I managed to reduce the font size in my sri_94@live.co.UK to the tiny size less than a block of code, it is impossible to read.

Similar Questions

• I've just updated my LR, but still can not read the new RAW files of my brand new Sony a6300. said 'impossible to read these files' is Adobe should update it program with new firmware to manage these new folders? Or something escapes me?

  I've just updated my LR, but still can not read the new RAW files of my brand new Sony a6300. said 'impossible to read these files' is Adobe should update it program with new firmware to manage these new folders? Or something escapes me?

  You updated Lightroom to version 6.5? This is the version you need. What is the exact wording of the message you receive?

• My computer is constantly disconnected from the internet and to reconnect I just unplug the cable for less than a second and it starts to work instantly.

  My computer is constantly disconnected from the internet and to reconnect I just unplug the cable for less than a second and it starts to work instantly. Does every 5 to 10 minutes and it gets frustrating. It is not the cable modem because it is constantly connected, and I repeatedly checked.
  I have this problem with all programs on the internet and she does every day and probably every 5 to 10 minutes.

  Hello

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Select start measurment only if the temperature is less than 26 ° C for 10 seconds

  Hello

  I have a program for a measure of viscosity/temperature use DasyLab 12

  I burn my brain to try to activate the measurment only if the temperature is less than 26 ° C for 10 seconds.

  Click on 'Start', then control the temperature, if the temperature stay below 26 ° C, for 10 sec then allow to click the button "start measurment.

  If this isn't the case, restart the control.

  Thanks in advance!

  Ivan

  Simply enter the channel number. If this string has a name, DASYLab will automatically replace the figure.

• What digital SLR camera is the best movie less than $1,000?

  What digital SLR camera is the best movie less than $1,000?

  Hi there somethinghey! If you are referring to DSLR cameras with video recording capabilities, please check this link for information and comparison.

  If my post answered your question, please mark it as "accept as a Solution.

• A3 landscape artboard. When the zoom is less than 100%. the appearance of the work (lines) in staircase, I can tell this resolution because something I have to zoom and it disappears. I understand the difference between vector and raster as well... looks

  A3 landscape artboard. When the zoom is less than 100%. the appearance of the work (lines) in staircase, I can tell this resolution because something I have to zoom and it disappears. I understand the difference between vector and raster so... this kind of problem is like when you zoom too in an image and it becomes pixelated... but otherwise...! I have a macbook pro 2012 model, the retina. is my screen resolution. I thought that the apple screen product meet good standards of adobe creative products... Reviews

  Check if the switch between the GPU and CPU makes a difference: Cmd E

  Or turn in the preferences: GPU performance.

• MacBook Pro running Mac OS 10.6. The font size for tabs and bookmarks toolbar is too small for comfortable reading for older eyes. Is there a way to change or expand?

  The font size is smaller and harder to read than on FF 3.x. Want to make some larger or to choose a different, more readable font altogether.

  Extension of theme font & size changer.
  
  https://addons.Mozilla.org/en-us/Firefox/addon/theme-font-size-changer/

• laptop computer (HDD 320GB) with windows 7-64 bit OS.iam unable to shrink the drive c less than 155 GB

  Hello Sir,

  recently I bought the laptop (320GB hard drive) with windows 7-64 bit OS.iam unable to shrink less than 155 GB c drive please help me. I want to reduce this to 90 GB

  Its also the case that win7 takes only supported 4 basic partitions and you can't mention what Disk Management displays for drive 0.

  And also if a pre-installed version of victory, if you manage to create partitions and at a later date, you will need to use your recovery disks, that may well destroy all created partitions.

  For what reason you want to partition?

• U2715H makes buzzing when the brightness is less than 85 ~.

  My new monitor U2715H was beautiful, but makes an annoying Hum/Buzz sound. I found that I could get the sound to go by increasing the brightness above about 85. Given that this brightness level was too high for my application and the sound was distracting, I contacted Dell support and said it was a very unusual problem. They sent me a replacement monitor that I just was put in place. Unfortunately, the replacement screen suffers exactly the same problem! I found messages here to describe this same question in other models (U3011, U2312HM) a few years ago but have not found how / if the issues have been resolved subsequently. Any advice on getting a monitor which do not suffer this problem and/or technical explanations for why that should happen would be very useful.

