I'm with TALKTALK, but I had the chance to be on the net for 2 weeks in total

Similar Questions

• I need to format the hard drive but don't have the windows vista disc to reinstall, but have had the key code that vista was preinstalled do I have to buy a new drive for vista

  I need to format the hard drive but don't have the windows vista disc to reinstall, but have had the key code that vista was preinstalled do I have to buy a new drive for vista

  Hello

  How to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• How can I re - install Windows 7 on my computer if I ever had the installation for Windows 7 disk? (ENGLISH-SPANISH)

  How can I re - install Windows 7 on my computer if I ever had the installation for Windows 7 disk?
  I have a laptop with Windows 7 installed on it, Original but I do not have the installation for Windows 7 disc, since I bought the computer I had never the disk. How can I re - install Windows 7 without having to purchase another license?
  How I can restore Windows 7 en mi computadora TR nunca he tenido el disco instalacion of Windows 7?

  I have a computer laptop ASUS not con Windows 7 original wont, pero no tengo el disco instalacion of Windows 7, from which the Adquira no he tenido el disco. How I can restore Windows 7 sin tener comprar otra license?

  Your computer may have a recovery partition which is accessible when you first start the computer (usually by typing the key F9 several times will begin the recovery process).

  This will reinstall Windows back to the point when you received everything first, therfore backup important data files (Documents, photos, music, etc.) on external before starting. Be prepaired to reinstall all the software can also be purchased and installed (rounding up of multimedia installation and product key codes).

  For more information contact the ASUS Technical Support: http://www.contacthelp.com/directory/Shopping/Computer+Hardware/Asus?ListingID=342

  J W Stuart: http://www.pagestart.com

• Windows XP has been infected with a virus/trojan via the net and will pop up window wanting to access the app tray and Windows install wants to work.

  Original title: tray app

  I have a PC with Windows XP. He has been infected with a virus/trojan via the net. I can't access the net, but I have now access to readers of DVD and CD. On the screen is a window who want access to the application of the status bar. I don't have a restore date prior to infection. Installer Windows guard eager to work. How can I get going again and remove the virus/Trojan? I also have a laptop with windows vista. I can download MSE on my laptop for windows XP and copy it to a CD and then use it on the PC?

  Hi shanethornton,

  You can try to download Microsoft Security Essentials from the link below for a CD or a USB key and try to run it on the infected PC and check out them.

  See the link to download Microsoft Security Essentials:

  http://www.Microsoft.com/security_essentials/?WT.srch=1

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I bought Acrobat Pro DC and followed the instructions download, but cannot find the link for the download. Help, please!

  I bought Acrobat Pro DC and followed the instructions download, but cannot find the link for the download. Help, please!

  Have you checked with link below?

  Download Adobe Acrobat products. Standard, Pro | DC, XI, X

• Never had the CD for my laptop Window XP Pro OS or Pro Office, Visio, project and PP but now I need to reinstall.

  I need to change my phone to a double partioned Window NT (drive C) and Window XP Pro (drive E to a single disk with XP but I have not never have the CD of the operating system XP or Pro Office, Visio, PP and the project.)  I understand I have to format the drive unique and which will be wip on everything, including the data of the user.  How can I get the OS and the App CD "s to proceed?

  See: How to replace Microsoft software

• Virus scan Avira would stop working and freeze the computer whenever an analysis was carried out. Tried to uninstall and reinstall, but still had the same problem. Impossible to uninstall now due CCPLG. XML error.

  Hello, I have been using Avira anti-virus on my computer for the past two years with no problems.  I run a scan on my computer every day and noticed problems with it a few days ago.  The analysis would be about 21% when he would stop scanning and freeze my computer.  The RAM would be also be maxed out at 100%, and I need to restart the computer manually.  When I ran the scan in safe mode, it worked fine, but then continued to not work when the computer is not in safe mode.  I would also get a security alert Windows telling me that Windows did not antivirus software on this computer.  I tried to do a system restore which goes back to the day before the problem started to happen with the scan, but I still have the same problem.  I tried to uninstall the program again, but I get the message: Setup could not determine feature control file, or was not able to read it properly the. I also received a message about CCPLG. XML. I don't know what to do at this point or what was wrong in the first place with my antivurus software, but I feel that I continue to do worse with everything I want to do about it.  If you can offer any help with this problem, it would be much appreciated.  I have to go to work now, so I'll check tomorrow and hope that someone decided to go back to me.  Thank you.

  There are similar problems listed in the Forums of Avira.

  Have a read of the info in them; who can help you:

  http://Forum.Avira.com/WBB/index.php?page=thread&ThreadId=77368

  http://Forum.Avira.de/WBB/index.php?page=thread&PostID=729964

  Both above the Avira Forum entries have the same problem, CCPLG. XML, like you with solutions provided.

  http://www.Avira.com/en/support/kbdetails.php?ID=135

  Avira has also a manual uninstall. read the link above.
  Try this: uninstall/reinstall Avira as it

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:http://www.avira.com/en/support/

  Contact the Avira Support on this problem with their anti-virus software.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also, try asking the security of Vista and the Privacy Forum.

  They know a little about the Avira software there.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/threads

  See you soon.

  Mick Murphy - Microsoft partner

• Socket connection in the Simulator with MDS, but not on the curve

  Hello

  Working on an application using socket connections.

  SOC = (SocketConnectionEnhanced) Connector.open ("socket: / /" + address.ip_number + ":" + address.port_number + ";") deviceside = true");

  Proceed to use a DataInputStream and DataOutputStream to communicate.

