I ned to know how to get this drive that will not eject. I have an emachine

How to get out

Hello

1. what operating system do you use?

2 did you change on your computer?

3. are you able to eject the disc using the Eject from Windows Explorer?

4. are - that you talk to a CD/DVD or external hard drive?

Method 1:

I also suggest that you shut down the computer before it performs the operation ejection by a trombone.
I suggest you follow the step how to eject the disc and check.
(a) locate the optical drive that contains your stuck drive. You will see a small hole on or immediately below the disc tray.
(b) straighten the paper clip.
(c) Insert the right end of the paperclip into the hole and push. You should snap inside the locking mechanism.
(d) gently pull the paperclip. The disc tray will come with it.
(e) remove the CD / DVD and close the drawer.

Method 2:

I also suggest you to control in safe mode and run clean boot.

Advanced, including safe mode startup options

http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

http://support.Microsoft.com/kb/929135

Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

Tags: Windows

Similar Questions

  • Hi all, I am wanting to know how to solve this problem, I will have with my creative cloud downloads. I am trying to cancel the application Adobe DC and it download it again. But it's frozen on the "cancellation of...» "and don't move. I can't redownload

    Hi all, I am wanting to know how to solve this problem, I will have with my creative cloud downloads. I am trying to cancel the application Adobe Acrobat DC and it download it again. But it's frozen on the "cancellation of...» "and don't move. I use a mac, I can't redownload until it is gone from the top of the cloud. Can someone tell me if this has happened to them before and what I can do to remove it so I can redownload. Ive put a picture below so that you can understand what I mean.

    Screen Shot 2016-01-22 at 11.30.25 pm.png

    Hello

    Click the "Finder" on your dock to Open a Finder window. Click on 'Applications' in the side bar of the Finder window to see your Mac applications. In this folder, double-click the folder "utilities". Double-click the "Activity Monitor" icon to access the application.

    Now exit Adobe all associates of process as creative cloud, CC, CCX, Core sync, broker CIB Adobe and then launch creative cloud app again and try to download Acrobat.

  • I can ' t see my product in my account, I have an account, but my products are not displayed. " I bought a new computer and you want dreamweaver intsaller it too, and photoshop, but I don't really know how to do this if Adobe does not know that I am a Mem

    I can ' t see my product in my account, I have an account, but my products are not displayed. " I bought a new computer and you want dreamweaver intsaller it too, and photoshop, but I don't really know how to do this if Adobe does not know that I am a Member

    Please make sure that you are connected with the correct e-mail address.

    Let us know the version of the product, you want to install.

    Let us know the operating system as well.

    Concerning

    Megha Rawat

  • How can I empty trash that will not empty

    How can I empty trash that will not empty?

    I tried the site but it does not

    Try to restart and then try to empty the trash.

    Kim

  • Is there a way to re set Lightroom to the original settings, I've been playing with it and got somewhere that I don't know how to get out of... not particularly computer savvu

    Is there a way to re set Lightroom to the original settings, I was playing with it and has gotten, somewhere, I don't know how to get out of. Not very computer savvy

    For starters, stop Lightroom

    On Windows, do the following

    Click the Windows Start button and in the search box type: -.

    %AppData%\adobe\lightroom

    Then press Return\Enter

    This will take you to the folder Lightroom (see image below)

    Select the Preferences folder and click on delete to send it to the Recycle Bin.

    Close the Lightroom folder, and re-start the Lightroom program.

  • How can I delete files that will not be clear without "permission"?

    I have a BACKUP folder on my drive C dating back to 2005, and who comes from another computer (XP). The record contains three, which in turn have subfolders and files. Security of the backup folder hidden controls on all ALLOW bos (inherited from the C drive) and so do its subfolders, but the lowest-level files do not have boxes to ALLOW or REMOVE permissions and add & DELETE buttons are shaded on (inioperable).

