I need help with the NFC for my sony vaio
Hello
I have a Sony Vaio third generation touch screen processor i5. I have a problem with the beam of the nfc. On the screen of my phone, it shows you device does not support this file. Could someone help me?
Salvation is can you provide the model name of your VAIO computer?
Tags: Sony Computers
Similar Questions
-
need help with the code for update of a record (conditional release)
all together
Published by: 871431 on July 9, 2011 18:30871431 wrote:
HelloI am looking to update a table that contains documents approved & not homologous, for this combination date & funds it should allow the only recording not approved.
what I did is check if the recording is U if the incoming value is not approved for this error of combination stimulus funds & date, but if I need to update this unlicensed recording error... so I need to update record, and trigger the error if try to insert another disc not approved.
Hope I am clear...Not clear for me
Help pls
Please realize and understand that everyone here talks about SQL
Please post DDL for table
Please provide the sample/test data & then explain with the help of data from the trial itself said it that results should be & why -
Need help with the algorithm for my paint program
I was doing a paint program with the help of a BufferedImage where the user draws to the BufferedImage and then I pull the BufferedImage class with that I extend JPanel. I want the user to be able to use a function of cancellation via ctrl + z and I also want them to update what type of paper, they write you on direct: a) b) graph paper c) double paper in white. I don't see how using BufferedImages. Is there something I'm missing, or should I do otherwise? I try to avoid the opposite effect because it seems too demanding on the computer, but if this is not feasible, then I guess I have to, but I think that I should ask you guys if what I do is logical or monstrous.
What I intend to do, is make a LinkedList that has the following 4 parameters:
(1) previous point
(2) current point
(3) current color
(4) boolean connectPrevious
This means that program essentially attracts the instant line using two points and the color specified in paintComponent(Graphics g). The Boolean value is ctrl + z (undo) purposes. I also intend to use a background thread to remove entries repeated in LinkedList except for the 25 latest LinkedList components (i.e. number could change in practice).
What do you think guys?
Any input would be greatly appreciated!
Thanks in advance!Look at the package javax.swing.undo package - UndoableEdit interface and the UndoManager class.
Everything to implement the interface. Store all the data necessary to perform your action (pixels, colours, forms etc.). Add all your UndoableEdits in an instance of the UndoManager class and call undo() redo() when you need it.
-
Need help with the update for my 11 elements
I have 11 items and just switch to the Canon 7 d Markii and shooting in RAW for the first time last night and the editor and organizer elements does not files because it does not acknowledge the BRUTE of the 'new '... device information I tried the update and he offered only a 7.4 update, where the 7 5 d Markii must at least a 8.7 update... How can I get the latest update if my program does not by itself? I DON'T like the way Canon program from the disk provided with the camera is set for RAW images, and I don't want to have to change all the RAW files to only align my items... I enjoyed how the older my camera RAW files were brought in Editor with the pop-up window which allow me to make changes to quick for photos before opening them in the editor... Yet once I don't like how the Canon window works for RAW images... Thanks for any help on this... Nicole
Camera Raw 8.7 was introduced in PSE13. If your software is too old to be compatible. Yu have two choices:
- Upgrade to the latest version PSE14
- Converting your CR2 for Adobe (DNG) Raw and DNG files will work with PSE11
The Adobe's DNG Converter is free, and you can batch process all of a file CR2 by selecting a source folder and destination folder.
-
Need help with the search for special characters in oracle text
Hi all
Oracle 11g sql developer 4.0 help
I am facing this challenge where Oracle text when it comes to searching for text that contains a special character.
What I've done so far with the help of http://www.orafaq.com/forum/t/162229/
"CREATE TABLE"SOS" COMPANY ".
(SELECT "COMPANY_ID" NUMBER (10,0) NOT NULL,)
VARCHAR2 (50 BYTE) "COMPANY."
VARCHAR2 (50 BYTE) "ADDRESS1"
VARCHAR2 (10 BYTE) "ADDRESS2"
VARCHAR2 (40 BYTE) 'CITY ',.
VARCHAR2 (20 BYTE) 'STATE ', HE SAID.
NUMBER (5.0) "ZIP".
