I need help with a speed of deletion noy know how to fix
am not very good at this, need help, delete button is so slow that it doesn't work as before
What is your anti-virus software?
Tags: Thunderbird
Similar Questions
-
I need help with my computer Windows 7 freezing. How can I stop this?
This just happened to me because my computer has been built up and tested in the last month. I was in the middle of work on an assignment for the class online and just froze. I couldn't use the mouse or keys and was forced to hit the reset button on the front of my computer. I use Windows 7 Ultimate with all updates. I have the Intel Core i5 quad core processor and PCI Express card Asus Geforce GTX 550Ti 2.0 and 4 GB of memory hardware. It is the copy of the event viewer. I will list all the codes that concern as well. This is the entire code format: (this has happened before, so I need to know why it happened and how I fix so it does not happen.) Thank you very much for your help! Ernie Mink
Hi Ernie,.
You get a Blue Screen of Death (BSOD) error?
A 41 event is used to signal that something unexpected has happened that prevent Windows to close properly. This problem may be caused, if some hardware drivers are not updated.
I suggest for the link and follow the steps in the article based on different scenarios.
Of core Windows event error ID 41 'the system has rebooted without cleanly close the first' in Windows 8, Windows Server 2012, Windows 7 or Windows Server 2008 R2
http://support.Microsoft.com/kb/2028504
See also:
Crashes Windows or freezes
http://support.Microsoft.com/kb/2681286
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.
-
I have problems with the facebook or social networking widgets. I would like the link to send viewers to my facebook business page, but when a test it shows my pic and a 'switch' sign (see screenshot) and when I opened the site, the message is as another screenshot, great, but I don't know where to find what "asset" is the problem and why. Also why have child pages if the menu reflects that? I see that drop down menus are a problem, also with some other members of the forum.
Thanks for any help offered!, I think I have solved the first problem now but still would appreciate any help with the other 2!
For some reason any the facebook widget now load the right page and I give up on the drop down menu, I hope that this issue will be resolved in the next update of Muse?
Hello
For the issue of the "asset", try to locate assets in the active panel. It must have an icon like this: http://jingsite.businesscatalyst.com/jing/2013-12-16_0917.png
For children in the edition of menu pages, go to menu options (by clicking on the small blue arrow in the upper right of the menu), and then change the type of menu to 'All the Pages' instead of 'high level Pages '.
I hope this helps.
See you soon
Parikshit
-
Need help with the GREP search delete numbers
Hello everyone,
I have the text with the following reference numbers, I need to remove the numbers before each start of paragraph, but some figures following the space, some of the figures are without space. Please help me remove these figures with GREP or MS Word search or other meansBefore:
1 Apple
2Ant
4 animals
55 flowers
56Doctor
466 painters
467Teacher
After:
Apple
Ant
Animals
Flowers
Doctor
Painters
Teacher
Thank you
SivaTry this GREP and replace it with nothing:
{^ \s{0,}\d+\s{0,}
-
Need help with setting wrong and impossible to find ways to fix
Hello
I just installed LM and imported photo. However, I might accidentally click on a few buttons and all the picture in the section developing shown like this. They appear with weird colors (color incorrect). I guess that it maybe because of some settings, but I can't understand that one. Please see the example in this picture (has not edited anything yet). Could you suggest how to correct the adjustment? Thank you very much for your help.
Go to Preferences, click the performance tab, and then uncheck the box.
-
I'm suddenly needing help with my browser Firefox (6.0.2)
Hello
I'm suddenly needing help with my browser Firefox (6.0.2)(OS: I use Windows XP).
When I open the browser, I don't see is a totally white screen of white, with all the toolbars at the top.
I know that my physical connections are very good: I have tested the modem, turned the pc market etc and I can also receive/send emails.
This problem started today, September 8, 2011 and has never happened before.
Is it a coincidence that Firefox itself to day before I disconnected yesterday evening? Could this be something to do with this particular new update?
I also noticed that just before I "opened" Firefox, I now get a small box indicating:
[JAVASCRIPT APPLICATION]
Handl exc in Ev: TypeError: this oRoot.enable is not a functionThis never appeared before - I hope that it offers a clue has what is wrong.
The browser not be stuck in Mode safe, said by the way.
Of course, I can't find solutions to the problem on the internet, I don't physically see all Web sites!
(A friend sends this request in my name from their pc)Any light you can throw on this problem of confusion would be much appreciated. I'd rather not have to uninstall and reinstall Firefox if possible.
