I need help for my printer/scanner/copier to work with my computer

Similar Questions

• Why my CanoScan LiDE 30/N1240U scanner will not work with my computer laptop Dell Inspiron Windows vista?

  I would like to know why my scanner does not work with my laptop, I plugged the wires correctly and it says it installed, but when I press "Analysis" on the real scanner just on my screen with a box saying "there is no application registered for this event.
  The scanner also came with a CD and tried to install that but she had only three possible languages that were: Italian, Duitsch and Netherlands which I didn't understand at all!
  Does anyone know how I could make the scanner work? Thank you.

  http://www.USA.Canon.com/OPD/controller?Act=OPDDownloadIndexAct

  Download and install the correct software for it to Cannon on the link above.

  For English understanding/getting CD problems, contact the Canon Support:

  http://www.USA.Canon.com/consumer/controller?Act=SupportIndexAct

  See you soon. Mick Murphy - Microsoft partner

• Need help for adding printer in virtual XP mode

  Windows 7 64 bit

  HP Laserjet 4250

  I have the XP mode installed for a legacy program that only runs under XP. The integration settings that the printer is shared, but XP mode do not recognize. When I go in the USB menu and click on the name of the printer, nothing happens.

  Hello Matthew,.

  Thank you for keeping us posted.

  I imagine the inconvenience that you are experiencing. However, I appreciate your efforts to resolve the issue.

  I suggest you to send your query on the TechNet forum.

  Please post your request in the below link to find a community that will provide the best support.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itprovirt&filter=AllTypes&sort=lastpostdesc

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• help with installing c3180 printer scanner copier 8.1 windows 64-bit

  I am trying to install a multifunction printer scanner copier on Lenovo C560 photosmart c3180 all in one touch screen desktop.

  I downloaded the HP software, run the file to extract [AIO_CDA_NonNet_Full_Win_WW_140_408] pressed the button install then I get an error message that the system cannot find the specified file C:\GAILW_~1\AppData\Local\Temp\7zS2f64\Setup\hpzshl... about lack of file, then the installation fails

  Please can someone help

  Hello

  Please try running your software security McAfee from the system tray, then turn off the protection in real time as follows:

  Open the software Mcafee, since the Virus and Spyware Protection you are interested in, click on calendar and run scans.

  Next, click analysis in real time.

  Click on stop, select until I restart the PC and confirm by clicking the button turn off.

  Run the installation of HP and check for the difference.

  Who can help to solve the problem?

• HP Photosmart C4150 all-in-One printer/scanner/copier - the file you specified does not contain a compatible software driver for your device.

  I'm about to pull out my hair!

  My HP Photosmart C4150 all-in-One printer/scanner/copier will SCANNER is no longer.  I uninstalled the printer in the hope of re - install and fix the problem, but now I can't re-install.  He tells me I'm the operating system (Windows Vista - 64 bit OS) is not compatible.
  I remember that I kept getting error messages when Microsoft Updates running on my computer and I followed some "fix" for the error to go away in a few months.  I think I should have done something to mess up my driver?
  I'm not computer savvy so I hope someone out there can help me get my printer, re-installed and the scan option to work again.
  It seems to me have tried every download from the HP Web site, and nothing seems to help!

  Hello

  1 did you change your computer, after which the issue started?
  2. are you connected to a domain?
  3. have you downloaded the correct driver version?

  I would recommend that you download the correct driver (Vista 64-bit) from this link and check if that helps.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=1832919

• Adobe Acrobat 9 Pro is compatible with Windows 10? Adobe recognizes no longer scanning for my printer/scanner driver? Almost impossible to find answers and help!

  Adobe Acrobat 9 Pro is compatible with Windows 10? Adobe recognizes no longer scanning for my printer/scanner driver? Almost impossible to find answers and help!

  Hi leighh50950915,

  DC XI & Acrobat Acrobat has been tested successfully on Windows 10.

  Other versions may or may not work, difficult to predict behavior.

  However, try to uninstall & reinstall the printer drivers.

  Also make sure that Acrobat 9 is updated.

  Kind regards

  Nicos

• Photosmart D110 series scanner does not. Printer and copier functions work

  my HP photosmart series D110 scanner does not. Functions of the printer and copier are working.

  I downloaded and installed the latest upgrades to OS Maverick.  Any suggestions?

  Hi @B4inSF

  I can help you to scan to your Mac running 10.9.3.

  There is no full feature software and driver of HP, but the pilot of Mavericks v10.9 OS X for your printer is available through Apple Software Update (ASU).

  With this driver, you can still print and scan, you'll just have to scan from HP software. Scan to the computer from the printer control panel is available only when you use the HP scanning software, so it won't work because there is no scanning software HP as part of the Apple Software Update driver.

  Instead, you can scan using,

  • Method: scan from the print window & scanning

• Need help for optical safety circuit.

  I buy these parts and prototype with real components, but since I multisim, I thought it would be nice to create the circuit and maybe work through issues I can practically.

  I need a circuit that takes 120 VCA, generates 5 VDC and 1.5Vdc power of optical transmitter and receiver.  I actually use a data port because he has great range and is pretty cheap.  Rather than send the binary code well I just send a light stead that is broken or not broken through doors and windows in my house.  Then the receiver sees this as an entry and order a relay.

  I tried several voltage regulators that come with multisim, but I get an error of execution of my circuit.  Really I can't the 120 VAC to power levels necessary for the functioning of the optics.