) CREATION OF IMMEDIATE SEGMENT
PCTFREE, PCTUSED, INITRANS 40 10 1 MAXTRANS 255 NOCOMPRESS SLAUGHTER
STORAGE (INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645)
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS USER_TABLES DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT 1)
TABLESPACE 'USERS ';
Insert into COMPANY (COMPANY_ID, COMPANY_NAME, Address1, Address2, CITY, STATE, ZIP) values (1, 'LSG SOLUTIONS LLC', null, null, null, null, null);
Insert into COMPANY (COMPANY_ID, COMPANY_NAME, Address1, Address2, CITY, STATE, ZIP) values (2,' LOVE "S TRAVEL', null, null, null, null, null);
Insert into COMPANY (COMPANY_ID, COMPANY_NAME, Address1, Address2, CITY, STATE, ZIP) values (3, 'DEVON ENERGY', null, null, null, null, null);
Insert into COMPANY (COMPANY_ID, COMPANY_NAME, Address1, Address2, CITY, STATE, ZIP) values (4, 'SONIC INC', null, null, null, null, null);
Insert into COMPANY (COMPANY_ID, COMPANY_NAME, Address1, Address2, CITY, STATE, ZIP) values (5, "MSCI", null, null, null, null, null);
Insert into COMPANY (COMPANY_ID, COMPANY_NAME, Address1, Address2, CITY, STATE, ZIP) values (6, 'ERNEST AND YOUNG', null, null, null, null, null);
Insert into COMPANY (COMPANY_ID, COMPANY_NAME, Address1, Address2, CITY, STATE, ZIP) values (7, "JOHN DEER", null, null, null, null, null);
Insert into COMPANY (COMPANY_ID, COMPANY_NAME, Address1, Address2, CITY, STATE, ZIP) values (8,'Properties@Oklahoma, LLC', null, null, null, null, null);
Insert into COMPANY (COMPANY_ID, COMPANY_NAME, Address1, Address2, CITY, STATE, ZIP) values (9, 'D.D.T L.L.C.', null, null, null, null, null);
BEGIN
CTX_DDL. CREATE_PREFERENCE ("your_lexer", "BASIC_LEXER");
CTX_DDL. SET_ATTRIBUTE ("your_lexer", "' SKIPJOINS,"., @-"'); -to jump. , @ - ' symbols
END;
/
CREATE INDEX my_index2 ON COMPANY (COMPANY_NAME)
INDEXTYPE IS CTXSYS. CONTEXT IN PARALLEL
PARAMETERS ("LEXER your_lexer");
SELECT company_name FROM company WHERE CATSEARCH(company.COMPANY_NAME, 'LLC','') > 0 ORDER BY company.COMPANY_ID;
output
company_name
1 LSG SOLUTIONS LLC
2 Properties@Oklahoma, LLC
only 2 rows back but must return 3
It helps if you post a copy and paste of effective enforcement of the full code, including the results. You posted an index of context with the query with catsearch, which requires a ctxcat index. You must be a context clue that you did not post and did not add your lexer to. The following table shows it returns all the lines of 3 as planned using either a with catsearch ctxcat index or a context index with contains, as long that you include the lexer in your create index. You must also be sure that the index is created, or synchronized after inserting or updating data.
Scott@ORCL >-version:
Scott@ORCL > SELECT banner version of v$.
BANNER
--------------------------------------------------------------------------------
Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
AMT for 64-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
5 selected lines.
Scott@ORCL >-table and the test data:
Scott@ORCL > CREATE TABLE 'SOCIETY '.
2 ("COMPANY_ID" NUMBER (10,0) NULL NOT ACTIVATE,)
3 'COMPANY_NAME' VARCHAR2 (50 BYTE),
VARCHAR2 (50 BYTE) 4 "ADDRESS1"
5 "ADDRESS2" VARCHAR2 (10 BYTE),
VARCHAR2 (40 BYTE) 6 'CITY',
7 VARCHAR2 (20 BYTE) 'STATE ', HE SAID.
NUMBER (5.0) 8 'ZIP '.
(9) THE CREATION OF IMMEDIATE SEGMENT
PCTFREE 10 10 PCTUSED 40 INITRANS, MAXTRANS NOCOMPRESS SLAUGHTER 1 255
11 STORAGE (INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645)
12 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS USER_TABLES DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT 1)
TABLESPACE 13 "USERS."
Table created.
