I need help to create a new partition of the drive c. main on my laptop
OK, I already tried to create a new partition and it did, but the new partition I created has become "unallocated" I don't know why, I have read the information online and they say that you cannot remove a player from the "unallocated" partition, so I am trying to create a new partition on this drive "unallocated". when its almost finished, I get warning all the time
the operation you selected will convert the disk from basic to dynamic disk selected s. If you want to convert the disks to dynamic disks, you will not be able to boot operating systems from any volumes on the s drive (except the current boot volume). Are you sure you want to continue?
I want to create a new partition on this disc, please help
When I click Yes, it brings an error message saying, the 'dynamic disks are not supported on this operating system.
I use Windows Vista Home premium
http://www.Vistax64.com/tutorials/95398-disk-management-shrink-partition.html
http://www.Vistax64.com/tutorials/95418-disk-management-delete-extend.html
Good info on above links.
Read the related links section, also.
Unallocated space is what it says it is: nothing.
Normally, you right click on your existing drive > extend the Volume > makes a great.
Or follow the instructions at the link above to make a second Partition to unallocated space...
See you soon... Mick Murphy - Microsoft partner
Tags: Windows
Similar Questions
-
Need help to create a new Xbox account
I deleted my Xbox Live account, a long time ago and I want to create a new. My old Xbox Live account is associated to my the Microsoft Account. But when I want to create an Xbox Live account, it says I have one using my that already have Microsoft Account. I'm sure I deleted my Xbox Live account and when I go on my Xbox Live account in the Internet, it says this, "Uh oh... that shouldn't happen." It seems that you have found a bug in the system. Please try again later. "I need help, I really want to create a new Xbox Live account using my course Microsoft Account. Thank you.
Hello
Your Question is beyond the scope of this community.
I suggest that repost you in the correct forum.
'Home'
"Xbox forums.
http://forums.Xbox.com/xbox_forums/general_discussion/f/3817.aspx
"Xbox Forums directory.
http://www.Xbox.com/en-us/forums
See you soon.
-
Need help with creating a new site-problem file Spry
I can't create a new DreamWeaver CS5 site - I get a warning message that the current Spry folder is not inside the site and select a valid file in the local directory. I tried creating a folder nothing is, so is unable to create the site. Help is appreciated.
An option if you're a Mac: your hard disk named?
http://forums.Adobe.com/thread/654548
Also try:
-
I'm new to the photo shop and I need help to create a new photo for a light effect
The direction towards the tutorial I am subsequently says "create a new folder name "light effect". Change its colorDodge blending mode and move the ellipse that you created in this folder. »
I have NO idea what the indications or the way to follow. Can someone please explain to me how to create a new folder, how do I change the blending mode to Color Dodge this issue and how to move an ellipse that I created for this folder. I'm new, so step by step instructions would be more then appreciated. Thank you!
http://Abduzeedo.com/amazing-Photoshop-light-effect-10-steps
Hello
The tutorial refers to work in the layers panel. Choose window > layers.
- A new folder is possible in the layers panel by clicking on the folder icon at the base of the Panel or by selecting "New group" of the fly of the layer menu panel.
- The folder can be renamed by double clicking on the name of the folder and enter the new name
- The blending mode is changed at the top of the Panel. By default, it reads 'Normal' or as folder by default, it reads 'Pass Through'. Click here to change to Color Dodge
- To move the ellipse layer folder drag the layer (in the layer panel) on the folder you created
Hope that helps.
Paul.
-
When I open my pc without inserting any player/CD flash bootable, the message "Reboot and select proper boot device or Insert Boot Media in selected boot device and press a key" appear on my screen. So, I decided to install an OS, but in creating a partition, an error: 0 x 80070017 pop up. Someone help me please, how do I fix this I have met now. Thanks for comments in advance. God bless you.
Create all the partitions once the installation is complete.
Boot from the Windows 7 DVD
Click Install now
Accept the license agreement
When the option is displayed to select a type of installation, click (Custom advanced)
Click on drive Options
Select the disc/s click on Delete
Click new
Click on apply
Click OK
Click Format, and then click next to proceed with the installation
-
Need help to create a rule to monitor the "DSDeviceTotalLatency" under "VMWDatastore".
