I may be a driver for hp psc 1355?

I may be a driver for hp psc 1355?

Hello

Check with HP, their drivers support and documentation online and ask in the Forums of HP.

HP - PSC 1355 drivers
http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=306898&LC=en&cc=us&DLC=en&lang=en&cc=us

Support HP & drivers
http://welcome.HP.com/country/us/en/support.html

Contact HP
http://welcome.HP.com/country/us/en/contact_us.html

HP forums
http://h30434.www3.HP.com/PSG/

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

Tags: Windows

Similar Questions

  • Cannot find the driver for a PSC 2175 in list of 64-bit Windows 7 for HP printers

    Cannot find the driver for a PSC 2175 in list of 64-bit Windows 7 for HP printers.  Can anyone help?

    In fact, the way to solve the problem was to open devices and printers, click with the right button on the icon of the HP psc 2170 Series and use troubleshooting icon.  Who finds the driver, thank God.  Found this just by chance!

  • I need a new driver for hp psc 750 for Book 10.8.2 pro... who can help me?

    I need a new driver for hp psc 750. I have a new Version of Book Pro 10.8.2. Who can help me?

    Hello

    You talk about a printer for 7-8 years here. Hope that would help the following link:

    https://discussions.Apple.com/index.jspa

    Good luck.

  • printer driver for hp psc 2400 on windows 8.1

    I have a HP psc 2400 printer running on Windows 7 now I bought a new laptop with windows 8.1 where can I find a driver down load for this new computer, so I can use the same printer on two computers, regardless

    You can use the Windows printer driver 2400 built 8.1.

  • Need Ethernet driver for Satellite P100-425

    Map of Satellite P100 - 425 Ethernet does not work.
    What I supposed to do?
    LAN driver is not good on the page.

    Answer please

    Hello

    Driver Ethernet may be a driver for LAN card or wireless network adapter.

    Which driver do need it; LAN or WLan?

  • Photosmart HP 7520: Is a driver for Windows 10 available for printer HP Photosmart 7520?

    I think in current and installing Windows 10 but was told that there may be a driver for my printer.   I have connected by wire to the tower which is wireless.   Please give advice.

    Paul.

    Drivers and software of printer features complete e-all-in-one HP Photosmart 7520

    Fix and improvements

    • Added support for Windows 10
    • The most recent version of the software includes all previous fixes and improvements.
  • Cannot print/connection of Windows 7 for shared PSC 1315 on the XP Machine

    I have a HP PSC 1315, connected to a computer running Windows XP (32 bit).  This printer is shared.  I can access it from other XP machines on my home network.  I can't access it from my computer Windows 7 (64-bit).  I can see the printer is shared on the computer, but when I double click on it, I get the following error:

    "Windows can't find a driver for hp PSC 1310 series on the network."  To locate one manually, click on OK.  Otherwise, click Cancel and consult your network administrator or the printer manufacturer's Web site. »

    Then I tried to download the driver Windows 7 (64 bit) of HP and installed on my Windows 7 machine:

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-75052-1&LC=en&DLC=en&cc=CA&...

    At the end of the installation, it asks to connect the printer to the computer via USB.  Because I'm not physically the printer connected to the Windows 7 computer, I check the box that says I can't login now and go forward at the end.

    Then I tried to connect to the printer and I get the same error.  I try to locate a driver manually.  I point to c:\windows\inf\ without success (I am * if * the driver info might settle there, but I don't know what the name of .inf).  Windows says that it cannot find an appropriate driver.  Maybe I should be looking elsewhere?

    I found some troubleshooters on the HP website, but it does not give "shared printer on a network" as one of the schemes to solve connection problems.

    I'm a little confused on this one.  Hoping that there will be something simple, I missed.

    Thank you!

    Hello

    Kahless wrote:

    I have a HP PSC 1315, connected to a computer running Windows XP (32 bit).  This printer is shared.  I can access it from other XP machines on my home network.  I can't access it from my computer Windows 7 (64-bit).  I can see the printer is shared on the computer, but when I double click on it, I get the following error:

    "Windows can't find a driver for hp PSC 1310 series on the network."  To locate one manually, click on OK.  Otherwise, click Cancel and consult your network administrator or the printer manufacturer's Web site. »

    Then I tried to download the driver Windows 7 (64 bit) of HP and installed on my Windows 7 machine:

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-75052-1&LC=en&DLC=en&cc=CA&OS=4063&product=374568&sw_lang=

    At the end of the installation, it asks to connect the printer to the computer via USB.  Because I'm not physically the printer connected to the Windows 7 computer, I check the box that says I can't login now and go forward at the end.

