I'm unable to install the drivers for my Dell XPS printer

Similar Questions

• I'm unable to install the drivers for the Intel CS630 PC camera for windows7 64-bit?

  I'm unable to install the drivers for the Intel CS630 PC camera for windows7 64-bit?

  If it's a camera for INTEL it website should have the good

  64-bit to Win 7 64 bit software.

  Some older hardware will not work on newer 64-bit systems.

  check your websites of manufacturers of games for win7 64 bit compatibility.

  Try your game in compatibility mode in Windows 7.

  to say the least there are a huge amount of games and

  software that works fine with Win7 64-bit.

• C8180 is unable to install the drivers for Windows 7

  My all in one photosmart C8180 printer I can't install the drivers

  Have you tried to download recommended drivers full HP here?  Are there any error messages?  Running the diagnostics to http://www.hp.com/go/tools can help solve the problem.

• Unable to install audio drivers for Satellite 3005-S303

  Unable to install audio drivers for Satellite 3005 - S303, Windows XP SP2 installation of the Realtek AC97 drivers automatically, but with the error (blue screen). I tried to install the drivers of Crystal or Cirrus but Windows always changed for Realtek.

  Hello

  I found information on the net that this device supports a Crystal CS4299-A Codec chip.
  In this case, it should be possible to use the Crystal audio driver.
  As far as I know that he is an American unit. I searched the site of driver Toshiba us and have found a Crystal audio driver but only for Windows 98SE/Me/2000.
  If you have found the right driver, so I recommend you to remove first the driver of his former (Device Manager), then install the new.

  Here you can compare as you installed the BIOS with BIOS which is available on the site we Tosh.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_home.jsp

• HP 15r-250tu: cannot install the drivers for the new laptop

  Hi expert, I bought a new laptop from hp 15r-250tu. I installed windows 7 ultimate (64-bit) service Pack 1. Cannot install the drivers for my laptop.i IAM downloaded all the drivers available on the site of hp for this model laptop.i tried to install them in the order as the mentioned error messages, but get that my phone does not support these drivers. Please answer me with links of driver and sequence to install. Thank you.

  Hello:

  Use the W7 x 64 drivers for the HP 250 G2 on your model except file BIOS, firmware, wireless and bluetooth.

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5449369&swLangOid=8&swEnvOid=4059

  Wireless:

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943827&swItemId=ob_149229_1&swEnvOid=4058

  Bluetooth:

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_149791_1

• How do we install the drivers for my HP 8620 on iMac running Didier?

  I use Windows XP on my iMac running Didier and just took all the drivers for my old HP 7520.  I've updated to HP Officejet Pro 8620 and cannot install the drivers for the new printer.  Any suggestions?

  Thanks for the clarification of Jim,

  You can download the Windows XP driver from the link below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-124140-4&cc=us&DLC=en&LC=en&OS=228&product=5367614&sw_lang=

  Shlomi

• Dell laptop, cannot install the drivers for USB drives.

  Although the fans more of my family and the power of Google, I can not solve this problem is to have my sister.

  Each USB key she inserts into his laptop computer are, although recognized, never installed.  For example, when I install in another computer USB flash drive, the typical action should be that either the system operating rises automatically the drive to a letter on my computer, or invite an Assistant saying that it will try to install the drivers for the flash player and do it automatically.

  When I insert a flash drive into this laptop, however, it will prompt me to find the location of the folder where the drivers for the USB key is installed.  When I ask for an alternative, he will try to find it through Windows Update for drivers, then answer he found nothing.

  I tried to assign the same flash as a generic device drive in Device Manager, but nothing helps: the flash player still will not mount in my computer properly.  Windows Update, moreover, indicates that the system is up-to-date.

  Any ideas on how to fix this, so that the laptop in the world will recognize volumetric flash drives and devices entry without asking for the location of the driver?  That is, a system of 'plug & play' with all USB devices?

  "Windows Update, moreover, indicates that the system is up to date."

  You get the manufacturer's operating system hardware drivers: Dell.

  http://support.Dell.com/support/downloads/index.aspx

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  See you soon.
  Mick Murphy - Microsoft partner

• Problems to install the driver for Canon lasershot 2900B printer, to get the message "installing the driver interrupted."

  I have problems to install the driver for Canon lasershot 2900 B printer. I have windows 7 64-bit (SP1) installed in my PC. I get the message "driver installation interrupted. I had downloaded and installed the latest driver and I get the same result. I was told it might be a problem with OS. I have had no problems to install the drivers for the scanner or hardware drivers. Thanks in advance.