If the only option is to uninstall Firefox and reinstall from your site, I'm also in trouble (I can not see the internet or download).
In this case, would you be able to send the .exe file as an attachment to my e-mail address? In the affirmative, please let me know and I'll give you more details.Thanks in advance.
One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.
Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.
See:
Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).
- Makes no changes on the start safe mode window.
- https://support.Mozilla.com/kb/safe+mode
-
Need help with windows defender. all my files folders pictures everythiing disappeared and I find myself with this black screen and it is not all good: o)
I don't know why vista windows no longer charge, or when the files and folders disappeared
How Windows Defender is on this problem?
Follow these steps to try to solve your problems of boot.
Restore point:
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:
Download the ISO on the link provided and make a record of repair time it starts.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
http://www.bleepingcomputer.com/tutorials/tutorial148.html
Link above shows what the process looks like and a manual, it load the repair options.
NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.
Read all the info on the website on how to create and use:
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner:http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista startup repair disk.
You can do a system restart tool, system, etc it restore.
It is NOT a disc of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Data recovery:
1. slave of your hard drive in another computer and read/save your data out there.
2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.
3 Alternatively, use Knoppix Live CD to recover data:
http://www.Knopper.NET/Knoppix/index-en.html
Download/save the file Knoppix Live CD ISO above.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://isorecorder.alexfeinman.com/isorecorder.htm
Download the Vista software from the link above.
After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.
Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.
Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1st in the boot order.
Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.
When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.
Click on the icons of hard drive to open and to understand which drive is which.
Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).
Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.
See you soon.
Mick Murphy - Microsoft partner
-
Need help with screen Blus of death (BSOD) on my computer toshiba laptop
Hello all, Ive had a little last week, or problems with my laptop. While playing a game (minecraft), I would randomly have a BSOD error and my laptop will re-start. Initially, I gave it no thought, but when it happened again, I decided to try to do a little research, but I'm not terrible with technology and other then I'm neither the case with my own research.
If someone could point me in the direction of a few possible ways to get this problem.
guys do you propose I make to the store and see if they can check it out, what would I need if I did.
I got a program to read some sort of file "dump" made when occurs a BSOD, I publish what this program here says? the program is BlueScreenView, if yes, what I have post the spectator thing? There are has 2 main screens on it, SDO as Sho different dump files (which is on the top) and on the bottom, it lists the names of different files for each dump file I think that some of them highlighted.
im not this product with tech so I don't know much but I need to post anything on my laptop or any information of the dumpfile and would have this info help in any way to determine the problem? just tell me what I have to post and ill get the information displayed in a response, thank you.
-leoknighted
PS: I don't think that playing minecraft is the cause of the BSOD and crashing, but I only get it when playing minecraft, so I don't know if minecraft is causing accidents and others. I watch videos and this all the time and I never have an accident. I'll try and play a different game and see if this causes my laptop down and the cause is perhaps high usuage to my laptop, as I've said games require a lot of power of a laptop/computer, if they are not the 'best' laptop for games. but yh, if someone thinks they can help me and need some information please tell me so I can get it for you. If you guys think it would be best to get a professional to look just mylaptop say, however im save as a last resort.
Hello
I suggest you to refer to this article to check if this help.
Resolve stop (blue screen) error in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.
Important: while performing the check disk on the hard disk, if bad sectors can be found, then check disk will try to repair this sector. All the data available in this area may be lost.
Custom installation WARNING: If you format the hard disk during the installation, the data files are saved in a Windows.old folder on the partition you installed Windows 7. However, you should always back up the files. If you have encrypted data files, you may not be able to access them after installing Windows 7. If you have backed up your data files and then restored after Windows 7 is installed, you can delete the Windows.old folder.
Let us know if you need help with this question, we will be happy to offer you our help.
-
Is there a default value for the color management in PSE10? Beautiful photos from iPhoto, but blur with elements. I need help with this before as I consider that the upgrade to PSE13 and beyond.
Printing which forms an angle seems ok, but one that is horizontally seems faded, incomplete.
I was wondering if I saved a layer somewhere and set it as a default value.
If you group the layers, you will be left with a single layer, thus spreading your concern.
Suggest that you do the following:
- Make sure you have the latest drivers for your printers
- Reset the default preferences.
Hold the Alt, Ctrl + Shift keys when you click the icon to open the items. When asked if you want to delete the settings file, say Yes.
Items nearby and let regenerate the file.
