repair Preparation". After a few seconds there is a short rectangle that flashes on and disappears. Then I got a blue screen with: your PC encountered a problem and needs to restart. We will restart for you. "Who starts a blue screen and reboot cycle. Blue screens replacement error messages saying: "If you want to learn more, you can search online for later for this error" and once it will say 'FAT file system' and once 'NTFS file system. I have spent to support HP dv7 ENVY page and tried the suggestions of repair without success. Is it possible to go beyond these two error messages and their blue screens to get my system working again? If so, how?

    Hello

    Error code 24 characters is a failure of the short test (DST) disk Self and would indicate that hard is defective and must be replaced.  It is also consistent with your description of the problem.

    If your laptop is still under warranty, contact HP and arrange for the disk replaced - if necessary, you can check the status of your warranty here.

    If you live in the United States, contact HP here.

    If you are in another part of the world, begin here.

    If you are no longer under warranty, it's a fairly simple procedure to replace the HARD drive yourself - a brief guide on this is below.

    Readers on the following links are examples that would be perfect for your laptop.

    Hard drive 500 GB

    750 GB hard drive.

    1 TB laptop hard drive.

    The procedure to replace the hard drive begins on Page 56 of your maintenance & Service Guide.

    About reinstalling Windows 10 on new HARD drive, as long as the previous installation of Windows 10 had activated Ok after upgrading to Windows 7/8.1, you can simply create your own Windows 10 installation media and perform a new installation as described in the guide on the following link.  Note: On the activation screen, select "I have not a product key" - Windows will activate automatically once installation is complete.

    http://www.howtogeek.com/224342/how-to-clean-install-Windows-10/

    Kind regards

    DP - K

  • Had to reformat my hard drive, now when I try to reinstall Windows XP I get a blue screen with this code at the end 0x0000007b.

    has had to reformat my hard drive now when he star0x0000007b (0x78d663c, 0xc0000034, 0x00000000, 0x00000000)

    has had to reformat my hard drive, now when I try to reinstall windows xp, I get a blue screen with this code at the end 0x0000007b (0x78d663c, 0xc0000034, 0x00000000, 0x00000000) how to solve this problem

    Hello

    I saw the 0x0000007B BSOD caused by trying to install XP on a disk hard while the BIOS is designating the reader as AHCI instead of IDE. XP has no native AHCI drivers, resulting in a stop 7B. Unless the PC had originally Vista or Win 7, but it might be useful to check that it is not likely.

    If the BIOS is set to AHCI, you could do one of three things (depending on whether your PC has a floppy drive)...

    1 find the Setup F6 disk on AHCI support at installation time (start with the manufacturer's website if you do not already have such a thing). Watch the very hit F6 prompt early in the installation process.

    2. change the setting in BIOS on IDE / ATA

    3. create a new "slipstreaming" installation disc drivers AHCI in the existing installation disc, see http://www.nliteos.com/index.html

    After the back if your BIOS is IDE / ATA

    Tricky

  • Windows XP does not start, I get a blue screen with STOP: 0x0000007E (0 x 0000005, 0 xC0000001, 0xF7AA13D4, 0xF7AA1D0)

    so I used Spybot S & D to get rid of a virus on my computer that I thought was spyware. (basically what made the virus was redirect all my research on google for websites ad). After what's happened, he said I had to reboot my computer so I don't, Spybot run and then asked me a bunch of changes and whether to 'allow' or 'ignore' or 'refuse the change. I don't know if this has caused, but I clicked on 'allow' or 'deny change' for many of them, and then neither firefox nor IE would work because both would be would break whenever I tried to use them.

    so to remedy THIS problem, I tried to use "System Restore" last week when my laptop was working fine, but the system restore everything screwed up my worst computer. Now XP will not boot even upward, and I get a blue screen with the error "STOP: 0x00000007E (0 x 0000005, 0 xC0000001, 0xF7AA13D4, 0xF7AA1D0) ' and its a cycle with no end of restarting but XP never works.