    I read the information displayed under «I need permission for everything and don't know how to get it...» "dating from fevrier.09 onward and apparently their solution (and probably mine) is not yet available.  I am a Vista Home Premium 32-bit user and agree with comment abouit Vista of those displaying the site in question.

    I add my question in the hope that someone, somewhere will respond with something that works for this problem.

    Hi delrayjack,

    Thank you for writing to Microsoft answers Community Forums.

    Have you tried other methods to delete folders? You can try to give permissions to the entire folder. However first to disable the user first, and then access control give permission.

    To give permissions to try the procedure below

    1. right click on the file (Context menu is displayed.)

    2. Select 'Properties' ("[name of folder] properties" dialog box appears.)

    3. click on the security"" tab.

    4. click on the 'Advanced' button (advanced security settings for [name of folder] appears.)

    5. click on the tab "owner".

    6. click on the button "Edit".

    7. click on the name of the new owner in box "a change in ownership to.

    8. click on the box to check "Replace owner of subcontainers and objects".

    9. click on the apply"" button. ("Evolution of the property of...") ("progress message appears.)

    10. click on 'Yes' to acknowledge the warning "Windows Security".

    11. click on OK to close the "Advanced security settings" dialog box to the foreground.

    12. click on 'Permissions' tab (first tab) on the dialog box "Advanced security settings" current.

    13. click on the button "Edit".

    14. Click to select the administrator in the box "permission entries.

    15 NOTE: If 'Administrator' appears more than once, select one that has 'Subfolders and files only' in the column ' applies to.

    16. click on the button to change. ("Permission to [folder name] entry" dialog box appears.)

    17 click to see the option "apply these permissions to objects...". ».

    18 click to check ALL the boxes in the column "allow".

    19. click 'OK' (dialog box closed, return to the "Advanced security settings" dialog box.)

    20 click to see the option 'include permissions inheritable... '. ».

    21 click to see the option "replace all existing inheritable permissions...". ».

    22. click on the apply"" button. (Confirmation dialog "Windows security" is displayed.)

    23 click on 'Yes' to confirm that you want to continue.

    24 watch progress indicator on the "Windows security: definition of security... information. "dialog box.

    25. when information security has been applied, the indicator dialog box will automatically close progress.

    26. you are now in the dialog box "Advanced security settings for [name of folder]"... the "Permissions" tab should be visible.

    27. click on 'OK' and the dialog box closes, revealing the previous dialog box.

    28 click on 'OK' and the dialog box closes, revealing the "Properties" dialog box

    29. click on 'OK' and the 'Properties' dialog box farm

    30 return to Windows Explorer and delete the folder.

    You can also try to remove it from the command prompt and check

    1. disable user account control

    Delete the file

    Tun back user account control on

    2. start | type Cmd.exe | Right click on cmd.exe in the list of programs directly above. Select run as administrator

    Navigate to the directory that contains the file that you want to remove (using the CD command).

    Delete the file using the DEL command.

    Use the EXIT command to close the command window

    Another way to delete the folders is the mode of WinRe.

    -To start the computer into WinRE mode, insert the Vista CD in the CD tray, restart the computer.

    -When you are prompted to "press any key to boot from the CD-ROM..." Press ENTER.

    -Select the language by default, click Next.

    -Select "repair your computer".

    -Select command prompt and type the commands to delete the file or Notepad type, which will open Notepad, and then click file > select open and from there, navigate to the location of the files and try to delete

    I hope this helps. .

    Let us know if this doesn't work or if you need further assistance.

    Kind regards

    Sharath

    Microsoft Answers Support Engineer

  • How do I empty this trash that will not empty!

    It was not possible to well to empty my trash. I have tried for the day and tired of all this that I'm sure... but no way! will not empty my trash... I even used the terminal / sudo command but could not type my password! It was not type-able! So I made the last option I had left... I downloaded Trashit! CNET and it worked! my trash is now empty!


