I'm unable to connect my router to my IBM THINKPAD XP PROFESSIONAL

Similar Questions

• How can I connect a monitor to my IBM ThinkPad

  How can I connect my IBM ThinkPad laptop to my TV?

  Hi, Joe Butch,

  How to connect IBM's ThinkPad laptop to TV

  http://www.ehow.com/how_6508798_connect-IBM-ThinkPad-laptop-television.html

  Steps for IBM's Thinkpad laptop computer connection to the TV with S-video cable

  http://swiki.fromdev.com/2008/08/steps-for-connecting-IBM-ThinkPad.html#! /2008/08/steps-for-connecting-IBM-ThinkPad.html

  There are videos on the topic as well.

  http://www.Bing.com/Videos/search?q=How+to+Connect+ThinkPad+to+Television&qpvt=How+to+Connect+ThinkPad+to+Television&Form=VDRE#.

• Unable to connect to router

  LinkSys BEFSR41 v3 4-port cable/dsl router

  Linux Ubuntu 11.04 "natty".

  Verizon dsl internet connection

  Hello

  I'm unable to open a session in the 192.168.1.1 router using the user by default/pwd of blank/admin I tried the button reset to no effect.

  Suggestions?

  Thank you

  Robert

  There is no other way but to reset it. Proceed with the 30/30/30 reset. Press and hold the reset for 30 sec operation unplug the power cable (30 seconds) and reconnect the Dungeon of cable to power for another 30 seconds. Light should be flashing when you press and hold the reset button.

• Unable to connect with router wifi - Satellite L555-110

  Hello

  I use the following configuration:

  Satellite L555-110
  Modell Nr.: PSLW8E-01E00NGR
  Windows 7 64 bit Home Premium (with all updates)

  I bought this Book 3 weeks ago.

  My laptop won't connect to my WiFi router. I use the drivers provided by Windows Update.
  I also tested the following Realtek drivers:

  RTL8191_8192_SE_WindowsDriver_2007.1.1002.2009.F00 62.P0525_ISS_1.00.0130.L

  The connection still does not work.

  I always think that there must be a driver problem, because with another book, the wireless connection works fine.
  I can't find any solution, it's the readers makes me crazy.

  Is there advice, or is this still the problem of driver windows 7?

  Thanks for your help

  nofact

  Each laptop comes with preinstalled OS. You can use 32 or 64 bit OS (recovery Toshiba original image). Recovery image contains Toshiba driver WLAN tested and functional.

  So my question is: have you noticed some WIFI problems with this original configuration of Toshiba or later after Windows update?
  Please check all of the updates before installing them and do not allow drivers to update.

• I am unable to connect to my router wirelessly to parents. I tried to reset the modem and the router and it still does not work.

  Presented labtop parents and can connect via ethernet, but still cannot connect to the wireless router. Ive rebooted both the modem and the router and ive also unplugged the power source. Help, please...

  original title: unable to connect to the wireless router?

  Hi Brandon,.

  What operating system do you use? (Windows 7, Vista, XP?)
  You receive any type of error message when you try to connect?
  What exactly happens when you try to connect?
  You receive an internet connection when you connect with an Ethernet cable?
  There are a few good troubleshooting in this thread. I suggest to look to see if it helps at all:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/unable-to-connect-to-a-wireless-network-Windows-7/734ecdef-99fb-4862-b63a-04cfa448cc06

• Unable to connect to the drop folder digital network after the installation of the new wireless router

  I have already scanned to the folder of network of digital repository on a printer HP 8500 wireless, connected to a wireless G home network. However, I recently bought a new superisolants wireless router and am no longer able to use the scan function. I now get an error message that says: unable to connect to \\Computer\Folder Make sure the remote computer is turned on. The printer on the wireless network and works very well except for scanning to the folder of the network of Direct deposit. Thank you.

  I called HP tech support last night that had me add IP address of the printer to the McAfee Firewall as an approved connection. Digital archiving to the network folder scan function works now.

• I am unable to connect to the Linksys WRT54G Router with wired connection to Office XP.

