I move from original 32-bit windows vista to windows 7 ultimate via microsoft's web site then a meeeage your windows copy not genune and desktop become black, what I'll do

Similar Questions

• Windows does not load and displays a black screen when it is connected to the power supply

  Original title - Windows Vista running on my laptop Sony VAIO

  Trying to turn on my laptop using the built in battery nothing happens.  When the laptop is connected to the power supply and turned on Windows does not.  It shows something in the sense that it does not properly off.  It tries to load back to a system restore point before the last stop, but seems to fail again during this process.  All that is displayed is a black screen. Currently the power on light is on, the battery light is on, but the drive activity light is off.

  Yet once again, I switched on the laptop and finally the Startup Repair process is automatically called.  After the display of the bar to attempt repairs, the system has been repaired successfully.  As a result, the I ran my Norton anti-virus, followed by Windows Updatesoftware.

• When I share HP LaserJet 4200 printer from a 64-bit Windows 7 computer and you are trying to install the driver, it says driver not found. * INI file missing

  Original title: Reader for printer HP LaserJet 4200 for Windows 7 gives problem

  My hp laserjet 4200n printer is connected to a print server of XP through the parallel port, when I share this printer from a 64-bit Windows 7 computer and you are trying to install the driver, it says driver not found. * INI file I already Miss down site fromhp driver loaded but invain.

  Please suggest

  Hi Mohammed Arif a. R,.

  You can try to plug the printer again and check the updates of Windows and see if the drivers are install.

  Install Windows updates in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  You can also view the following HP Web site and try redownloading drivers and check.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=84033&prodTypeId=18972&prodSeriesId=84028&swLang=8&TaskID=135&swEnvOID=4063

  Also check out the following link and try the suggested steps.

  Network printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Note: This article also applies to Windows 7.

  Hope this information is useful.

• Virus on Windows, does not start and he said: no operating system or it is corrupt

  Original title: help please

  I have a laptop with windows vista. Apparently, someone in the House caught a virus.  now windows will not start and he said: I have no operating system or it is corrupted. can not even boot in safe mode or anything.  says windows error recovery screen when turned on.  any help is appreciated.

  Hi Lawry206,

  You can try the following steps and check if it helps.

  Method 1: Disconnect external devices attached to the computer and restart to check the issue.

  Method 2:

  Since you are unable to start the computer in safe mode, you try to perform a repair to start the Windows recovery environment (WINRE Mode) and check if it helps to solve the problem.

  You need start from your Installion of Windows Vista disc.

  If startup repair does not help, then try a restore of the system of the WINRE Mode and check.

  You can see the following link for more information.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

• 0x800A0046 0 x 80248011 0x80072EE7 0x8024402C 0x8024502D 0x800A01AD site Web Microsoft Windows Update or connect to the Microsoft Update Web site

  • 0x800A0046 0 x 80248011 0x80072EE7 0x8024402C 0x8024502D 0x800A01AD? Regds, 'a journey of a thousand miles begins with a first step."

  Resolution for the error Code:

  0 x 80248011, 0x80072EE7, 0x8024402C, 0x8024502D, 0x800A0046, 0x800A01AD

   

  When you try to connect to the Microsoft website Windows Update or connect to the Microsoft Update Web site, you may receive one of the following error codes:

  • 0x800A0046
  • 0 x 80248011
  • 0x80072EE7
  • 0x8024402C
  • 0x8024502d
  • 0x800A01AD

  CAUSE The 0x800A0046 error code may occur if one of the following conditions is true:...

  • The 0x800A0046 error code may occur if one of the following conditions is true:
    • The logon user account belongs to the guests or limited account groups.
    • The security descriptor does not have authenticated users run Windows Update or Microsoft Update.
    • The impersonate a client after authentication policy is missing the account administrator and Service in the list of users and groups.
  • Error code 0 x 80248011 may occur when there is a problem with the database that stores Windows Update or Microsoft Update information on your computer.
  • The 0x80072EE7 error code may occur if the client computer cannot find the correct IP address when it tries to resolve a URL for the Windows Update Web site or the Microsoft Update Web site. This error can occur if the Hosts file contains a static IP address.
  • The 0x8024402C or 0x8024502D error codes typically occur because there is an incorrect character in substitution of proxy settings.
  • The 0x800A01AD error code may occur if the c:\windows\system32\wuaueng.dll file is missing or is not registered correctly.

