I need help to set up my wireless router

When I insert the CD to install the Wireless G Broadband Router (linksys by Cisco) the installation process does not start automatically - what should I do?

I have Windows Vista

Thank you

Bonnie

Hello

·          You are to return to the AutoPlay feature in Windows Vista?

I suggest you to enable the auto-play feature and then check.

Change AutoPlay settings

http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

You can also contact the manufacturer for assistance on this issue.

http://homesupport.Cisco.com/en-us/wireless/LBC/wrt54G

See also:

AutoPlay: Frequently asked questions

http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions

Troubleshoot AutoPlay

http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

Tags: Windows

Similar Questions

  • I just reinstalled windows xp sevice pack 3 in my laptop. l need help to set up the wireless modem. My laptop is IBM ThinkPad.

    I just reinstalled windows xp sevice pack 3 in my laptop. l need help to set up the wireless modem. My laptop is IBM ThinkPad and the modem is a construction in one. would appriciate ay help

    Hi bardhiboris,

    You can follow the steps from the link below: set up a wireless network:http://www.microsoft.com/windowsxp/using/networking/setup/wireless.mspx

    Other links, please refer to: 10 tips to help improve your wireless network:http://www.microsoft.com/athome/setup/wirelesstips.aspx

    To set up automatic wireless network configuration:http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/wlan_client_configure.mspx?mfr=true

    With regard to:

    Samhrutha G S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • need help to set up Linksys printserver with verizon wifi hotspot

    need help to set up Linksys printserver with verizon wifi hotspot

    pfsjmhall,

    Configure your wireless router to use these recommended wireless router settings, I use channel 11. I would use a new SSID to connect easier.

    Then configure the Linksys print server. Find your network to give your passkey (password)

    Then set up the printer, choose network and follow the instructions.

    Rick

  • Need help with setting up in checkbox in interactive reports

    I need help with setting up in checkbox in interactive reports, I use this statement a query

    SELECT apex_item.checkbox

    (

    1, ROLEID,

    'onchange = "spCheckChange (this);". ',

    : F_ROLEID_LIST,.

    ':'

    ), del.

    ROLEID, ROLEDESCRIPTION

    OF EBA_ROLES

    When I run it I get the following

    < input type = "checkbox" name = "f01" value = "1" onchange = "spCheckChange (this); ' / > instead of the checkbox

    Do I need to configure anything else

    Aditya Gupta wrote:

    I need help with setting up in checkbox in interactive reports, I use this statement a query

    SELECT apex_item.checkbox

    (

    1, ROLEID,

    'onchange = "spCheckChange (this);". ',

    : F_ROLEID_LIST,.

    ':'

    ), del.

    ROLEID, ROLEDESCRIPTION

    OF EBA_ROLES

    When I run it I get the following

    instead of the checkbox

    Do I need to configure anything else

    This is one of the most frequently asked questions in this forum. Set the column attribute the text to display as Standard report column and not display text (special escape characters).


    Always include the information referred to in these guidelines when you ask a question and if you use APEX 5.0, State, if you develop using the pages or the view of the component designer.

  • Need help to set up: 2 different wireless with SSID 2 routers on the same network

    Hi all:

    I read on the forum trying to find the answer to this question, but have not found a very clear answer that satisfies all my requirements autour.  An explanatiion more in depth.

    I have 1 IP coming via cable modem.  I want to configure two wireless routers (one secured with WPA-TKIP and a non-secure network - a 'guest' If you want to) each with different SSID.  The secure network would be for my server, PC home, webcams IP, DynDNS, update; While having an unsecured wireless router that friends and family can access.  Ideally, I don't want any person who accesses the router unsecured wireless to access my secure network.

    Is someone can you please tell me if this is possible.  I think that it is based on some posts, I've seen, but specific details about how to do this would be appreciated.  In addition, my DynDNS must always be able to be updated with the IP of my ISP so that I can access my server and webcams home.

    MATERIAL

    2 WRT54G

    1 EZXS55W

    1 WVC200

    1 WVC54GC

    (all my stuff - webcam, dyndns, server, etc. - working on my secure network.) I just need to add the non-secure network)

    I know it's a lot, but I'd appreciate any help.  Thank you.

    You must be connected to the modem router WRT54G main. Set up the network secure on the main router wireless. Connect all of your computers or wireless devices for the main secure wireless network.

    Consider that the IP address of the main router is 192.168.1.1.

    Now connect a single computer to Port 1 on the second router wireless.

