I need drivers to install Win7 64 bit on mSATA SSD
Hello!
I need drivers to install WIN7 x 64 on THNSNH256GMCT mSATA SSD
Serial number on my product is 23NS10BFTABY
Thank you!
This serial number does not help much. It will be better if you can display the name of the exact model laptop and the model number.
Anyway, visit Toshiba support and download page for your country and if your laptop model is supported for Win7 64 bit, you should be able to find all of the necessary drivers, tools and utilities.
Tags: Toshiba
Similar Questions
-
Setup error: 0 x 80070057 (installing win7 64 bits 64 GB SSD)
I recently customized built my own office after months of searching. Construction went better than expected for my first experience. I used a 64 GB ssd for the OS install. It worked with no problems for about 2 weeks. I had a game installed ran without problems. I installed another game during the film beginning computer frozen and crashed. OK, I thought, it might be the problem of 5870 gpu or overtheating, but when I restarted windows wouldn't load. I tried option fix windows then as being new to what I did a disc of recovery even as friends had told me to do. Live and learn. However, I then tried a new custom for the ssd Setup and got the error said. I spoke to a support technique for the ssd corsair, and they thought she might have malfuctioned. I RMA the ssd and now have received a brand new from the manufacturer. Now, I tried the new custom on new ssd and windows setup tried to install for a while and then he said (windows could not format a partition on disk 0. The error occurred when preparing the partition selected for installation. Error code: 0 x 80070057. Why should it work for 2 weeks then stop and now with all new SSD, same thing happened but this time windows will not even install at all. I'm just frusterated. Good but not very good software and programming. My computer features: case 800 d corsair, asus p6td deluxe mobo, ati radeon hd 5870, corsair 12 gb dominator ram with flow air cooler, i7-930 with h50 cooler corsair, v64 ssd for the OS, 3 other HDD wd that is disconnected to the operating system load on ssd for sure, power supply modular 850w, controller of fan with more than 5 fans (7 in total) for the great cooling and sony CIFO dvd burner. My time. were 19 c to 42 c according to bios mobo and probes of fan controller. Please any help or someone has to meet this problem before? Thank you for any responces.
Everyone, thank you very much for any help here. My problem has not been resolved and Corsair now told me to RMA the drive solid state for the second time in the last three weeks. I hope the new order arrives quickly and works on the third try with installing windows 7 64 bit on it. I think that little they got tired of talking me on the forum of Corsair, but I hope that this is not the case.
Adapt and overcome!
-
I have a laptop HP550 with a duo Core 1.8, I tried to install win7 64 bit
I have a laptop HP550 with a duo Core 1.8, I tried to install win7 64 bit. My question is this...
"My laptop HP550 with a 1.8 bicoeur processor will accept A Windows 7 64 bit operating system or should I stay with a 32-bit operating system." Any help will be greatly appreciated
Yes, you will be able to run Windows 7 64 bit on this system, but it may not be quick.
-Your processor supports 64-bit.
-2 GB or more of RAM is recommended for the 64-bit version of Windows.Check your.
You need to install Windows 7 64 bit only if you have a reason behind choosing him over 32 bits. Personally, I would recommend that you use the 32-bit Windows.
-
Pavilion Sleekbook 14-b000: try to install win7 64 bit
Hey all, uh I got a "hp Pavilion sleekbook 14-b013au" to fix/installation of the new operating system, on, with a formatted hard drive, none of the scores of original disc hp exist.
They had the hard drive out, he reformatted into partitions of 2 x 250 GB and tried to install win7 64 bit on it, without success.
They tried to hook up the hard drive on a pc, installed the operating system that way, then tried plugging it back into the Sleekbook and should work.
They won't win 8.1 back on it.
I have a copy of work of this OS to a flash drive (used the "Windows USB/DVD Download Tool" to create a bootable flash drive).
I am unable to install this, as the laptop will not recognize the flash drive, after that Windows Setup starts. Help, please
Hello:
I have a few suggestions...
1. you must ensure that the secure boot is disabled and legacy mode is enabled in the BIOS to be able to install and run windows 7.
2 make sure the flash drive is plugged into a USB2 port. It will not work on all USB3 ports.
-
Can I legally use a win7 32-bit code pro install win7 64-bit, if I have the 64-bit disc?
Recently, I accidentally bought 32-bit win7 online for a new PC I am building. I wanted 64-bit. I have a 64-bit version of anoterh installation disk I did and was wondering if you could just use the 32-bit code to install win7 64-bit instead of having to go through the process of return together and everything. Thanks in advance for answers!
