I need help on the colors in first pro.

Similar Questions

• Need help with the color picker please

  OK, I'm green to the illustrator cs4 program. But I know it's a setting somewhere that I am missing, just not sure of the correct to check or change place. When I create an image, select the following color hex #0039 6 to use as a background color, when I save the image, the colour of say's: 1F429B

  why it converts it and how do I change to not do this?

  cswd,

  To keep the color, your file > Document Color Mode should not be RGB, CMYK.

  In the CMYK color Mode, when a color is outside the range of CMYK, it will be changed to the color (I hope) best equivalent within the CMYK range.

  Of course, if you need to print CMYK color, you must work in CMYK mode.

  Exclusive Web / another screen use, stay in RGB.

  If you need both CMYK and RGB use screen printing, you will get (usually) different appearances unless you start in CMYK mode.

• Hello, a graphic designer created my logo. I need to change the color from black to white and then make it bigger so I can add it to a T-shirt. I looked online and can't find a way to do it. Please help :)

  Hello, a graphic designer created my logo. I need to change the color from black to white and then make it bigger so I can add it to a T-shirt. I looked online and can't find a way to do it. Help, please

  Guess that's your logo. His place of 1000px

  

  Select each layer, and then type cmd - I or ctrl-I on the keyboard and that will reverse the color of the objects on the layer. Black is the

  opposite of white

  

  And then resizing the image size under Select image menu and place values expanded in the dialog box

  as below.

  

  That's all. It may be useful

  Terri

• Need to change the color of flight hover/mouseover on flash file - HELP!

  Hello world

  I am doing a project for work and need to change the color on this file I purchased from iStockPhoto. It's a flash world map file, which highlights the countries you select Green. I just want to change it so that all the highlights are made in red instead, but no am not a flash developer so don't know how to do it. I used flash briefly before for minor changes, but can't seem to find the answer anywhere. I tried Googling it... etc!

  This is the file that I bought.

  http://www.iStockphoto.com/file_closeup.php?id=2788655

  Any ideas would be MUCH appreciated!

  I took a glance at the file you sent. This file was made some time in an older version of Flash. I'm guessing that version 6. The Actionscript code in the movie is AS2. The file is in the scenes and consists of buttons, a lot, a lot, buttons. If you open the movie library, you will see a very long list of items that are used in the film. The first point, Afghanistan, for example is a single country. If you open this button in the editor, you will see there two executives, above. Each country drawing in each of these frameworks is composed of a group. That's why he shows an overview rather than the country in color.

  To change the color for the rollover State:

  1. go to section in addition to a single country.

  2. choose Select all from the Edit menu, or use the keyboard shortcut.

  3. choose a jump outside of the Edit Menu. This will separate each item in the group.

  4. use the selection tool to select the sketch.

  5. in the toolbar, select a new color line and filling for this country.

  Repeat if necessary. Save often. Work of a duplicate of the original film, just in case.

  Simply re-color of each country, the continents are made up of the country.

  I hope you have a lot of time, it will be horribly tedious.

• Need to change the color of a dark black blue file

  I need help in the conversion of a file of a blue color with an intense black. Black rich meaning 40 c, 30 m, 30y, 100 k in the darker areas and the rest of the file must have a neutral gray balance. It would be easy if it was just a solid background, but the file I provided has a star on the middle of it. I think it can be done with the mixer layers or hue/saturation, but my efforts have not produced the file exactly as required. This is a jpg of the attached file. Any help would be greatly appreciated.

  

  1 convert the file in Lab Mode and zero a and b channels to produce a monochromatic image without sacrificing the details.

  2. now convert to grayscale. It will look like this.

  

  Choose Edition > color settings > CMYK > customized, choose gray Componeent replacement (GCR) and change the black generation heavy. Note that now the Gray ramp shows curves similar to your goal.

  

  Now, choose Mode > Mode CMYK color to shades of gray in this change CMYK

  Go to curves, choose the darkest black area in the image, mark.