    Open the second wireless router configuration page. Settings wireless SSID, unsecured.

    Change the IP address of the second router 192.168.2.1. Save the settings.

    Connect the cable from the Ethernet port on the main router to the Internet second port router wireless.

    The second power cycle wireless router.

    Now the host computers connected to the second network unsecured wireless Wireless will be able to access the Internet only. They will not be able to see the computers or devices connected to the first router.

  • need help to set up time capsule as a backup only

    I used Time Capsule as a router wifi and backup for several years.  The wifi didn't give me the whole House coverage so I bought the mesh network eero newly released product. I still want to use my Time Capsule for backup and, as he already has about two years of backup on this subject, I don't want to lose these backups. I created a new network for eero routers but gave the network of the same name and password as the old TC network so that all my devices would automatically connect to the new network.  That has worked well.  Is it possible to connect the time Capsule to the my wireless network so that my MacBook and MBP my wife will continue to save on the network they were?  The eero router has two Ethernet ports on the back and the two are to be used (one for the modem, the other for Sonos) so I do not have an available port to use.  Can I buy a switch if I have to, but if there is a wireless solution I would rather.

    I also have a desktop Mac that has saved on the TC and it's my main computer.

    Thanks a lot for your help.

    Is it possible to connect the time Capsule to the my wireless network so that my MacBook and MBP my wife will continue to save on the network they were?

    No, you cannot join the TC now network a wireless router not apple. Apple has removed this feature because he was too... too slow, unreliable and missing too many apples.

    The eero router has two Ethernet ports on the back and the two are to be used (one for the modem, the other for Sonos) so I do not have an available port to use.  Can I buy a switch if I have to, but if there is a wireless solution I would rather.

    You can run the TC between eero router and the sonos.

    Connect the wan port on TC eero and Sonos to the TC lan port. Configure the TC in Bridge mode. Disable the wireless sound. (Or you can leave the wireless on but use a different name for your eero wireless now).

    The TC will work like a switch... this side of it will work fine.

    How well the works of TC depends on the OS everything works... You can find it is actually necessary to paginate on the TC to make backups of the laptops wireless. Apple has made changes to the DNS system that broke network so that it can be impossible for computers discover the TC after a few hours after a reboot.

    Give it a try... If this does not work then you need to be more creative.

    The TC can connect through ethernet in the desktop computer. But for this, it must be configured with a different range of IP addresses for the rest of the network. Again, you can use wireless on... but the laptop will have to make backups by a different method. It gets complicated very quickly.

    Tell me what IP range using the eero router?

    I can make a few suggestions more as soon as we clear.

  • Need help to set up parental controls

    Hello

    I want to set up parental controls on my son's laptop computer.

    Thus, users are

    His name

    Director of comp.

    Password protected

    not monitored by family safety

    I thought that I could not / would not set up on the administrator, so I created a second user

    His name1

    standard user - control parental on

    no password

    monitored by family safety

    I have implemented controls, but they are not in force, I guess, because they should be on his main user? If this means that it can change the settings since this is admin?  I'm confused :(

    Hi Dee2537,

    We are happy to help you set up parental controls in your son's laptop computer. Given the information you have provided, we see that you addressed some of the scenarios where parental control will not work correctly. One of it is implemented in your child as an administrator's account. Family safety not restrict and recognize the account as a child, if the application detects that it is using an administrator account. The other implements access to his account without password because Family Safety requires that the user has a password to secure the account. Because you have pain to configure the account correctly, we strongly recommend that you follow the instructions step by step on how to set up on behalf of the child in the family security and laptop to your son.

    Here is the link where you can find the complete steps: setting up parental controls

    Please let us know if you need more help and we will help you the best we can.

    Thank you.

  • I need help to set up the linksys adsl router

    Hello world!

    I have LINKSYS WIRELESS - N HOME ADSL2 + MODEM ROUTER (wag120n) and I connect to the internet via the cable that I took my friend who already SPEEDTOCH ADSL ROUTER, I bought the d-link wireless card and I install it in one of my PC
    what I need is to set up my linksys wireless router for my two PCs, on via the wireless and another an ethernet cable, how can I do?

    thanks4all

    Follow this link to configure the router.

  • OfficeJet 6500, need help to connect to it wirelessly!

    Help! I somehow found like the guy from the 'IT' to my business even though I'm not really a computer guy, I'm just a guy. We have an Office Jet 6500 e709n, and I need two laptops to be able to print to it wireless.

