I need a driver, and the Toolbox for Canon i-sensys MF 4450 printer.

Similar Questions

• How to add an optical drive and the bezel for Acer Aspire V3-572-5217

  I think to buy the V3 Aspire 572 5217 and I would like to know the process of adding an optical drive. I did some looking and well enough to assume that the majority is universal. I would like to know if the product comes with a scope or if I have to buy a. If Yes, what measures do do so that the right settings?

  Thanks for any advice.

  Hello Brian,.

  For uphill on Aspire V3-572-5217, need you the following:

  42.ML9N2.001 - ODD BEZEL

  33.ML9N2.003 - ODD SUPPORT

  Ko.0080D.014 - DVD RW 8 X SUPER-MULTI 9,0 MM TRAY GUA0N HLDS LF + HF without BEZEL M-SATA DRIVE

  (Hitachi LG data storage)

  KO.00807.016 - DVD RW 8 X SATA M-DISC 9,0 MM TRAY SUPER MULTI DRIVE UJ8E2QBAA2-B PANASONIC

  LF + HF without the PANEL (UJ-8E2)

  You can ask for quote and order these parts in your Acer store.

• Satellite Pro A120: Need all drivers and the easyguard for Win 7

  Hello!

  I have a Toshiba Satellite Pro A120, that I bought in 2007 and I am very satisfied.
  It had Windows Vista professional, but I have recently installed Windows 7 and it is where my dilemmas has started.

  My touchpad is not working properly, its scrolling feature works, to be specified. I installed the latest driver for ALPS touch pad, but the problem remains.

  Then, when I checked the system, I noticed two devices listed and it says that there are no drivers installed for them. I can't know what devices are and where to find the drivers.
  They are here:
  1st: ACPI\TOS6208\2 & DABA3FF & 1 driver not installed!
  2nd: ACPI\TOS620A\2 & DABA3FF & 1 driver not installed!

  And my third problem is about the sets of Toshiba programs and public services.
  My laptop came with Toshiba Easyguard, with protection against theft and other programs of Toshiba, and now I've lost all. Is there a way I can get them?

  I must say that I have no intention to return in Windows Vista, if any help would be appreciated.

  Thank you all for your responses and help!

  Hello

  In my IMHO the additional features of touchpad and other devices don't work correctly because the installed drivers are not designed for Win 7 and are perhaps not fully compatible with Win 7.

  Who knows if drivers Win 7 would come out for series Sat A120 we will see
  At that time I didn t find Win 7 drivers specific for A120.

  But if there are some beta Windows 7 drivers on the US page:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Maybe you are lucky and some drivers running on your A120.

• I need help to download the software for canon MF4430

  I have this printer but you do not have the software/readers. I was finding difficult to download on window 7.

  the printer is Canon MF4430

  I'd appreciate your help.

  See you soon.

  Get the drivers from here...

  http://www.Canon-Europe.com/support/Consumer_Products/products/Fax__Multifunctionals/laser/LaserBase_MF_series/i-SENSYS_MF4430.aspx?type=download&page=1

• I need to reinstall my CS6 on my PC.  I installed it on this computer for 2 years now, but anyway half of subsequently moved to one of my hard drives and the other half is on the other.  I be sure to consider both drives off the coast and reinstall on the

  I need to reinstall my CS6 on my PC.  I installed it on this computer for 2 years now, but anyway half of subsequently moved to one of my hard drives and the other half is on the other.  I'm sure to remove both drives and reinstall on the larger hard drive?  I am a student and single MOM, and I can't afford the monthly subscription for the CC7.  If it does not somehow, I'll miss my classes.

  If the largest is the primary drive then it is safer than any other installation option, but all uninstall/reinstall can present problems.  If the software currently works very well, I would say that leave well enough alone if your future depends on software work.  Before you delete anything, remember to disable by opening an application and by choosing Help-> Deactivate.

• Partitioning hard drive, I want to spend 30/40 GB drive and the remaining space for the creation of other partitions.

  I created a recovery disc for my system that I bought the new laptop.
  It consist of 500 GB HARD drive, now the problem is the C - drive which is my WIN7 Home Basic installed occupies 400 GB of space and the D-drive has only 25 GB.
  My problem is I want to partition the drive C so that the other player must occupy the space according to my condition.
  But here its only gives me half the space to shrink.
  I mean, when I opened diskmgmt to shrink, C this is 200 GB disk space allotted to me.
  Medium I can use this space to create other partitions, but what I want is, I want to spend 30/40 GB C drive and the remaining space for the creation of other partitions.
  Help, please... Thnks...

  That's what we tried to tell you. An OEM installation does not lend itself to change and having to clear guarantees for re-setup means that you must be quite certain that you have other reliable ways to re-setup.

  If you want to dabble with Linux or dual boot, you should buy a complete commercial edition of Windows 7 that will give you more flexibility and accept that for drivers etc, you're on your own...