  My two laptops (XP and a Win7) will be connected to the router wireless and wired (ethernet). When it is plugged directly into the DSL modem, the Office connects and works very well. This problem started when I had to replace the DSL modem.

  I inherited this problem for my elderly mother... and it all started because they gave me the router password wrong, who now works (router has been reset) on two laptops, but when connected, the Office doesn't even show a light of connection on the router except during startup. I no longer get a window of logon passwork for the router, and I am unable to connect/ping the router in the office. (192.168.1.1)

  I would like to clarify a few things.

  1. two laptops work fine with cable connections and wireless through the WRT54G.

  2 desktop PC, which has only a wired connection, does not connect successfully.

  3. the symptoms of the failure of the desktop connection to are that the link on the router at the start light flashes during initialization of the PC but then will Dim.

  4. when the desktop PC trying to connect to the internet, it fails.

  5 when the desktop PC try to connect to the administration WRT54g page it fails.

  6. when the desktop computer try PIING the router at 192.168.1.1 IP address it fails.

  These points are correct?

  Assuming this is correct, open a command prompt and type

  IPCONFIG/ALL

  The output of the command should provide some information about the current state of the network connection.

  It would be useful that you posted this here release.

  The absence of a link light can be your main symptom and may be due to several reasons. He probably has an associate status "media disconnected" in IPCONFIG for the network connection.

  This could be caused by a bad network cable or a network connection disabled in the properties of the network on the PC. Small jets knowing the ot IPCONFIG output is would help more.

  Post this info if you can.

  Good luck

• I am unable to connect wirelessly with my new laptop. He always tells me to try to reset the router, but it does not work.

  original title: I'm unable to connect my new laptop...

  I'm unable to connect my new laptop which has a 802.11n modem to my router Linksys 2.4 GHz 802.11 g wireless. Try troubleshooting and it tells me to reset the router. Help...

  Hello

  Maybe this can help, http://www.ezlan.net/wireless.html

• EA6700 - Unable to connect to your router SmartWifi

  Hello. I managed to connect to linksyssmartwifi.com, but still get this error trying to connect to my router outside LAN.

  Linksys Smart Wi-Fi was unable to connect to your router. This can occur if the router doesn't have Internet connectivity. Try to access the router again later, and if the issue persists, troubleshoot your router's Internet connection.
  

  I know that the router is online for you (can connect Wan) and I confirmed the email account during installation.

  Any help is appreciated. Thank you!

  Oops! Turns out that I do not have remote access on when setting up. EU local network connection using the account LinksysSmartWifi.

  http://KB.Linksys.com/Linksys/UKP.aspx?pid=80&VW=1&articleid=25854

• EA6500 unable to connect to the router after Time Machine

  Just got an EA6500 - updated to the latest firmware available.

  I have attached 2 x WD NAS and 1 x WD through the USB port of the device.

  Each time after I finished running Time Machine on the MacBookPro (written to one of the WD NAS), I can no more connection to the router as neither the local IP, or the cisco connect cloud. The error message I get (loosely formulated) is: unable to connect to the router. Please ensure that the router is connected to the internet.

  At this point, all the devices connected to the router (wired and wireless) still can access Internet perfectly. Only the console of the router is therefore more accessible.

  Anyone else have the issue?

  Any ideas on how to solve it?

  Contact support for Cisco and the person advised me to do a factory reset (even if the router is new with no customization!). Regardless, it now works correctly. Cisco Cloud Connect works always before, during, and after a Time Machine.

  "When in doubt, try to turn the grid and the.

• Unable to connect to secure linksys WRT54GS2 V1 wireless router

  I just moved in with my friend and I'm unable to connect to linksys WRT54GS2 V1 wireless router.  My roommate can connect his computer laptop and desktop to the wireless router, but my iphone and the laptop cannot connect.  I tried both of my devices on a wireless network to a friend, and all both worked well.  We even changed AND removed the password and it won't let me log on to internet.  I went through the forumns and FAQS on the site, looking for suggestions.

  Thank you

  Are you MAC to your iphone and laptop addresses in the filter?

• Printer Hp6700: unable to connect to the router wireless D - Link DI-514 when SSID Broadcast is set to no.