The product key is not specific to architecture (32 or 64-bit), but the spirit of the OEM System Builder licensing is, both 32 and 64 bit DVD are sold separately and include their own product key.
If its OEM license that came with a new computer, you could of course just to borrow a Windows 7 Professional 64 bit DVD retail or OEM system builder DVD and use it with your product key provided with the installation of 32-bit, and nothing would be wrong.
There are two types of OEM suppliers. Royalty OEM vendors can distribute Windows products by using the preinstallation (SLP) product keys so that end users can bypass product activations. All other OEM vendors distribute Windows products by using the standard product keys that require the user to activate Windows products.
-
Cannot install Win7 64 bit only Win7 32 bit
Hi I'm new on this and don't know if this is the place to ask questions so here I.
I'm trying to install Win7 64-bit using my HP dv7 laptop has Win7 64 bit on it, who can't seem to install only win7 32 bit
How to install Win7 64 bit
also how can I increase the size of my C drive of 20 GB for a larger size
I am usiing Vmware Workstation
Worm 6.5.3 build 185404André Pett wrote: resize the virtual disk is possible within the parameters of the virtual machine HARD drive
The OP is using VMware Workstation 6.5.3, and there is no option in the user interface in the virtual machine settings to increase the size of the hard drive in this version and must be done from the command line using vmware-vdiskmanager.
and the type of disc is not the IDE.
Not sure why you would say that as an IDE hard can be extended with a vmware-vdiskmanager or virtual machine settings as appropriate in future versions of VMware Workstation. I did several times that I can remember.
-
Need advice for installing Win7 on Satellite A300
Hello
I intend to buy Satellite A300-1MT (PSAGCE), and before I do I just check if there are still some problems with drivers for W7 for this model?
On other forums, I saw that there are some problems with drivers like music keys, webcam, touchpad and FN keys and so on...So, can someone confirm me that all drivers are now available and everything works?
And also until I started installing drivers is there anything I need to know (wait used?) Or perhaps better: does anyone have a special notice?
Please, find the will to respond! Thank you very much!
Hello
I have the Satellite A300 running Win7 32 bit, but my model is PSAG8E.
To be honest I have very good experience with installing Win7 on Satellite A300 and I can recommend you to install on this Satellite.If you visit the Toshiba support page under http://eu.computers.toshiba-europe.com > support & downloads you will see that your laptop model is supported Win7 and it shouldn't be problem to install all the necessary drivers and other stuff of Toshiba.
Here is the list how I did this exactly:
atellite A300 (PSAG8E) and clean Win7-Win7
-chipset driver
-Storage Manager
-display driver
-driver sound
-modem driver
-utility supervisor
-infrared
-patches 1.2
-configfree
-VAP
Hardware - toshiba
Control - HDMI
-WLAN driverEverything works well but lacks some drivers
Added Vista tips:
Toshiba - help - working properly
-Card reader - installed correctly
-Webcam driver for A500 - tested with Skype - works correctly.
Driver - SynapticsWin7 works well and I am very satisfied. No problems with the feature keys FN.
If you are going to buy this laptop start installation Win7 following this order of installations. Please inform us of problems and I hope that we can help you about this.
-
Need help with installing Win7 on Satellite L70-A-12W
I bought Satellite L70-A-12W with preinstalled victory 8.1 two days ago... I have no recovery of win7, but I have Win7 64 Bit DVD new.
I would like to install win 7. I follow the instructions concerning the closing down, on Bios (I have version 1.3) safety boot is disabled and the boot mode is MSC mode.I did a recovery on USB media if something with is wrong. Earn 8.1 I installed Paragon Partition Manager 14 (free version) and see the Partition Table. It UriPattern like this:
1 partition - system - 1-GB NTFS (Partition of Service);
2. partition (no name) - 100 MB - it's the gray color.
3 partition (local partition) - 128 MB;
4 partition C: (win 8.1) - Go 920 - NTFS drive.
5. partition - recovery - 10.1 GB - NTFS (Partition OEM Service).I would like to keep evrything what is, if possible, and instead og Win8.1 install Win 7 ultimate 64-bit (which I have). And after than that, resize this partition of 100 GB and make a second partition private for my data - partition D: - for example.
I did things in the BIOS and win7 DVD and got error massage: Windows cannot be installed to this disk. The selected disk is of the GPT Style partition...
I found a solution to clean the disc in the BACK, but I'm not sure that I have with this procedure will delete oll data disc. I'll guarantee loos e if I do this... If all other partitions will remain instead of C--> I can always make backup returns with media recovery with win 8.1 and hopes to keep the warranty.