Hello all, I am very new to vFoglight and tasked to create a rule to control the property 'DSDeviceTotalLatency' of type 'VMWDatastore' topology. Looking at existing rules, I see that I need to write a mini script on the tab 'Conditions and Actions '. The problem is that I do not know how to reference this property and the command to use to recover. Thank you in advance.
At, it is simple, can be as simple as:
scope of the rule to the VMWDatastore type on the tab 1
condition on tab 2:
If (#totalLatency # 10 >) {return true;}
return false
-
Please help me? ): !!!
Hello
go to the Web site of your router manufacturers and you will find the information to
or if a cd that came with your router, follow these instructions
-
Help me, create a new page of the current page TabbedPane
I want when I touch the tab on a new page. Here is my source:
hand. QML
import bb.cascades 1.0
TabbedPane {}
showTabsOnActionBar: false
Tab {//First tab
Text located with the dynamic translation and locale update support
Title: qsTr ("Blackberry") + Retranslate.onLocaleOrLanguageChanged
imageSource: "asset:///pic/ic_bbm.png."
ActionBar.placement: ActionBarPlacement.InOverflow
{Page}
actions:]
{ActionItem}
ID: action2
Title: qsTr ("About") + Retranslate.onLocaleOrLanguageChanged
imageSource: "asset:///pic/ic_info.png."
ActionBar.placement: ActionBarPlacement.InOverflow
}
]
title bar: title {} bar
Title: "a tab.
}
{Of container
{Label
text: qsTr ("first tab") + Retranslate.onLocaleOrLanguageChanged
}
}
}
} //End of the first tab
Tab {tab //Second
Title: qsTr ("Search") + Retranslate.onLocaleOrLanguageChanged
imageSource: "asset:///pic/ic_search.png."
ActionBar.placement: ActionBarPlacement.InOverflow
{Page}
title bar: title {} bar
Title: 'two Tab.
}
{Of container
{Label
text: qsTr ("second tab") + Retranslate.onLocaleOrLanguageChanged
}
}
}
} //End of the second tab
Tab {tab //Three
Title: qsTr ("Share") + Retranslate.onLocaleOrLanguageChanged
imageSource: "asset:///pic/ic_share.png."
ActionBar.placement: ActionBarPlacement.InOverflow
{Page}
title bar: title {} bar
Title: 'Tab three.
}
{Of container
{Label
text: qsTr ("second tab") + Retranslate.onLocaleOrLanguageChanged
}
}
}
} //End of three tab
}about. QML
import bb.cascades 1.0
{Page}
anyone ranging from property;
{Of container
verticalAlignment: VerticalAlignment.Center
horizontalAlignment: P
topPadding: 50
background: Color.create ("#000000")
ImageView {}
horizontalAlignment: P
imageSource: "asset:///pic/ducdaubb.jpg."
preferredWidth: 500
preferredHeight: 500
}
{Label
textStyle.base: SystemDefaults.TextStyles.BigText
textStyle.fontWeight: FontWeight.Normal
text: "Radio Indonesia."
horizontalAlignment: P
textStyle.color: Color.White
}
{Label
textStyle.base: SystemDefaults.TextStyles.BigText
horizontalAlignment: P
textStyle.fontWeight: FontWeight.Default
text: 'Version 20141.
textStyle.color: Color.White
textStyle.fontSize: FontSize.XLarge
}
{Label
textStyle.base: SystemDefaults.TextStyles.BodyText
horizontalAlignment: P
textStyle.fontWeight: FontWeight.Normal
textStyle.fontSize: FontSize.Large
text: "Copyright 2014-2015.
textStyle.color: Color.DarkGray
}
{Label
textStyle.base: SystemDefaults.TextStyles.BodyText
horizontalAlignment: P
textStyle.fontSize: FontSize.Large
text: "Devoloper by 1Pro.
textStyle.color: Color.LightGray
}
{Label
textStyle.base: SystemDefaults.TextStyles.BigText
horizontalAlignment: P
textStyle.fontSize: FontSize.XLarge
textStyle.fontWeight: FontWeight.Normal
text: qsTr ("http://radio.com.id")
textStyle.color: Color.create ("#087099")
Multiline: false
}
} / / Container
} / / PageThank you
You need NavigationPane if you want to push new page (average).