• Hi Folks, I'm ready to go with the versions of CC of LR and Psalm I currently use Apple products and the iCloud for storing photos, they stay on the iCloud or do they need to go to a related version CC?  Also, I guess that versions CC of LR

  Hi Folks, I'm ready to go with the versions of CC of LR and Psalm I currently use Apple products and the iCloud for storing photos, they stay on the iCloud or do they need to go to a related version CC?  Also, I guess versions CC of LR are Mac compatible.  Can they go on several devices, the cloud itself, including mobile devices like the iPad?  Thanks a lot in advance, Dave.

  You can have your photos on iCloud without any problem.  Lightroom CC 2015 is compatible with mac, please check system requirements of Lightroom CC 2015. You can install Creative Cloud on 2 machines, however, you can't use both the at the same time, the control 1:1 point: http://wwwimages.adobe.com/content/dam/Adobe/en/legal/servicetou/Software_Terms-en_US-2015 0407_2200.pdf

  You can use Lightroom for mobile or your ipad and iPhone. Please check Adobe Lightroom for mobile FAQ

  I hope this helps.

• Windows 8: need for Canon Laser Shot LBP-1120 printer driver

  I turned on my printer, the other day for the first time since the installation of Windows 8, and nothing happened.

  XP drivers I used do not work, or no Vista I found drivers.

  Does anyone has experience of this printer with Windows 8, or may suggest a compatible driver please?

  For the record:
  I did it. In fact, it is possible to connect a lasershot 1120 Windows 7 x 64 machine.
  This should work for win8, don't test that but this guide could still be useful. Not for the faint of heart, however, you must be comfortable with your operating system.
  Here goes:
  You need virtual machines for this race of win xp.
  Download the integration for the printer modules.
  the usb section it should list as shared. Change the connect, disable it in Windows 7.
  Install the drivers for Windows XP in the VM through devices > new printer. Those of your original download copy on the virtual disk before their execution. Note that the winspool service crashes. Restart services whenever he does. Check the usb device back to shared. Reconnection in case of failure. To do this, it seems a lot. There is a known bug in the canon CAPT pilot to crash the spooler by the UMBus enumerator service. Because of the virtual machine, you can not fix this. I'm sorry.
  Make sure to get the solution of prevention dep canon and install it as well. It's an exe located on the site of canon driver. Only, it'll work when or is in place. At this point, I have made a link to the desktop for system services. To save you the trouble to go to the config.
  When everything is installed, you must stop and restart.
  With the printer connected and good start win XP virtual.
  Spooler crash, nevermind. Go to start > programs > startup and delete the canon statusthingy.
  change the settings for usb devices connected.
  Check printing devices, it should show the lbp1120. The opening he does fail, no spooler.
  restart the or an once more.
  Check once again, opening the printer lbp must now produce the windows printer box with its 'ready' status Note that the canon tray printerthingy report normally used, but you should now be able to print things to him.

  Note: it took me a long time, juggle with win xp, or restarts, reinstall the drivers, etc...
  You must be determined enough to make it work as the virtual machine is slow, restaring it takes forever and the final result is still imperfect, you have to do the whole routine restart or after the virtual Windows XP startup whenever you need.

  Now, once you've got liftoff is the printing process:

  -connect the printer
  -Start win XP virtual machine
  -USB > camera Canon CAPS > connect
  -Restart the printer spooler in: Config > System Management > System Services > or > start
  -Open the document and print it

  Complicated way to do it, but I use this printer for manufacturing toner-transfer method custom circuits and this way I don't have to put my designs on USB and start ye olde win XP on another pc.
  Still I had some good fun breaking the problem :-)

• URGENT! need help DRIVER HP Pavilion P6230L for Windows XP Pro

  Dear helpdesk,

  URGENT! need help DRIVER HP Pavilion P6230L for Windows XP Pro...

  Send me the link for the driver or compatible.

  or email to: [email removed for privacy]

  Kind regards

  MRZ

  Message edited by SandyD on 25/11/2009 14:01

  Thank you

  but I can't download link for LAN

  FTP://ftp.HP.com/pub/softlib/software10/COL30407/PV-75371-1/sp44423.exe is not available.

  and I need driver motherboard chipset

  Help me.

  MRZ

• Install the new SATA drive and the primary drive Clone which he

  After reading many messages from hard drive yesterday and the manual for my Dimension 4600, I bought a Western Digital 250 GB SATA internal drive which will become the secondary drive through Dell. My first is a 40 GB with 14 GB of free space. I am a student of site design Web and must use Adobe Creative Suite CS3, including PhotoShop, Dreamweaver, etc., which is a huge program. Technology Department told me that I could load the program Adobe Creative Suite CS3 on the new secondary drive and my images and other Documents which I will use to create Web sites for school. I could load MicroSoft Office 2007 as well if it is a good idea.

  What is a reasonable secondary use of a hard drive?  Is this a good practice? Benefits; Disadvantages?