  The values would be present as follows in the Info Panel. Notice they are cries of aim you values remotely.

  

  Adjust the point on the curve in each of the CMYK channels to match your points of view, as shown below

  

  Note that we now have the values of your target and the image looks like this:

  

  Last return, use your black generation assigning one you normally.

  One final note: Although your screen might not reflect a difference, I suggest you talk about your lithographer values that you have chosen. They add up to 200% solid which you can choose to increase to an even richer black (if the paper supports all).

• Hello need help with the opacity mask.

  Hello need help with the opacity mask. I hope someone out there can help

  I inherited a logo that appears to use a Logo of OM has a shape with a grad. This grad at first sight is not used in the Grad scheme and there is not editable.  Looking at the transparency palette I find an OM (pic1) output option. If I choose what the grad on separates it from the page of the form, that is from there I can change/remove as required (Note2).

  However, sometimes (he did no change), I'll be back to the same original form and output option is grayed out and is no longer available. Or I go to the similar shape that has the same treatment and I can't go out OM (pic3)

  The only difference is the thumbnail in the transparency palette, which is strong in pic1 and rated on pic3. What Miss me?    I'm not clear what the advantage is simply OM using the Grad palette to apply a grad in my form, but until I can get rid of OM who is there, I can't comfortably apply to the grad I want.

  The white gradient LHS I have no problem with. I choose fortunately only and each time get the possibility of release of OM.
  

  

  The other thing weird. When I select the white gradient. Sometimes, the exit option is in the palette without going through the drop-down list (Fig 4).

  Other times seems not that OM has already been applied, because the palette gives me the ability to mask rather than liberation (5 photos). Until I go to the drop down and then I find Release is an option after all.

  What is the difference here?   Not much of a problem, because either way I can release OM to be able to change the grad.

  The file is passed through several hands and play anywhere to try to resolve issues, and many stops and save slot, so something along the line was of course done a logo and not the other because of the difference, but I can't for the life of me see what that.

  

  I hope someone can help. Very appreciated

  
  

  See you soon

  Dave

  Dave,

  I've (mis) understanding the issues, you can account for the box to the right in the main palette transparency (called thumbnail) here.

  Illustrator help | Transparency and blending modes

  represents the masking objects.

  Some of your screenshots show no object mask, so it only is not really a mask even if do the opacity mask has been clicked and there seems to be one in the layers palette, wherever you look.

  I think that it is perhaps the issue.

• Making the ear of corn and need help with the ball.

  I do some corn on the COB for an illustration and I need help with the texture of the ball. I've been slowly making progress with gradient for kernels mesh, but I can't seem to recreate the look of the ball at all. I tried to recreate it in a rectangle by using the option in the menu object (1 row, 50 columns) gradient mesh and I'm trying with the fusion in object mode, but not lucky yet. Can someone help to put me on the right track to make the texture:

  

  

  

  I've been slowly making progress with gradient for kernels mesh, but I can't seem to recreate the look of the ball at all.

  Tank,

  You have published three images stylistically very different. The first is photographic and call probably (but not necessarily) for graduates of mesh. The other two are graphical treatments (and frankly, they're both rather flat; lack of depth).

  Illustration style extends the range of cartoonish in sketchy photo-realism and all the rest. The problem is you didn't show your own attempt so that anyone can have an idea of what you're trying to achieve the stylistic point of view.

  I just need to put in place so that the final step does not appear the whole box. The problem now is trying to make the style of the good brush to reproduce the effect...

  You seem to think you have to build a kind of linear construction and then find a way to reshape the shape of each part of the leaf. Yes, you pouvez approach it this way, but Illustrator users has often tend to be what aunt Molly would call "too clever by half."