  HP6700 printer: unable to connect to the router wireless D - Link DI-514 when the router Broadcast SSID is set to no. My MAC laptop and HP laptop both work with the set SSID on no. If I change the router Wireless SSID Broadcast is YES, then the printer HP6700 can connect to the wireless router. I set up the printer it saying that the SSID and password have been, the same as both of my laptops, but it connects ever, unless I have change the router to broadcast the SSID. Help!

  Have you tried to update the firmware on the DI-514?

  You can also try to set a static IP address on the printer, and then assign the printer to the list of DHCP static in the interface of the router.
  To give a static IP address to your printer:
  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
  -Click 'apply '.
  Now, stop the router and printer, start the router, wait, and then start printing.

  After that you remove and re - add the printer to your Mac.

  Show support by clicking on the blue Kudos star in the post that solved your problem. Doing so will help the other members of the forum their solutions also.

• Unable to connect to the router with windows 7?

  I have just bought an Acer Revo R3700 and installed Windows 7 above, but I can't connect to my router.

  My router is heaven and successfully has 4 laptops (both under Vista, two 7 running), an Xbox and a Wii and two smartphones connected to him. Yet I just can't do this system to connect to him.

  I'm at my wits end... I've tried absolutely everything. I searched the Microsoft answers site found several similar problems and tried a lot of solutions, including adding files in the registry and update drivers.

  At first I could connect to the internet every now and then, but it was biblically slow (I tried to download Google Chrome and got him to 0.2 Kbps) and soon disconnected. Now I can't connect at all.

  I just downloaded a the Ethernet controller driver and updated a driver WLAN as they apparently do not come with Windows, but it still doesn't work. Although the message has now changed to "Unable to connect" to "Limited connectivity" (even though I think it's more coincidence than anything else)

  It should not be a question of signal strength, like the Xbox and laptop computers work fine when placed next to her.

  Really needed a solution to what running an ethernet cable is not really an option :(

  Thanks in advance guys. I'll be happy to provide any additional details if you need it :-)

  EDIT: / / I would add that I seem to be able to connect fine with a phone as a hotspot? It is very very weird.

  EDIT: / / I just managed to connect, but its very slow and not changed anything for the last 100 times? Everything seems to be completely random when it let me? : S

  Hardware support comes equipment - including the drivers/software manufacturers to use such software in all operating systems.

  Looks like a possibly faulty hardware or shotty (the wireless network device.  Make and model)?

• Equium A100-027: unable to connect to D - LINK 514 router via WiFi with Vista

  I HAVE PROBLEM WITH MY TOSHIBA EQUIUM A100-027 MOBILE TO CONNECT THE ROUTER D-LINK 514. I HAVE WINDOWS VISTA ON MY LAPOP.

  I can't get the laptop to connect to my network using its internal wireless card. He's going to detect it but when I click on connect I am presented with "Windows cannot connect to the network.

  SOMEONE CAN ME SAY THE SOLUTION TO THIS PROBLEM.
  Thank you

  Hello

  I put t think it is a hardware problem and therefore, you should check your access point and the configuration of the WLan card.
  Did you use a WLan encryption, Mac address filtering?
  If so, disable encryption on the WLan router and try to connect to the network without additional security settings.

  If it will work and you can successfully connect to the WLan and then the problem was caused by incorrect security settings.

  Please check!

• Satellite L505-12 q - unable to connect to the Wlan on Draft N Router

  Hello.

  I have a Toshiba Satellite L505-12 q who that I connect to router Edimax br 6524n.

  My problem is that when I connect to the router the laptop does not use n 802.11 g... The network card is Realtek RTL 8191se... He supports the project and it is configured to receive B G and N. When I set up the router to use only the band N the portable project sees the network, but when I try to conect it can not...

  Can someone tell me where is the problem?
  I updated the firmware on the router and adapter driver and still nothing good... :|

  Thank you.

  Post edited by: Matt1990

  Hello

  First you need to update the WLan driver.
  Here is a page with all the drivers:
  http://APS2.toshiba-tro.de/WLAN/

  After that, go to Device Manager-> properties-> Advanced tab WLan card and check if the Draft N has been selected.

  Restart the device and then try again