I'm unable to connect because my profile could not be loaded

Similar Questions

• Unable to get the administrator account, receive the error such as the user profile service failed logon. User profile could not be loaded. "

  Original title: "the user profile service has no logon. User profile could not be loaded"and admin password will not work

  I had this problem came several times before but it always correct itself without any intervention from myself. Now, even after restarting the computer several times I can not directly connect to my main Administrator profile. I have another profile without administrative privileges already done so I could at least use my computer, but only with limited permissions. When I try to do something to solve the problem, as the registry change, I'm prompted to enter the administrator password. I enter the password and the alert box goes, and nothing happens. Enter the password seems doing nothing, except the aknowledge the password is correct (it warns me when I entered a wrong password so I know it's no doubt receiving data). DOoes anyone know how to fix this? The computer works relatively well recently and have no idea of what decoration could have happened to cause such a mistake that bothers.

  Hello

  This worked for me, try allowing the default Administrator account, the steps are in the following link
  http://somanytips.com/Windows-Vista7-the-user-profile-service-failed-the-logon-user-profile-cannot-be-loaded/
  I hope this will help!

• Windows Live Mail could not be started because msmail.dll could not be loaded. What should I do?

  Start Windows Live Mail

  Windows Live Mail could not be started because msmail.dll could not be loaded.  What should I do?

  Post Windows Live questions in the appropriate forum found here:
  http://windowslivehelp.com/

• Windows live mail could not be started because msmail.dll could not be loaded

  Hello, I received an error message "windows live mail could not be started because msmail.dll could not be loaded" what can I do for her? Please help me. Thanks to you all

  Hi keeewi,

  The question you have posted is related to Hotmail and would be better suited to the community of Windows live.

  Please visit the link below to find a community that will provide the support you want.

  http://www.windowslivehelp.com/product.aspx?ProductID=15

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• "Cannot complete order because the extension could not be loaded." with the sample CEP5

  Hello

  I have trouble with my extension porting to CEP5. I get the error message "Cannot finish order because the extension could not be loaded." when I open the Panel.

  Is it possible to get more information about what happened and why? My post was properly signed zxp and managed Extension installed without problem.

  Also, to debug the problem, I tried to open the Test HTML CEP Extension - https://github.com/Adobe-CEP/Samples/tree/master/CEP_HTML_Test_Extension_5.0

  I copied on '~/Library/Application Support/Adobe/CEP/extensions/com.adobe.CEPHTMLTEST ", created .debug inside (https://gist.github.com/m6k/39a49786b7a85a9e312b), empty the file inside Photoshop CC 2014.app .debug (to remove the verification of the signature). When I open Photoshop CC 2014, I see test listed in menu extension panels, but when I try to open them, I also get the error "cannot complete order because the extension could not be loaded.".

  
  

  No reference to what I'm doing wrong and what I can do to debug this problem?

  
  

  Jan
  

  Please read this: Adobe Extension Builder and Creative Cloud 2014

• Unable to connect network [11001] error: could not find [localhost:2423]

  Hi all
  
  Unable to connect to Essbase Excel addin.
  
  When I click on sign in in the menu essbase.
  
  I fill the details such as the server name, user name, and password.
  
  It connects and dosent show applications or database.
  
  If I give the name of the server = servername:2423 (as a port not) I receive this error network error [11001]: cannot find [localhost:2423].
  
  I edited the host file also.
  
  I have two instance essbase. We're on the default port and another on no. 2423 port.
  
  Essbase server: 9.3.1
  
  Essbase client: 6.x
  
  Help, please.
  
  Kind regards
  Mink.

  AGENTPORT

  and NODENAME need your server name.

  Published by: RobertR3 on May 8, 2009 14:46

• Unable to connect to the MKS: could not start the MKS client: unknown error 193

  Hi friends,

  The display console VMware vSphere Client, I am faced with such an error.

  I want you help me in this matter.

  I also share with you the screenshot.

  Thanks in advance.

  vSphere-4,1

  There are few reasons for this. Please try the steps below.

  #) Features in host ESX adds the host file on the machine where you have access to this.

  OR

  #) Add the DNS entries respective of the ESX host on the DNS server.

• "User profile could not be loaded" on Compaq 6710 computer b laptop Vista Business runningng

  I came home from a 2 week stay to find that I couldn't connect to my laptop. At the time I was absent the laptop was turned off. When I enter the password to logon I get: "the user profile Service service has no logon. User profile cannot be loaded. "message. I tried to turn on the laptop for 3 hours, then tried to log in again, but without success. How to do this? Really would appreciate the help. Stephen

  Hello Stephen,

  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  If Windows loads in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore.  Choose the restore point you earlier and then do the restore.  When you are finished, Windows will restart normally.