Now, I don't know what I have to do...
I would just have win 7 on my laptop with minimal change to the partition table and all the partitions instead of C (where now is win 8.1).
Could you please help me...
Hello
The question is: why you want to keep the present partitions on the HARD disk.
Using two systems Win 8 and Win 7 on this laptop?The fact is that if you want to use only Windows 7, it s not appropriate to keep the old partitions on the HARD disk.
Secondly, you already have the Toshiba Recovery flash memory stick.
This recovery media allows you to return to the factory settings.This means that recover the laptop using this memory flash USB stick recovery would again create the same partitions and install the Win 8.1 System.
Finally and above all Windows 7 supports 4 primary partitions as primary partitions are applicable to the tables of partition MBR and partition table MBR allow four primary partitions.
After you create the primary partition 4th Windows system will accept only the volumes 'Dynamics' (logical drives). You must create an extended partition containing many logical partitions.
However, if you use a table of GPT partition that is supported by the 64-bit Windows versions, you can configure up to 128 partitions and you need t differ between "primary" and "extended" partitions
In addition, the GPT partition table also requires the UEFI BIOS.
More details here:
http://support.Microsoft.com/kb/2581408 -
Satellite U500 - need drivers for Windows 7 32 bit
Hello
I recently installed Windows 7 32 bit but I can't find drivers for this version of the OS here: http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp
Could help me is it you please with installing the drivers for WIN 7 32 bit?Model: Satellite U500-1DQ PSU8CE
Thank you in advance,
Alexandr.Hi Gint,
There is unfortunately no drivers for Windows 7 32 bit so I think that the Satellite U500 doesn t support this operating system.
Why you have installed another OS without checking the availability of driver?
AFAIK U500 is pre-installed with Windows 7 64 bit then why you changed obsolete 32-bit version that supports a maximum of 3 GB of RAM?In any case, I think you need to get yourself to drivers so check other sites such as Intel, Realtek, etc. directly to get 32-bit drivers.
Alternative, you can search the Web from Toshiba site for other models of laptops they support 32-bit and have similar hardware as U500.Good luck! :)
-
HP 1000-1b09AU: need drivers Win 7 Pro 32 bit
Hello
I just installed Win 7 32 bit and realized that some drivers are missing and cannot be found on the internet.
These are the drivers, I need:
PCI device: PCI-VEN_10EC DEV_5299
Ethernet controller: PCI-VEN_10EC DEV_8136
Network controller: PCI-VEN_168 DEV_0032
SM Bus controller: PCI-VEN_1022 DEV_780B
Can someone help me?
Thank you in advance.
Ferry
Hello
This is the page for all system drivers for Win 7 32 bit for your machine
http://support.HP.com/us-en/product/HP-1000-Notebook-PC-series/5343010/model/7049601/drivers
Checkurtech
-
Install Win7 64 bit update on the new build machine
Initially, I bought a Dell machine with Win XP installed on it, that was obviously an OEM installation. Later, I bought an update to Win7 (boxed version containing two DVD - 1 x 32 bit and 1 x 64-bit).
I looked at the product key on the System Properties screen and it does not contain the letters OEM, then it means that when I upgraded the operating system he converted it from version OEM to a retail version?
The reason for my question is that I intend to use this system for donor parts and build a new one, but it will contain a different MB, CPU and RAM, which if I understand correctly this is what the OEM versions are related to. Building the new system, I will seek to install the 64-bit version rather than the 32-bit on the current computer.
And just to confirm, the old system definetely will be out of use and therefore discarded. I don't mean to reproduce the number of facilities, any transfer from one machine to the other.
Thanks in advance
SteveHi Noel, thanks for your response.
I have to admit your backup response I expected in the case, but...
Since my original post, I have been informed of "Universal PID Checker", I used to check my current installation (the one I'm looking for scrap) and he informed me that I have a retail version.
If I will have to just suck it and see?
With a question mark above it, I do not want to splash out on a new license if it is not needed.
You will need to invest in a new full version license, because the machine you build will not have an existing previous license eligible to use the upgrade version.
You can try the following and see if it works:
How to do a clean install with upgrade disc:
Boot from the Windows 7 DVD
Click Install now
Accept the license agreement
When the option is displayed to select a type of installation, click (Custom advanced)
Click on drive Options
Select the disc/s click on Delete
Click new
Click on apply
Click OK
Click Format, and then click next to proceed with the installation
Skip entering your product key Windows 7 and complete the installation.
