I'm unable to start windows xp.

I get in the options to start windows normally or SafeMode etc, but cannot change the options "start normally.  I have for the suspense account reduced, tries to start, then resets.  Keyboard works if I use F8 or siilar, but the arrow keys do not work. Tried xp install from CD, but even once, the keyboard does not allow me to do anything, when it says press the key to continue... nothing happens.

Fri @ 03:30 dropped to oem repair center
Mar @ 05:00

@ I was exspecting a hard drive dead

They replaced;

CENTRAL PROCESSING UNIT
Keyboaed
and more important 2 tons of FUR!

I can't be mad BSOD when I used a laptop
as an air purifier

The photo on this account REF
I BLAME

Operating system reinstalled to the repair center

66 mat installed updates 4-times (work)
Reinstalled and updated office

I rely on forums like this to help

Thanks for being here

should change my profile picture and asked him

Tags: Windows

Similar Questions

  • Error: "unable to start Windows XP" after recent updates

    Original title: Windows XP blocked

    Hello, I have 2 computers with Windows XP with SP2 and automatic updates. After the updates (17 June), two computers refuse to start. I get the message "Unable to start Windows XP" with different options to choose from, Mode without failure, last Configuration and boot Windows, but none of them works, he keeps just show this message even after trying in vain to restart. What can I do? Desperate enough now. Thank you.

    Hi GatoJ,
     

    Disable the automatic restart in the event of system failure of the Windows startup option to know the error originally this problem.

    Disable the automatic restart in the event of system failure

    This option prevents Windows from automatically restarting if an error of Windows to fail.

    See this link to start in safe mode startup option:

    A description of the options to start in Windows XP Mode

  • Got the error saying that unable to start Windows. Now, it freezes after loading Windows.

    Original title: Windows Recovery Error Question

    Earlier I was looking at my computer, running a virus because my computer scan playing strange earlier. Every time I start Windows, I would be spammed with windows titles 'open with... '. ». I managed to open the Task Manager and get rid of all of them, but my computer shifted significantly again. Whenever I close it and restart the same thing would happen. I opened my virus scanner and started running it. Of course, he had a virus.

    As I was waiting for the analysis at the end, my computer suddenly closed and restarted without any warning at all. It froze on the splash screen. To stop and restart my computer again, I received a message that says:

    "Unable to start Windows. A recent hardware or software change might be the cause. If Windows files have been damaged or misconfigured, Startup Repair can help diagnose and fix the problem. If the power was interrupted during startup, choose Start Windows normally. »

    I was given two options: Launch Startup Repair (recommended) and start Windows normally. When I select the Startup Repair tool, I am taken to a screen with a loading bar that says "Windows is loading files... ». After loading, the screen would freeze. If I try the other option, I am taken to the splash screen and it would freeze.

    Is it possible to fix this? Any help would be greatly appreciated.

    Hello

    I suggest to unplug an external device connected to the computer and then try to start the computer and check if it helps.

    Otherwise I suggest you to contact the computer manufacturer for help.

  • Satellite P15-S420: unable to start Windows XP

    I hope that all makes sense... I'm unable to start after the start page of Windows XP. I think I have assumed that the computer turn off when there is no. The battery may have exhausted and when I plugged it back in and tried to start it would not.

    When the Windows start page is in place, it seems that HD works for awhile, but stops and goes no further. I am able to boot in safe mode and have tried to restore with no effect. When I click on Toshiba Manager of power supply in the control panel I get "Policy of NoteBook Load Fail" this could be a problem.

    What do you think???
    Oh, I have a Satellite P15-S420.

    Hello

    In my opinion, this power saver error message occurs because you started the laptop in safe mode. In this case, the OS doesn't use the Toshiba drivers that are required for the use of additional applications.
    You write about the restore procedure. Have you tried to install the laptop with the supplied restore CD? If this isn't the case, then try it.

  • Unable to start Windows

    I have an iMac 13.2 running OS x 10.11 El Capitan, I also use windows 8.1 as a secondary OS for some of my games.

    The problem is that I wanted to try the Beta of Sierra 10.12 and partitioned my HARD drive for the triple boot, version beta worked fine, but when I tried to start on windows, I got a message saying "no operating system found". There are still some my data on the bootcamp partition, but I can't start windows... Is there a way to fix this? I don't want to back up my important files and reinstall everything...

    You cannot partition a disk containing a Boot Camp partition. Back up your data, then start again.

  • I have a dell xps with vista and get the error "unable to start windows.