  Kind regards

  DP - K

• error message «...» Service user profile Service has not logon. User profile could not be loaded"windows will not start

  I can't get windows vista to start, because the user profile seems to be corrupted. I tried to start in safe mode to no avail mode. the system recognizes my name and graphic symbol, but does not progress beyond the error message.

  Help, please

  I can't get windows vista to start, because the user profile seems to be corrupted. I tried to start in safe mode to no avail mode. the system recognizes my name and graphic symbol, but does not progress beyond the error message.

  Help, please

  Please use this tutorial:
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

• Error - Windows Live Mail could not be started because msmail.dll could not be loaded and one or more system DLL could not be loaded esapp.dll.

  Original title:. DLL does not charge any suggestions?

  ESAPP. DLL, MSMAIL. DLL does not load

  Hi KennethJenks,

  When exactly do you get these error messages?

  You can uninstall the KODAK EASYSHARE software from Add / Remove Programs and reinstall it back. Later, check to see if the problem persists.

  Due to Windows Live Mail, I recommend you ask your question to the Windows Live Mail support for assistance.

  Hope the helps of information.
  Please post back and we do know.

• Cannot connect because windows 7 does not recognizse my profile

  Original title: Mr. Wall

  Cannot connect because windows 7 does not recognizse my profile

  Hello

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. Safe Mode ADMINISTRATOR account has no password by default (unless someone has changed the password so it should be available).

  Some programs such as the Google Updater (if you added the toolbar Google, Chrome or Google Earth) has been known to cause this problem.

  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
  http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have logged on with a temporary profile. "in Vista & Windows 7.
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with the same password (or two with the same password) to use a test or fix the other.

  You can run the Admin account hidden from the prompt by if necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  If you cannot access your old account, you can still use an Admin to migrate to another (remember to always leave an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• "Unable to connect because of an account restriction" Windows XP virtual machine as administrator

  I got virtual machine today and just downloaded some software that requires a reboot. Earlier, before the reboot, I wanted to remove my password I had set for the account, I went to the properties of the user in the control panel and changed my password for nothing. Problem is that now when I try to log in I get "Unable to connect because of an account restriction" even if I am the admin in the console. Anyone know how I can bypass this login/reset my password? I can not at all in the machine. I'm just stuck when connecting. And there is no safe mode F8 command at startup for virtual methods, I've tried. Thanks in advance.

  Okay, so I managed to fix it myself.

  For the love of everyone, go to your folder of VMS (search for it in the start menu if you can't find it), and ONLY if you have built your way out of a previous virtual disk (such as Virtual XPV HD) and always have access to this file, delete your virtual machine. This same folder. Then create a new machine with the file of virtual disk mentioned earlier, when you are prompted, and then run it. When it comes to the administrator, you will not have a password and it will record you up. Now, before closing, make sure that you change your password for an actual password to avoid that.

  If you have followed this by following the instructions, you should have more, if not all of your files back and resumed control of the console. I hope this helps. :)

  -Scalise

• Unable to connect to my profile at the start, the SCREENS ' SAYS the PROFILE SERVICE does NOT have the USER logon

  "Unable to connect to my profile when starting, SCREENS SAYS'THE PROFILE SERVICE does NOT have the USER logon"

  Profile of user could not be added

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• User profile could not be saved in

  Original title: who can help?

  can't log in to my computer... User profile could not be connected... is a virus or what?

  What should I do if it is not a virus?
  who can remove this threat by using the remote computer tech and remove it, if so push me in that direction...
  Thank you
  cannot open a session

  1. start your computer and keep pressing F8 before Windows starts access the Advanced Boot Options menu.

  2. Select Mode safe mode with command prompt
  2. type: net user administrator / Active: Yes and press the ENTER key
  3. If it has reported that it has been activated or activated successfully, and then close the command prompt by typing Exit and press the ENTER key.
  4 restart the computer and log on to the user hidden administrator account.

  Create a new user account, move the data from the old user account to the newly created user account
  http://Windows.Microsoft.com/en-us/Windows/create-user-account#create-user-account=Windows-7

• F0169 (host name ESXi) service profile could not apply the configuration

  I just created a new vNIC on 2 of my new hosts. I created the pools MAC address before you start. As I create the vNIC I got the following error:

  Your changes:

  Created VNIC FTNNIC

  Create: network fault tolerance

  Fail the Configuration of:

  Profile service (ESXi host name) org-root-[(Server:sys/chassis-2/blade-8)]

  Failure reason: connection-investment

  There are not enough global resources

  Not enough available vNIC

  Are you sure you want to apply the changes?

  I click Yes, and then get F0168 error service profile could not apply the configuration?

  What I do wrong here and how to fix it?

  Can you please more information, for example

  -What type of Blade model, input-output adapter

  -Version UCS

  -ESXi version