I'm unable to install the drivers for the Intel CS630 PC camera for windows7 64-bit?

I'm unable to install the drivers for the Intel CS630 PC camera for windows7 64-bit?

If it's a camera for INTEL it website should have the good

64-bit to Win 7 64 bit software.

Some older hardware will not work on newer 64-bit systems.

check your websites of manufacturers of games for win7 64 bit compatibility.

Try your game in compatibility mode in Windows 7.

to say the least there are a huge amount of games and

software that works fine with Win7 64-bit.

Tags: Windows

Similar Questions

  • Unable to install audio drivers for Satellite 3005-S303

    Unable to install audio drivers for Satellite 3005 - S303, Windows XP SP2 installation of the Realtek AC97 drivers automatically, but with the error (blue screen). I tried to install the drivers of Crystal or Cirrus but Windows always changed for Realtek.

    Hello

    I found information on the net that this device supports a Crystal CS4299-A Codec chip.
    In this case, it should be possible to use the Crystal audio driver.
    As far as I know that he is an American unit. I searched the site of driver Toshiba us and have found a Crystal audio driver but only for Windows 98SE/Me/2000.
    If you have found the right driver, so I recommend you to remove first the driver of his former (Device Manager), then install the new.

    Here you can compare as you installed the BIOS with BIOS which is available on the site we Tosh.
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_home.jsp

  • Want to m6-1203ex: HP Envy m6-1203ex laptop drivers for windows7 (32 bit)

    I downgraee my computer hp Envy m6-1203ex Win8 for Windows7 (32 bit) laptop, I have already successfully installed Win7 (32 Bit), I need hardware drivers for windows7 (32 bit), I checked on google, but does not do so. Please inform accordingly.

    Hello:

    There is no W7 32 bit graphics drivers switchable configuration from anywhere.

    Your only choice if you want to properly run W7, is to install W7 x 64, and then you can use the drivers and software of the m6t-1000 except the BIOS and firmware files.

    http://support.HP.com/us-en/product/HP-Pavilion-M6-1000-entertainment-notebook-PC-series/5259226/model/5275636/drivers

  • HP ENVY 17 J070EZ > > > I need drivers for Windows7 (64-bit)

    Hello world!

    I need Windows7 (64 bit) drivers of my HP ENVY 17 J070ez. Anyone have idea? Or can I use drivers Windows8?

    THX!

    I've consolidated most of the drivers for Windows 7 64 bit which can be downloaded from the following link:

    FTP://Win7:9RO * [email protected]/Notebook/Elmo%201.0.zip

    It is a huge file of about 1.6 GB and has all the necessary drivers.

    If you still need the missing drivers, follow these steps:
    1. in the run box, type devmgmt.msc.
    2 unknown devices would be listed as such and plotted with a yellow question mark.
    3. Select the unknown device or any other device you need of drivers and right-click to access the properties.
    4. in the Properties window, click the Details tab and select Device Instance of Id or hardware ID from the drop-down.
    5. an alphanumeric string, like this DEV_7130 & PCI\VEN_1217 & SUBSYS_012F1025 & REV_01\4 & 6B16D5B & 0 & 33F0 is the marker for the identification of the unit.
    6. Please provide this number so we can offer you the appropriate driver.

  • PC Companion is unable to install the MTS (Win7Pro) drivers

    I tried to install PC Companion on my laptop Windows 7 Pro, but the phase of installing driver MTS fails with an error message. That's what I did:

    1 download the latest version of PC Companion of http://www-support-downloads.sonymobile.com/Software%20Downloads/PC%20Companion/Sony%20PC%20Companio...

    2A ran the installer and the accepted request elevated privileges

    3. we see the PC Companion start screen, then a language selection window. I accept auto-select English (United Kingdom) by selecting Install at the bottom right.

    4. I accept the license agreement

    5. I am informed that the MTS support is not installed on my computer, which is needed to go through my phone using Windows Explorer. By selecting "Move" the installer will download and install MTS drivers for me. So I set Proceed.

    6. 12 mb are downloaded, then an error dialog box pops up saying:

    «Windows package manager: operation failed with 0x8007047F.» The specific program is not a Windows or MS-DOS program. ", so I am forced to select OK."

