I need a PCI of communication Simple controller for my Compaq Presario PC SR5350F?
It says I need this driver... I do? I have more disks.
Hello
You can download the driver for Compaq Presario SR5350F from the following link:
If this isn't the case, you may need to Contact HP for assistance.
Tags: Windows
Similar Questions
-
someone sent me information to try to fix my cd/dvd doesn't work do not and after that following the steps, it is still not work.i said, maybe I need to reinstall the driver if someone can send me the link to microsoft so I can get the driver for reinstall-thank you
Hello
1 did you change on your computer?
2 did you receive an error message?
3. What is the number of the model of the computer?
Method 1:
I suggest you follow the link and check.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.Microsoft.com/kb/982116
Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us
Method 2:
I suggest you to install the drivers from the manufacture of the product and check.
-
Original title: Safe Mode
Can run my computer only in Safe Mode, whenever I try to boot into normal mode I get a screen with lines on the subject. Cannot download even the peak "white screen" now.
Any help will be greatly appreciated. Thank you.
New: I get his message when trying to activate the controller PCI of communication Simple:
"Windows has enabled this device, however, this device still does not work correctly."
Then:
The drivers for this device are not installed. (Code 28)
To reinstall the drivers for this device, click on reinstall.
Then:
"Windows cannot find the driver for your device".
Get you the drivers accessing a site Web on your computer or the manufacturer of the graphics card > Search a drivers and download article > search your computer or your graphics card model number > your operating system > drivers for it: either video / graphic / Chipset (according to the label)
See you soon.
-
the search for drivers for a compaq presario cq57-339wm pci
I'm looking for drivers for a compaq presario cq57-339wm pci. I have no internet and were in section hp driver and can't find it. someone would be so kind as to send me to the right place. Thanks in advance Lewis
You are the very welcome.
You need this driver for the controller of communication simple pci:
-
Which hard drive do I need for my compaq presario CQ60
which hardd drive do I need for my Compaq Presario CQ60? And where would be a good place to try to get a quality for a lower price? Thanks advance.
Hello
The player at the link below is an example of one that would be great for your laptop computer, as long as it's the same capacity or larger than your current HARD drive.
The procedure to replace the hard drive is detailed from Page 51 in your & Maintenance Guide.
Once this is done, simply use your recovery DVD to reinstall the operating system on the new drive.
If you do not have your recovery discs, you can order a replacement set using the link below.
If you have a problem with this link, order them directly from HP.
If you live in the United States, contact HP here.
If you are in another part of the world, begin here.
Kind regards
DP - K
-
Need win 7 64 bit drivers PCI Simple Communications Controller for HP Compaq 15-s006TU
PCI\VEN_8086 & DEV_9C3A & SUBSYS_2211103C & REV_04
PCI\VEN_8086 & DEV_9C3A & SUBSYS_2211103C
PCI\VEN_8086 & DEV_9C3A & CC_078000
PCI\VEN_8086 & DEV_9C3A & CC_0780Try this driver...
If this does not work...
Go to Device Manager and click on the controller of communication Simple PCI in need of a driver.
Click the driver tab. Click on set to update driver. Select her browse my computer for driver software method and find the folder of the driver that was created when you ran the file.
This file will be located in C:\SWSetup\sp64961. Make sure that the include subfolders is selected and see if the pilot goes like this.
If not, return to navigate my computer to the window of the software driver and at the bottom, select Let me pick from a list of drivers for devices on my computer. Select Have disk, and then go to: C:\SWSetup\sp64961\Drivers\MEI\heci and select the device Intel(r) Management Engine Interface in the list and see if the pilot goes like this.
-
I need the driver for ethernet controller and network controller driver, driver pci device video controller for Windows 7 Home Premium 64 bit driver
Someone please help
PCI\VEN_10EC & DEV_8136 & SUBSYS_148A103C & REV_04
PCI\VEN_10EC & DEV_8136 & SUBSYS_148A103C
PCI\VEN_10EC & DEV_8136 & CC_020000
PCI\VEN_10EC & DEV_8136 & CC_0200PCI\VEN_14E4 & DEV_4727 & SUBSYS_145C103C & REV_01
PCI\VEN_14E4 & DEV_4727 & SUBSYS_145C103C
PCI\VEN_14E4 & DEV_4727 & CC_028000
PCI\VEN_14E4 & DEV_4727 & CC_0280PCI\VEN_10EC & DEV_5288 & SUBSYS_148A103C & REV_01
PCI\VEN_10EC & DEV_5288 & SUBSYS_148A103C
PCI\VEN_10EC & DEV_5288 & CC_FF0000
PCI\VEN_10EC & DEV_5288 & CC_FF00PCI\VEN_8086 & DEV_A012 & SUBSYS_148A103C & REV_00
PCI\VEN_8086 & DEV_A012 & SUBSYS_148A103C
PCI\VEN_8086 & DEV_A012 & CC_038000
PCI\VEN_8086 & DEV_A012 & CC_0380Hello:
See if these drivers work...
PCI\VEN_10EC & DEV_8136:
This package contains the driver for the Realtek NIC installation files in the notebook models and operating systems.
File name: sp49600.exe
PCI\VEN_14E4 & DEV_4727:
FTP://ftp.HP.com/pub/SoftPaq/sp57501-58000/sp57965.exe
PCI\VEN_10EC & DEV_5288:
This package contains the installation files for driver for the Realtek card reader for laptops models and operating systems.
File name: sp49599.exe
PCI\VEN_8086 & DEV_A012:
-
I already paid for and installed 10 windows on my Compaq Presario SR1320NX. But there is no driver from the internet. I can't connect to internet at all. Desperately need help.