    I have read both of these threads that cover the same subject,

    http://h30434.www3.HP.com/PSG/board/message?board.ID=networking&thread.ID=3366

    http://h30434.www3.HP.com/PSG/board/message?board.ID=networking&thread.ID=3064

    but this still does not work for me. Both the printer and the laptop are connected to the same wireless router. When I try to print, I just get no response from the printer at all and just the document in the queue.

    Another obstacle is that when you run the install disc, I get a message saying "the specified service does not exist as an installed service."

    Oh, I should maybe mention that the printer works fine when the USB is connected.

    Sequip,

    My problem was solved just in the other forum.  It had to do with the netdevicemanager is not loaded on my system.  Check out the following thread and see if that solves your problem.

    http://h30434.www3.HP.com/PSG/board/message?board.ID=install&message.ID=7688&jump=true

  • Need help to set up voice VLAN in SG300

    Hello

    I spent too much time on it now and need help. I'm trying to set up a voice switch VLAN on a SG300 - 28 p. I need to charge a phone Cisco 7965 connected to a port on SG300 - 28 p to use VLAN 100, and a workstation connected to the phone to use Cisco 7965 on VLAN 101 by SG300 - 28 p. In the common Cisco IOS switches, this task is configured as follows:

    interface gi25

    switchport mode access

    switchport access vlan 101

    switchport voice vlan 100

    Trying to achieve this scenario with a Cisco SG300 switch turns into a nightmare. You will have to deal with a Dynamic of VLAN voice Auto Voice VLAN mode. Then, you must have a configured trigger and activated Automatic Smartport . I tried to do this in CLI nothing helps. Cisco 7965 receives an IP address of the access VLAN on Gi15 interface, which is 101 VLAN. I need to receive an address IP of the VLAN 100.

    The current configuration under Gi15 interface is as follows:

    interface gigabitethernet15

    activate the storm control

    broadcast storm control level kbit/s 10

    Storm-control include multicast

    port security throw trap 60

    maximum port security by 10 points

    port security mode max-addresses

    spanning tree portfast

    LLDP-med disable

    switchport mode access

    switchport access vlan 101

    ! next order is internal

    macro auto smartport dynamic_type unknown $native_vlan 101 $voice_vlan 100

    Now, I don't know how the macro auto smartport dynamic_type unknown $native_vlan 101 $voice_vlan 100 command in the config, and I do not know how to remove it.

    When I try to enter the command macro auto smartport type ip_phone_desktop under Gi15 interface, I get the following error message:

    The $voice_vlan macro setting is not configurable by the user

    It seems that the auto attendant smartport macro ip_phone_desktop can not apply the setting $voice_vlan with a value of 100. In fact, I explicitly does not use this parameter to everything in the order of macro auto smartport type ip_phone_desktop ; However, the SG300 switch knows that the voice VLAN VLAN 100, and he's trying to use this VLAN ID as the value of the $voice_vlan parameter, the macro fails.

    I tried statically configure the voice VLAN on the switch SG300 using the command id of the vlan 100 voice , but I couldn't get the ip_phone_desktop macro to configure interface Gi15 correctly. Then, I removed the command id of the vlan 100 voice and obtained SG300 to learn his voice VLAN ID of UC560 connected to the SG300 through a trunk port based on the port configuration (connected to SG300) for the trunk of the next UC560:

    switchport trunk vlan 101 native

    switchport mode trunk

    switchport voice vlan 100

    Cisco-switch macro description

    This is the command switchport voice vlan 100 who announces to SG300 via CDP VLAN 100 is a voice VLAN. When I run the command show vlan local VoIP on the SG300, I get the following result:

    VLAN ID - VPT DSCP Source MAC address Interface

    1                    5          46       default           ----                    ---

    * 100 CDP e0:5f:b9:xx:yy:zz gi28

    Thus, it is clear that the SG300 receives information from UC560 via CDP in port Gi28 VLAN 100 is the voice VLAN. However, I can not always apply the ip_phone_desktop macro to SG300 Gi15 interface.

    Also, I tried to set up vState ofoithis vlan auto-déclenché as well as the commands in global configuration State vlan automatic voice activated mode. Or setting changes anything view voice VLAN announced at Cisco 7965 where Cisco 7965 continues to use VLAN101 (access the VLAN assigned to the interface Gi15).

    Hello telecastle,

    The Macro just get in the way most of the time. A default state on the switch a user will set the id of the vlan voice with orders

    (config) #voice vlan id 100

    * This will create the vlan 100

    VLAN, VoIP? * You can use to change your defaults for dscp and cos a long with all the other settings.