  Not everything must be something semi intelligent auto or complex and tedious consruct involving brushes, envelopes, masks, etc, etc. Much can be accomplished by thinking that he just thanks to measure you draw directly economic paths and constructions, which take no more time (often less) and result in very tidy, simple files. Again, a lot depends on what you are trying to achieve the stylistic point of view. But here's an example that only took a few minutes to draw:

  

  

  

  

  

  If the above consists of:

  Three roads closed, 8 points each, with ordinary linear degrees

  Three mixtures of open path with three anchor points for each key path

  Six paths closed for shadows / highlights, with 19 points in total

  Mixtures being directly from the paths drawn comic forms, the spacing of the veins 'automatically' and intuitively follows the width from point of view of the worksheet.

  Rather than to build a boilerplate brush, colouring and the weight of each of the three main paths of the vein mixtures can be set individually at any time, simply directly by selecting the key path.

  JET

• Speed/performance of my mac mini (mid-2010) is very slow. Need help, consolidate the files, software updates, etc. in order to improve the speed and performance.

  My mac mini (mid-2010) speed/performance is very slow - think of it as a result of letting my kids do "whatever" about it in recent years.  Need help, consolidate the files, software updates, etc. in order to improve the speed and performance.  You will also need to get data out of old PowerBook G4.

  < object edited by host >

  We are users like you.  Search locally by using something like Yelp or similar

  http://www.Yelp.com/search?find_desc=Apple+repair & find_loc = Chicago, + IT & start = 0 & ortby = rating s

  or read a few links which may be relevant on this forum about the slow mac mini

  http://BFY.tw/5C63

• Need help with the installation of an adapter of Palit GeForce 9500GT Super chart - 512 MB in a M2N68 (narrated

  Need help with the installation of an adapter of graphics Super Palit GeForce 9500GT - 512 MB - DDR2 SDRAM in a M2N68 motherboard (narra6). Should I disable the onboard graphics in the bios? When the card is installed, no VGA work outs and the PC does not start. Checked and recontroler implementation of the card in the PCI slot. PC is a desktop HP G5200uk PC. Windows 7 operating system.

  Hello

  The link below is a guige to install a video card in your Pc.  In particular, it seems that you will have to perhaps specify the location of the new card in the bios and save this change before you install the new card - see step 4 in the guide on the link below.  If your new card fits into the PCI Express x 16 slot, you will need to define PCI Express in the bios and save the changes.

  http://support.HP.com/us-en/document/c01700855

  Kind regards

  DP - K

• Satellite Pro A300-15V, I need help in the Organization of my startup list

  Hello everyone!

  I need help in the Organization of my startup list:

  (Why should Toshiba button support I this program if my laptop doesn't have multimedia keys? OR maybe this program for something else?)
  ItSecMng (although I have disabled the Bluetooth Manager to run when starting from this point still remains in the startup)
  Agent of filtering of Audio Conexant high definition (what is this program? Do I really need to start?)
  TOSHIBA Power Saver
  Toshiba Flash Cards
  RAID event monitor

  So, my friends. Could you give a valuable suggestion whether or not it is prudent to disable startup above entries? I want to speed up my laptop at the highest possible level.

  Thanks a lot for your time!

  Kind regards
  Osman.

  My laptop:

  Toshiba Satellite Pro A300-15V (PSAJ5E) => NOT have multimedia keys except the FN keys.

  > Toshiba Button support (why should I this program if my laptop doesn't have multimedia keys? OR maybe this program for something else?)
  You can disable it. If your mobile phone does not support the multimedia buttons then this tool is useless.

  > ItSecMng (although I have disabled the Bluetooth Manager to run when starting from this point still remains in the startup)
  I don't know what would make this process, but you can disable this in msconfig-> tab start Mr. If it would take in the future, then you could turn it on again.

  > Agent of filtering the Conexant high definition Audio (what is this program? Do I really need to start?)
  I think that this is necessary. It could improve your audio

  > Toshiba Power Saver
  This is important. It s an additional saving of Toshiba option for Win 7

  > Toshiba Flash Cards
  This tool controls the FN keys.

  > RAID Event Monitor
  Hmm so you don t have two hard disks, then you can try to disable it too.