  Otherwise I might want to run on a system 120Vdc with battery backup, so throw a 120Vdc up to 20 v DC switching power supply - but I have not found a SMP in the library which takes 120 as input and as output 20.

  Basic plan: 120VAC source-> transform to 24Vac-> Full bridge rectifier to ~ 20 v DC-> voltage capacitor filter on the input of two voltage regulators (1 to 5 VDC, 1 to 1.5Vdc) - then circuit since the two power supply of the transmitter and the receiver.

  I just need help for 5V and 1.5V, from there, I know that the real world circuit will work component tests already carried out.  Thanks for reading.

  I didn't Multism so I can't advise you on the compatible models. I ran the model on semiconductors with slight modifications of format on my SPICE simulator based on Berkeley Spice 3f5. I had to change the format of model resistance semiconductors appeal but has not changed any values.

  The output of your power supply circuit 3 (with 5 V, not the 1.5 V regulator regulator) was 4.99995 V.

  There are a few messages about changing templates published for compatibility Multisim woth. You can search those to see if there are any suggestions on what you'll need to fix in the model.

  Lynn

• I need help for the upgrade of my current system.

  I need help for the upgrade of my current system.

  I have SBS 2008 with (Exch 2007, SQL 2005, Sharepoint, backupexec 2010 for sbs) licenses.

  I want to make the larger environment using the following:

  (1) apply Virtualization

  (2) apply to the failover process (clustering)

  "(3) the environment must support adding server terminal server, ERP server, exchange server, domain controller, backup manager.

  Storage 4) that supports Raid (1 and 5)

  UTM excellent 6) that supports (SSL VPN, VPN Global)

  suitable backup solution 7)

  (8) good antivirus for clients

  my questions:

  (1) can you provide me with a good design for this environment

  (2) should I choose what operating system:

  Microsoft datacenter or company

  I know datacenter provide us the unlimited VM but needs per processor license

  so if I have two Grouped servers I want to buy 4 licenses

  and just 4 VMs per company license... to say that we have two servers and maintain 8 vms so wat happened if 1 goes down... How can I migrate the 4 virtual machines on the server failed to another server group... ? should I buy enterprise license?

  (3) if I get the SAN storage for data... How can I save this storage... should I get another SAN?

  (4) how can I upgrade SBS stad single server (windows standrad) without losing the licenses as Exch 2007, SQL 2005, sharepoint.is it a must to buy an edition full std server or there is a way to upgrade (license wise, I mean)?

  (5) what about win2k8 license for VM:

  lets say we have physical that has windows license so that enough to have windows for VM or should I buy windows for VM licenses?

  (6) can I use backExec license for SBS with windows 2008 standard

  (7) who better to virtualization AMD or INTEL

  (8) hyper V or VMware?

  (9) what of Microsoft data protection Manager... is this good?

  (10) what virtual machine manager? What are the benefites keys

  Thanks in advance

  Hello AnasAI,

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• I need help for activation of the real administrator account.

  I have a problem with Adobe reader 9 standard, Adobe customer service asked the unhide real administrator account before you can continue to help me.

  I need help for that.

  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  http://www.howtogeek.com/HOWTO/Windows-Vista/enable-the-hidden-administrator-account-on-Windows-Vista/

  Read the above info.

  See you soon. Mick Murphy - Microsoft partner

• I need help download microsoft NET frame model 2.0 on my computer so that my Lexmark 5500 printer will not work correctly.

  I need help download microsoft NET frame model 2.0 on my computer so that my Lexmark 5500 printer will not work correctly.  Please call me at the

  Thank you
  John Robinson

  Original title: hardware device

  The lies of failure with your method of installation of the drivers / software, you install using a Lexmark CD or download from Lexmark support?

  http://support.Lexmark.com/index?ProductCode=LEXMARK_PRO5500&page=product&locale=en&UserLocale=en_US#2

  NB there is also a firmware update

• I need help for my reader to USB drive on my windows 10 ACER?

  I need help for my reader to USB stick on my chrome windows 10 plug ins acer. Can you help me?

  What Adobe application that you use?

  This is the Adobe Media Encoder forum, and you did not mention anything on this subject. If you can let us know what Adobe application, you need help, we can help you make the right forum.

  Thank you

  Regalo

• Hello, I need help for cancel the payment on my adobe account.

  Hello, I need help for cancel the payment on my adobe account. I'm from Peru, Im paying a monthly fee as a student. Help, please...

  Cancel your membership creative cloud

• Hello, need help for Adobe Reader DC playing animation files that are specified in the pdf output by script Latex Beamer. My Adobe Reader DC refuse to open any format that I gave him.  Thank you very much

  Hello, need help for Adobe Reader DC playing animation files that are specified in the pdf output by script Latex Beamer. My Adobe Reader DC refuse to open any format that I gave him.  Thank you very much

  Hey ihorl18351266,

  Please note that you can open PDF files using only the CD player. Any other format will not be supported by the software.

  Kind regards

  Ana Maria

• I need to make a contour line around an illustration for a cup OPOS. I work with CS5.

  I need to get an invisible line around this image by following the outline of the image, so I can cut it with a printer OPOS. I work with CS5. Could someone help me please?

  

  Select what you want the line to encompass. copy and paste to the prior (ctrl + f). Keep what you paste selected. Open the pathfinder Panel (window > pathfinder). Click on "join". Give your new object no race / no fill.