    7. This returns me to the installer of PC Companion which then said "MTP supports installation successfully, click next to continue", so I click Next (clearly there a problem because the support of PSG has no installation).

    8 PC Companion is installed and launched.

    9. I skip the Intro, and a message appears telling me I need to update before I can use PC Companion, so I select update now and 19.8 MB are downloaded.

    10. I see a new installer starts, and I'm back to step 5 saying that MTS supportis installed do not. I allow him to try and install using 'proceed '.

    11. 12 mb are downlaoded once again, and I finally see the same exact error as step 6. I click OK again to close the error dialog box.

    12 PC Companion Installer still consider installing MTS was a success, then I click Next (the only real option) and it installs and launches PC Companion.

    13. I make sure my connection mode USB Z1 Xeria is on the PSG and connect it to my laptop using cable USB of Sony.

    14 nothing happens in PC COmpanion, he says always "no phone/Tablet not connected" in the upper part.

    15. in the Windows Device Manager, I see a new device in the other devices section that says "C6903". It's my phone, but it has not been correctly identified, and no drivers were installed.

    16. If I'm trying to impose the installation of the driver by double-clicking the C6903 and select Update driver software, Windows performs a search, but eventually returns with ' Windows cannot find software driver for you device.

    My Z1 does not connect to my laptop. I tried many USB ports. When it is connected to the DELL laptop the same of my colleague, it works fine for him. When it is connected to another laptop of colleagues (not identical, WIn8.1) it works fine also.

    I was on the site of Microsoft MTP driver and downloaded and installed the drivers from the PSG. They apparently installed fine, but this made no difference to my phone identity in Device Manager.

    The properties of C6903 show 'unmanned '.

    So. I'm stuck. Can someone help me understand why it not install drivers for MTP PC Companion, and why my Z1 (which seems to be on other phones) cannot be recognized on my laptop? I'm sure it must be a driver on my laptop problem.

    Specs: Windows 7 Pro (fully updated) SP1, 64-bit, 16 GB of RAM. Laptop DELL XPS.

    Thanks in advance for any help!

    Richard

    A little more research, I discovered that someone else had bad until they installed Windows Media Center. My version of Windows 7 (N) does not include Windows Media Player or Center, so I installed Windows Update KB968211 which includes Windows Media Player. Rebooted, plugged my Z1 and voila! It works perfectly now!

    I'm a little annoyed that I have to install Windows Media Player to use my Sony Xperia phone. And I'm a still more angry that PC Companion could not install the drivers for MTS and do not recognize the problem. I was pulling my hair out with this!

    I hope that everything will be good from hereonin.

    And I hope that this message will help someone else out there!

  • I'm unable to install the Microsoft. NET Framework 4 client for windows 7 X 64 profile base system. Any ideas?

    Original title: Microsoft. NET Framework 4 client for windows 7 X 64 profile base system

    I'm unable to install the Microsoft. NET Framework 4 client for windows 7 X 64 profile base system.

    Any ideas?

    Thank you.

    Hello

    Thanks for posting your query on the Microsoft Community.

    I understand that you have a problem with the installation of Microsoft. NET Framework 4 client profile. I will certainly help you in this matter.

    Provide us the following information to better help you.

    • Have you made changes on the computer before this problem?

    • You receive an error message/code?

    Follow the below methods:

    Method 1:

    The .NET Framework 4 Client Profile is available on Windows Update
    http://support.Microsoft.com/kb/982670

    Follow the method 1 and method 2 in the article and check for the issue. If the problem remains same follow method 2.

    Method 2:

    Disable the .net framework Windows feature on or off, follow these steps:

    a. click the Start button, select Control Panel, click programsand then click Windows turn on or off features. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    b. to turn off .net framework, click the media feature. And the .net framework and click OK.

    c. restart the computer to apply the changes.

    Note: follow the steps above to activate or activate the .net framework and check if the problem occurs.

    For more information, refer to this link turn Windows features turn on or off:

    http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

    Please let us know if you need more assistance.

    Thank you.

  • "Unable to install the plugin from RoboHelp for FrameMaker...." »

    Hi-

    I have 9 Frame and a copy of RoboHelp 8.0.0.203 demonstration and works in Windows 7 (all of a sudden. Yet to learn my way in the operating system after a catastrophic failure of the weekend with my trusty little machine XP.) I have no TCS2; just these two stand-alone tools. I have a book of frame I need to turn into contextual HLO and am auditioning Robo for the task.