-
If I want to watch my site ive created in google is to see this:
Woning huren in Paramaribo, Suriname
hureninparamaribo.nl /.U good bij ons een in Suriname hurenvakantiehuis. Deze woning is good in room Paramaribocentrum van het. Of woning is een rüstige wijk good ...
U has said een + 1 belangrijkste As you can see before the URL is no WWW. When I click on the link, the only thing I see is a small form. Y at - there someone who can tell me where I can change this?
Kind regards Brian
Great! Thank you..
Date: Wednesday, May 9, 2012 06:15:57-0600
From: [email protected]
Topic: Need help with google ranking
Re: Need help with google ranking
created by Ken Binney in Dreamweaver - discover complete discussion
Hello, Brian - the problem is the file extension, you use on your pages in the folder root of your remote site you have a page with only a form named:http://www.hureninparamaribo.nl/index.html and you have this other page with all your content named:http://www.hureninparamaribo.nl/index.htm your server displays the html file then delete the index.html page form rename the index.html page content
Replies to this message received to everyone subscribed to this topic, not directly to the person who posted the message. To post a reply, or reply to this email or visit the message page: http://forums.adobe.com/message/4390439#4390439
To unsubscribe from this thread, please visit the page message to http://forums.adobe.com/message/4390439#4390439. In the Actions box to the right, click on stop Notifications by e-mail.
Start a new discussion in Dreamweaver, by e-mail or at the Adobe Forums
For more information on maintaining your email forum notifications please go to http://forums.adobe.com/message/2936746#2936746.
-
Newbie needs help with cookie cutter in PSE8
I'm new to PSE8, the cookie cutter tool and work with layers, what I need help with to accomplish what I want to do.
I want to use one form of cookie cutter to make several 'holes' in an image, leaving a solid color background layer to show through. (Or another path, use the form of Cutter of biscuit as a solid 'rubber stamp' color to stop shape on the image in several places)?
I opened my image in the editor and create a solid color fill layer, and then I select the shape of Cutter of biscuit that I want to use, for example a sheet. Then I select the color fill layer, click and drag to create the sheet randomly somewhere in it. When I release the mouse button, the window returns to the image and there is the leaf, locked in a box, in the color I want, on the image. I drag the box (leaves) to where I want it and click the green checkmark to accept. So far so good. Here's the problem: in order to create another sheet on the image, I have to create another layer of fill and repeat the whole process. If I try to use the same fill layer to a second sheet, the first sheet disappears. I must be missing something very simple, but I can't figure out how to get out several sheets of a filling layer. Also, I use a version without the constraint of the sheet because I would create several sheets of different sizes out of the fill layer as well.
I would be grateful for any help or suggestion!
Try the following:
- File > new > empty file - white
- Create a new layer, fill it red
- Create a new layer, fill it out of blue
- Access the marquee tool, drag the rectangle to the blue layer. You should see "ants in market". Press DELETE on the keyboard. You should see red in the rectangular hole.
- Access to the custom shape (U) tool. In the form of culture library, select the heart shape black all and hang out on the blue layer. Press CTRL + left click the thumbnail of the layer of the capping layer for "mobile dotted." Hit delete on keyboard twice, and you should see red in the heart shaped hole.
- Continue with other forms.
-
Need help with PL/SQL query complex
I need help with a query that need access to data from 3 tables. That's what I did
I created 3 tables
CREATE TABLE post_table
(
post_id varchar (20),
datepost DATE,
KEY (post_id) elementary SCHOOL
) ;
CREATE TABLE topic
(
TOPIC_ID varchar (20),
name varchar (20),
PRIMARY KEY (topic_id)
);
CREATE TABLE blogpost_table
(
TOPIC_ID varchar (20),
post_id varchar (20),
PRIMARY KEY (topic_id, post_id);
FOREIGN KEY (topic_id) REFERENCES topic (topic_id) ON DELETE CASCADE,
FOREIGN KEY (post_id) REFERENCES post_table (post_id) ON DELETE CASCADE
);
Now, I inserted a few values in these tables as
INSERT INTO post_table VALUES ('p1', to_date ('2009-09-14 18:00 "," MM/DD/YYYY mi:ss'));))
INSERT INTO post_table VALUES ('p2', to_date ('2009-07-18 18:00 "," MM/DD/YYYY mi:ss'));))
INSERT INTO post_table VALUES ('p3', to_date ('2009-07-11 18:00 "," MM/DD/YYYY mi:ss'));))
INSERT INTO post_table VALUES ('p4', to_date ('2009-03-11 18:00 "," MM/DD/YYYY mi:ss'));))
INSERT INTO post_table VALUES ('p5', to_date ('2009-07-13 18:00 "," MM/DD/YYYY mi:ss'));))
INSERT INTO post_table VALUES ('p6', to_date ('2009-06-12 18:00 "," MM/DD/YYYY mi:ss'));))
INSERT INTO post_table VALUES ('p7', to_date ('2009-07-11 18:00 "," MM/DD/YYYY mi:ss'));))
INSERT INTO VALUES subject ("t1", "baseball");
INSERT INTO category VALUES ('t2', 'football');
INSERT INTO blogpost_table VALUES ("t1", "p1");
INSERT INTO blogpost_table VALUES ('t1', 'p3');
INSERT INTO blogpost_table VALUES ("t1", "p4");
INSERT INTO blogpost_table VALUES ('t1', 'p5');
INSERT INTO blogpost_table VALUES ('t2', 'p2');
INSERT INTO blogpost_table VALUES ('t2', 'p6');
INSERT INTO blogpost_table VALUES ("t2", "p7");
I'm launching SQL queries on the table in this topic.
