I'm unable to access my LR5.7 of my recent holiday catalog. I am running Windows 7 (64-bit) and recently installed and then uninstalled DxO Optics Pro. The error message says it "cannot open another application already has its opening.» Leave the
I'm unable to access my LR5.7 of my recent holiday catalog. I am running Windows 7 (64-bit) and recently installed and then uninstalled DxO Optics Pro. The error message says it "cannot open another application already has its opening.» Leave the other copy of Lightroom before trying to launch' the problem is, that I can see a copy of the open LR5 and cannot locate the "." lrcat.lock"the specific catalog I want to open the file. I tried to re-boot my computer, but it did not work.
Thanks Geoff. I was finally able to locate the "." lrcat.lock' of the relevant folder to the catalog I want to open. Once I deleted it, LR5 was able to access my images. Problem solved. Thank you
Tags: Photoshop Lightroom
Similar Questions
-
When I try to open LR, I get the following message, the lightroom catalog file named "lightroom catalog 5, cannot open another application already has its opening." I can find no other open programs and have tried several times to reboot and turn off without success, any thoughts where I should look?
-
Hello!
I recently upgraded from LR3 LR4 to, at the same time spend a Mac on a Windows computer.
I use LR4 successfully for the past weeks, including yesterday. But today, as I tried to open LR4, two things happened: 1) the window that contains recently opened catalogs only showed my very newest catalog, not others as is usually done, and 2) when I tried to 'open the catalog different' I got an error message. The error message said: "the Lightroom catalog named '{catalog name}' cannot open another application already has its opening.» Leave the other copy of Lightroom before trying to launch.
I have only one copy of LR, this is why it confuses me.
I thought that maybe there was a little problem somewhere, so I opened the task Mgr "End task" on Lightroom and try again. Problem was, he showed that LR did not work (it wasn't because I clicked on 'exit' when I received the error message says, who have released the program). Thought that was weird, so I restarted the computer, thinking that might help. That did not work.
I googled my problem and found a somewhat similar situation, in which the person uninstalled/reinstalled LR and everything was back to normal. I tried this as well, but it did not work.
I always get the same exact error, if I try to open the LR catalog, or go to the folder that contains the catalog and clicking on that.
Any thoughts? I am very frustrated and I have a lot of images to process this week. (I miss my Mac)
Thank you very much!
Searched some more and found my exact problem (resolved on 2 windows open from the top - http://forums.adobe.com/message/1384884#1384884 )-YAY!
-
My computer is automatically disabled, while I was with lightroom application, and when I turned back on and I wanted to continue my work, this message appeared on my screen and I can't use it.
What can I do?
Thank you
Hi lizettp,
With Lr closed go to the location where your catalog (by default it is pictures/Lightroom)
Delete the. Lock file with the same name as your catalog. For example, in the image below, it is Lightroom4 catalog.lrat.lock
In your case, it will be Lightroomcatalog.lrcat.lock
Restart Lightroom
Let us know if this helps
~ Assani
-
I tried to open Lightroom and this message keeps popping up. I restarted and shut down completely my computer and that did not work. I uninstalled Lightroom and re installed several times and that has not worked. And I went in my task manager and closed all applications and that has not worked. I don't know what else to do. Help, please.
Using Windows Explorer, go to the folder containing the catalog, it is usually inside the images folder.
Delete the file that ends with the extension .lock. Do not remove anything else, now launch Lightoom.
-
Cannot open another application already has its opening
Help, please. I always use this catalogue only. now, I get this error. I am under lightroom 5.7 64 bit. I have no other programs using these files. Thank you
Go to the directory where is the catalog and delete the file with the extension ".lock".
-
audio will not play error message says it cannot have been updated or hardware changes have not been detected. I did no hardware changes
Hello ShawnKohl,
We can also try to go back to a time where he worked with system restore.
Once this has been done, check the hat of Windows updates are available and hide the audio driver updates that are available.
System Restore:
Windows XP - http://support.microsoft.com/kb/306084
Windows Vista/7 - http://windows.microsoft.com/en-US/windows7/products/features/system-restore
Updates of masking:
http://support.Microsoft.com/kb/902992
Please note that in addition to that, the advice of the previous poster remains true: we want to get the latest audio driver on the system of the manufacturer.