When you reach the desktop, click Start, right-click on computer
Click on properties
Scroll down to the Windows Activation
Click the link x days before activation.
Click on the link that says: "show me other ways to activate.
Enter the product key
Click next
Select the Activation of the phone
Click Next when you enter your key page
Select your country
Click Next, call the number listed
Be sure to explain your situation to the Appeals Officer.
Provide the installation generated when ID requested by the call agent
They give a confirmation ID in return, enter it
Click next to complete the activation.
However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.
15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.
So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.
or
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
http://support.Microsoft.com/kb/950929/en-us -
Need drivers for Win XP 64 - bit - Satellite A300D-15B
Hello
I recently bought a ' Satellite A300D-15B "it came with Vista Home Premium 32-bit.
I want to install XP 64-bit. The driver page have drivers for XP, but it does not specify this time are these drivers for XP 32 - bit or 64-Bit XP.
Can come a confirm which edition is for drivers are?
Thanking you,
Ganesh
Hello
There's no drivers 64-bit of Windows XP and I think it won't be available on the Toshiba driver page. Why?
There are a few reasons for this.First of all the Vista is the disciple of Win XP and only Vista 64-bit drivers are designed for new laptops and computer equipment.
Second, really unique operating system Win XP 64-bit. It was not so popular like Win XP 32 bit and most of the applications and software are not compatible with the XP 64 bit OS.
I put t know many people who would like to use the 64-bit XP and maybe this is the main reason why 64-bit XP drivers are rare.
I think that if you want to use this OS on this laptop, then you have to collect drivers 64-bit XP to your own hand.
Good luck
-
Need drivers for windows 8 64-bit
I need drivers for my computer hp laptop
This is the device of each of the missing drivers id:
PCI: PCI\VEN_10EC & DEV_5227 & SUBSYS_2164103C & REV_01
SM bus controller: PCI VEN_8086 & DEV_9C22 & SUBSYS_2164103C & REV_04
video controller:PCI\VEN_1002 & DEV_6660 & SUBSYS_2164103C & REV_00
I am waiting for your answer, please send me the links for the appropriate drivers
As requested, Windows 8 (64-bit) drivers are at the following ADDRESS.
-
Why I can't install Win7 64 bit on my 64-bit Windows Virtual PC virtual machine? -Help!
My PC is running Win7 Ultimate 64-bit and has 8 GB of Ram.
So, I downloaded and installed Virtual PC 64-bit version.
I launched VirtualPC and created a virtual, configured machine with 2 048 MB memoryThen I put my disk in Win7 64-bit Windows Installer in my CD-ROM drive and my virtual machine virtualPC.
The black screen is come, display, "Windows is loading files...". "and a progress bar.
After a few minutes, this message appeared on the black screen:Windows could not start.
File: \windows\system32\boot\winload.exe
Status: 0xC000035a
Info: Attempt to load a 64-bit application, however this CPU is not compatible with the 64-bit mode.I'm puzzled... what he wants to say to me?
No version of Virtual PC supports x 64 guest OS only 32 don't bit OS
-
Here is where I have so far:
-Create Win7 64 bit VM
-Click on "change settings...". "> Hardware > 1 CD/DVD drive, checked"Datastore ISO File"and accessed my ISO then also"Connect to light ".
-Booted the machine to the BIOS configuration and the boot order changed to boot from the CD first.
-Power On: turn on the machine and it will fail to start the ISO
I have attached a screenshot where it happens to. Why can he have failed to start?
Welcome to the community,
the first step, make sure that the ISO image is bootable, for example, not only a service pack image. MS using similar names for Windows with SPs and SPs only.
André
Maybe you are looking for
-
"Display the release notes" fails in the Add-ons Manager
Before you manually update the extensions of the option "Display the Release Notes" fails with an error message. I always like to know what the changes will be implemented before the update. It has been produced on each update of each extension for t
-
HP ENVY laptop - 15-k277ca: upgrade memory RAM - HP ENVY 15 Notebook
Hi all! Last weekend, I upgraded the RAM in my laptop HP ENVY laptop - 15-k277ca. The machine has 1 module of 8 GB by factory, so I bought another module of 8 GB (same brand and same rate). But the problem is that the machine does not recognize this
-
As you can see there are 3 attached files. If you run this code, you can see it is shown three lines on the first chart and a line on the second chart. My goal is to get all the lines on the same gragh. How can I do?
-
The HP Envy 700-327C there a second CD player?
HP Envy 700-327C has a second CD drive or is this a slot to install a? It shows a picture of a screwdriver; This could mean one is necessary to unlock the drive or is necessary to install a drive?