  The server works, can transmit very well with the Simulator, but also another curve (not same model). (There is a small chance that deviceside = true has not been passed as a parameter when we tested on the curve, which would go through BES? This is probably still there however).

  IMHO, this means the places that the question could be one) how the code is implemented on the client phone or b) phones or their settings (have 4 curve 8530 s on the same CDMA network).

  -These phones have already activated in the last days, is there the chances that something is missing from the service book to allow socket connections? (I doubt that what I downloaded messenger ping I assume uses taken... and everything is fine).

  No authorization application that I put?

  Ideas! Please let your mind flow. Thank you!

  To all those who might find this thread after encountering the same problem:

  The issue was with the DataInputStream... available() was ALWAYS return zero, even if there are more bytes to read. This is our 8530 s curve 4 tests phones. Tried on another curve and "BOLD" and they did not have this problem.

  Use available() stopped and tried reading for much bigger than one of our packages will be (5000 bytes).

  Have some phones to test with 5.0.0.337 that they would not work with that.

  After the 5.0.0.1000 they all work perfectly.

  I read somewhere that the available() issue has to do with J2SE-> J2ME problems, something on a wrapper. This problem exists (or existed) with TSL/SSL apparently (sorry I can't find the thread I get this info, if someone really wants to see him answer and I'll get the link in the history of my browser of laptops).

  Hope this helps someone!

  B

• Why a connector would proceed with Eclipse, but not in the export as a jar?

  When I start my connector in Eclipse, I can start it up without incident and Adobe Drive shows that it among my recent connections. I then packed the same project as a jar according to the instructions provided in the developer notes and when I try to start it, first of all, I have to explicitly say "Add Drive" (i.e., he does not remember the credentials of y) and especially when I try to connect I get an error:

  Root folder missing mountpoint (5001 |) Path: null | User: lhurd | Active principles: false)

  Thoughts on what I should do differently?  This puts me in an awkward situation, as I reported on progress and now can't dpeloy my changes!

  Thank you

  Lyman

  Figured it out.  I had added to the GetAssetsHandler code that did not work, but when I tried to connect by starting the program in Eclipse he gave me the possibility to restore a "recent" link that I used.  When I started the connection from scratch even under Eclipse I had the same rmessage erro (and corrected).

  See you soon,.

  Lyman

• I can go to the internet and all, but on the icon say "NOT CONNECTED" and I tried to connect to the network for 2 weeks already... its still not not workin... Please help!

  I tried to connect to the network several times but its still saying 'not connected' but I can go to the internet and all...
  and I also try to fix or diagnose, but its still not not workin...
  Please help idk what 2 do more...

  Hello

  Good luck, you need technical support for a real computer store or system manufacturer is supported.

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon. You can download these on another
  computer if you need to and transfer on removable media.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for card (NIC) network and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• My computer is no longer able to connect to the internet. I can download updates of Windows and Adobe but not surf the net in the browser.

  original title: internet connectivity

  My computer is no longer able to connect to the ' net.  This ab took place two months ago.  I still get updates from MS and Adobe, but will not connect to any Web site.  I've tried wired and wireless.  All my other computers are connected again and the router and the modem seems to work properly.  This occurred after a windows update has been installed automatically while I was away and there was no restore points.  Other connectivity issues, the system works properly and I am connected to my local network, not just the internet.

  Hello

  You can follow below link that can help you to solve your problem:

  Reset Internet Explorer settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/reset-Internet-Explorer-8-settings

• Episode not listed is not on the shop for a week

  Hello

  My podcast is: https://itunes.apple.com/gb/podcast/colossalcast-drum-bass-podcast/id1076443810? mt = 2

  My flow is: http://feeds.feedburner.com/PodcastsOfficialColossalReactionWebsiteLondonBasedDj AndMusicProducer

  A week ago I posted my last podcast episode. He made his appearance to subscribers, but not on the store. I understand that this may take a few days for the store to update, but a week seems a bit long.

  Since downloading the last episode, I changed the work for the podcast. The new artwork is even up to now, I imagine that they scanned my already average flow?

  Any help would be grateful.

  Episode 6 is displayed when you subscribe, so obviously that the power supply is OK. It was reported recently the Bank of failing to update the odd episodes. You need to contact Support and ask for a re-indexing - which should solve it for this episode, even though it may eventually happen again. Go to https://itunespartner.apple.com/en/podcasts/overview and click on the link "Contact us" at the bottom of the page.

• Will not wear my watch for a week... should I leave it on the charger for a week or take off for the week?

  Will not wear out my watch for a week... should I leave all week on the charger or leave it?

  Hello

  You can leave it on the charger if you wish.

  https://help.Apple.com/watch/#/apd2b717523a

• keep alert Miss police arialmt replaced by arial mt "BOLD", but I had the arial mt in my fontbook

  My first pro keep saying that I'm missing fonts arial mt but I checked my fontbook, arial mt is installed, I couldn't find it in application. I tried to reinstall and restart it does not help. And there is no option to stop the alert, it just keep poping up. Anyone have the same problem? How to solve this problem? Thank you!

  You can disable the message in the indicator preferences/general/Show event.

  I don't know how to solve the problem. I have had this in the past too, used a different font.

• Hello, I need help I just hit Photoshop on your web site, but I had the wrong version, I need for MAC not PC

  I need to know how to change the version from PC to Mac please I just buy it but I have not downloaded

  Use the chat here:

  Contact the customer service