    No dice. Whenever I try to import (see below re linking) I get an error message in a box marked "RHUtils": "unable to install the plugin from RoboHelp for FrameMaker. If please close FrameMaker and try again. »


    With your permission, I'll cover a few points in the order in which they come to mind:

    == > Initially I tried linking, hoping of course to the advantages of the single-sourcing. I learned in this forum and elsewhere (-btw, thanks for this great resource) I need the TCS2 in good faith in place to connect. Thought that I could import for now instead of it, just to see how it happened; received the same error message.

    == > It was AFTER I had done the research and on the Adobe site (http://www.adobe.com/support/robohelp/misc.html) found this: "the plug-in for RoboHelp, FrameMaker FrameMaker users allows quickly convert any number of books for a simple import or FrameMaker files in RoboHelp 2002 and X 3.» RoboHelp X 4 includes the plug-in! For RoboHelp, FrameMaker plug-in is only available for Windows. To install the plug-in, unzip the RoboMIF.dll into the Plugins folder in the installation of FrameMaker folder (normally found in C:\Program Files\Adobe\FrameMaker7.0\fminit\Plugins)...   Once the plug-in has been installed, restart FrameMaker. FrameMaker now includes a RoboHelp menu. "OK: I have downloaded RoboMIF.dll, installed according to the instructions, rebooted just in case, and now"Adobe RoboHelp"actually appears in the menu bar in the frame. I however always the error message whenever I try to import (now).


    == > For several of these attempts Frame was indeed closed. For several other Frame opened to the entry page and nothing else. No apparent effect, anyway.


    == > Import and link Word files seems to work very well - which is cool, but my document is in frame at the moment. I know I can convert, but up to now to convert the word seems to need to get all references, what I did in the framework. Doable but not my first choice.


    == > I found a thread of editors at http://www.mail-archive.com/[email protected]/msg18576.html / / www.mail-archive.com/[email protected] msg18576.html relating to this problem. The recommendation, (published here for brevity), who was the author:

    1. locate [the] Maker.ini file and ideally make a backup of it, just in case.
    2. in the [APIClients] section of the maker.ini file, add the following line:

    RH4FMver9 = Standard, RH4FMver9, C:\Program Files\Adobe\Adobe Technical Communication Suite 2\Adobe RoboHelp 8\RoboHTML\RHFrameMakerServer9.dll,all

    3. you should now be able to launch RoboHelp and 'link' files, FrameMaker, FrameMaker application should launch correctly.

    This doesn't seem to be my answer because I don't yet own TCS2. This path does not exist.

    (I still get excellent advice of training provided by this answering machine, RJ Raquez, to http://blogs.adobe.com/rjacquez/2009/05/linking_framemaker_9_books_in.html.)

    In any case, this is where I realized that I was, at least for now, of ideas. Does anyone have more?

    Thank you-

    Anne

    If you do not want to go down the road of miftogo mentions Arnis, you can always download the demo of TCS2 - it is fully functional for the period of the demo. I am tempted to install it in its own virtual machine (or another machine entirely) so that you do not get the demo interfere with your legitimate copy of FM9.

  • Unable to install audio drivers, MS uaa hd audio needs

    Unable to install audio drivers, MS uaa hd audio needs... I have dl'ed several different versions of the uaa, but none of them allows the continuation of the audio driver installation

    Hello Mr NoseDevoidoffunk,

    Follow the steps in the article.

    Class of Universal Audio Architecture (UAA) High Definition Audio driver available for Windows Server 2003, Windows XP, and Windows 2000

    http://support.Microsoft.com/kb/835221

    Universal Audio Architecture (UAA) High Definition Audio class driver version 1. 0a available for Windows XP, Windows Server 2003, and Windows 2000

    http://support.Microsoft.com/kb/888111

  • HP Officejet 4630 is unable to install the driver. Windows XP Sp3

    Good evening

    I bought this printer earlier today and a few hours already on this issue. The box is not too far away, and the printer could come back soon!