    I can then choose the launch startup repair or start windows normally.  as soon as I clicked launch startup repair, he says that it is not able to PC repair.  I tried to enter safe mode, it restarts, flashes a blue screen and takes me to start the reboot system again.  I tried to run a recovery from a previous version of my sw windows (via the options in advance in the Startup Repair menu), but this does not solve the problem of boot loop.  I can get to a c prompt, but that's all.  I prefer not to use the dell factory image restore and losing all my files.

    today

    Run dell diagnostics

    http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&CS=19&l=en&s=DHS&docid=DSN_A9E3A15597A04AFBB02EE16785D39C5C&isLegacy=true

    Data recovery

    1. remove the hard drive and it slave in another computer

    2 buy or borrow a USB disk drive hard put in yout case then plug it into another computer and read the hard drive like this

    3. try Knoppix

    http://www.Knopper.NET/Knoppix/index-en.html

    BUT this method 3 depends on your hardware in the computer that failed

  • Start repair cannot find a problem, but are still unable to start Windows Vista successfully.

    So here's the skinny.  I have a PC with Windows Vista Home Premium 64-bit.  I came home today and I tried to start it up, it got to the point where the bar is be thrown backwards and then what seems to have been that a BSOD flew for a fraction of a second the power cut and the system restarted.  Restart Start Up Repair did not work (you cannot determine the problem).  Could not start safe mode, and when I went to all our restore points had mysteriously disappeared the system recovery.  I checked the material widely to find errors, and it doesn't seem to be a hardware problem.  Since at this stage would not worth the hassle to track down a Vista Home Premium disc to make a repair (which I'm not sure would work based on reading other forums) a Windows 7 upgrade would solve the problem?  If that won't accomplish anything, I at least would be able to rifle through the old partition and get my stuff is back with a fresh install of Windows 7 on a new partition?  What can I do, or I am the GROUND.  There are a lot of things on this computer and I would be sad to lose.  Unfortunately, we are a company household risky here and nobody listened to me when I said that we really need get an external hard drive to make a backup, so we don't have not one.  Help would be greatly appreciated.

    Hi Loveofsporks,

    You are able to start Windows now? If this isn't the case, follow the steps below.

    1 restart your computer and immediately press the F8 key until you reach the menu Advanced Boot Options.

    2. Select Disable automatic restart in the event of system failure

    3. restart the computer.

    4. After you receive the exact error message.

    For an upgrade to Windows 7, you must be able to boot into Vista. A clean install would solve your problem if it's related software. Regarding your data, try to connect the hard drive to another computer as a slave drive to see if you can recover your data. You can check in the recovery software from 3rd party in option.

    * With the help of third party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

    Dena
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I'm unable to start Windows Security Center "error 193: 0xc1»

    Original title: I cannot start Windows Security Center

    Hello

    I manage not to launch Windows Security Center, I use windows 7 64-bit.
    I go to services and local services-click and scroll down to Security Center, I then click on highlight, then click Start, I get a loading bar but then an error message that reads: error 193: 0xc1
    How can I get the business to start?
    Thank you very much
    Nick

    Hello

    You did changes to the computer before the show?

    Method 1:  SFC scanner.

    System File Checker (SFC) scan will replace the missing or corrupted system files on your computer.

    Use the System File Checker tool to troubleshoot missing or corrupted on Windows Vista or Windows 7 system files:

    http://support.Microsoft.com/kb/929833

     

    Method 2: I suggest you make a system full scan just to be sure.

    Here is a link that will give you information on how to perform a full scan of the system:

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  • Unable to start Windows - all deleted foreign devices

    Mr President.

    My operating system is windows xp. When I start the computer it looks welcome. and after that, nothing will come.
    I remove all the usb article. just attach monitor, mouse and keyboard.
    What can I do?
    Please help me sir.

    Try the last known good configuration:
    http://support.Microsoft.com/kb/307852

  • Lsass.exe system error object name not found, unable to start Windows in any mode.

    I am working on a friends computer who has a problem, it does not boot in any mode.  This includes everything and all alternate Mode without failure, last known good Configuration and other options in between.

    The computer is an old one but running Windows XP with Service Pack 3 and is updated from a few months ago.  He had a program to update AVG as well as several anti-spyware installed SpyBot, Adaware, and Malwarebytes programs.  Sometimes, the computer had a virus or spyware that was eventually deleted by the user with these programs in the past.

    I searched the internet for at least 8-10 hours looking for solutions without real success.  If not all of you with this problem, most eventually do a full reformat their hard drive.  This owner does not have a recovery disk (lost?) with their computer for that and they have important documents that they would be saved.  A solution (last resort) is to remove the hard drive and put it in my computer to copy documents on a cd/dvd.  It is very likely to buy a newer computer at this stage anyway, but needs these documents

    -----------------

    What happens is after the start screen of Windows, but before the Welcome screen, a box with the lsass.exe system error error: object name not found appears.  Clicking on it just restarts the computer to restart the process.