I want to write a SQL query that returns me the name of a topic (s) and the number of blog_post (s) associated with the topic in descending order of the number of blog posts created in July.
Can someone please help me to write this query?
Thank you
Published by: user11994430 on October 9, 2009 07:24Thanks for the test of the configuration!
SQL>SELECT t.NAME, COUNT(*) 2 FROM topic t, blogpost_table b, post_table p 3 WHERE b.topic_id = t.topic_id 4 AND p.post_id = b.post_id 5 AND p.datepost >= DATE '2009-07-01' 6 AND p.datepost < DATE '2009-08-01' 7 GROUP BY t.NAME 8 ORDER BY COUNT(*) desc; NAME COUNT(*) -------------------- ---------- baseball 2 soccer 2
HTH, Urs
-
Need help with installation on Photosmart C7280 all-in-one
I had my printer is installed and has been using the printer for 3 wireless laptops in my house. Now, I can't even find my backup drive, so I have need help with downloading the software to use my printer and also get to use wireless. I don't know what happened, but the fax for this printer is listed, but not the printer itself. Help, please!
Click here to download the software for your printer:
has chosen the appropriate operating system that corresponds to your computer and download the full software features.
-
HP laptop: need help with internet and search for things
whenever I'm on chrome internet explore google ect and go to tab it is says unknown error or no internet connection or anything and just takes me chrome ect. I need help with this im involved in a byod class and my computer won't let me on what whatever usually it just starts out black and white and the seeds I my search request
Yes it's a Windows 10 and it arrived already installed I'll take the other info now
-
Need help with the installation of an adapter of graphics Super Palit GeForce 9500GT - 512 MB - DDR2 SDRAM in a M2N68 motherboard (narra6). Should I disable the onboard graphics in the bios? When the card is installed, no VGA work outs and the PC does not start. Checked and recontroler implementation of the card in the PCI slot. PC is a desktop HP G5200uk PC. Windows 7 operating system.
Hello
The link below is a guige to install a video card in your Pc. In particular, it seems that you will have to perhaps specify the location of the new card in the bios and save this change before you install the new card - see step 4 in the guide on the link below. If your new card fits into the PCI Express x 16 slot, you will need to define PCI Express in the bios and save the changes.
http://support.HP.com/us-en/document/c01700855
Kind regards
DP - K
Maybe you are looking for
-
When new BIOS and drivers for Satellite A100-906 out?
Why the releases of new versions of Bios stopped?Model very coarse, it is necessary to improve it!New versions of the drivers and bios!
-
Linking the Qosmio G20 with Nokia E90 to use as webcam
Hi friends, I think you know the guys on Mobiola Web Camera.I installed and tried plugging the E90, but after some time I got an error in my mobile connection has expired. I think I need to select the com port appropriate for the connection.For Bluet
-
You want to buy a printer.
I have a hp Pavilion g7-2118nr Notebook PC and you want to buy a wireless printer. I would like to have the photo, scanner, printer. It will be not much used. Open to suggestions. Preferably no more than $100.00 +.
-
Configure Blackberry as modem on system "Vista".
I get an "Error 734 PPP link control protocol. I searched the help with no result. Frustrated!
-
Wireless icon missing in systray notifcation area
My wireless icon does not appear in the systray. I have all the icons showing in the notifications area, so it is not hidden. How can I get the icon? I use Win7 Home Premium.