    The printer works fine, it was connected to my router, the light is always on, it says connected to the wifi system. Print the confirmation of wifi connection page, everything is 'Success'

    My problem is that whenever I try to install the drivers, the research of setting up a printer that is connected but not yet installed. He notice my printer with the right ip address, then copy the driver of a couple files and then tells me it is unable to install the printer.

    The current configuration is OJ4630_198, I found an older version and tried it but roughly the same results, except that before it stops the installation telling me he fails to do so, it asks me to locate the HP CD on my cd player, looking for a fax facility facility .png but fails a second later.

    I am naïve enough, I tried to install it manually, but of course the Communication Port is a little tricky with a wire less printer.  I noticed there's a selection of "Create a new port" available in which appears an option named "Hp discovered Port Monitor (HP 4630 series)" which curiously is my new printer. Tried but it doesn't work.

    I reset my router and printer, pc several times, tried to assign my printer to another port number, all ended with the same results. It connects to my wifi, but I can't seem to install the printer driver.  So my list of printers is empty atm...

    Thanks for any help,

    Very appreciated

    Windows XP Sp3

    Cisco router

    ZoneAlarm firewall...

    Well, problem solved.

    It is indeed a Windows problem.

    Thanks to SAM from live chat assistance, he noticed the HP Installer wasn't working, so we tried to manually install the printer with the tcp/ip Protocol and former driver windows Xp Announces (deskjet 990c) who worked...

    I hope that everything is still functional. But Kudos to SAM for a helping hand.

  • could not find the drivers for window7 32 bit 15-d018TU hp

    Dear Sir, I recently bought 15-d018TU with window 8.

    I installed 32 bit Windows 7.

    but I could not find the drivers for window7 32 bit.

    I need drivers now

    1 network cards

    Bluetooth 2 controller

    3 network controller

    4 PCI simple communication controller

    5 SM bus controller

    USB 6 bus controllers

    7 Ethernet controller

    Hello:

    You should be able to use all the W7 32-bit drivers and software from the HP Probook 450 G0 on your model, except the audio.

    Your model uses the Intel HD graphics driver.

    DO NOT USE ANY BIOS OR THE FIRMWARE OF THIS MODEL FILES

    http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=5359407&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswEnvOID%253D4052%257CswLang%253D%257Caction%253DlistDriver&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

    Audio: Accept the agreement.  Download and install the driver first on the list.

    http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=24&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  • Bing bar 7.00 is unable to install the update error 643

    Bing bar 7.00 is unable to install the update error 643

    How to ask a question
    http://support.Microsoft.com/kb/555375 >

    It helps those answering questions if you provide:

    what the version of windows (32-bit or 64-bit) and service pack level.

    you use what browser (exact version).

    what application anti-virus or security suite is installed and your current subscription?

    What third-party firewall

    What software anti-malware can be installed.

    What updates you trying to install? (Number of KB)

    Please do it in your next reply.

    `````````

    DON'T APPLY TO WIN7

    A KB has been created for the x 0 80070643 or error code 0 643 x that appears when you use Microsoft Update or Windows Update Web sites to install updates. The KB includes an automated Microsoft Fix it 50473 that corrects the problem. Look at the following KB: http://support.microsoft.com/kb/958052>>

    Suggest you download and save the fix it.

    Then close all open programs and browsers before running MS fix 50473.msi.

    `~`

    03/18 / 1105:46: 22:00

  • Virus & spyware definitions update failed. error code: 0x8024402c. Error description: Microsoft Security Essentials was unable to install the updates of definition, because the proxy server or target server names is not resolved.

    Virus & spyware definitions update failed.

    error code: 0x8024402c.

    Error description: Microsoft Security Essentials was unable to install the updates of definition, because the proxy server or target server names is not resolved.

    Here is an article that meets your specific error message regarding updates:http://support.microsoft.com/kb/900936.  I am surprised that the error occurs with all the updates, but there may be a difference between them that causes the problem for definitions, but not for others.  I hope that this will solve the problem.

    If this does not help, please transfer your question in Forum Windows Update:http://social.answers.microsoft.com/Forums/en-US/vistawu/threads where updates experts will be happy to help you.  Please post with the information requested here:what to post in the Windows Update forum

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Of VMware Remote Console Plug-in Setup error: "unable to install the hcmon driver."