Scott@ORCL > START
2 insert in SOCIETY (COMPANY_ID, COMPANY_NAME, Address1, Address2, CITY, STATE, ZIP) values (1, 'LSG SOLUTIONS LLC', null, null, null, null, null);
3 insert in SOCIETY (COMPANY_ID, COMPANY_NAME, Address1, Address2, CITY, STATE, ZIP) values (2,' LOVE "S TRAVEL', null, null, null, null, null);
4 insert into SOCIETY (COMPANY_ID, COMPANY_NAME, Address1, Address2, CITY, STATE, ZIP) values (3, 'DEVON ENERGY', null, null, null, null, null);
5 insert into SOCIETY (COMPANY_ID, COMPANY_NAME, Address1, Address2, CITY, STATE, ZIP) values (4, 'SONIC INC', null, null, null, null, null);
6 insert in SOCIETY (COMPANY_ID, COMPANY_NAME, Address1, Address2, CITY, STATE, ZIP) values (5, "MSCI", null, null, null, null, null);
7 insert into SOCIETY (COMPANY_ID, COMPANY_NAME, Address1, Address2, CITY, STATE, ZIP) values (6, 'ERNEST AND YOUNG', null, null, null, null, null);
8 insert in SOCIETY (COMPANY_ID, COMPANY_NAME, Address1, Address2, CITY, STATE, ZIP) values (7, "JOHN DEER", null, null, null, null, null);
9 insert in SOCIETY (COMPANY_ID, COMPANY_NAME, Address1, Address2, CITY, STATE, ZIP) values (8,'Properties@Oklahoma, LLC', null, null, null, null, null);
10 insert into SOCIETY (COMPANY_ID, COMPANY_NAME, Address1, Address2, CITY, STATE, ZIP) values (9, 'D.D.T L.L.C.', null, null, null, null, null);
11 END;
12.
PL/SQL procedure successfully completed.
Scott@ORCL >-lexer:
Scott@ORCL > START
CTX_DDL 2. CREATE_PREFERENCE ("your_lexer", "BASIC_LEXER");
CTX_DDL 3. SET_ATTRIBUTE ("your_lexer", "' SKIPJOINS,"., @-"'); -to jump. , @ - ' symbols
4 END;
5.
PL/SQL procedure successfully completed.
Scott@ORCL >-ctxcat index and using catsearch queries:
Scott@ORCL > CREATE INDEX my_index2 ON COMPANY (COMPANY_NAME)
2 INDEXTYPE IS CTXSYS. CTXCAT PARALLEL
3 PARAMETERS ("LEXER your_lexer");
The index is created.
Scott@ORCL > SELECT
2 company_name
3 the COMPANY
4. WHERE the CATSEARCH (company.COMPANY_NAME, 'LLC', ") > 0
5 ORDER BY company.COMPANY_ID;
COMPANY_NAME
--------------------------------------------------
LSG SOLUTIONS LLC
Properties@Oklahoma, LLC
D.D.T L.L.C.
3 selected lines.
Scott@ORCL >-context and using the query index contains:
Scott@ORCL > CREATE INDEX my_index3 ON COMPANY (COMPANY_NAME)
2 INDEXTYPE IS CTXSYS. CONTEXT IN PARALLEL
3 PARAMETERS ("LEXER your_lexer");
The index is created.
Scott@ORCL > SELECT
2 company_name
3 the COMPANY
4 WHERE CONTAINS (company.COMPANY_NAME, 'LLC') > 0
5 ORDER BY company.COMPANY_ID;
COMPANY_NAME
--------------------------------------------------
LSG SOLUTIONS LLC
Properties@Oklahoma, LLC
D.D.T L.L.C.
3 selected lines.
-
need help with the driver for the wireless card
I just reinstallled windows 7 Home premium 64 bit on my pavilion dv7 and im having troublle get the wireless to work.
the id of my wireless card is
PCI\VEN_8086 & DEV_0886 & SUBSYS_13158086 & REV_67
PCI\VEN_8086 & DEV_0886 & SUBSYS_13158086
PCI\VEN_8086 & DEV_0886 & CC_028000
PCI\VEN_8086 & DEV_0886 & CC_0280If anyone can link me to the good drivers would be great.
Thank you
Hello:
Here is the link to the latest version of the driver for this card.
A first or second on the list according to bit W7 version you have installed.
https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=23723
-
Need help with the code for drop-down selection, please!