    I used a boot Norton cd to test the virus in case it might be this worm Sasser, sometimes associated with this error and it is clean. so I really doubt that this problem is associated with that.  Also used checks and drive to scan to check for errors.  Don't check, there is no way to go back to a previous restore point or configuration.

    Tried to use the recovery console out of my Windows XP installation disk: in this case I tried to develop a copy of the file lsass.exe on the hard drive, but it could not extend the file.  I tried several times with the same results.  Don't really know if that would have helped it worked.

    At this point, I'm really at a loss on how to continue.  Any suggestion would be appreciated and thanks in advance!

    Your friend's computer is not likely to be infected by the Sasser worm that this virus is many, many years now. Extract the data on the drive and do a clean install/factory restore of Windows. You can usually buy the mftr computer recovery media. (if an OEM brand like HP, Dell, etc.). low-cost. If you decide to reinstall Windows, test the material first to make sure it's healthy. Or skip reinstallation if your friend is going to buy a new computer and just take the data for him.

    http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot
    http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to
    http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - what you will need at hand

    1 remove the drive and put it in a box of USB drive or use a USB adapter. Attach it to a computer that is running a working XP/Vista/Windows7 installation. Use the work of Windows Explorer to copy the data to the hard drive of the system to the rescue and burn data on cd or dvd, or copy it to an external hard drive. I prefer not to do it if I know the drive is infected because he has a chance to infect your host system. In these cases, I use #2 below.

    2. you can start the computer target with a Bart PE (XP only) or Linux Livecd such as Knoppix or Ubuntu and retrieve the data in this way. This has the additional advantage to tell you if the problems you are experiencing are hardware or software related because if the computer behaves perfectly in Linux, you know that Windows (software) is the culprit. Conversely, if the computer behaves badly under Linux, you will know that there is a hardware problem. This is general information on the use of Knoppix for the recovery of data when you do not have Windows:

    You will need a computer with two cd records, one of which is an engraver of CD/DVD OR a USB thumb drive with enough capacity to contain your data OR an external USB hard drive. Download Knoppix .iso image file and create your bootable CD *. If you do this in a previous (XP or Vista) operating system, you will need the third burning like Nero, Roxio or freeImgBurn software (Windows 7 can burn .isos natively). Burn as an image, not in the form of data. Then boot with the CD that you created and the Windows files will be visible under Linux. If you want to burn CD/DVD, there will be a Linux burning program to use.

    * If your computer has only an optical drive and you want to use this drive to burn data or need to test drive, you can create a USB bootable Linux instead of a bootable CD. This site will show you how to do it-http://www.pendrivelinux.com

    http://www.Knoppix.NET
    http://www.nu2.nu/pebuilder/ - Bart PE Builder

    See also - http://lifehacker.com/5504531/the-complete-guide-to-saving-your-windows-system-with-a-thumb-drive
    And for future disaster recovery programs - http://www.elephantboycomputers.com/page2.html#Backing_Up

    MS - MVP - Elephant Boy computers - don't panic!

  • "Unable to start Windows. A recent hardware or software change might be the cause. »

    http://prntscr.com/83io5  (Typed it upward in Notepad on my desk)
    It's the splash screen I receive. I tried all the options unique it says, including the drive installation and repair it. However, when I try to fix it through the disk it evokes just similar picture blue background on the Windows Vista installation disc, but it is not raise one of the interfaces for me fix or repair windows.
    When I try all other options, it is as windows will load, but before that the bar ends or whatever, a blue screen with text flashes on really fast, then disappears without giving.
    The only thing that's happened before this started to happen if it fell off my table which is like 3 feet off the ground. Nothing else and it worked fine after that. I took a NAP, woke up to the top and BAM. He does this.
    Any help please? Thank you.

    Better files so that you can register, it looks like your hard drive is damaged!

  • Unable to start Windows Media Player 11

    Windows Media Player 11

    I have Windows Media Player 11 on Vista Home Premium 64-bit and it will not open and I can't delete or update.  I need help to make it work.

    Hello

    Have you recently installed another player?

    Right-click on taskbar - Task Manager - processes and see if WMPlayer.exe is already hidden.
    If the end then on her process.

    --------------------------------------------------------

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    ---------------------------------------------------------------------------

    Have you recently added stores or ANY application from Stardock?

    Using 64-bit Vista?

    Can you think of recent things you did in WMP which could be the cause? Have you added
    recently another player or an add-on for WMP?