    Hi all

    I try to install the VMware Remote Console Plug-in for my browser of 32-bit Internet Explorer 11, and I get an error message during installation: "Unable to install the driver of hcmon."

    I have Windows 7 64 bit with .NET installed 4.5.5. Anything installed in my device manager, there is no hcmon.

    I use an x 86 install files to VRMC (VMware-vmrc-win32 - x 86 .exe), but I guess that this 32-bit version is what I want because I use THE 32-bit? Or is that what I want 64-bit for my OS?

    I've seen some posts related to this issue, but all my registry keys seem to be set correctly and my .NET is of course more recent than the version 3.5 SP1, but I hope it's OK.

    Also, I got an error on the USB in my Windows logs Arbitration Service, but following the steps described here, and retry the installation also failed with the same error 'hcmon' described above:

    http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2043656

    Any ideas on what might occur, or other things I can try?

    Check if these KBs contributes to:

    http://KB.VMware.com/kb/2053281

    http://KB.VMware.com/kb/2006486

  • I'm unable to install the Prime Minister the elements of the trial.

    I'm unable to install the download to test components of Prime Minister.  I have a Mac.  He continues to tell me that "Setup has encountered a problem that caused the installation to fail.  Contact the manufacturer of software for support.  I followed all the advice on the troubleshooting page, but have the same results.  Any suggestions?

    OK, then I suggest that you contact our support staff at the following link: https://helpx.adobe.com/contact.html

    (be sure to connect to adobe.com with your Adobe ID first)

    Kind regards

    Guinot

  • Unable to install the update to windows? 0x800A01AE & 0 x 080070570

    Unable to install the update to windows? cordially 0x800A01AE & 0 x 080070570, Sohail Patel "MCSE 2003 | ITILv3 | "A journey of a thousand miles begins with a first step."

    http://support.Microsoft.com/kb/910359

    Manual procedure to solve the "0x800A01AE" or "0 x 080070570" error messages to manually resolve this problem, follow these steps:

    1. Stop the Background Intelligent Transfer Service and the automatic updates service. To do this, follow these steps:

      1. Click Start, click run, type cmd, and then click OK.
      2. At the command prompt, type the following commands and press ENTER after each command:
        net stop wuauserv
        net stop bits
        output
    2. Rename the Catroot2 folder.

      Note Do not follow this step if you are using Microsoft Windows 2000.

      To rename the Catroot2 folder, follow these steps:

      1. Click Start, click run, type cmd, and then click OK.
      2. At the command prompt, type the following commands and press ENTER after each command:

        net stop cryptsvc
        Ren %systemroot%\System32\Catroot2 oldcatroot2
        net start cryptsvc
        output

      Important Do not rename the folder C:\windows\system32\catroot. The Catroot2 folder is automatically recreated by Windows, but the C:\windows\system32\catroot folder is not recreated if is renamed the folder C:\windows\system32\catroot.

    3. Rename the folder "C:\Windows\SoftwareDistribution":
      1. Click Start, click run, type %any, and then click OK.
      2. Right-click the C:\Windows\SoftwareDistribution folder, and then click Rename.
      3. Type SoftwareDistribution.old, and then press ENTER to rename this folder.
    4. Save the files used by Windows Update and Microsoft Update. To do this, follow these steps:
      1. Click Start, click run, type cmd, and then click OK.
      2. At the command prompt, type the following commands, press ENTER after each command, and then click OK every time that you receive a verification message:
        regsvr32 c:\windows\system32\wuapi.dll
        regsvr32 wuaueng1.dll
        regsvr32 c:\windows\system32\wuaueng.dll
        regsvr32 c:\windows\system32\dllcache\wucltui.dll
        regsvr32 wups2.dll
        regsvr32 c:\windows\system32\wups.dll
        regsvr32 wuweb.dll
    5. Start the service of automatic updates, Background Intelligent Transfer and the event log service. To do this, follow these steps:
      1. Click Start, click run, type cmd, and then click OK.
      2. At the command prompt, type the following commands and press ENTER after each command:
        net start bits
        net start wuauserv
        net start Eventlog
        output

        Solved...!

    Best regards, Sohail Patel "MCSE 2003 | ITILv3 | "A journey of a thousand miles begins with a first step."

Maybe you are looking for