  If the primary drive fails in the future, it is possible to just load Windows XP, etc on the new secondary disk at this time and the report on? Or I need to remove Adobe Creative Suite, MicroSoft Office, my pictures, etc., before I could load the operating system? I have a 60 GB external USB drive for backup of Documents and Settings.

  Dell Dimension 4600 (Pentium 4 CPU 2 .8GHz, memory 3 GB RAM) running MS Windows Home XP, SP 3.

  Any other good suggestions for the use of a Seconday drive in my case?

  Message edited by Tennis_8 on 05/21/2008 09:53
  
  

• My hard drive and the Extras have plenty of space. Yet several times each and every day, I'm getting flashed "virtual memory minimum insufficient..." Virtual memory pagefile... "Any joy? Please help if you can. Thank you. Cecilia.

  Question

  I have another type of problem with Firefox

  Description

  My hard drive and the Extras have plenty of space. Yet several times each and every day, I'm getting flashed "virtual memory minimum insufficient..." Virtual memory pagefile... "Any joy? Please help if you can. Thank you. Cecilia.

  This has happened

  Each time Firefox opened

  Only a few weeks ago, (tried everything)

  Troubleshooting information

  ?

  Version of Firefox

  3.6.3

  Operating system

  Windows XP

  User Agent

  Mozilla/5.0 (Windows; U; Windows NT 5.1; en - us; RV:1.9.2.3) Gecko/20100401 Firefox/3.6.3 (.NET CLR 3.5.30729)

  Plugins installed

  • -Adobe PDF plugin for Firefox and Netscape
  • Default plugin
  • Shockwave Flash 10.0 r45
  • Windows Presentation Foundation (WPF) plugin for Mozilla browsers
  • Java plug-in 1.6.0_07 for Netscape Navigator (DLL Helper)
  • Npdsplay dll
  • DRM Netscape Plugin store
  • DRM Netscape Object network

  Read about virtual memory here: http://www.ehow.com/windows-xp-virtual-memory/

• Pavilion dv6600ev: I would like to replace the HARD drive and the RAM in my HP laptop. I want to check compatibility

  Hello guys. I would like to replace the HARD drive and the RAM in my HP laptop. I would check the compatibility. For the momemt, I have 2 x 512 MB of RAM and a 160 GB HARD drive. Does anyone know the type of RAM (DDR1 or DDR2 most) and the accepted maximum capacity. Also the SATA port is a SATA I? Besides, I'm going to change the operating system (preferably in Win 7) so is there a driver?

  You can install DDR2-800 modules and they are the most widely available at this point, but the memory will run at 667 mhz speed.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• I need video driver and audio presario sr1403wm

  I need video driver and audio presario sr1403wm

  Marfisi, welcome to the forum.

  I suggest to update XP to SP3.  Then, go to the Web to Realtek website and download the latest driver AC 97.  This will update the audio and video.

  If your problem is solved, please click "accept as a Solution.

• Parts of our software will disappear and then when it is closed, we get the usual "software encounterd a problem and needs to close" and the faulitng module error

  original title: problem with shdocvw.dll

  Hey guys just a quick question.

  bascailly, I'm working on the first line of support for a company and we have created a software for the United Kingdom NHS, basically our software is used by doctor general practitioner through the United Kingdom to read documents electronically.

  a question we seem to become much lately is certain parts of our software will disappear and then when it is closed, we get the usual "software encounterd a problem and needs to close" and the module faulitng error. When event viewer is selected the below appears.

  Failing application dme7_client.exe, version 7.1.0.270, failing module shdocvw.dll, version 6.0.2900.6212, address 0x000b26fe failure

  It seems that the only way to solve this problem is the newspaper on a differnet and use them as seems to be the specific user. does anyone have any ideas of what we can try to solve this problem without obiously the user with a different account?

  see you soon

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. Appropriate in the MSDN forums. Please post your question in the MSDN forums.

  You can follow the link below to ask your question:
  http://social.msdn.Microsoft.com/forums/en-us/categories

  I hope that helps!

• How can I connect Windows XP to several networks, Wi - Fi for internet and the other for file sharing?

  On windows XP, I need to connect to two different networks. Free wifi for the internet and the other for file sharing.

  Different gateways, different static address, same subnet mask. But there is problem when operating simultaneously and must

  a network must be disabled. Is it possible to run simultaneously?

  original title: served various networks simultaneously on windows xp

  Go to where you have configured the static IP addresses for your network adapters.  Leave the "default gateway" blank for your local file sharing adapter and insert a valid default gateway for your wifi Internet adapter.  Of course, this will limit your adapter in a single subnet - which should be OK for use at home or small office to share local files.

  This should work as long as the two physical subnets have two different subnet numbers. In general, this means that the first three digits of the IP address of the adapter can not be the same on both adapters - if they are, then you need to make one of the subnets. (i.e. one is 192.168.1.xxx and the other would be 192.168.2.xxx).  This is usually accomplished in the router configuration page.

  HTH,
  JW