    "Now" my QUESTION is: "was it safe and secure to empty my trash with the free software Trashit? Was it a wise action and my basket is empty? I hope to have a response because so far, this community has almost no solutions that I found so far

    rehillar wrote:

    It was not possible to well to empty my trash. I have tried for the day and tired of all this that I'm sure... but no way! will not empty my trash... I even used the terminal / sudo command but could not type my password! It was not type-able! So I made the last option I had left... I downloaded Trashit! CNET and it worked! my trash is now empty!


    "Now" my QUESTION is: "was it safe and secure to empty my trash with the free software Trashit? Was it a wise action and my basket is empty? I hope to have a response because so far, this community has almost no solutions that I found so far

    I can't answer, but the reason why Apple removed the ability of many empty trash is that it does not work with modern and SSD; There is no way to guarantee you're replaces any element as data locations are moved dynamically. Because it is impossible to well to empty the trash that apple decides to not fall asleep in a false sense of security.

  • How to uninstall printer driver that is not installed on the computer

    Original title: my "unknown device" is a printer I own is no longer!

    To solve the problem "code 28", I have to re - install the driver for HP OfficeJet Pro 8500 - but the printer is no longer installed, and in fact I is even more has the printer.  The HP printer appears on the screen "devices and printers", but when I click on the yellow triangle on my laptop device, it brings me to the unidentified printer and the hardware - MF\Officejet_Pro_8500_A910 & WSD & IP_PRINT ID.  How can I uninstall a printer that is not installed, or how can I update the driver on a printer that is not installed.

    Thanks for reminding me about MalwareBytes and SuperAntiSpyware.  I used MalwareBytes a few years ago to kill a particularly tenacious virus that prevented me from my virus program execution.  I ran the two--identified only 4 files MalwareBytes and removed and SuperAntiSpyware found 286 tracking cookies - I zapped them.

    Now, the best news of all...

    Child of a friend's House of the college - he won grants and national contest for his expertise in computers/software diagnosis and repairs as a sophomore in high school.  He stopped on the way back to decipher problems with computers on the local school district and spent every three minutes solving my problem.  I don't really know what he was doing - he did so quickly - but he said to send you the link and you will understand it better than I could explain it.

    http://www.howtogeek.com/HOWTO/Windows-Vista/remove-old-drivers-after-upgrading-to-new-hardware/

    The yellow warning triangle disappeared, and the unidentified printer is no longer there.

    I want to thank all those who contributed to this thread - your persistence and patience has been remarkable.  I learned a lot from the experience even if I was not able to completely solve the problem.  I congratulate you all.

  • How to remove an update that will not download

    Every night my computer tries to download KB3097966 and fails. I discovered that the error code 80070490 is involved. Can someone advise please how can I fix this or how to remove this download from my system

    Hi Bruce,.

    Thanks for posting your query on the Microsoft Community.

    According to the description you posted in your message seems that you can not install updates, this problem may occur if one or more of the following conditions are met:

    1. The Windows Update database is damaged.
    2. Antivirus software is configured to scan the folder % Windir%\SoftwareDistribution.
    3. Service (BITS) Background Intelligent Transfer Service does not receive a content link header.
    4. A required system file is incorrectly registered.

    If it helps, try the methods and check them off below.

    Method 1

    I suggest to run the troubleshooter and see if that helps.

    Open the Windows Update troubleshooting tool

    http://Windows.Microsoft.com/en-in/Windows7/open-the-Windows-Update-Troubleshooter

    Method 2

    Step 1

    If the problem persists I suggest to reset the Windows Update components and for this, try to run the fixit described in the following article. If you already tried the fixit even before that I ask of you rerun the fixit.

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058/en-us#LetMeFixItMyselfAlways

    Step 2

    Try to follow the steps in the Microsoft Article and check if it helps.

    Problems with installing updates

    http://Windows.Microsoft.com/en-us/Windows/troubleshoot-problems-installing-updates#1TC=Windows-7

    Method 3

    If after completing the two steps issue persists trying to follow the steps described in the following Microsoft article different methods.

    Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

    http://support.Microsoft.com/kb/2509997

    Registry warning : This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    You can use the following link to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756/

    Important:

    Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

    I hope this helps. If the problem still persists, post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

    Kind regards

  • I downloaded a music software and then deleted. It has changed my title of the home page and I can't change back to Firefox. I don't know how to change this, but it does not work. Can you help me?

    Music software is imesh and I changed my title of the homepage with Firefox, in my internet options for Windows. Whenever I close the page, the home page changes back to the imesh search page. I deleted my computer including imesh go to windows Explorer and remove imesh all that I can find nothing will do.

    Steps to remove iMesh as your home page:

    1. In the address bar, type Subject: config and press ENTER.
    2. In the filter at the top text box, type: keyword. URL
    3. You will be presented with the entry for the keyword. URL
    4. Double-click it, delete the channel and press OK.
    5. Release of Firefox.

    Then, you must assign the desired as your homepage site. Open Firefox and follow the instructions provided in this article: How to set the home page.

  • I paid and downloaded pro adobe acrobat but it turns out that its an upgrade, so I'm stuck. I need help to know how to get the program that I really need.

    Very frustrated, I can't speak to someone for this sort. Any help would be very appropriate.

    We were given the link of our designers and it's just an upgrade and when I came to install it request the previous version serial No.. We have not all previous versions, we cannot go past this stage.

    Is there a contact center that I can talk to?

    Thank you

    Amanda

    Hi Sally,

    I recommend you contact customer service regarding this issue.

    Kind regards

    Rahul Tyagi

  • How to install a driver that does not contain digital signature information in Windows 8?

    It displays a message indicating "the third-party INF does not contain digital signature information.

    Disable the check.

    Hold down the SHIFT key while clicking on restart
    Select help > Advanced Options > start settings > restart
    After reboot select option 7.
  • How to get this effect?

    Hey guys, new user first here sorry in advance if this is a stupid question. Does anyone know how to get the effect that appears around: 14 in the next video? Where the waves fill the outline of the girl, but not big thing.

    Escape to exist • white s/s 16 on Vimeo

    Background scene on track V1

    Contrast shot of the girl on the floor V3

    Coup waves on track V2 with effect hides by applied approach, effect hiding approach specifying track V3 as source material Composite using Matte Luma, you will need to check the box to reverse the effect if it is darker as the background,

    MtD

  • How create/get ColorPal driver for LabVIEW?

    Hello!

    I am a french student in England and I'm working on the Starter Kit 2.0 (with DaNI Robot). My company wants to turn the feature of prevention of obstacle (thanks to the ultrasonic sensor) into a follower of colored (thanks to the Parallax ColorPal) line. So I want to program in LabVIEW but I don't really know how to get the driver ColorPal or screws to connect between the sbRIO 9632 and this color sensor. I use the same yarn as the ultrasonic sensor to connect the ColorPal.

    Thanks in advance for your help.

    Concerning

    Kevin

    Hey Kevin,

    I took a glance at the ColorPal documentation and it seems that it is programmed using e/s series. As you can see below:

    You will need to do, is use series found below the palette of e/s of instrument LabVIEW VISA and functions to communicate with your ColorPal. I recommend that you download their website ColorPal documentation and study the syntax of the commands that you will need.

    Also for reference here is a good place to start when programming of VISA.

    Kind regards

  • I try to get Firefox to open Vuze when I click on a magnet link, I get the following message: Firefox doesn't know how to open this address, because the Protocol (loving) is not associated with any program. tell me the solution

    When I try to open a torrent using magnet, I get the following message. Firefox doesn't know how to open this address because the Protocol (loving) is not binding to any program.

    I had this problem and just reinstalled Firefox. Problem solved. In my case, I believe that it is through the installation of FlashGet. Although I uninstalled FlashGet, it had outstripped the Magnet links / Protocol. I hope this helps you with your instance. Fortunately, I had Setup for my version of Firefox (7.0.1) registered and used that but you might need to search for your current version or install a later version

Maybe you are looking for