  A little more internet research gave a lot of information on this issue as well as possible workarounds:

  www.SilentPCReview.com/stop_lcd_whine

  www.SilentPCReview.com/.../viewtopic.php

  www.gHacks.net/.../Decrease-Noise-of-LCD-Displays

  I will try to adjust the brightness ~ 80 to remove the buzz and then use a software solution to reduce the observed brightness.  This seems as good as the appropriate brightness swing the OSD setting and eventually consume 10 to 20% more energy, but can be a viable compromise.

  Dell Ultrasharp monitors so I knew there was a good quieter alternative to the U2715H, I would definitely try this, but the information I have suggests that this question may be present in 27 ".

• How to create a validation script that sets my value to a minimum of 1 (even if the calculation of the value is less than 1)?

  I use a notation simplified field to calculate the value

  (kg1 * 1.5) - diaporama1

  I want my value to only a minimum of 1 at any time, even if the actual value itself is less than 1

  Thank you!

  Add this code in the custom validation script:

  If (event.value<1) event.value="">

• SNA on the primary is less than on previous day

  Hello guys, talk like that in this forum but there are ways to solve this problem and I need to know if it should be solved or not.

  I created the physical standby and it worked very well. created archive_log files had Yvert number exactly as primary, but then my colleague rebooted the virtual machine on which eve has been fixed, so obviously waiting has been closed to the ground.

  in the root I used the command: service iptables stop;

  then I started the listener in oracle: lsnrctl start;

  and then I used this command in sqlplus:

  (1)startup nomount;

  2)alter database base_de_donnees eve of Mount;

  3)ALTER DATABASE RECOVER MANAGED STANDBY DATABASE disconnect from the session;

  This bound mode standby and main cause I saw my archive_log on two database generated files BUT:

  I knew my last name of file archive_log on primary was 1_4359_870764186.dbf and the dmp Eve last file was 1_4360_870764186.dbf (number of SNA is a times). then I looked more carefully and realized that the last file dbf standby - 1_4360_870764186.dbf probably changed all the time, cause I've refreshed it's change time was always equal to this day., but it did not record cause of changes its size was always the same: 51201 K;

  
  

  then I tried to change the journal manually and typed on primary: alter system switch logfile; who created on primary 1_4360archive_log_870764186.dbf and Eve 1_4361_870764186.dbf, I looked carefully on standby and realized that it was now 4361 51201 K size and changed every minute, instead of 4360;

  then I looked at sizes of 4360 archive_log file on two databases, and they were equal; as was 4359 on databases and all other log files;

  so I feel that the log_files are properly reversed, their size and the SNA are exactly the same. but for some reason any backup database creates this last archive_log every minute and there always 51201K size.

  
  

  in my alert log files is all cool. It is said:

  Fri 31 Jul 09:25:35 2015

  Archives journal entry 27 additional for each thread 1 4360 rlc 870764186 0xd6315b1a dest ID sequence 2:

  RFS [2]: open the newspaper for thread 1 sequence 4361 dbid-701415654 branch of the 870764186

  Fri 31 Jul 09:25:39 2015

  Recovery Media Log /opt02/archive_log/1_4360_870764186.dbf

  Media, recovery waiting for thread 1 sequence 4361 (in transit)

  Yes, it says he's waiting for the sequence 4361 which is not created on primary and should not be created in the standby mode, but is created in waiting until this last file, which is of size as I said is 51201K and changes every minute.

  (1) the question then is, what is?

  (2) why it was caused when I assembled the night before and primary?

  (3) it will have a detrimental effect on my database pending? (should I try to fix it, or should I recreate standby database? or should I leave it alone?)

  
  

  Hello, I think this is the standard behavior, almost in 11g, I checked against 2 separate dataguard, with and without the application of real time, and I got the same result.

  which instance standby waiting for the next archivelog, alert, you can see:

  Media Recovery wait thread 1 sequence xxxx (in transit)

  and you're right, the size, it is not the same as in the primary.

  It seems that oracle creates beforehand the archivelog current mode standby with 50 MB and when this archivelog is finalized in the primary and he was transferred to the day before, it is resized to the actual size.

  Kind regards.