I'm falling out of scope with a drop of water in my form. My form is long, and certain areas are in Page 2. When I click on the "Customer hospitality event" drop-down list selection, the fields of P2 do not hide. Here is the code that I have on the menu drop-down:
-form1. P1.meetDetails.meetType::exit :-(JavaScript, client).
switch
(this.rawValue)
{
" case" " Customer home ' :
Header.PRESENCE = "visible";
meetDetails.presence = "visible";
meetDetailsaddl.presence = "visible";
Form1. P2.rstatus.presence = 'hidden '.
Form1. P2. Status.Presence = 'hidden '.
breaking ;
}
Help, please!
Thank you!
I see that references to the P2 have no end of line separators (-).
Form1. P2.rstatus.presence = 'hidden '.
Form1. P2. Status.Presence = 'hidden '.
The JavaScript runtime engine is perhaps unfortunate. Try to add them.
Steve
-
Need help with the syntax for default message.
I want to display by default in the layout of lead for Feild "owner of lands":
IIf (< plRegion_ITAG > = "South", "SG",
IIf (< plRegion_ITAG > = "North", "AT",
IIf (< plRegion_ITAG > = "East", "GK",
IIf (< plRegion_ITAG > = "West" "BM", "Other than thesis it should be NULL")))
("Other than these we NULL"-> to do this, I tried a different name)
SG, THE, BM, GK (little) are my managers society of sales/Terriotory.
I did not miss anything, the above syntax doesnot work for me.
Thanks in advance.
Kind regards
Ratan NHi Ratan,
A few notes:
(A) you are missing a comma between "West" and "BM".
(B) you must use "and not"
(C) I'm not sure that you can have a drop down list remain NULL by using the IIf function. Even if you can it won't probably work with "other than these, it must be NULL.
(D) I suggest that you actually add a value called NULL for the list of choices and after writing the syntax you can disable it to prevent your users from accidentally choose it.
(E) should look like this:IIf (
= 'South', 'SG',
IIf (= 'North', 'AT',
IIf (= 'Is', 'GK',
IIf (= 'West', 'NULL', 'WB'))) -
Need help with the launching track pack for forza code 4
Bought new Forza 4 and the lancer Track Pack code does not work, how do I get a code that is generated in the form I've already paid for it. Rank of loads of numbers and sent 10 s of emails but cant seem to get help.
This is the help I get when the cat to an Ambassador xbox on xbox.com
Terry wrote:Need help with the launching track pack for forza code 4The Xbox Ambassador says:Location of Ambassador of the community...The Xbox Ambassador says:Location of Ambassador of the community...The Xbox Ambassador says:Your question will be answered by an Ambassador of the Xbox. You have been connected to the Ambassador as a user Xbox [3]The Xbox Ambassador says:HelloTerry wrote:HelloThe Xbox Ambassador says:HeyTerry wrote:just to be on the phone to xbox live support and was told to come hereThe Xbox Ambassador says:ok\The Xbox Ambassador says:What is your problem?Terry wrote:I bought the 4 for forza ansd 360 new sealed Christmas...Terry wrote:has got 2 codes that accompanies the game but the pack track code does not workThe Xbox Ambassador says:Wow goodTerry wrote:whenever I put in the code it says code redeemedThe Xbox Ambassador says:I think the code is used. You must return to the retailerTerry wrote:I tried to, but since I already opened the case they will not acceptThe Xbox Ambassador says:Oh. No,Terry wrote:the code had been used or defective as I am the only person who has touched the game once opened, tried to enter the code when it is openThe Xbox Ambassador says:Maybe it was auto bought?Terry wrote:so, how do I get another code generated track Pack if defective?The Xbox Ambassador says:I do not know.Terry wrote:bought the game new, so I get the track packThe Xbox Ambassador says:Oh. It's bad.The Xbox Ambassador says:I think that if you Exchange 1 code it will buy itTerry wrote:car pack code worked, starter pack did not workThe Xbox Ambassador says:Oh.The Xbox Ambassador says:It's a badThe Xbox Ambassador says:BTW you have an evolution of the tests?Terry wrote:Yes, I want to? but more anxious to get a code object generated for this packThe Xbox Ambassador says:Hey if I help can u give me this game too?Terry wrote:?????????????????Terry wrote:So is it possible to get a code for that time?The Xbox Ambassador says:HeyThe Xbox Ambassador says:Yes.The Xbox Ambassador says:you need to contact themThe Xbox Ambassador says:and tell them that the code is used.Terry wrote:I was told to come here? where can I go to get the code?Hi Terryg76,
· What version of the operating system is installed on the computer?