    State of vlan (config) enabled automatic #voice

    (config) #interface rank fa1-24

    (config-if-range) #switchport trunk vlan 101 native

    trunk (config-if-range) #switchport allowed vlan add 100

    * This function will define the vlan native on the trunk to 101 for the data port and vlan tagged will be 101 for the voice.

    CDP is enabled automatically and should learn the features of the phone and get on the phone to the vlan 101 on this port.

    CDP of the UC should automatically fill in the switch of the SG. You may need to upgrade the switch to the latest firmware however. Also make sure that the DHCP server for the voice if the CPU must be configured accordingly.

    Let me know if this helps.

    Cisco Small Business Support Center

    Randy Manthey

    CCNA, CCNA - security

  • Need help to set up AP 1142 standalone

    Hi all

    Need help. I am trying to configure Cisco Aironet 1142 standalone, this access point has been previously connected to WLC and the previous post, I found that we need to delete and reload the AP

    private-multiple-fs, c1140-k9w8 - mx.124 - 21A .JHA

    Now when I try to configure the IP address for the AP, he is in error:

    Ip address of AP1142 #lwapp ap 10.61.1.151 255.255.255.0
    ERROR! Command is disabled.
    AP1142 #.

    Current flash content:

    AP1142 #dir
    Directory of flash: /.

    2 - rwx 10264 March 1, 2002 01:25:57 + 00:00 private-multiple-fs
    3 - rwx 90396 March 1, 2002 01:18:04 + 00:00 event.log
    drwx-5 128 1 March 2002 00:12:24 + 00:00 c1140-rcvk9w8-mx
    8 - rwx 0 March 1, 2002 01:26:06 + 00:00 config.txt
    9 - rwx 337 March 1, 2002 01:18:04 + 00:00 env_vars

    total 32385024 bytes (30019584 bytes free)
    AP1142 #.

    Please let me know whatelse is required for the configured in stand-alone mode access point.

    Thanks in advance

    The image that is on the device's LWAPP, not the autonomous... If you want to use the AP autonoous mode then the image must be W7... It's...

    C1140-k9w7 - mx.124 - 21A .JHA not c1140-k9w8 - mx.124 - 21A .JHA.

    Please feel free to download any image from the below link and perform the conversion of image LWAPP to stand alone...

    http://tools.cisco.com/support/downloads/go/PlatformList.x?sftType=IOS+Software&mdfid=282439881&treeName=Wireless&mdfLevel=Model&url=null&modelName=Cisco+Aironet+1140+Access+Point&isPlatform=N&treeMdfId=278875243&modifmdfid=null&imname=&hybrid=Y&imst=N

    the methos to convert is...

    Download TFTPd32 of google and install it on your PC... point of the image that you downloaded on the TFTP server.

    Connect a cable ethernet between your notebook and AP... both should be on the same subnet... Connect a cable from the console and access the hyperterminal console with the command...

    AP > en

    AP #debug lwapp console cli or debugging console cli capwap

    T AP #config

    AP (confg) int FA 0

    AP(confg-IF) ip addr (same subnet as the laptop)

    End AP(confg-IF)

    Force - reload DOWNLOAD - AP #archieve sw / overwrite tftp: / /.

    This will solve the problem...

    Concerning

    Surendra

  • Need help, cannot set references to Photoshop.Application in VBA

    Hello

    I've used CS5 in the past and have had a VBA program works well (running in Access 2010) which went very well, open Photoshop 32-bit and controlled photoshop CS5 normally, allowing me to manipulate photos, read metadata, etc.  (It was my understanding that at least for CS5, programs including VBA script necessary to run the 32-bit version of Photoshop, not the 64-bit version).

    About 6 months ago, I installed CS6 and VBA program continued to work perfectly, as it always opens the 32-bit version. (I had to be sure that I was not running 64-bit Photoshop when I started the VBA program).  CS5 was still installed but not used.

    I just uninstall CS5, leaving CS6 installed.  For some reason, he left the program VBA disturbed in that the references (that you set in the window of the VBA code with tools > References) no longer seem to be valid.  I can't set a new reference to Photoshop.Application, and the program became unusable.  In other words, the "references" list is more typotheque Adobe Photoshop CS6 or Adobe Photoshop CS6 Object Library.  I've traveled to the C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit) \TypeLibrary.tlb file to add this reference manually.  The programs does not yet compile (for example, appRef As New Photoshop.Application Dim causes an error "User Defined Type not defined").  I get the same failure to compile if I search for and install a reference to the 32-bit version, C:\Program Files (x 86) \Adobe\Adobe Photoshop CS6\TypeLibrary.tlb.  In the past, I also had a reference to the 'Adobe Photoshop CS6 Object Library".  I tried manually to C:\Program Files (x 86) \Adobe\Adobe Photoshop CS6\Photoshop.exe or the 64-bit version of Photoshop.exe, but these files are not accepted and I do not otherwise know the location of the file from the object library.