  Original title: printer drivers

  Thanks for the reply of Ravi Shankar. My PC is a Dell Inspiron 530. There is no specific error message except for the one I provided. There is a solution to this problem. It seems that if the print spooler is disabled (services and storage via the computer management), the installation of printer driver is interrupted. I manually activated the spooler on automatic printing and the printer driver has been installed immediately.

• Cannot install the drivers for the DVD drive on the Satellite X 200

  Hello
  Can anyone, please, help me? I could not install the driver for the dvd drive. I have vista ultimate 32 bit now, do a clean installation of which was preinstalled in my X 200 series new lappy.

  Almost all of the drivers had been installed successfully, but for dvd player she always ends up saying "this application cannot be installed on this computer. The installer is now abandoned. »

  Can someone please help me, what could be the reason? And also if someone could provide a list of the software that was pre-installed in the lappy would be appreciated. Thank you

  Concerning
  Suraj

  Hi guys

  I recommend you research a little in this forum rather than wait
  The solutions have been posted already here:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=28963

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=28538

  Best regards

• HP Support Assistant is unable to install the drivers wireless wireless device not recognized at startup

  Name and product number:

  HP Envy Sleekbook4 PC / / C2K72UA #ABA

  Intel Centrinto Wireless-N 2230

  Microsoft Kernel Debug network adapter

  Realtek PCIe GBE Family Controller

  USB - IF xHCI USB Host controller (Intel WiUSB)

  Inter 7 series / C216 Chipset Family USB Enhanced Host Controller - 1E26 (there is a similar device that works but ends with 1E2D)

  System Operalting:

  Latest Windows 8

  No error message.

  Changes:

  Uninstalled some things via the control panel (I don't know where I can find a newspaper which has been uninstalled)

  Attempt to system restore and it failed.

  My diagnosis:

  First of all, some info on why the devices do not work.

  The USB controller claims there are insufficient system resources to complete the API. However, I am only using about 20% of my memory and my hard drive. If I deactivate and reactivate the device through Device Manager it starts working until the computer passes in mode 'sleep' or reboots.

  The Realtek PCIe controller and Intel Centrino Wireless adapter simply read {operation failed}. If I disable and re-enable these devices via Device Manager they begin to work until the computer mode "sleep" or reboots.

  The Microsoft Kernel Debug network adapter "is not present, is not working properly or is not all its drivers installed."

  Intel WiUSB - windows cannot load the drivers for this device (code 31).

  The HP support assistant tries to download and install "Wireless for windows drivers 8. The download succeeds, but the installation fails.

  At startup, windows thinks that there are no network adapters (other than bluetooth). After the reboot of the devices from the Device Manager, they appear in the section of the network adapters.

  Thank you in advance for reading this and any help you may be able to offer,

  Tim

  I see. Unfortunately, the failure of the short DST means that the hard drive needs to be replaced. The computer is still under warranty?

  If so, you can contact HP Technical Support and ask them to send you a replacement. This replacement will come with recovery media. If you don't have an external CD drive, make sure you request a recovery rather than recovery disks USB. They should know that the model already, but, I would make sure. Once you have received the new hard disk, you will need to send the back of an old man in this same area, using the provided shipping label. The technician on the phone will give you the details on that.

  HP 1-800-474-6836 Technical Support

  If the computer is out of warranty, you can replace it with any HDD notebook 2.5 ". If you need help choosing a car, let me know

• ScanJet G4050: Desktop unable to see the drivers for Scanjet G4050

  I have a ScanJet G4050 that I can't make it work with my desktop computer (HP ENVY 700 - 210xt CTO desktop PC). The Office seems to think that there are no drivers for the device.

  I've recently updated for Windows 10 of 8.1. I had not connected the scanner before update (yes I know) so I honestly do not know if she would have connected before.

  I ran software installation from the disc, and then downloaded and installed software linked from the info Windows 10 on HP website.  Nada.

  My Device Manager Office lists the HP scanner which I assume is due to the installation of the software detects not the scanner because I told

  The drivers for this device are not installed. (Code 28)

  There is no compatible driver for this device.

  Watching the news on the events tab for the device, it is said

  USB\VID_03F0 & PID_4605\CN48JCB18105 device has been migrated.
  
  Device's last Instance Id: USB\VID_03F0 & PID_4605\CN48JCB18105
  The class GUID: {6BDD1FC6-810F-11D0-BEC7-08002BE2092F}
  Path:
  Migration status: 0x0
  Present: false

  I guess ' present: false "means that the device is not seen by Device Manager.

  Just in an act of desperation, I switched the USB cable in case it was bad, nada.

  OK, I'm completely and totally frustrated... and ideas.  If someone can point me in the right direction I would really appreciate it.  Pay $99 for technical support of time on a $180 scanner is not really profitable.