Best regards
Matthew_Ha
-
I downloaded "Lightroom_5_LS11_mac_5_7.dmg" for Mac that allows to update my Lightroom 5.6 (build 974614), but when I try to open it I get the error message "Lightroom_5_LS11_mac_5_7.dmg cannot open the disk image is not recognized. I am running Yosemite OS 10.10 on a Macbook Pro (retina, 13 inches, end 2012 with 2.9 GHz Intel Core i7 processor).
Vk2mh looks that the download was not complete or corrupt. When you download the update from? Have you tried to download it again?
-
I am running windows 7 64 bit and just recently I cannot see my photos in media center. Show folders that contain pictures, but they are empty. Also, I went to the folders in my computer and tried to open some of my pictures with media center, and they will not open. This is something new because I've always been able to see my photos in Media center. Everything in Media center works great. Help
Hello
1 have you ever done any recent hardware or change the software on the computer before this problem?
2. the functions of Windows Media Center are intact?
Method 1:
First upward, to try and perform a System Restore to a State previous when the Windows Media Center worked very well.
What is system restore?
http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore
Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed. System Restore helps you restore system files from your computer to an earlier point in time.
Method 2:
Turn off the feature and reactivate it:
a. click Start, type appwiz.cpl and press ENTER.
b. in the programs and features window, click enable or disable the functionality of Windows in the left navigation pane.
c. find the Windows Media Center and uncheck the option.
d. restart the computer.
e. navigate back to the same location and activate the option back.
Method 3:
Refer to this link to learn more about,
See the photos and videos in Windows Media Center:
http://Windows.Microsoft.com/en-us/Windows7/view-pictures-and-videos-in-Windows-Media-Center
To troubleshoot issues with images and videos in Media Center show,
Working with pictures in Windows Media Center: frequently asked questions:
Method 4:
Reregister the following files.
a. close Windows Media Center.
b. click the Start menu, type cmd.
c. right-click on the cmd option in the start menu and select run as administrator.
d. type in the commands one by one by and press ENTER after each one.
Regsvr32.exe atl.dll
C:\WINDOWS\eHome\ehSched /unregServer
C:\WINDOWS\eHome\ehSched/service
C:\WINDOWS\eHome\ehRecvr /unregServer
C:\WINDOWS\eHome\ehRecvr/service
C:\WINDOWS\eHome\ehRec.exe /unregServer
C:\WINDOWS\eHome\ehRec.exe/regserver
C:\WINDOWS\eHome\ehmsas.exe /unregServer
C:\WINDOWS\eHome\ehmsas.exe/regserver
e. restart the computer.
f. restart Windows Media Player and see if the problem persists.
I hope this helps!
-
Mac user. CS4 still active (not disabled) on my macbook pro DIED. Time Machine installed CS4 on my new macbook pro. Error message, "licensing for this product has stopped working".
How can I disable my old macbook DEAD pro CS4 and activate CS4 on my new mackbook pro?
Hi Christophe,
Please visit: https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html
Contact technical support for assistance:
https://helpx.Adobe.com/in/contact.html?step=CCSN_adobe-ID-signing-in_stillNeedHelp
I hope this helps.
Concerning
Megha Rawat
-
When my printer stopped working because of error messages about "printer cannot communicate with the computer" (from "twisted into the USB pins?), I tried to change to 2nd USB port without success. I tried a new cable; that did not help.
Then I uninstalled and reinstalled my Lexmark printer and changed the error message. Now, the printer does not work because "the USB device is not recognized."
I tried to update the chips; Use 1 USB port; and using the old cable, all this without success. I checked the connections of the cable to the printer and the PC and turn on the printer and goes off; I'm out of ideas. Any other suggestions?
Hi ChristineKrause,Here are some links that might help you:
Advanced troubleshooting tips for General USB for Windows XP problems
Try the steps listed in the items mentioned above and see if that helps you solve the problem.
-
I have windows turns on, but when I try to access a browser it has a message for me that "Painting" cannot open this type of file... Even when I try to get on a web view... Even some of my icons resemble small paint pads. Really weird and I make a living on my PC so I don't know what to do. I tried to recover, and he said the same thing... When I go on FB it says I need to update my browsers and it wont let me update all the. I can't really do anything without this message coming... Now, I just got a message from windows Security Center that will not start security... It has to do with a bitmap file
Looks like you have somehow your file types of website related ('open with') the Paint program. I couldn't begin to guess how this happened, but here's how to fix this:
Use the search box to find and open the settings to "Default programs", then scroll down and click "Choose default app settings. Which opens the control panel 7-style old instead. Click on your browser in the list, and then click "Set as default" for re - include all types of possible files that the browser again.