I suggest you to contact the game manufacturer for more help and information.
-
Need help with the ip configuration on/etc/hosts for the installation of 11 GR 2 on linux vmware 6 on win7.
Let me know if you need more info... in fact I have a setting error while installation said
-(/ etc/hosts has no correct entry for the host name)
Host: 192.168.85.100
Win7 ip: 192.168.1.x
Thank you...
(host computer)
Win7 64 bit
(vmware)
Oracle Linux Server 6.3 version
Release of Red Hat Enterprise Linux Server 6.3 (Santiago)
Oracle Linux Server 6.3 version
-(/ etc/hosts has no correct entry for the host name)
Then post your/etc/hosts.
Host: 192.168.85.100
Win7 ip: 192.168.1.x
Why 85? have you tried 192.168.1.100?
-
I need help with the program of Photos on my macbook pro
I use a Macbook Pro with OS of Yosemite. I really need help with the Photo program. I never really got the hang of IPhoto and now that it's a new program, I'm really confused. Where can I go to learn this without waiting for the next workshop in a local store?
Hi, I'm fighting to open same mine, making a new software update
-
Original title: need help with the blue screen issue
My computer turns saying a blue screen: a problem has been detected and windows were shut down to prevent damage. The problem seems to be caused by the following file: NAVEXI5. SYS PAGE_FAULT_IN_NONPAGED_AREA he seems to have a different error whenever he turns to a blue screen. Can someone help me please.Hello
1. Since when are you facing this problem?
2. you remember to make changes to the system?
3. do you get an error with this error code?I suggest to unplug external devices such as printer, scanner, etc. that are plugged into the system, and then restart the system and check if the problem persists.
Method 1.
I suggest you to do a check disk from the recovery console and check if the problem is resolved. Follow the steps mentioned below.
a. start into the recovery console using the XP CD. Follow the steps mentioned in the article below.
Description of the Windows XP Recovery Console for advanced users
http://support.Microsoft.com/kb/314058
b. perform a disk check.
How to perform disk error checking in Windows XP
http://support.Microsoft.com/kb/315265Method 2.
I suggest you to start with the XP CD and then do a system restore. Follow the steps mentioned in the article below.
How do I recover from a corrupted registry that prevents Windows XP startup
http://support.Microsoft.com/kb/307545I hope this helps.
-
I'm on Acrobat 10 for mac and I need help with the distribution of shape feature. Is there a way to change the registration e-mail download addressed to the? Currently all forms I create and then distribute may only be subjected to my email account... I appreciate any help!
Do not use the feature distribute the form. Instead of this, just put up a button "submit" and configure it to send email using any email address you want. Just add a button and set the action of the mouse upward on "Submit a form" and use a type mailto URL and specify that you want to send the full PDF. Then activate the reader of the document: where "Advanced/extended features in Adobe Reader" is located in Acrobat XI?
If you really want to use distribute the form for some reason, change the e-mail address in your preferences: Edit > Preferences > identity > Email address
-
Hello need help with the opacity mask.
Hello need help with the opacity mask. I hope someone out there can help
I inherited a logo that appears to use a Logo of OM has a shape with a grad. This grad at first sight is not used in the Grad scheme and there is not editable. Looking at the transparency palette I find an OM (pic1) output option. If I choose what the grad on separates it from the page of the form, that is from there I can change/remove as required (Note2).
However, sometimes (he did no change), I'll be back to the same original form and output option is grayed out and is no longer available. Or I go to the similar shape that has the same treatment and I can't go out OM (pic3)
The only difference is the thumbnail in the transparency palette, which is strong in pic1 and rated on pic3. What Miss me? I'm not clear what the advantage is simply OM using the Grad palette to apply a grad in my form, but until I can get rid of OM who is there, I can't comfortably apply to the grad I want.
The white gradient LHS I have no problem with. I choose fortunately only and each time get the possibility of release of OM.
The other thing weird. When I select the white gradient. Sometimes, the exit option is in the palette without going through the drop-down list (Fig 4).