For example:
Tab { //First tab title: qsTr("Blackberry") + Retranslate.onLocaleOrLanguageChanged imageSource: "asset:///pic/ic_bbm.png" ActionBar.placement: ActionBarPlacement.InOverflow NavigationPane{ Page { actions: [ ActionItem { id: action2 title: qsTr("About") + Retranslate.onLocaleOrLanguageChanged imageSource: "asset:///pic/ic_info.png" ActionBar.placement: ActionBarPlacement.InOverflow } ] ...................
then in your page add ComponentDefinition to attachedObjects of the page
YourPage{ attachedObjects: [ ComponentDefinition { id: aboutPage source: "About.qml" } ] }
and finally, to push the new on the page.
ActionItem{ title: qsTr("About") onTriggered:{ activePane.push(aboutPage.createObject()) } }
It may be useful
For more information, see this
https://developer.BlackBerry.com/native/documentation/Cascades/best_practices/dynamic_qml/
-
Original title: getting the error while creating a new partition
here to create a new partition get the error "the operation you selected will convert the disc selected basic to dynamic disk... etc" Please help.
I would like to join the screenshot of the error, how?
Hello
1 have had any changes made on the computer before the show?
2. how many partitions are there currently on the computer?
3. how many hard disks on the computer do you use?
4. when exactly you get the error message?
I suggest you refer to the article and try to follow the steps and check if you are able to create a partition:
Create a new Partition on a hard disk in Windows 7
http://TechNet.Microsoft.com/en-us/magazine/gg309170.aspx
I also suggest you the link and attach a screenshot of the screen.
-
Setup could not create a new partition, new z510 non-OS and windows 7
Hello, I have a huge problem with windows install. Clean all the partition using windows install to create two partitions: 100 GB and GB 890. When I try to install windows I see:
Setup was unable to create a new partition or system to locate a system partition. See logs of installation for more information"
I put:
Configuration: Controller-> Compatible Sata Mode
Start mode: Legacy Supprt
Boot priority: first Legacy
Need help, help me.
SOLVED... I tried to install the USB drive... there couse a problem.
-
I have 3 drives hard, but windows 7 install only 2 (im of a facility in xp) see of them. The strange thing is that it can not see my HDD with xp on?
I tried to install it on others, but it says "Setup could not create a new partition system or locate an existing partition of the system" and hard drives are: 1 is logical, 2nd is system, 3rd is primary. WHAT SHALL I DO PLZ! I really need help!Hello
I suggest you to see link below and check if it helps.
Hope this information is useful.
-
Create the New Partition of the former created Partition
Mr President.
I use Windows XP SP3 OS with 4 Drives (C, D, E, F) hard partitioned. The size of my hard disk is 250 GB. I create forgettably drive E: Partition of greater capacity (Say 85 GB) memory space. The E: Partition holds about 35 GB of space free and remaining serve the space. I need to create the New Partition (G :) free space in the E: 35 GB Partition saying. ) The reason to ask for the help of the u. Please answer me as soon as possible.Hello
Make sure that you have free space in each drive for better performance. When free disk space reaches 200 megabytes (MB) or less in a car, you will be prompted to free space in the disk.
See the below items to create a new partition.
How to use disk management to configure basic disks in Windows XP
http://support.Microsoft.com/kb/309000How to partition and format a drive hard using the Windows XP Setup program
http://support.Microsoft.com/kb/313348 -
I had Windows Vista ultimate on my Dell Studio laptop which consisted of 3 partitions (OS, recovery and OME).
In order to complete a clean install, I deleted all partitions and create a new 1 and formatted it, but I am informed that the installation was unable to create a new partition system or locate an existing partition.
I tried in IDE and ACHI, but neither enable Sir to go beyond that. I am booting from the CD with Windows 7. If someone is able to help, they explain in layman's terms, as I am a relative novice.
Thank you
As the drive was provided by Dell, you need to talk with them.
The disc could be waiting to see the things that you have deleted.
It can also be a type of completely different facility than the normal installation of Microsoft discs.
You would have more than likely been OK if you would leave the formatting alone and partitoning.
-
Error: "could not create a new partition or locate a" when installing Windows via Boot Camp 10
This error occurs on my 2012 15-inch MacBook Pro. I have 2 hard drives. One dedicated to OSX and one for Windows. This is my first install bootcamp. I let bootcamp create partitions, but to the partition/disk screen hard to choose, I get a message saying: "we could not create a new partition or locate a.. The partition has been formatted to NTFS. I tried later in this guide community post here: error: "we could not create a new partition or locate and existing" install Windows via Bootcamp 8.1, but no luck. I even tried to delete the partitions and create a partition empty for windows so it can create and format on its own and start using EFI. At this point, windows begins to install it and restart, but it fails during the part material recording and restarts. Then when it starts again I get a message that the installation has failed.