    I so need help from someone who knows how to solve this problem in the transition of CS5 at CS6 to use VBA.

    Thank you

    EGibbon

    There are global keys which crushed with every version of Photoshop. Photoshop.Application gets for example set for each installation of Photoshop. When you have uninstalled CS5 these keys got deleted.

    You can install CS6 again? You don't need to uninstall. Just install again if it will let you.

    I have a script that wil set them, but I don't really like to use it on other machines of people as it messes with the registry and I don't want to make it worse for you.

  • Need help to set a DELETE statement.

    I have a table that contains the records of files. Files come in a bouquet each week. So, we need to delete records from a table to the corresponding fields and load the table with up-to-date data.

    In doing so, the DELETE statement takes a long time. Need help with this setting.

    Here are the details.

    (1) total number of records in the table: 23 million records.
    (2) approximate records deleted each time: 500 K to 1.5 million.
    (3) table is partitioned on a PERIOD key. That is, each partition will have the data for a given period.
    (4) table is not indexed
    (5) removal occurs on a combination of 2 fields (PERIOD + BATCH).

    Here is the query and the plan:

    ===========================================================

    SQL > EXPLAIN PLAN SET STATEMENT_ID = 'TSH' FOR
    2 REMOVE / * + PARALLEL(DETAIL_UNKNOWN,10) * / u DETAIL_UNKNOWN
    3 WHERE u.FLBATCHID = 'PCAFRINTERMAR1105' AND u.N_PER6 = 201214
    4;

    He explained.

    SQL > SET LINESIZE 130
    SQL > SELECT * FROM TABLE (DBMS_XPLAN. DISPLAY ('PLAN_TABLE', 'TSH', 'ALL'));

    PLAN_TABLE_OUTPUT
    ----------------------------------------------------------------------------------------------------
    Hash value of plan: 2400300449

    ----------------------------------------------------------------------------------------------------
    | ID | Operation | Name | Lines | Bytes | Cost (% CPU). Time | Pstart. Pstop |
    ----------------------------------------------------------------------------------------------------
    | 0 | DELETE STATEMENT. 596K | 12 M | 838 (9) | 00:00:12 |
    | 1. REMOVE | DETAIL_UNKNOWN |
    | 2. SIMPLE HASH PARTITION | 596K | 12 M | 838 (9) | 00:00:12 | 6. 6.
    |* 3 | TABLE ACCESS FULL | DETAIL_UNKNOWN | 596K | 12 M | 838 (9) | 00:00:12 |
    ----------------------------------------------------------------------------------------------------


    PLAN_TABLE_OUTPUT
    ----------------------------------------------------------------------------------------------------
    Name of the query block / Alias object (identified by the operation identity card):
    -------------------------------------------------------------

    1 LED$ 1
    3 LED$ 1 / U@DEL$1

    Information of predicates (identified by the operation identity card):
    ---------------------------------------------------

    3 - filter("U".") FLBATCHID '= 'PCAFRINTERMAR1105' AND 'U'." N_PER6 "= 201214)


    PLAN_TABLE_OUTPUT
    ----------------------------------------------------------------------------------------------------
    Projection of the column information (identified by the operation identity card):
    -----------------------------------------------------------

    2 - (cmp = 2, 3) "U". ROWID [ROWID, 10], "U". "N_PER6" [NO.22], 'U' "." " FLBATCHID ' [VARCHAR2, 20].
    3 - « U ». ROWID [ROWID, 10], "U". "N_PER6" [NO.22], 'U' "." " FLBATCHID ' [VARCHAR2, 20].

    27 selected lines.

    ===========================================================

    Need your suggestions on how the query / table can be tuned.