    I tried the safe mode, last good configuration, all these options, known and none got XP to start.

    I am so lost on what to do, can anyone help me?

    Thanks for all your comments

    rdjfdhar,
    Thanks for posting on the Microsoft answers Forum.  If you can try to boot mode safe mode with command prompt, and then run the following commands.

    Chkdsk /r

    http://support.Microsoft.com/kb/315265

    sfc/scannow

    http://support.Microsoft.com/kb/310747

    If you cannot start mode safe mode with command prompt, then you need to boot from your XP CD recovery console and run these commands.  Post back with the results.

    Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Bluescreens Vista laptop with ndis.sys when I connect Xbox 360 via Ethernet

    I have a laptop with Windows Vista HPG5056EA. When I connect my Xbox 360 with an Ethernet cable, it bluescreens with the message:

    "DRIVER_IRQL_NOT_LESS_OR_EQUAL"... to it also States:

    ' * STOP: 0X000000D1 (0 X 00000200, 0X00000002, 0X00000000, 0X82D4CBA1).
    NDIS.sys - address 82D4CBA1 base at 82C7D000, DateStamp 479190e7 ".

    To do this, no bluescreen at any other time. only when I connect the Xbox 360 to it.

    I looked all over the internet and can safely rule out bad ram (as I changed it and the problem still happens).
    Others have said that it is to do with the Realtek network adapter that is installed. I've updated this to the last version of driver with no improvement.

    This problem has happened twice. The first was after installing some software Nero. I have uninstalled and rebooted and things were very good.

    The second time was after installing software Ashampoo. I removed that too and things were good again.

    This time, the only thing I installed before getting the blue screen is Microsoft Silverlight.  I uninstalled it but the blue screen issue continues.

    I tried to use system restore too but the problem remains.

    I tried to access the mini dump after the blue screen file, but the ' C:\Windows\Minidump\ folder is always empty, even if I choose 'partial memory (64 KB) image' in the "Write debugging information" parameters. "
    (Some have said that the issue of minidump could not have enough memory, so with my laptop with 2 GB of RAM, I put the pagefile 3072 and had at least 7 GB of hard disk free space but I don't always get the minidump file).

    If anyone can help with the blue screen I would be really really grateful that I no longer us Xbox Live.

    Features of the laptop:

    Windows Vista 32 bit
    RAM: 2GB
    Processor: Intel T2080 1.73Ghz (Dual Core)

    Thanks for your quick response. I had already tried most of what was suggested before you put this question up, without success.

    However, I apparently managed to fix the problem (for now at least) using Device Manager to completely uninstall the Realtek network adapter and remove the driver. I restarted the laptop after this and Windows reinstalled automatically and hay presto, no blue screen when connecting to the Xbox!

    I don't know if this is a permanent solution but if it starts to happen again, I'll try the same and let you know.

    Thanks again

  • What is blue screen and what to do and how to fix this with out taking back to factory setting and reinstalling Vista

    What is blue screen and what to do and how to fix this with out taking back to factory setting and reinstalling Vista

    When a BSOD (Blue Screen of Death) the system failure occurs, for most users, there not enough time to fully record what he says. the exact text is important for anyone trying to diagnose what is wrong. You can save time when the error occurs then by following the procedure described below.

    If you already did it disable the auto reboot system error. This should help by allowing the time to write the code to Stop error and related information correctly. Select Start, do a right-click on computer select Properties, advanced, system settings startup and recovery, system failure and uncheck the box before automatically restarting. Re-do not enable automatic restart in the event of system failure after obtaining this information, this setting is the best left to not allow an automatic restart.

    If the failure occurs during the initialization of the computer, you need to try a different approach. You can access the Advanced Options Menu of Windows on multiple computers by constantly pressing the F8 (key) key when starting and selecting the option - disable automatic restart in case of system error. This method is not always easy to use because it may be difficult to press the F8 key at the right time. Try again if it doesn't work the first time. On some computers, a different key must be used.