• I need help to the new photo of my photos from iphoto on El Capitan. Any help would be appreciated.

  I need help to the new photo of my photos from iphoto on El Capitan. Any help would be appreciated.

  To migrate your iPhoto library to Photos for Mac, drag it in the Photos icon in the Dock.  Photos will read the iPhoto library and create a new library of pictures of him.

  Is your photo library in iPhoto on an external drive? The migration will work that if the external hard drive Mac OS extended (journaled) file system.  If the library is on a disk with a different file system, Ministry of the environment of the library of a correctly formatted disk.

• I need help with the program of Photos on my macbook pro

  I use a Macbook Pro with OS of Yosemite. I really need help with the Photo program. I never really got the hang of IPhoto and now that it's a new program, I'm really confused. Where can I go to learn this without waiting for the next workshop in a local store?

  Hi, I'm fighting to open same mine, making a new software update

• Need help with the button mute on my helmet XL-3000 of Microsoft Chat, please!

  Hi all!  Hope everyone is having a good TGIF!  If you use my helmet even, I need help understanding the region button mute in the middle of the rope.  The red light is on or off?  I suppose that if I hit the curve button with the microphone on this subject, and the red light, I'm turn off my mike?

  I did some tests with others on the phone calls.  Sometimes, some other hear me, sometimes they do not have.  BUT I NEVER HEAR THEM!  FOR MY WORK, IT IS IMPERATIVE THAT I MAKE CALLS TO OTHERS!  HELP PLZ!  Thank you very much and have a great wkend!

  Hello
   
  Please follow the links below to troubleshoot the computer.
   
  Method 1
   
  Connect one microphone, music player or other audio device to your computer
  
  http://Windows.Microsoft.com/en-us/Windows7/connect-a-microphone-music-player-or-other-audio-device-to-your-computer
  
  Method 2
  
  Step 1
  
  Troubleshooting: headsets
  
  http://www.Microsoft.com/hardware/en-us/help/support/troubleshooting/headset/microphone-issues
  
  Step 2
  
  Open the troubleshooting of Audio recording
  
  http://Windows.Microsoft.com/en-us/Windows7/open-the-recording-audio-Troubleshooter
  
  Method 3
  
  How to adjust the microphone volume
  
  a. click Start, type mmsys.cpl in the search box and press ENTER.
  b. in the sound dialog box, click the recording tab.
  c. click Microphone, and then click Properties.
  Note Make sure that the work appears under Microphone. If the job does not appear, click Microphone, and then click on set as default.
  d. the Microphone Properties dialog box, click the custom tab.
  e. select or clear the box amp Microphone.
  f. click the levels tab.
  g. set the volume to the desired level, and then click OK.
  h. click OK to close the sound dialog box.
   
  How to adjust the setting of the voice
   
  a. start the game.
  b. connect to LIVE (the Guide).
  c. click personal settings.
  d. click on voice.
  e. make sure that the recording volume level indicator records at a bar when you talk.
  f. click done.

  If you are still facing problems then, I would say that you contact support for Microsoft hardware for more direct intervention.

  http://www.Microsoft.com/hardware/en-us/support

  
  I hope this helps.
  
   

• Need help with the launching track pack for forza code 4

  Bought new Forza 4 and the lancer Track Pack code does not work, how do I get a code that is generated in the form I've already paid for it. Rank of loads of numbers and sent 10 s of emails but cant seem to get help.
  