Here's some output terminal which can help you to (I) hope.
Blakes-MBP:~ blakeleeper$ diskutil list /dev/disk0 (internal, physical): #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *500.1 GB disk0 1: EFI EFI 209.7 MB disk0s1 2: Apple_CoreStorage Macintosh HD 499.2 GB disk0s2 3: Apple_Boot Recovery HD 650.0 MB disk0s3 /dev/disk1 (internal, physical): #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *320.1 GB disk1 1: EFI EFI 209.7 MB disk1s1 2: Microsoft Basic Data 319.9 GB disk1s2 /dev/disk2 (internal, virtual): #: TYPE NAME SIZE IDENTIFIER 0: Apple_HFS Macintosh HD +498.9 GB disk2 Logical Volume on disk0s2 27D631AE-27C5-4E4B-98BC-92CE944ED60B Unlocked Encrypted /dev/disk3 (external, physical): #: TYPE NAME SIZE IDENTIFIER 0: FDisk_partition_scheme *16.0 GB disk3 1: DOS_FAT_32 WININSTALL 16.0 GB disk3s1 Blakes-MBP:~ blakeleeper$
You must disconnect the internal bus 500 GB SATA drive and use a flashdrive USB2 for OS X from startup. The 320 GB designated drive must be in the main Bay of the Mac. Once Windows is installed, reconnect your 500 GB drive in the Optibay (if you this road main Bay) will be Windows blue screen in most cases.
-
recovery system after creating a new partition
Product number: A6Y43UAR #ABA
Name: HP Pavilion g6-1d38dx Notebook PC
OS: Windows 7 64-bit
My hard drive is shipped with a factory setting of 4 primary partitions. I would like to remove one of the partitions in order to create a new primary partition using this guide (jump to option I content):
My goal is to create a new partition D where I store all my data so that something happened to my operating system that is on the C drive (viruses, etc.), all my data will be safe in the drive D. I hope that running the system recovery HP (using the f11 key) will not remove the user created the D partition and the data in it , but that's where my confusion. The guide above says the following on this subject:
"Remember that if you decide to use the recovery discs or the F11 option to restore the PC to its original state, all partitions that have been created by you will be lost and will also lose all data that was stored on them."
However, another document which is the HP system recovery guide, says the followingYour computer can have three types of available system recovery, or he might have only two. Use the type of recovery in order to solve your problem without making further changes as necessary.
If you don't have 3 options in the recovery then Yes, System Recovery Manager will delete all partitions and restore the original configuration.
To better protect your files an external USB hdd is a good investment of backup. You can also use it to make a System Image of your hard drive that can be used to restore windows and all software/drivers if you need to reinstall. 1 > guide 2 > guide
Maybe you are looking for
-
Could not start the recovery CD
Hello Can someone help me?I am recovering my Satellite A100 using the recovery media of the product supplied with the laptop again. I place the disc in the dvd/cd drive, turn on the machine and using F12 select boot from CD/DVD drive. After that, the
-
Bluetooth on Satellite P100 - how can I put it to "always receive"?
Evening chaps - I have never posted on these boards before because I've never really had the need, I've done very well solve the problems in the past by looking around. The people here seem pretty useful and all the advice was clear and useful. But n
-
I try to use a bluetooth with my HP Pavilion g7-2275dx Notebook PC speaker, but I don't know if I have the ablility to do this? I have the ralink bluetooth stack and and a driver atheros bluetooth but I don't know how to use them. Also, sometimes I c
-
HP-H8-1140sc: upgrade my motherboard help
Hello. I bought a new MSI Nvidia gtx 960 and I want to install on my pc, after checking on the net, I found on my card HP mother IPISB-CH2 is not able to run under its not with the 3.0 update. I'm ready to upgrade my motherbaord but I understand that
-
Code error WinDef 8050800c and system restore Error 80070002 are related
Hi all During the last weeks of twoo many discussion happened for WinDef - and MSE-error 8050800c. The problem known inside this WInDef cannot scan or update at required intervals, created havoc and thousands of users are complaining about and at th