    Then I tried to connect to the printer and I get the same error.  I try to locate a driver manually.  I point to c:\windows\inf\ without success (I am * if * the driver info might settle there, but I don't know what the name of .inf).  Windows says that it cannot find an appropriate driver.  Maybe I should be looking elsewhere?

    I found some troubleshooters on the HP website, but it does not give "shared printer on a network" as one of the schemes to solve connection problems.

    I'm a little confused on this one.  Hoping that there will be something simple, I missed.

    Thank you!

    Here's a good explanation of how to share a printer from an XP PC to Windows 7 PC on a network home.  It should work since Windows 7 (64-bit) PC can see the partition Windows XP 32-bit.  What you missed was the type of port to use for the network connection.

    Best regards
    ERICO

  • HP PSC 1350 all-in-one driver for Windows 7 - driver not included!

    My Windows 7 64 bit is supposed to have the included driver for my HP PSC 1350 all-in-one, but he's not here. When I use the "Add Printer Wizard" single PSC series included is 1500 and 1600. I don't have the installation disc (this is a printer to work and they don't give me the disc when they gave me the printer). Now all the sites I go to driver to tell me that the driver is automatically included in my Windows 7, but it isn't here. Help!

    If I try to use the pilot for the series 1500 instead, I get a warning that my printer is working properly or that my computer may not work at all. Another driver which is compatible, or how can I download the correct driver?

    Yes, the PSC 1300 series includes the PSC 1350, this driver should work fine.

  • Driver for PSC 2355 printer

    Hello

    I can't download the driver for the printer hp psc 2355 for windows 7. could you please help me solve this problem?

    Thank you very much in advance,

    Rosamond

    Your device is supported by the printer Installation Wizard.  Follow the link below to download the wizard and it will help you to find the right driver and solve any problem you may have with downloading the drivers from Windows Update.

    http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=OJ-97436-1&CC=US&DLC=en&LC=en&os=4062&Product=422000&sw_lang=

    Let me know if it works for you.

    -Goes211

  • COM1 "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

    Running Server 2003, Web Edition SP2 Build 3790.

    The two ports COM1 COM2 & lost in the Terminal Server session with a managed switch.

    Gives the device as Manager: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) "on both ports.  pilots - serial.sys and serenum.sys (5.2.3790.3959 worm file: 64 KB / KB 18: 2/17/2007) 03:58

    Tried all common solutions driver update and uninstalling/reinstalling SP2 installation rerunnig. But the problem remains.

    Hello

    Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet. Please ask your question in the TechNet forum.

    http://social.technet.Microsoft.com/forums/en-us/winserverhyperv/threads

     

    Diana

    Microsoft Answers Support Engineer

  • My TSSTcorp DVD +-RW TS - L632D does not work, error "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

    And it displays the following message: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ». I tried all the tricks troubleshooting to no effect. I uninstalled and reinstalled and look for the updates to install. What should I try next?

    http://support.Microsoft.com/kb/314060

    Your CD or DVD drive is missing or is not recognized by Windows or other programs

  • Windows XP cannot load the device driver for the CD burner. The driver may be corrupted or missing. (code39)

    I have a HP Pavilion running on XP.

    Device Manager displays the following material: A: HP CD Writer CD16b

    B: pioneer DVD - RomDVD - 116.

    Both have the dreaded yellow symbol showing that they are not working (they do not show in Windows Explorer)

    By clicking on the two points of product

    "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (code39).

    I created the 'properties' of each machine that pilots should be:

    For a. imapi.sys, redbook.sys c:\windows\system32\storprop.dll, pfc.sys and similarly for B machine.

    I copied imapi.sys, redbook.sys, and storprop.sys from another XP computer (which works well), deleted these drivers and pasted in the replacements.

    Does not cure the problem.

    Now the pilot 'pfc.sys' cannot find anywhere else. Click on the driver generates (v 2.1.0.165 Inc. - Padus ASPI Shell)

    I'm out of my depth now. No idea what is ASPi Shell.

    Help, please

    The problem is most likely the pfc.sys.

    What I would say, is to follow the steps under "Windows XP" in the MS KB article:

    http://support.Microsoft.com/kb/982116

    These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

    Create a System Restore Point beforehand and restart the computer later.

    Following steps should remove pfc.sys which may have been left to the wire after that uninstall of software associated with the readers.

    Here is some info on the pfc.sys:

    http://www.Neuber.com/TaskManager/process/PFC.sys.html

  • Audio loss. UAA Bus Driver reads Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39). All the patches?

