I nearly filled my HP F4580 printer cartridges, but the printer thinks they are empty.
I nearly filled my HP F4580 printer cartridges, but the printer think they are empty, so I can't print.
If I reinstall the cartridges, I change the printer says the ink level, but this went after printing 1 page. Y at - it a simple sollution for this problem?
Tags: HP Printers
Similar Questions
-
Whenever my on my dell printer black ink cartridge runs out, I'm generally left with a color cartridge, which is a total waste of money, because they are purchased together in a common case; is it possible that I can tell my printer to switch to the color cartridge and use that one until 'she' runs?
I did a search for authentic cartridges, not refurbished which are cheaper, but not as reliable and these are just a few options, I found. Check the cartridge number I've seen series 2 and no 5. But whatever it is, they are there. -
I have a HP Envy 110 series printers and I tried several times to reprint documents m in different qualities and align the cartridges, but the lines of words have dragged through them and are not clear. Much of the document is blurry and cut through. Any suggestions?
Read this article, he describes some steps on how to use the printer utility that came with the printer to run a few steps that might improve the print quality, including cleaning the print cartridge and other procedures.
-
Why are publish you again? You must first answer the question I ask in your original thread.
-
Presets of printing - where they are stored?
Where does Acrobat store the print preset page sizes?
Probably stored by Windows in the print subsystem. It will be in the registry, but the keys will be different on different systems. So really awkward and changing the registry is manually not just things, managed by the print subsystem.
-
Hello
I have problems trying to save my edited images are sized at 30 MB + in jpeg format to the same size that is needed for my print lab. For some reason, it resizes them to below 5MB. Can anyone help? Thank you in advance.
You're confused image with dimensions in pixels size.
There is no problem as long as you has not changed the dimensions/resizing the image when you saved as jpg.
Check the dimensions in pixels of the original and the jpg - they should be the same.
To put it otherwise - size of the image in megabytes are not an indicator of the size of an image (the size it will print). Dimensions in pixels are.
-
I have a new color cartridge, but the printer will only print b/w
Original title: printer
My color cartridge was low so I replaced my color cartridge. Although even I have a new color cartridge in my printer does not print in color.
Hi Paulawagner,
· What operating system is installed on your computer?
· What is the brand and model of the printer?
· Did you do changes on the computer before the show?
Please answer the following questions so that we offer in addition to the steps to solve the problem of troubleshooting.
First of all, make sure that the color cartridge/toner is not empty or blocked.
You may have accidentally changed the print options that caused the problem.
Check out the following articles for more information about changing the printing options, printing a photo, etc.:
Print a photo
http://Windows.Microsoft.com/en-us/Windows7/print-a-picture
Choose printing options
http://Windows.Microsoft.com/en-us/Windows7/choosing-print-options
I hope this helps.
-
I have a color laserjet CP1215 printer. I set the printer to print only black and white and it prints only black and white. Then why my cartridges color short ink? Thank you
Hello
Thanks for the post. I have attached a document below may have useful information regarding about printing with your CP 1215. Good luck!
-
I have a HP Deskjet 3050 a - J611j all-in-one printer. I use Mac OS 10.7 Lion. I replaced the empty ink cartridges. Now it shows the color cartridge is full, but still shows black cartridge empty. Is it possible to reset it?
Hi Shanmarie1103,
If the cartridges are rebuilt you will not get a read out on the ink levels. You will need to use a new OEM cartridge with a new chip for the ink levels. Click on the links below for more information.
-
printer-i just change the ink cartridge, but the light is always hide
I just changed the ink in my printer cartridge, the light which shows needs to be changed is still. Can someone help me, please?
Contact the manufacturer of your printer. It is a hardware problem that neither Microsoft nor Windows caused or can solve.