Other times seems not that OM has already been applied, because the palette gives me the ability to mask rather than liberation (5 photos). Until I go to the drop down and then I find Release is an option after all.
What is the difference here? Not much of a problem, because either way I can release OM to be able to change the grad.
The file is passed through several hands and play anywhere to try to resolve issues, and many stops and save slot, so something along the line was of course done a logo and not the other because of the difference, but I can't for the life of me see what that.
I hope someone can help. Very appreciated
See you soon
Dave
Dave,
I've (mis) understanding the issues, you can account for the box to the right in the main palette transparency (called thumbnail) here.
Illustrator help | Transparency and blending modes
represents the masking objects.
Some of your screenshots show no object mask, so it only is not really a mask even if do the opacity mask has been clicked and there seems to be one in the layers palette, wherever you look.
I think that it is perhaps the issue.
-
Making the ear of corn and need help with the ball.
I do some corn on the COB for an illustration and I need help with the texture of the ball. I've been slowly making progress with gradient for kernels mesh, but I can't seem to recreate the look of the ball at all. I tried to recreate it in a rectangle by using the option in the menu object (1 row, 50 columns) gradient mesh and I'm trying with the fusion in object mode, but not lucky yet. Can someone help to put me on the right track to make the texture:
I've been slowly making progress with gradient for kernels mesh, but I can't seem to recreate the look of the ball at all.
Tank,
You have published three images stylistically very different. The first is photographic and call probably (but not necessarily) for graduates of mesh. The other two are graphical treatments (and frankly, they're both rather flat; lack of depth).
Illustration style extends the range of cartoonish in sketchy photo-realism and all the rest. The problem is you didn't show your own attempt so that anyone can have an idea of what you're trying to achieve the stylistic point of view.
I just need to put in place so that the final step does not appear the whole box. The problem now is trying to make the style of the good brush to reproduce the effect...
You seem to think you have to build a kind of linear construction and then find a way to reshape the shape of each part of the leaf. Yes, you pouvez approach it this way, but Illustrator users has often tend to be what aunt Molly would call "too clever by half."
Not everything must be something semi intelligent auto or complex and tedious consruct involving brushes, envelopes, masks, etc, etc. Much can be accomplished by thinking that he just thanks to measure you draw directly economic paths and constructions, which take no more time (often less) and result in very tidy, simple files. Again, a lot depends on what you are trying to achieve the stylistic point of view. But here's an example that only took a few minutes to draw:
If the above consists of:
Three roads closed, 8 points each, with ordinary linear degrees
Three mixtures of open path with three anchor points for each key path
Six paths closed for shadows / highlights, with 19 points in total
Mixtures being directly from the paths drawn comic forms, the spacing of the veins 'automatically' and intuitively follows the width from point of view of the worksheet.
Rather than to build a boilerplate brush, colouring and the weight of each of the three main paths of the vein mixtures can be set individually at any time, simply directly by selecting the key path.
JET
Maybe you are looking for
-
Failed to create an e-mail message
It's weird... suddenly I can not create a new email. And this applies both when I select the new message tab, or I go into the menu drop down and select new. Nothing happens... Advice?
-
Satellite P100 - Win XP PRO - unable to connect to normal - WLAN card
Cannot connect in normal mode, Windows XP Pro Satellite P100. I can only access my PC under XP in safe mode.I have my Windows password. What happened: I tried to update my network card drivers and I put access to check the connection. I can't update
-
Hello my friends I have Lenovo G560L with Processor: Core I5 M540 GPU: Intel HD Core I5 RAM: 4 GB HARD DRIVE: 500 GB I need the latest driver for it! and It doesn't contain HDMI and dosen't boot to OneKey Recovery and I need an external GPU it where
-
Annoyingly slow operation laptop
Hi I have a laptop HP product, I'm not sure of the model, but here is the specifications OS Windows 7 ultimate 64-bit RAM 4 GB (3.8 usable) Processor Intel (r) Core i3 CPU m 330 @ 2, 13GHz 2, 13GHz I usually play games, but not the games with the hig
-
Compatibility issues with Windows Vista Business
Could not install Oracle 10 g/Microsoft SQL Server 2005 on this 32-bit machine. Windows Vista Business.It is machine Lenovo Thinkpad with 3 GB of RAM. Installation ends abnormally. Can install Oracle/SQL Server 2005 on Windows Vista or should I chang