    Audio loss.  Device Manager indicates Microsoft UAA Bus Driver as: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ».  Tried to update driver and restore without success.  Tried the program of "Fix - It", which has identified an error with the sound system, but said that he could not fix it.  Restored to an earlier date but still what system did not go.  Tried to uninstall and reinstall the driver.  Uninstall was successful but reinstall it read that the hdaubus file does not exist.  I'm a computer dunce.  Any help out there?

    Hi BarbaraWolfe,
     

    There are many causes of Code 39 errors:

    • A required device driver is missing.
    • A required binary file is corrupted.
    • There is a problem with the file I/O process.
    • A driver that refers to an entry point in another binary file cannot load.
    Re-install the driver by downloading it from the link given:
     
    Additional reference on:
    Check if that helps.
  • Add/Remove components error and DVD driver error: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

    Original title: Add/Remove components error and DVD driver error

    Yesterday, I removed several components of windows to attempt to clean my cpu. After the reboot, I noticed that my DVD drive disappeared. I tried to update the driver but told me I have the most updated version, I uninstalled and reinstalled the drive, but I still get the same error. Under Driver Details, it shows that I have a lot of drivers for my Phillips DVD player. However, the status of the device is the following: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) Click Troubleshoot to start the troubleshooter for this device. I've done the troubleshooting, and the two options has not fixed the problem.

    Then I tried to add windows components that I removed, thinking maybe that was the problem. However, when I try to add them, I get an error message that says: 'Setup cannot copy the file zClientm.ex_' it shows the location of this file as being in windows/i386, and of course, the file is located in this folder. So when I go to browse to locate the file, I find and click on it to open it, but I keep getting the same error message that the file is not found and Setup cannot continue.

    I realize that this problem seems very rare and weird, but any help at all would be appreciated. Thank you.

    Hello
     
     
    Code 39: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)
    Explanation of error codes generated by the Device Manager in Windows XP Professional http://support.Microsoft.com/kb/310123
     
     
    Method 1.
    Microsoft Automated Troubleshooting Services scans your computer and detects that the root causes of common problems, then automatically solves the problems that he finds and offers additional resources if the problem is not resolved. Click run now in the article below.
    Your CD or DVD drive cannot read or write media
    http://support.Microsoft.com/GP/cd_dvd_drive_problems
     
     
    Method 2.
    Also, try the methods listed in the section below and check.
    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.Microsoft.com/kb/982116
     
     
    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Windows cannot load the device driver for this hardware (HL-DT-ST DVDRAM GH40F SCSI CdRom Device) because the driver may be corrupted or missing. (Code 39)

    Original title: the answer useful?

    Help, please! Windows cannot load the device driver for this hardware (HL-DT-ST DVDRAM GH40F SCSI CdRom Device) because the driver may be corrupted or missing. (Code 39)

    Hello

    Code 39 means that the driver is corrupted or missing.

    Please make all below even if you have done some before as it is often the set of operations which solves
    the question.

    Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
    Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
    This will refresh the default driver stack. Even if the reader does not appear to continue below.

    Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
    slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    --------------------------------------------------------------

    Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
    are you can reinstall the 'old'. Many use Windows default drivers however some special aura
    ones. Also check the website of the manufacturer of the car.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

Maybe you are looking for

  • tools/options does not work

    HelloI recently changed internet providers and have had trouble with firefox. I have uninstalled then reinstalled version 6.02, it worked well before, but now I can't use the Tools/Options at all. I'm going into it to change the settings and can't ch

  • Clubhouse dv6: my laptop has a webcam but no built in webcam app.

    I have to use a crappy software to take pictures. How can I fix it? I need a webcam application that has a timer and I was hoping it would be a be built in webcam app on my laptop that would do the trick. But there is no application in the first plac

  • Print copying or scanning.

    I have a HP Officejet Pro L7780 when I copy or scan the resulting page is filled with a broad black band. Most of the time, it is in the empty area where there is no image to copy, fill the empty area in black ink so that the paper is damp.

  • Won't install drivers

    Hello, I'm not terribly great with computers so I'm sorry if this is a waste of time and it's an easy fix. I have DBAN had my laptop and then used a windows reinstall disk. I had not expected that he would destroy my network drivers. I tried to downl

  • Purple-Help error code

    Does anyone know how to fix Code Purple error? I promised to give my Compaq Presario SR 1103WM computer to my nephews. My computer worked fine. But I don't have the system recovery discs I did a F10 (the full system restore) this morning. Now, I get