  This is the help I get when the cat to an Ambassador xbox on xbox.com
  
  Terry wrote:
  Need help with the launching track pack for forza code 4
  The Xbox Ambassador says:
  Location of Ambassador of the community...
  The Xbox Ambassador says:
  Location of Ambassador of the community...
  The Xbox Ambassador says:
  Your question will be answered by an Ambassador of the Xbox. You have been connected to the Ambassador as a user Xbox [3]
  The Xbox Ambassador says:
  Hello
  Terry wrote:
  Hello
  The Xbox Ambassador says:
  Hey
  Terry wrote:
  just to be on the phone to xbox live support and was told to come here
  The Xbox Ambassador says:
  ok\
  The Xbox Ambassador says:
  What is your problem?
  Terry wrote:
  I bought the 4 for forza ansd 360 new sealed Christmas...
  Terry wrote:
  has got 2 codes that accompanies the game but the pack track code does not work
  The Xbox Ambassador says:
  Wow good
  Terry wrote:
  whenever I put in the code it says code redeemed
  The Xbox Ambassador says:
  I think the code is used. You must return to the retailer
  Terry wrote:
  I tried to, but since I already opened the case they will not accept
  The Xbox Ambassador says:
  Oh. No,
  Terry wrote:
  the code had been used or defective as I am the only person who has touched the game once opened, tried to enter the code when it is open
  The Xbox Ambassador says:
  Maybe it was auto bought?
  Terry wrote:
  so, how do I get another code generated track Pack if defective?
  The Xbox Ambassador says:
  I do not know.
  Terry wrote:
  bought the game new, so I get the track pack
  The Xbox Ambassador says:
  Oh. It's bad.
  The Xbox Ambassador says:
  I think that if you Exchange 1 code it will buy it
  Terry wrote:
  car pack code worked, starter pack did not work
  The Xbox Ambassador says:
  Oh.
  The Xbox Ambassador says:
  It's a bad
  The Xbox Ambassador says:
  BTW you have an evolution of the tests?
  Terry wrote:
  Yes, I want to? but more anxious to get a code object generated for this pack
  The Xbox Ambassador says:
  Hey if I help can u give me this game too?
  Terry wrote:
  ?????????????????
  Terry wrote:
  So is it possible to get a code for that time?
  The Xbox Ambassador says:
  Hey
  The Xbox Ambassador says:
  Yes.
  The Xbox Ambassador says:
  you need to contact them
  The Xbox Ambassador says:
  and tell them that the code is used.
  Terry wrote:
  I was told to come here? where can I go to get the code?

  Hi Terryg76,

  ·         What version of the operating system is installed on the computer?

  I suggest you to contact the game manufacturer for more help and information.

• I need help for the upgrade of my current system.

  I need help for the upgrade of my current system.

  I have SBS 2008 with (Exch 2007, SQL 2005, Sharepoint, backupexec 2010 for sbs) licenses.

  I want to make the larger environment using the following:

  (1) apply Virtualization

  (2) apply to the failover process (clustering)

  "(3) the environment must support adding server terminal server, ERP server, exchange server, domain controller, backup manager.

  Storage 4) that supports Raid (1 and 5)

  UTM excellent 6) that supports (SSL VPN, VPN Global)

  suitable backup solution 7)

  (8) good antivirus for clients

  my questions:

  (1) can you provide me with a good design for this environment

  (2) should I choose what operating system:

  Microsoft datacenter or company

  I know datacenter provide us the unlimited VM but needs per processor license

  so if I have two Grouped servers I want to buy 4 licenses

  and just 4 VMs per company license... to say that we have two servers and maintain 8 vms so wat happened if 1 goes down... How can I migrate the 4 virtual machines on the server failed to another server group... ? should I buy enterprise license?

  (3) if I get the SAN storage for data... How can I save this storage... should I get another SAN?

  (4) how can I upgrade SBS stad single server (windows standrad) without losing the licenses as Exch 2007, SQL 2005, sharepoint.is it a must to buy an edition full std server or there is a way to upgrade (license wise, I mean)?

  (5) what about win2k8 license for VM:

  lets say we have physical that has windows license so that enough to have windows for VM or should I buy windows for VM licenses?

  (6) can I use backExec license for SBS with windows 2008 standard

  (7) who better to virtualization AMD or INTEL

  (8) hyper V or VMware?

  (9) what of Microsoft data protection Manager... is this good?

  (10) what virtual machine manager? What are the benefites keys

  Thanks in advance

  Hello AnasAI,

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/