I need help for my Dell AIO 924 printer to work? Is there a driver for it that works with the MSW 8?

Dell said that they won't support their 924 on W8, but I think that it can be used here.  Someone at - it any help?

The response to Windows 7 that I can remember, was to run the driver in Vista compatibility mode.

If this does not work and Windows 8 does not automatically install a driver even for basic printing, Dell you said is the truth...

Tags: Windows

Similar Questions

  • Dell AIO 924 printer

    My AIO 924 printer stopped scanning and copying these past few weeks. I tried unplugging and uninstall and reinstall and not luck. It will print. Any help will be appreciated.

    Thank you

    Steve,

    You have the disc printer? If Yes, then insert the floppy disk to the printer and keep it from running. Go to my computer and double-click it. Locate the drive that contains the disk Dell inside. Right-click on it, left click Explore. Find the folder of the OCR. In the OCR folder, there is a folder of Abbyy. Right click on setup.exe, which is located in the folder Abbyy and left, click Run as administrator. This will install the OCR program.

    Then try to read...

    Update of the list of applications to send scans to

    Rick

  • Error message AIOC exe has stopped working when I try to scan on Dell AIO 924 printer

    I recently bought a Dell studio with Vista (old computer ran XP) desktop computer.  I installed my printer and have been able to do print, but not to digitize from all in one centre, get the above error message

    bredenbm,

    We will try to reinstall the printer using the instructions below. This will install the Dell all-in-one Center.

    First of all, make sure that your computer has all the updates of Windows. I've customized those too, especially the .net framework(required to run many applications). Also make sure you have the latest Java. Since you don't mention how the printer is connected, here the basic instructions for this printer.

    Unplug your printer. Download and run this patch to completely remove the printer from your computer. When the correction is over, it will prompt you to restart your computer. There seems to be a lenghty process so please be patient.

    Restart your computer.

    Download the correct drivers.

    XP drivers

    Vista 32-bit drivers

    Vista 64-bit drivers.

    All other drivers

    Install the appropriate drivers. (Install ONLY the drivers you need) You will be asked when connect you your printer (power on)

    In the digitization to the analysis, if you have the disc that came with the printer, and then insert the floppy disk to the printer and stop running. Go to my computer and double-click it. Locate the drive that contains the disk Dell inside. Right-click on it, left click Explore. Find the folder of the OCR. In the OCR folder, there is a folder of Abbyy. Right click on setup.exe, which is located in the folder Abbyy and left, click Run as administrator. This will install the OCR program.

    Scanning

    Scan using the USB connection, open the Dell all-in-one Center, click on the scan and copy and scan from there.

    Scan wireless, use the buttons to scan on the printer.

    Rick

  • Need help for reading in parallel on the same interface and writing XNET

    Hello. I need help to configure CAN interface to write and read from the same interface.

    I use NI PXI-8513/2. I use CAN1 as interface.

    My had TO send status messages CAN every 100ms. I have to read in order to return akntoowlege to keep DUT CAN interface happy and not make mistakes.

    So, I want to open Strim Session and readall frames in the loop. At the same time, I need to be able to write in a frame HAD at the time...

    I only need to read one picture at a time too, but since I know the ID, I can pull it from the stream.

    What I'm confusing all is how to put in place the same CAN1 interface to be able to write and read in parallel.

    I think I would get errors that interface is already in use.

    Since I'm new to CAN, I was read and write only when necessary. But, sometimes I was getting errors on my messages. Sometimes I get message, sometimes miss me. But, when I run CAN test criminal as sniffer he sends and written every time. I was told it's because it recognizes all messages.

    I opened to suggestions of how best to implement the interface.

    I guess I can use CAN2 and separator to work around this problem, but I would use an interface if possible.

    Thank you

    Hi Rus,

    The XNET hadrware takes care of most of the low level of detials for you. The reading and writing of the circuits are both connected to the bus at any time. When you write to the hardware it will try to put a frame on the bus at the first opportunity he can. If the frame loses arbitration material re - will attempt to send the frame up is successful. Reception equipment monitor activity on the bus, regardless of what it conveys. The material received will usually throw a framework that was sent by communication equipment, but there is an Echo property pass to circumvent this behavior too.

    Take a look at the example of the expedition: MAY-> NI - XNET-> Sessions-> multiple Sessions Intro-> CAN even exit entry framework Port unique Point.vi. Keep in mind that this example you will need to use a second CAN interface to recognize frames, it transmits. I would recoment against the example CAN output Frame Single Point which would mimic your ECU if you choose a type of cyclic frame running this example.

  • Need help for VCP training after clearing the exam VCP510

    Hello

    I'm Kelly, I managed VCP510 review but not followed the VCP 5 ICM training. Now, I am registered for the training but need your help in this.