    When I try to use Windows Media Player 11, the program does not start, or some UI elements
    are empty - a Mr Fixit
    http://support.Microsoft.com/kb/925704/en-us

    Maybe something here
    http://msmvps.com/blogs/chrisl/articles/17315.aspx
    and here
    http://msmvps.com/blogs/chrisl/Archive/2004/10/30/17399.aspx

    Check here the news of WMP11
    http://zachd.com/PSS/PSS.html
    ----------------------------------------------------------------

    Do this to reregister the Jscript.dll and Vbscript.dll files.

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    type or copy and paste-> regsvr32 jscript.dll
    Press enter

    type or copy and paste-> regsvr32 vbscript.dll
    Press enter

    Restart and if all goes well, it will run now.

    --------------------------------------------------------------

    Have you recently installed another player?

    Reset your associations:

    How to set default Associations for a program under Vista
    http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html
    How to associate a file Type of Extension to a program under Vista
    http://www.Vistax64.com/tutorials/69758-default-programs.html

    I hope this helps.

  • Unable to start Windows or run programs

    original title: Virus?

    OK, here's the deal. Everything worked fine but now its all bad parties. I was using my computer, Windows Vista, when AVG (antivirus) picked up a malware file. I put in the vault, then deleted. I don't remember what was the name of the file. Then after that when I click on any program the box appears asking what program to use to run the program? So, when I click on internet explore the box appears asking what program to run with? I rebooted and am now in safe mode. I went to do a system restore but it says this "there was an unexpected error, the setting is incorrect (0 x 80070057)" so I looked up the error online. The fix told to run SystemPropertiesProtection.exe but when I get on my computer, he said he hasn't! Can you get it someone please let me know what the devil is going on? I ran AVG in safe mode, and it found no virus. Thank you

    Update: I just discovered that the tool (SFC.exe) System File Checker is absent as well.

    Hello

    · What is the number and the model of the computer?

    Try the following steps:

    Step 1:

    Run the fix it from the link below and check if this can help:

    When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program: http://support.microsoft.com/kb/950505

    Step 2:

    Now run the analysis of verification of the file system on the computer, for the steps see link below: how to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7: http://support.microsoft.com/kb/929833

  • Unable to start Windows Vista

    original title: problem with windows vista home premium does ON WITH HER... WINDOWS DOES NOT... I HAVE TO USE THE SAFE MODE ON... Help!

    I had a problem with this windows... I think its 8-16 bit... When I turn on my laptop, the windows no longer works... I have to use safe mode for it... it is say like there was something missing, windows cannot start & not useful to insert the CD to repair it... Maybe the windows component was missing... what I need to do? I really need help... I got a lot of work to do with this ;(

    You have the CD. If so, insert it and restart. Follow the steps in the "repair".
     
    "Mr. yoe" wrote in message news: 94fada0e-6724-4af7-b7e2-f85e29c5546b...
    > I had a problem with this windows... I think its 8-16 bit... When I turn on
    > my laptop, windows no longer works... I have to use safe mode for the
    > it... IE like something was missing, windows cannot start & need to
    > Insert CD to repair it... Maybe the windows component was missing... I have
    > do? I really need help... I got a lot of work to do with this ;(
     
     
     
  • Unable to start Windows Media pPlayer 11 to share media: Error 1068 dependency service or group could not start

    1068

    Cannot start media player 11 to share media. Error 1068: the dependency service or group could not start

    Hello! I found the solution to my problem here:

    http://wiki.answers.com/Q/Why_do_I_get_an_Error_1068_when_I_try_to_share_my_media_in_WMP11_in_WXP_pro_sp2_start_service_in_services

    It is possible that it would be more useful for someone.

Maybe you are looking for

  • SQL 2005 update failed. error code 663.

    I didn't know an answer to my previous question, which was:-my computer to stop asking me to update.  I try and it tells me that try to update sql 2005 failed.  error code 663.  This has happened for a long time.  I am a user of the computer only so

  • Z10 blackBerry unlocking a Z10

    Have a phone subscribed to Bell, provided an unlock code, does not seem to work, went to the SPA from Bell to Conestoga Mall, they he spent 10 authorized trials.  Is it possible to unlock the phone at this point.

  • With problems of content is added to the playlist

    We have just upgraded to 5.2.1 and after creating a new user with the appropriate rights, they get this when trying to add content to a playlist in a presentation. I created a 2nd user with the same problems.  None of my previous users (prior to 5.2.

  • is it safe to run HP Pavilion dv6 without the battery?

    my model is the 1330sa or any dv6 models?

  • Workflow of Storyboard scripted to slide show

    I am new to InDesign, and I was wondering the best way to move from the table of Storyboard to different exports as a slide show and a short video. My table of Storyboard consists of pages in landscape with the actual slides in 4 x 3 in the center of