   

  RESOLUTION

  0x800A0046 error code to resolve this error, use one of the following methods: me...

  0x800A0046 error code

  To resolve this error, use one of the following methods:

  Method 1: Remove the user account that is experiencing difficulties for customers or account groups

  1. Click Start and run, type control admintools, and then click OK.
  2. Click on computer management.
  3. Expand local users and groups.
  4. Select users.
  5. Open the account used to access Windows Update or Microsoft Update.
  6. Click on the Member tab of.
  7. Select the user account you want to remove, and then click on remove.

  Method 2: Set the security descriptor

  1. Click Start, run, type cmd, and then click OK.
  2. Type sc tisb wuauserv D: (A; CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL unit), and then press ENTER.

     You will receive a message of 'Success'

     Note the Sc.exe tool is not available in a default Windows 2000 installation. The Sc.exe tool is from the Microsoft Windows 2000 Server Resource Kit.

  3. Type Exit to close the command prompt.
  4. Try Windows Update or Microsoft Update again.

  Method 3: Add the Local Administrator and accounts Service him impersonate a client after authentication

  1. Click Start, click Run, type secpol.msc and press ENTER.
  2. Expand local policies.
  3. Click user rights assignment.
  4. Double-click to open the impersonate a client after authentication
  5. On the local security settings tab, click on add a user or group, and then add the administrator and the Service to the list of users and groups.
  6. Click OK and restart the computer.

  Method 4: Configure the remote procedure call (RPC) service to log on under a Local System account

  1. Click Start and run, type services.msc, and then click OK.
  2. Find and right-click the remote procedure call (RPC) service and then click Properties.
  3. On the connection tab, click Local System account, click on apply and then click OK.
   

  error code 0 x 80248011 before solve you this problem, clear the Microsoft Internet Explorer cache. To do this, follow these steps:

  1. In the Internet Explorer Tools menu, click Internet Options.
  2. On the general tab, click on delete files in the temporary Internet files section.
  3. Click OK, and then click OK again.

  To resolve this error, recreate the database that stores Windows Update or Microsoft Update information on your computer. To do this, follow these steps:

  1. Click Start, click Run type cmd in the Open box, and then click OK.
  2. At the command prompt, type the following command and press ENTER: net stop wuauserv
  3. At the command prompt, type the following command and press ENTER: cd /d c:\Windows\SoftwareDistribution

     Where c:\Windows is the folder where Windows is installed.

  4. At the command prompt, type the following command with the quotation marks and press ENTER: rd /S /Q DataStore
  5. At the command prompt, type the following command and press ENTER: net start wuauserv.
  6. Close the command prompt window.
   

  0x80072EE7 error code to resolve this error, examine the Hosts file. (This file can also be hosts. Sam.) Make sure that the file lists all the entries IP static for the Windows Update Web site or the Microsoft Update Web site.

  The Hosts file is located in the C:\Windows\system32\drivers\etc folder. To view the Hosts file, you may need to associate the file with Notepad. To do this, follow these steps:

  1. Right-click the Hosts file.
  2. Click Open with, and then select Notepad from the list of programs.

  If the Hosts file contains a static IP address that is associated with Windows Update or Microsoft Update, comment the entry by adding the sign # at the beginning of the entry. You can also delete the whole line and save the changes to the Hosts file.

  Note programs, such as Web accelerators, accelerators DNS, utilities of caching DNS and Spyblockers, can add static IP entries for the Windows Update Web site or the Microsoft Update Web site to your Hosts file. This scenario can cause Windows Update or Microsoft Update to fail.

   

  error codes 0x8024402C or 0x8024502d to resolve these errors, remove the characters from the list of exceptions to the proxy, and then clear the proxy cache. To do this, follow these steps:

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.
  3. Click the Connections tab, click LAN settings, and then advance.
  4. Delete any entry in the Exceptions section.
  5. Exit Internet Explorer.
  6. Click Start, run, type cmd, and then click OK.
  7. Type the following commands. Press ENTER after each command.
     • proxycfg d
     • net stop wuauserv
     • net start wuauserv

  0x800A01AD error code to resolve this error, use one of the following methods. Method 1: Register the MSXML program files to register the MSXML files, follow these steps.