    Hi Anand,

    I wanted to check why your tkprof Watch report two executions of the statement:

    call     count       cpu    elapsed       disk      query    current        rows
    ------- ------  -------- ---------- ---------- ---------- ----------  ----------
    Execute      2   2315.71    2480.17          0       3351     624489      611765
    

    In fact, it there was only a single execution of the DELETE statement. The trace file begins with a call EXEC of any statement without call analysis

    *** TRACE DUMP CONTINUED FROM FILE XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX_ora_241708.trc ***
    
    EXEC #1:c=20000,e=13996,p=0,cr=0,cu=0,mis=0,r=0,dep=0,og=0,tim=32472879711702
    =====================
    PARSING IN CURSOR #2 len=68 dep=0 uid=72 oct=42 lid=72 tim=32472883567994 hv=740818757 ad='0'
    ...
    

    TKProf aggregates this EXEC call with call EXEC of the DELETE statement because they have the same location of cursor (#1), he thinks it was the same cursor.

    PARSING IN CURSOR #1 len=93 dep=0 uid=72 oct=7 lid=72 tim=32472889974030 hv=1242910589 ad='e5979d80'
    DELETE from detail_unknown where n_per6 = 201214 and FLBATCHID = 'PCAFRINTERMAR1105'
    END OF STMT
    PARSE #1:c=0,e=11462,p=0,cr=0,cu=0,mis=1,r=0,dep=0,og=1,tim=32472889974024
    ...
    EXEC #1:c=2315710000,e=2480213492,p=0,cr=3691,cu=624489,mis=0,r=611765,dep=0,og=1,tim=32475370187626
    

    So, the question about two executions is closed - there was only a single run.

    The performance - 2315,71 seconds of time processor is absolutely huge for such amount of work. It looks like a bug.

    First, I propose to check the time without compression. If your environment allows this kind of testing try to decompress the partition and re - run on unpacking data DELETION.
    10.2 find the name of the partition

    select partition_name
      from dba_tab_partitions
     where table_name = 'DETAIL_UNKNOWN'
       and partition_position = 6
    

    After that

    alter table DETAIL_UNKNOWN modify partition  nocompress;
    alter table DETAIL_UNKNOWN move partition ;
    

    and run again the button DELETE.

    What is the operating system on the server?

  • Need help on the issue with wireless connectivity on Win7 - dynamic key exchange did not within configured time

    Hello

    I get below error when you try to connect to the wireless router. It was working fine until a few days back.

    InterfaceGuid {1F8AA774-8AE0-48BA-87EB-5522A6070F3E}
    InterfaceDescription Dell 1540 802.11a/g/n (2.4 GHz/5 GHz) Wireless
    ConnectionMode automatic connection with a profile
    BSSType infrastructure
    Key exchange dynamic FailureReason failed within configured time
    Used 294917
    ConnectionId 0x9

    What is the reason code 294917?

    Any help to solve the problem would be useful.

    Kind regards

    Srinivasa

    Hi Richard,

    Thanks for the quick response.

    I tried diff incl. power options. Nothing has worked.

    Finally, I reset my router unit today and it works now.

    Hope that this issue would not yet :-)

    Kind regards

    Srinivasa

  • need help to set the access rights of a vmware server 2.0.1 on vmware image

    Hello!

    I have a vmware (running ubuntu server 9.04) image that was created with a vmware server installation varsion 1.0.9. now I decided to upgrade to the host, which means that the host totally changed: new equipment, new OS, new vmware-server-version: 2.0.1

    My problem atm is, I may not know, what would be the appropriate access rights (chown/chmod) for this vmware image. during the installation of vmware server 2.0.1 I was asked to specify some 'administrative user' where I took the an im working with Linux itself (lets call it "user").

    so, when I copied the old vmware image in the data store (/ var/lib/vmware/VirtualMachines for me), chown-ed the folder including all files init by A, setting chmod to something like 600, the console vmware (web surface) told me that there were several problems with the image and couln can't be started etc. etc. etc...

    I played with several rights to the image and the only thing that seemed to help was setting the folder and all files included in 'root' with the command chmod chown '777'... not what I would call 'secured '.

    so: how to set the access rights for the virtual machines? I want that they have only minimal rights as possible and especially nothing like root: 777...

    My static VM files, as in those who are not dynamically created when the virtual machine starts, are the property of root, root of group with permissions of 711. Root is the user that I have chosen as the admin user when you run vmware - config.pl. My users do not have direct access to this server, so I'm not too worried about the permissions. You can give different rights for different users to different virtual machines, creating roles and their allocation to users/groups. On that, the details are in Chapter 10 of the user guide - http://www.vmware.com/pdf/vmserver2.pdf.

    Guy Leech

    VMware vExpert 2009

    ---

    If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

Maybe you are looking for