-
No product serial [under the direction of privacy] # CV078A
Setup of cartridges ran out of ink. Bought a combo pack and replaced all of them at once. Regularly we would get a message that one or more cartridges have been damaged. It would remove the one at once and reinstall and it works again for a while, then the message would get back to the top. After several types of this problem we started to replace each cartridge one at a time to try to isolate the damaged cartridge. No luck. Now we have two complete sets of ink cartridges and it still gives the message that a cartridge is damaged. New message today is that transport of ink can not move and we should remove the obstruction and try again. There is no obstruction. When we close the door to the box the cartridge carriage move and made a loud BANG. Looks like it moves to the left. Then it will pass through its preparation and the message arrives that the one or more ink cartridges are damaged. UGH!
Since your printer is under warranty I think contact you HP. The coding Strip is fragile and it would be better to replace professionally if it was an option.
-
Inserted new HP cartridges but the 'Supply levels' tab only shows 50% full?
I use the series HP Deskjet 1050 J410. I nserted the new HP cartridges however "Levels of power" tab only shows 50% full in the user interface. The only reason thati I checked it's so short time because I printed a few pages only black and white, and the setting icon with the "!" pop up. These cartridges are defective?
Hi lalagirl
Try to reset the printer...
- Press the power button ( ) to activate the product.
-
Print size when you print emails they are sized very large police how to fix?
I just bought a printer model 5530 all in one.
I went to print E-Mail and printed police so large that it covered the entire page. I would like to know how to solve the problem?Hello
You can adjust the sizes of fonts to the application (e-mail). What is your email client/agent? What is webmail? If so, which browser do you use?
Kind regards.
-
all of a sudden not printed when they are asked to
I checked the connections. Printer produces sounds when I try to print from the computer, but does not print. The elements will continue to accumulate in the queue (which I just discovered how to cancel). Is there a place I should go in my computer?
I checked the connections. Printer produces sounds when I try to print from the computer, but does not print. The elements will continue to accumulate in the queue (which I just discovered how to cancel). Is there a place I should go in my computer?
Katherine, this could work, it did for me. But whatever it is, it won't hurt to try.
First, shut down your computer. Then unplug the wire from the back of your printer that goes to your computer. Wait 20 seconds, reconnect the wire to your printer and then restart your computer. Cross your fingers and try your printer.
If this doesn't resolve the problem, try to uninstall and then reinstall the printer software.
If all goes well, one of these remedies will solve your printer problem.
-
The question is always the same. If the printer is equipped with WiFi, it's why he recognizes computers without any additional equipment? Please give me a hand with this problem. I don't have a disk for the printer, but my past experience hoof of the CD/DVD simply mind. HP is good for putting a lot of their sales on their disc material. This computer is a SilverStone (Alienware), Windows 7 Ultimate, the laptop is a HP G61 - 429, also 7 Ultimate and the third is a Compaq (HP), however, it is in the shop for an upgrade. Thank you!!!
Brother support has a configuration wizard for the HL-4070CDW wireless that should help. Here is a link to the first page of the wizard step by step: http://www.brother-usa.com/support/wireless/Step1.aspx?ProductID=HL-4070CDW&R3ID=HL4070CDW#.UCrSvKPo6Sp
Maybe you are looking for
-
Hearing of MFI-help - cancelled
I had to resound hearing aids Linx, but not more (1 year +). Echo deleted app. However such aid always appear under settings/accessibility/hearing aids - list of devices (such as the pair) and seems as if IOS is still "looking" for them. How to untie
-
How can I send a HTTP request to a web server using TCP?
I'm writing a HTTP string to activate a script CGI, server of our company. It seems that the OPEN TCP CONNECTION works. Can I just use the TCP WRITE function to send the HTTP request string to the server?Thank youTim
-
Impossible to spend navida - Navida n force network error code from the controller 800701103
I can't upgrade the strength n navida 800701103 networking controller code, I tried to install it several times but it continues to come, I don't know why it won't let me install, I never ran this problem before, I don't know how to solve this proble
-
How can I get rid of the screen of "Found New Hardware Wizzard: device modem on high definition audio bus" that kept appearing on my screen each time after I log on my computer? Thank you.
-
Pavilion G6: Reset password for BIOS Pavillion G6
can any mine assistance arrives with system off Code: 71443134