    How VMware will know that I passed the exam and how it will get the details of my training? (Is there a procedure while registering for training to provide details as Exam Centre marksheet, VCP ID etc.)

    Hope you understand my query

    Best regards

    Yoann

    After completing the training you will need to send an email [email protected] - this is one of my 'frequently asked questions' on my blog: http://vmwaretraining.blogspot.co.uk/2012/06/vcp-common-questions.html

  • I need help for my gradual removal, in the animation: how to add a link to your animation?

    I really want to know how to add the link to your animation.

    Well when I pass the mouse on my animation film, it stops and when I leave the animation continues... but what I want when the mouse over the animation, I want to click on the animation and get me a link.

    Here is my code and I'd really appreciate any help... Thank you very much in advance.

    function stopFade(event:MouseEvent)
    {
    Container.Stop ();
    }
    function resumeFade(event:MouseEvent)
    {
    Container.Play ();
    }
    function aller(event:MouseEvent)
    {
    getURL (www.google.com);
    }

    container.addEventListener (MouseEvent.MOUSE_OVER, stopFade);
    container.addEventListener (MouseEvent.CLICK, go);
    container.addEventListener (MouseEvent.MOUSE_OUT, resumeFade);

    You should learn how to use the Flash help documents.  If you are looking for the function that I said to use the answer for you (I'm not complaining, but try to help you to learn how to help yourself)

    navigateToURL (new URLRequest ("http://www.google.com"), '_self');

  • Need help for import that were previously imported photos and then deleted

    I am trying to import a few photos that I initially imported... then deleted (off the coast of LR and my HDD + remove my trash). LR says already imported photos, but I know for a fact that they have been deleted and I want just their reimportation. Is there a way to get around this? IMO

    If you erased them from your computer by using your browser in the system, then Lightroom perhaps even previews of the files. Did you remove them from Lightroom using Lightroom?

  • Need help for error on N3024 after the easy Setup Wizard

    I feel that I am a rookie mistake, but I can't figure out what I did wrong.  Any thoughts on how to solve this conflict IP error?

    Thanks, Matt

    Make sure that the OOB is connected to a management network that is isolated from the network in the Strip.  They should not go in the same network.

  • I have problem with new Explorer Firefox, because I need Lukutulkki translation program. I even does not work with the new firefox Explorer. What can I do with it?

    If I download the most recent firefox Explorer I can't use Lukutulkki program translation. This program is very important for me becauce I
    do not quite understand English. Should I start to use Googlechrome
    Explorer or do you have some other fix it

    See the help page at

    If this does not resolve the problem, contact the author of the add-on for the support

    You can also use various other modules or Web sites to translate

  • Dell AIO 924 solution of driver for windows 7

    Any who has any success installing the drivers that works for this Dell AIO 924 printer in Windows7?

    mlasfeller,

    Try to run the patch, it may or may not work. Also try...

    Driver Manual printer removal

    Restart the computer, and then try installing the Vista drivers. It may or may not work, but Windows 7 is supposed to be backward compatible.

    Please follow the instructions below and then tell me what happens.

    First of all, let us make sure that your computer has the latest Windows updates, especially of .net framework, necessary to run many applications and the latest Java.

    Unplug your printer.

    Download and run this patch to completely remove the printer from your computer. Run the fix, a MUST on Vista machines, until it prompts you to restart your computer.

    Restart your computer.

    Download the correct drivers.

    XP drivers

    Vista 32-bit drivers

    Vista 64-bit drivers.

    All other drivers

    Right click on the file setup.exe, on the left, click Properties, compatibility of the left click. Change Vista compatibility. Then, install the appropriate drivers. You will be asked when connect (printer)

    To install the drivers, sometimes the file decompresses and does nothing. You must find the setup.exe file, right-click on it, then on the left click on run as administrator *.

    In the digitization, if you have the disc that came with the printer, and then insert the floppy disk to the printer and keep it from running. Go to my computer and double-click it. Locate the drive that contains the disk Dell inside. Right-click on it, left click Explore. Find the folder of the OCR. In the OCR folder, there is a folder of Abbyy. Right click on setup.exe, which is located in the folder Abbyy and left, click Run as administrator. This will install the OCR program.

    Scanning

    Scan using the USB connection, open the Dell all-in-one Center, click on the scan and copy and scan from there.

    Scan wireless, use the buttons to scan on the printer.

    Rick

  • Cable Dell AIO 962 printer USB communicates only with my 64-bit Windows 7 PCs

    I feel I've done everything I can to get my dell AIO 962 Printer to work on my 64-bit windows computer 7. I even bought another thought of UBS cable that could be the solution. I have the compatible driver download and when he invites me to connect the USB cable from the printer to the computer, and I don't... Nothing is happening and I'm not able to complete the driver installation. Help please!