  Note You may not have installed the files listed in steps 3 and 5 on your computer. If you don't have one of these files, when you try to save the file, you will receive an error message similar to the following error message:

  LoadLibrary (".dll") has failed - the specified file name could not be found.

  You can ignore this error message and continue to the next step.

  1. Click Start, click Run, type regsvr32 Msxml.dll in the Open box, and then click OK.
  2. When you receive the following message appears, click OK:
     DllRegisterServer in Msxml.dll successful.
  3. Click Start, click Run, type regsvr32 Msxml2.dll in the Open box, and then click OK.
  4. When you receive the following message appears, click OK:
     DllRegisterServer in Msxml2.dll successful.
  5. Click Start, click Run, type regsvr32 Msxml3.dll in the Open box, and then click OK.
  6. When you receive the following message appears, click OK:
     DllRegisterServer in Msxml3.dll successful.

  Method 2: Save the file c:\windows\system32\wuaueng.dll to save the c:\windows\system32\wuaueng.dll file, follow these steps:

  1. Click Start, click Run, type regsvr32 c:\windows\system32\wuaueng.dll and then click OK.
  2. When you receive the following message appears, click OK:
     DllRegisterServer in successful c:\windows\system32\wuaueng.dll.

  Kind regards
  Sohail Patel

  Regds, 'a journey of a thousand miles begins with a first step."

• I get windows did not start and each time that I reboot I get the same thing.

  * Original title: Windows7

  O my pc displays a boot device error so I put in a disk hard new1tb and reinstalled Windows 7 and install goes ok just a little slow, but after the installation is completed after the first reboot I get windows did not start and evry time I reboot I get the same thing tried several hard drives and get the same error not sure of the material cause I can load in the bios very well any help would be great

  In addition:

  Clear CMOS - 3 ways to clear the CMOS - reset the BIOS

  The setup of the BIOS or UEFI firmware, search for UEFI settings so that you can follow special steps to install UEFI below.  Also set SATA controller on AHCI, hard drive, all on first start (or if UEFI Boot Manager WIndows).

  Then just follow these steps for a clean reinstall Windows 7 making sure to remove all partitions up to unallocated space to make it cleaner.   Follow special steps if you have a UEFI BIOS, which will have a system partition EFI in Managment of disk instead of reserved system (MBR) and make sure that the SATA controller is set to AHCI.

  Other important to overcome optmizations install them hedges here to resolve the failures of Windows Installation 7

• My 8 window is not updated and updates are appearing during the verification of updates.

  Original title: updates

  my 8 window is not updated and updates are appearing during the verification of updates

  Please run the Windows Update Troubleshooter:
  http://go.Microsoft.com/?linkid=9830262

  Please provide details of any problem it reports as not fixed.

• My windows 8 not start and there is no administrator account

  My windows will not start and I can't fix with restore point or safe mode because there is no found administrator account

  Hello

  Thanks for posting your query to the Microsoft forum.

  I understand the inconvenience caused to you. I will certainly help you in this matter.

  1. You have the administrator password?
  2. Have you ever had the administrator account on this computer?

  In order to fix your computer, we should have an administrator account through which we can perform the appropriate troubleshooting.

  If you have the administrator password, boot the computer through DVD and enter safe mode with command prompt, this will require the administrator password, enter it.

  Mode safe mode with command prompt

  http://Windows.Microsoft.com/en-in/Windows-8/Windows-startup-settings-safe-mode

  If you are able to access the prompt try to activate the hidden administrator account and create a new administrator account.

  1. At the command prompt, type net user administrator / Active: Yes , then press on ENTER.
  2. Type net user administrator , then press on ENTER. Note: Please replace the tag with your passwords you want to set for the administrator account.
  3. Type exitand press enter.
  4. Restart the computer.

  Now, try to create a new Local Administrator account

  Once done, you can now disable the build-in the administrator account.

  Follow these steps:

  1. click the button Start , and then type cmd in the search box.

  2. in the list of research results, right click on cmd and then click on Run as Administrator.

  3. at the command prompt, type net user administrator / active: no and then press ENTER.

  4. type net user administrator , then press on ENTER.

  Note: restart the computer to make the changes.

  If you do not have the DVD of Windows 8.1, I suggest to download and create a bootable media and perform operations.