-
Just DL ITunes and can not be opened. Error message says "Not a valid Win32 Application"
Please help me. It took HOURS to dl iTunes and now I can not open. Am error message appears and says "C:\Users\Stephanie\Downloads\iTuneSetup.exe".
is not a valid Win32 application ".
Thanks :)
Hello
Did you download and save iTunes on the desktop > then right-click > select run as administrator to install?
If you don't have anything done, see if this information helps you.
"Not to install iTunes or QuickTime for Windows"
http://support.Apple.com/kb/HT1926
«Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7»
http://support.Apple.com/kb/HT1923
If the advice already given does not, please contact Apple for assistance.
"iTunes support-how to use iTunes.
http://www.Apple.com/support/iTunes/
"Contact iTunes Support.
http://www.Apple.com/support/iTunes/contact/
Or ask in the community Apple iTunes:
https://discussions.Apple.com/community/iTunes
See you soon.
-
Original title: dll error
most of the time when I try to install a game on my pc. After I get the error message indicating that a file xxxxx.dll is missing, once again if I install this file another yyyyy.dll file is missing out of her Dungeon on entry
Hi Prakash,
I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.
To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:1. What is the error message that is accurate or complete?
2. have you made any recent hardware or exchange of software on your computer before the show?3. what game you are trying to install?Please follow the methods and mark the question below:Method 1:You need to perform a clean boot to prevent any third party conflicting application from interfering with your computer.To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135Note: You must follow the step 3 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.Method 2:I suggest you to refer to the link below to use the (SFC) System File Checker tool to troubleshoot missing or corrupted system files in Windows:How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7Method 3:Scan your computer by using the Microsoft Safety Scanner by clicking Download now to check if there is no virus infected:
http://www.microsoftsafetyscanner.com/Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.Method 4:Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.
Measures to check the application event log:
a. click Start.
(b) in the search box type eventvwr.msc , and then press enter.
c. now, click Application in the observer of events (local).
d. now, looking for event log on the right side of the event viewer window.Reference:
Open Event Viewer:http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer
What are the information contained in the logs of the event (Event Viewer)? :I hope that the information above helps you. -
DAKOSMAR41328567
You will need to do a clean install, there is no place on the way to upgrade Windows 7 32 bit to 64 bit.
Using the disk of 64-bit Windows 7, install Windows 7 Windows Easy Transfer Utility from the DVD (to find it, simply navigate to x:\support\migwiz, "x:" is the name of your hard drive. (In this case, you will see a collection of files, the important"that you must search for and double-click is 'migsetup'.) run it and create a DAMP (Windows Easy Transfer file), if you have an external hard drive, you can access it later when you perform a clean install of Windows 7 64-bit disk so you can stored there.
Once you have done this, just do a clean install of Windows 7 64 bit disc. In Windows 7 64 bit disk, start Windows Easy Transfer, follow the wizard screen, tap on which is stored the WET file (external hard drive) and it will restore your personal files and settings. Reinstall the applications needed.
http://www.notebooks.com/2009/10/07/using-Windows-easy-transfer-in-Windows-7/
I suggest that you back up your current installation before installing:
http://www.notebooks.com/2009/10/24/how-to-backup-your-installation-of-Windows-7/
In addition, review instructions how to perform a custom installation see for Windows 7:
Maybe you are looking for
-
Sort of ashamed to ask...
Column has contains date/time values, is entered in the (short) month and day (number) only. Numbers assigns the year of entry (2016) and the time 00:00:00 part This is a quote from Barry... Where can I find that "months (short) and the" day (number)
-
My back upwards only made last month on photos? How can I get my entire photo library saved? I have a lot of storage iCloud.
-
shows ok to disconnect, but will not turn on or off
iPod classic display ok to disconnect but used to turn on or off as his dead end
-
Shut down the PC after the release of the labview application.
Dear friends, I want to make application in labview so that... when somebody will start PC this labview application should run. and PC shouldn't be able to do any other task instead of running the labview application. and PC should get the stop after
-
0XC0000005 error printing "Lexmark Web gateway has encountered a problem and needs to close"
0xc0000005Recent problems with my Lexmark X 7675. After printing, I get an error message that says: Lexmark Web gateway has encountered a problem and needs to close. I think it's a problem with the latest Windows updates. I use XP SP3 and that you