    Rick,

    So I uninstalled IE11. Then I tried to reinstall the driver, but when he says to plug the USB cable into the computer, there was still no communication between the printer and the computer.

  • Need help for optical safety circuit.

    I buy these parts and prototype with real components, but since I multisim, I thought it would be nice to create the circuit and maybe work through issues I can practically.

    I need a circuit that takes 120 VCA, generates 5 VDC and 1.5Vdc power of optical transmitter and receiver.  I actually use a data port because he has great range and is pretty cheap.  Rather than send the binary code well I just send a light stead that is broken or not broken through doors and windows in my house.  Then the receiver sees this as an entry and order a relay.

    I tried several voltage regulators that come with multisim, but I get an error of execution of my circuit.  Really I can't the 120 VAC to power levels necessary for the functioning of the optics.

    Otherwise I might want to run on a system 120Vdc with battery backup, so throw a 120Vdc up to 20 v DC switching power supply - but I have not found a SMP in the library which takes 120 as input and as output 20.

    Basic plan: 120VAC source-> transform to 24Vac-> Full bridge rectifier to ~ 20 v DC-> voltage capacitor filter on the input of two voltage regulators (1 to 5 VDC, 1 to 1.5Vdc) - then circuit since the two power supply of the transmitter and the receiver.

    I just need help for 5V and 1.5V, from there, I know that the real world circuit will work component tests already carried out.  Thanks for reading.

    I didn't Multism so I can't advise you on the compatible models. I ran the model on semiconductors with slight modifications of format on my SPICE simulator based on Berkeley Spice 3f5. I had to change the format of model resistance semiconductors appeal but has not changed any values.

    The output of your power supply circuit 3 (with 5 V, not the 1.5 V regulator regulator) was 4.99995 V.

    There are a few messages about changing templates published for compatibility Multisim woth. You can search those to see if there are any suggestions on what you'll need to fix in the model.

    Lynn

  • I need help for the upgrade of my current system.

    I need help for the upgrade of my current system.

    I have SBS 2008 with (Exch 2007, SQL 2005, Sharepoint, backupexec 2010 for sbs) licenses.

    I want to make the larger environment using the following:

    (1) apply Virtualization

    (2) apply to the failover process (clustering)

    "(3) the environment must support adding server terminal server, ERP server, exchange server, domain controller, backup manager.

    Storage 4) that supports Raid (1 and 5)

    UTM excellent 6) that supports (SSL VPN, VPN Global)

    suitable backup solution 7)

    (8) good antivirus for clients

    my questions:

    (1) can you provide me with a good design for this environment

    (2) should I choose what operating system:

    Microsoft datacenter or company

    I know datacenter provide us the unlimited VM but needs per processor license

    so if I have two Grouped servers I want to buy 4 licenses

    and just 4 VMs per company license... to say that we have two servers and maintain 8 vms so wat happened if 1 goes down... How can I migrate the 4 virtual machines on the server failed to another server group... ? should I buy enterprise license?

    (3) if I get the SAN storage for data... How can I save this storage... should I get another SAN?

    (4) how can I upgrade SBS stad single server (windows standrad) without losing the licenses as Exch 2007, SQL 2005, sharepoint.is it a must to buy an edition full std server or there is a way to upgrade (license wise, I mean)?

    (5) what about win2k8 license for VM:

    lets say we have physical that has windows license so that enough to have windows for VM or should I buy windows for VM licenses?

    (6) can I use backExec license for SBS with windows 2008 standard

    (7) who better to virtualization AMD or INTEL

    (8) hyper V or VMware?

    (9) what of Microsoft data protection Manager... is this good?

    (10) what virtual machine manager? What are the benefites keys

    Thanks in advance

    Hello AnasAI,

    You can find the Server forums on TechNet support, please create a new post at the following link:

    http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

  • How can I get a driver for a Dell AIO 946 Printer?

    Original title: pilot

    The Dell AIO 946 Printer is not a driver. How can I get a driver for this printer?

    From Dell.

    http://support.Dell.com/support/downloads/DriversList.aspx?c=US&l=en&s=GEN&ServiceTag=&SystemID=PRN_ALL_A946&OS=WLH&OSL=en&CATID=&impid=

  • I need help for activation of the real administrator account.

    I have a problem with Adobe reader 9 standard, Adobe customer service asked the unhide real administrator account before you can continue to help me.

    I need help for that.

    http://www.Vistax64.com/tutorials/67567-administrator-account.html

    http://www.howtogeek.com/HOWTO/Windows-Vista/enable-the-hidden-administrator-account-on-Windows-Vista/

    Read the above info.

    See you soon. Mick Murphy - Microsoft partner

Maybe you are looking for