On the HP support site:
Desktop Compaq Presario SR1300 series - retired products the following products have been removed and is no longer supported by HP. All official HP support for these products has been removed from this web site.
I recommend using a usb wifi dongle which has Windows 10 support.
-
missing PCI Simple Communications controller for HP Compaq 6000 Pro SFF PC
HY, I installed windows 7 on my Hp compaq 6000 pro.but simple Communications controller PCI is not found. I searched a lot and tried a lot of drivers.but this problem is not fixed
Here's my hardware ID
PCI\VEN_8086 & DEV_2E14 & SUBSYS_3048103C & REV_03
PCI\VEN_8086 & DEV_2E14 & SUBSYS_3048103C
PCI\VEN_8086 & DEV_2E14 & CC_078000
PCI\VEN_8086 & DEV_2E14 & CC_0780Hello:
You need this driver...
This package contains the device driver Intel Active Client Manager Host Embedded Controller Interface (HECI) for desktop models and operating systems supported.
-
HP Probook 450 G1 - pilot missing (Controller PCI of communication Simple)
Hello
I need driver for the following device. Thanks for supporting.
PCI Simple Communications controller
Hardware ID
PCI\VEN_8086 & DEV_8C3A & SUBSYS_1942103C & REV_04
PCI\VEN_8086 & DEV_8C3A & SUBSYS_1942103C
PCI\VEN_8086 & DEV_8C3A & CC_078000
PCI\VEN_8086 & DEV_8C3A & CC_0780Thank you.
Anh
Best,
AnhHello
Try >
http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63889.exe
Kind regards
-
Tecra S10 - 'controller PCI of communication Simple' unknow device on Win 7
Hello
I'm not able to install this unit. I installed a clean Windows 7 64-bit)
I tried to install the driver "Intel AMT" and tried to disable AMT in the bios (has been disabled by default). As sugested in the thread following [http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=180500𬄔].
But the device keep giving a sign of exclamation in Device Manager.
Another idea?
Thank you very much
Neroken
Check the code provider on http://www.pcidatabase.com/
You have installed the drivers LAN, WLAN and BT? -
Serial port PCI and Communications Simple driver (s)
I just reinstalled windows 7 Pro X 64 and I have all the drivers, but these two. Any ideas on what they are, and where I could get them?
PCI serial port
PCI Simple Simple Communications controller
I have a HP Elitedesk 800 G1
Hello:
You need this driver...
-
HP dear community,
Been Searchin' the WWW for ages now.
I installed Windows 10 on this PC and the following driver keeps bugging me:
PCI serial port
PCI\VEN_8086 & DEV_2E17 & SUBSYS_3648103C & REV_03
I triend Intel Driver Update Utility, which breaks down, I tried the GROUND driver and the driver of the AMT. Alll of them fail or are already installed.
Please help me with this driver.
Thank you in advance,
FSolleveld.
Kind regards
Frank Solleveld.Hello:
You need the driver for this device...
This package contains the Intel Local Management Service (LMS) and the support of Serial - over - LAN (SOL) for Intel Active Management Technology (AMT) for the supported desktop models and operating systems. This software is part of the Intel Digital Office Initiative.
File name: sp45367.exe
-
I need to purchase a recovery CD for Windows XP Home Edition for a Compaq Presario.
When I try to power to the top of my laptop, I get a black screen. After I turn on by pressing the F8 key, I get several options for the power upward. No work; I always get a black screen. I thin I need a recovery CD to load so I can restart Windows XP. Help!
Read this:
http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&cc=us&DocName=bph07143
-
lack of driver video controller for hp compaq nc 6220, help!
I'm missing my video controller driver after downloading windows 7, does anyone know how I can get it back! Thank you!
Hello:
The graphics card in your laptop is not completely capable of W7.
Here is a work around, you can adjust the resolution of the screen and have the graphics acceleration running W7.
You won't have Aero (this is why the GMA 900 is not completely capable of W7).
Download and run this graphics driver. You will probably get an error not supported operating system.
Conclusion of any windows error.
Go to Device Manager and click to expand the category graphics cards.
Click on the VGA Standard card. Click the driver tab. Click on set to update driver. Select her browse my computer for driver software option and navigate to the folder of the driver that was created when you ran the file.
This file will be located in C:\SWSetup\sp34749.
Make sure that the include subfolders is selected and if all goes well, the driver will be installed.
After reboot, you should have decent graphics, just not Aero.
Maybe you are looking for
-
Windows Update could not search for new updates error code 80092026
Note that Windows fails to return information to update and ends, so no access to the update site is possible by this means. What relief is available? From journal Windows Update: 2010-05-03 01:05:20:325 1076 128 c putting featured update notificati
-
I am not able to connect to ePrint
I am not able to connect to ePrint, after entering the user name and password a new window appears, advise to click on the connected HP. After clicking on the button I get error 404, page not found. Not either of the 5 applications that are installed
-
Install windows 8, no problem. But won't take a password and have tried everything, including the route go to account.live.com repeatedly. Is there a solution out there
-
Lightroom CC repeatedly disconnects the card SD/CF. reader
I have a STEEL Hoodman UDMA reader, and when Lightroom turns the SD or CF card gets ejected after about 1 minute. Once I stop Lightroom, stops to eject.Running Mac OS x El Capitan - last Lightroom CC.
-
Values of expression el solve before making
Hi allIM using Jdeveloper 11.1.1.7.1.I have a requirement in which Im trying to get to set values of UIComponent on a jsff before the page is rendered.I am able to access the UIComponents and obtain expressions of the value using a pagephaselistener