  Refer to this link: create installation media for Windows 8.1

  Please post back with the results and the information requested, we will be happy to help you further.

  _____________________

  Thank you best regards &,.

  Isha Soni

• I am owner of acrobat 9 pro and he had to re - download the program from a computer problem but when I get the code of the adobe Web site gives me error invalid serial code.  I use copy / paste to prevent Miss typing the code.

  I am owner of acrobat 9 pro and he had to re - download the program from a computer problem but when I get the code of the adobe Web site gives me error invalid serial code.  I use copy / paste to prevent Miss typing the code.

  Hi Laurent,.

  Please try the steps listed in the KB: https://helpx.adobe.com/creative-suite/kb/error-invalid-serial-number-acrobat.html

  Kind regards

  Rave

• The original OEM product key allows you to move from a 32-bit Vista Ultimate installation to a Vista Ultimate 64-bit installation.

  The product key OEM genuine original of my software to 32-bit with service pack 1 (that I bought and installed on my computer) allows to switch from a 32-bit Vista Ultimate installation to a 64-bit Vista Ultimate installation on the same computer without changing the motherboard?

  I would use a replacement disc from Microsoft 64-bit including Service Pack 2 as complete a reinstall? Microsoft 64-bit replacement drive has been obtained from Microsoft with the 32-bit version (which is currently installed) after some intractable problems found by the Microsoft Tech support in my OEM 32-bit software with service pack 1.

  I'll be able to do an online activation?

  Thank you.

  Hello

  You should check with Support to be sure. Normally the 32-bit and 64-bit key can
  be used on the same system. Of course, you need to install the 64 who will wipe away
  the installation of 32-bit. The key you should however work to check better
  with that which supplied the disc. The manufacturer of your system can also provide input.

  I hope this helps.

• M7-1015dx: HP m7-1015dx and 64-bit Windows will not install

  So after a unsuccessful reset, I was forced to do a thorough cleaning of my hard drive. I deleted all the partitions of the hard drive and own. My laptop came with Windows 7 Home Premium 64-bit operating system. So in good faith, I decided to stay with this OS. Everything was fine until literally the last piece before the installation is finished and I got the

  "Windows Setup could not configure Windows on hardware on this computer.

  I was confused, so I looked to the top of soemthing perhaps do not have the correct SATA drivers for 64 bit. So I downloaded the drivers, put them on a usb key, it started, started installation again and when it came time to choose where to install windows 7 I clicked on load drivers, I chose 64-bit drivers, and I had the

  "Install an unsigned 64-bit driver is not supported and can cause an unstable Windows installation"

  I looked a little more information and we are talking about setting up the SATA in the BIOS before startup drivers, towers, I don't have this option in the current BIOS of f.0Une. So, I couldn't even check if it was a viable solution.

  I ran test memeory, who runs well.

  I tried to install a windows 7 32-bit from 2 different sources, which went very well, so my copy of windows is not the problem.

  I tried to install a windows 7 64-bit from 2 different sources, that turned the same problem so its obvs a pc problem.

  I don't have a recovery disk. I wanted it to be a clean install, so I don't see why I would need one.

  I don't have the Recovery Manager as he wiped.

  Note: * I am also the windows USB boot.

  So my question is: what is the material requirement windows 7 64-bit is not when his glancing my fact for windows 64 - bit m7-1015dx?

  Hello:

  Where did you download the drivers?

  Have you tried to get out them of the driver package RST support for your laptop and driver page?

  Otherwise, I pulled the pilot from the page of your laptop support, zipped and attached under attachments below them.

  If you get this error, unfortunately then I'm stumped too.

• What type of DVD should I buy to burn my Windows Movie Maker movie? Also, I have Windows DVD Maker, but no DVD burner. What should I buy?

  I created a movie in Movie Maker.  I bought some DVD + r's - the correct burn the movie on?  Also, I don't have a burner, I thought that I did, I can only burn a CD what should I buy?  I don't have a Windows DVD authoring program.

  Hi rondah,.

  Welcome to the Microsoft community newsgroups.

  The type of recordable DVD, you need to use depends on your DVD burner, as well as on your DVD player. Some DVD burners can burn only to certain types of DVD recordable. For example, with some DVD burners, you can only record to DVD + R discs or DVD + RW or DVD-R or DVD - RW discs, while some other DVD burners will let you burn on all of these recordable DVD types.