    Send a copy of your dumpfile as a shared file on your disc of sky with a link here.
    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  • Why do I get the error message: NO. CHM with error 2: when you connect windows 7

    My husband clicked on a video from Break.com and after 3 seconds, the screen started jumping and making a static noise then shut down.  It restarts, but we ended up getting a blue screen which eventually do a windows repair, System Restore... etc.  Later, thinking it was a virus, I was able to do a scan, but it did not help.  I took the computer to someone else who tried a few things, anti-virus, one of them, but no virus has shown.    I was trying to get out of fashion "sleep" after using it successfully for months to happen, and you have disabled since this mode.  Now it's blindly for the computer to boot.  I'm not a techie or computer wiz, but I need to know what I can do.  I have an Acer Aspire with Windows 7 64 bit.  Now, when I log in I also get the error message. CHM with error 2:

    Thank you

    Hello

    I suggest you use the scanner online and check if it helps. To do so follow the link below:

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Method 1:

    Check the event viewer for the defective program or application that is the source of the problem:

    http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

    Method 2:

    I suggest to start in safe mode and check if the problem persists. To do so follow the link below:

    http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

    Step 1:

    You can also put your computer to boot and check for the issue:

    http://support.Microsoft.com/kb/929135

  • I get a blue screen with an error 0x0000007A code.

    Original title: BSOD 0x0000007A ataport.sys

    Salvation to the whole community.

    First of all, I want to say sorry for my English, I'll try to answer as welle as I can! =)
    So here's my problem.
    I got a BSOD when using, or not, my computer. It seems at any time, and I don't know why.
    I took a photo of the blue screen, and I can provide it.
    I tried I tried to uninstall the antivirus software and latest software that I installed it, but the problem is the same. I disconnected the 3 HD and still BSOD.
    The BSOD is:
    KERNEL_DATA_INPAGE_ERROR
    STOP: 0X0000007A (0XFFFFFFFFC000000E, 0X00000000B5F7E860, 0XFFFFF6FC400084E8, 0XFFFFF8800109D93C)
    ataport.sys - address FFFFF8800109D93C base at FFFFF8800107F000 DateStamp 4ce79293
    Data collection for the crashdump...
    Initialization of the disk for the crashdump...
    I installed win7 last Sunday, and the BSOD appears in this week.
    Maybe the drivers GeForce?
    What should I do next?
    PS: I forgot to say: operating system is installed on an SSD. I ran chkdsk and no problems were detected. I have a 1 TB samsung drive too and the 3To WD drive.
    I reinstalled Win7 after a crash of one of my Corsair memory. It works very well for a year before that.
    Thanks for help.

    Ok!

    My computer is running for a few hours with no BSOD more.
    My problem is solved. If the problem was with the Firmware of the SDS for the Crucial M4.
    Thanks for all the help and I hope that will solve all the problems for other users ;)
    Best regards
    Judicaël.
    You can close this topic.
  • Workin in Live View mode when I press the zoom button to focus, I get a white screen with an x 5 or a wr 10 x

    Working in Live View when I press the zoom button to focus, I get a white screen with an x 5 or x 10 written.  I do not get the image of zoom.  He just started this today and I used it for years.  Any help?  Thank you.  OH, I have a 450 d (rebel xsi)

    Thank you very much

  • Computer will not start with Windows. I get a black screen and a blinking cursor.

    Windows XP Home Edition startup problem

    I have Windows XP Home Edition, but the computer does not start at the top.  I get a black screen and a blinking cursor.  I have an XP installation disc.  I was in the Recovery Console to recover all of the standard tasks, but nothing helped.

    Brand, model and model number of your PC?

    Are you able to get into the BIOS?
    What took place prior to this problem?
    For now, you can read this to get some ideas:

Maybe you are looking for