• Error code 37. I have a model CM5688E gateway with Windows Vista Home Premium. My Optiarc DVD RW AD - 7203 has enough work. How to operate again give idea? The computer is less than 2 years.

  Error code 37. I have a model CM5688 E gateway with Windows Vista Home Premium.  My Optiarc DVD RW AD - 7203 has left a couple of weeks of work.  Anyone have an idea how I can get it working again?

  Hi Sunday47,

  There are many causes of Code 39 errors:

  ·         A required device driver is missing.

  ·         A required binary file is corrupted.

  ·         There is a problem with the file I/O process.

  ·         A driver that refers to an entry point in another binary file cannot load.

  I suggest you try the following steps:

  Step 1: Run the fixit available in the link below

   

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

  If the problem persists,

  
  Step 2: Uninstall and reinstall the drivers.

   

  1. click on start and then click Control Panel.

  2. click on system and Maintenance, click System, and then click Device Manager.

  Note If Control Panel is in Classic view, double-click System and then click on Device Manager.

  3. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  4. in Device Manager, expand CD-ROM/DVD-ROM drives, right click on the device CD and DVD and then click on uninstall.

  5. When you are prompted to confirm that you want to remove the device, click OK.

  6. restart the computer.

  After the computer restarts, the drivers will be installed automatically.

  Click here for more information.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why merge GUI does not allow the creation of less than 40 GB drives?

  Is there a reason, like the vmware command line tool - vdiskmanager.exe allows a minimum size of 100 MB?

  If there isn't a specific reason, the GUI can be changed to allow smaller drives.

  The smaller the VMware Fusion GUI using virtual hard drive I could do etait.11 GB or 112.6 MB so small how do you?

• Why Acer does not sell things that they expect to be the bricks in less than 2 years?

  Didn't know where to post this, because it effects all buyers, but I chose because the 3 laptops I bought here are all v series

  I like to keep good records and I have a file with all my info purchase inside but I can't include a link to one of my products because Acer keep active links for a long time. There is no reason why they can't keep a static page where the URL is a model number... This isn't as they need this URL to another model.

  Works great:

  http://www.Acer.com/AC/en/CA/content/model/NX.MUUAA.001

  Acer assumes that your laptop is more questions:

  http://www.Acer.com/AC/en/us/content/model/NX.M7QAA.004

  Given the lack of documentation they provide on the modernization of their systems to the SSD, etc... maybe I should go with another company anyway.

  It was not hard to find.  NX. M7QAA.004 = V3 - 771 G-53238G75Makk

  http://www.PCWorld.com/product/1274653/Acer-Aspire-v3-771g-53238g75makk-notebook.html

  The page you referred to is a sales page. The first link is a model still available for sale. The second link is a laptop is no longer available.

  It's like saying, why no Chevy retain sales literature on 57 Chevys.

  Is upgrading to SSD and max memory what you want to do? Give me a model number.

• Blue screen in Windows 8. Driver IRQL keeps restarting the laptop not less than or equal

  Separated from this thread.

  Hello

  I have the same problem and probably, I know the reason. I have a laptop Asus UX21E (win pro 8.1). the Wi - Fi network that I use is far from my workplace. my laptop can receive the signal very well, but my laptop can not. I tried to use my laptop as a router for internet access on my cell phone so I followed an instruction to make a new virtual network on my laptop. the statement was like these steps:

  step 1: open cmd as administrator.

  step 2: copy this command and press ENTER: netsh wlan set hostednetwork mode = allow ssid =something key =a number

  step 3: copy this command and press ENTER: netsh wlan start hostednetwork

  step 4: network share physical adapter Internet access to the new virtual network (under the properties and the sharing tab)

  It works very well, but after that this error has occurred several times.

  Thanks in advance

  Hello

  Please contact Microsoft Community.

  I would like to know some information about this problem so that we can help you further.

  • Are what error you referring? You receive the IRQL_NOT_LESS_OR_EQUAL?

  I suggest you try the procedure described in the following Microsoft Help article and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-8/resolve-Windows-blue-screen-errors

  Warning: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Warning: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  If the problem persists, try to install latest NIC drivers, then check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows-8/all-drivers

  Just reply to the State of the question, so that we can help fix you this far.