  As long as your DVD burner supports burning to these types of discs, you can use Windows DVD creation to burn a DVD using one of the following types of recordable and re-recordable DVD media: DVD + R, DVD + RW, DVD - R, DVD - RW, and DVD - ROM. These recordable or rewritable DVDs can be either simple single laminate or single sided double layer.

  You should also consider the device you're using to play the DVD once you have engraved, if possible. Some DVD players and DVD - ROM drives play only certain types of DVD. To determine what types of DVDs your DVD player or DVD - ROM drive can play, see the documentation that came with your device or go to the manufacturer's Web site.

  For more information on which is a DVD burner and why do I need one? Visit this link: http://windows.microsoft.com/en-US/windows-vista/What-is-a-DVD-burner-and-why-do-I-need-one

  For more information on the DVD-Video burning / publish a movie in Windows Movie Maker / Windows DVD Maker

  1: burn a DVD-video disc

  2: DVD-video burning: frequently asked questions

  3: Demo: create a DVD-video disc

  4: change Windows DVD Maker DVD-Video settings

  5: solving problems with creating a DVD-video using Windows DVD creation

  6: which CD or DVD format should I use?

  7: disc burning: frequently asked questions

  8: publish a movie in Windows Movie Maker

  9: work with projects in Windows Movie Maker

  Let me know if it works. Good luck!

  Hope this information is useful.

  Thank you and best regards,

  KKS Vijay

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Program of 64-bit Windows 7 not install 32 - bit

  Original title:

  Windows 7 64 bit

  Hey everybody:

  I recently got new computer Windows 7 (64 bit) I need to install the prog. It wont let me because as TI (32-bit) prog.

  Yes I right-click, I am admin and Yes tried to install compatibility, run as.    Well can't seem to get anything to work.

  The program is very cool to replace him as (64-bit) Question is their a program that will install 32-bit?

  Thank you

  Jay

  It won't hurt to run in 32-bit mode. The software must not offer a mode 64-bit as well.

• I tried the procedure to treat the error 8007005 - I followed the steps with the subinacl. Download and return to zero from Notepad back - all pasted and copied correctly and always my windows will not update. Please tell me what to do!

  I followed the tips you posted - downloaded as it is stated and it still does not work

  Hi Dhirasantadasa,

  Thanks for posting on the Forum of answers.

  Try the location in the Microsoft Download Center and download and install it from there.

  If failure repeated, trying to get the update in Mode safe mode with network by following these steps:

  1. remove all floppy disks, CDs and DVDs from your computer and restart your computer.

  2. click on the Start button, click the arrow next to the button lock and then click restart.

  3. do one of the following:

  ·         If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  ·         If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  4. in the display Advanced Startup Options , use the arrow keys to select Safe Mode with network, press enter

  5 sign in your computer with a user account with administrator rights.

  Posted by Brian

  Please let us know if that helps.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• After back to Windows 7 from Windows 10, my Windows will not load and everything freezes in safe mode.

  Original title: backup Windows 10 for windows 7

  Hello

  can someone help me please. We have recently upgraded to Windows 10 but didn't like it. Having had the opportunity to go back to Windows 7, I did. Now Windows does not load. When I run the system repair, it works and when you scroll the dialogue it passes all the tests, but said a patch prevents starting windows.

  I tried to go into safe mode, but all crashes and I do not have a slider and it goes to a screen saver.

  I have limited computer please not too technical answers, if you want to see something then please explain to me how do.

  Best regards in anticipation.

  Valo

  Hello

  Thank you for contacting Microsoft Community

  I understand that you are facing the problem with win 10 in SafeMode as normal mode

  Please answer these questions to better understand the issue and help you:

  1. You have the disc of windows 7 installation?

  I want to suggest everything first, disconnect any external devices (Cd/DVD, USB key, webcam, memory card reader, etc.), except the mouse and keyboard and try to start.

  Now press Ctrl + Shift + ESC key combination to check if the Task Manager opens.

  If you have the Windows 7 installation disc, try to run the Startup Repair tool once more with the disc.

  If this does not help, get in safe mode with command prompt and use startup recovery tool to repair windows startup problems

  https://support.Microsoft.com/en-us/KB/927392

  Hope this helps

  Thank you

  Amplifier. Mayank Chadha