  @ErinContour

  OK, well - the information on the pages of the Web site support has been around since at least 2006 - so if the scanner is not believed, it seems at least some support information has been around for some time.

  I don't have the answer...

  ErinContour wrote:
  

  This scanner is aged a year... so little vintage. I mentioned, I installed the scanner, I installed the complete software off the drive before you download and update the software using the Windows 10 link on the HP site. I have the guide to the user, which in the circumstances is singularly useless.

  Still not clear. I guess I misunderstood - do not remove the existing printer software before installing the replacement defined on HP website.  Assuming you have done this, then 'all good '.

  Maybe it's nothing other than Windows 10 no no not necessary routines in place to support the scanner software.

  User guides vary - most recently, I think the documentation has improved substantually.  Unfortunately, in my opinion, a lot of the old guides (this one circa 2006) are not as including the type of information desired by many users / owners of the devices.  NOTE: This is a personal opinion only; I speak NOT of HP.

  There is a tool that you can try:

  HP Print and Scan Doctor for Windows

  No idea if the doctor will know what is happening.  Although imperfect, it is a good program...

  ----------------------------------------------------------------------

  If the scanner is connected physically and that the computer is aware of this connection and know the type of material, then you might be able to use a software program of scanning solution.

  Options of the digitization program

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• How to install the drivers for the hp deskjet F4500 wireless printer?

  Troubleshooting says I need to install a driver, my printer is offline and I am unable to do it online.

  He showed this: Hp color laserjetCp2025dn no driver and hp deskjet F4500 no pilot, said to install the drivers, but I don't know how to do this, any help is appreciated, thanks!

  Hello

  Check with HP, their drivers support and documentation online and ask in the Forums of HP.
  HP has excellent information on pilot facilities.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Code28 do not installed the drivers for multimedia audio controller

  No audio device, no sound on laptop, modem pci, no driver not installed code 28 on windows xp home edition

  Hi Swifty,

  Welcome to the Microsoft Community and thanks for posting the question.

  It would be awesome if you could answers to these questions in order to help you further.

  1. have you made changes on the computer before this problem?

  2. What is the brand and model of the computer?

  To resolve this problem, you must install the latest version of the drivers for the device.

  You can check the manufacturer's website and download and install the latest version of the drivers available for the device.

  You can see the following article for more information about the error Code 28:

  Explanation of error codes generated by Device Manager in Windows XP Professional: http://support.microsoft.com/kb/310123

  We would be more than happy to help you if the steps above did not solve the problem.

• Unable to install the driver for the network printer, the reason according to HP's Service: MSIServer

  Original title: Error code: OX8004FF01

  While trying to download microsoft security essentials on a computer running Windows XP Professional with service pak 3

  I received a cannot install security essentials (OX8004FF01 error code)

  I removed all Norton parts from this computer and the firewall is turned on.

  So, what is this code and how to fix the problem?

  I am not able to install the driver for my network printer, is the reason according to HP

  Service: MSIServer

  Microsoft manufacturing

  Version: 0.0.0.0.

  The name of the HP printer file is: 100_228_PS_A10_02_Full_Net_enu_NB.exe

  Any help with these problems would be appricated: * address email is removed from the privacy *

  Hello

  What is the model number of the printer?

  Help with Microsoft Security Essentials issues, contact the Microsoft Security Essentials team. You can use this link to contact them.

  http://answers.Microsoft.com/en-us/protect

  For the printer problem, check these links and see if they help.

  Method 1: Refer to this link.

  Error "Windows Installer service could not be accessed" occurs when you try to add or remove a program in Windows XP or Windows Server 2003.

  http://support.Microsoft.com/kb/315346

  Registry warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see this link:http://support.microsoft.com/kb/322756

  Method 2: Install fixit from the following link and try to install the drivers.

  How to fix MSI software update registration corruption issues

  http://support.Microsoft.com/kb/971187

  Also visit these links:

  How to manage devices in Windows XP: http://support.Microsoft.com/kb/283658

  How to install a printer driver locally for a remote printer in Windows XP: http://support.Microsoft.com/kb/282842

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• windows XP F6 installation does not work - cannot install the drivers for the controller

  I want to install Windows XP, I press F6 toload the AHCI AMD drivers from a floppy disk, but the installation stops when loading. How F6 to stop and allow the loading of the drivers?

  You should be able to install the AHCI drivers and change the interface after Windows is installed.

  If you have not already installed Windows, leave the setting as native IDE and install it normally.

  If Windows is already installed or after you're done install, install appropriate drivers for your controller and then change the interface of AHCI.
  You may need the chipset drivers installed as well.