I need load recommendations

Similar Questions

• Need a recommendation of the video card for CS4

  My old Radeon x 1950 is not up to the task when it comes to Windows 7 and Premiere Pro (it works fine on Vista, but I'm going to 7), so I need a replacement. I not looking for more late-and-most great... in fact, a map of the previous generation would be fine. My HP xw6400 workstation is a few years old, but has a lot of life left in it for my application, so I just need to update that element.

  I'll probably get on eBay for an old or inexpensive card of the current generation, preferably around $100. He just needs to me until I can fully update (read: replace) my current workstation. Any recommendations for the CS4 and W7 x 64?

  I would have a look at an ATI HD4670 or a HD5450. Both are well meet your needs and are an attractive price tag, until you decide to upgrade to a new MEPS supported card.

• HP ENVY 14 2020NR: need a recommendation for a replacement hard drive

  Greetings,

  I have an a HP ENVY 14 2020NR with a hard drive died. Blue several screens before the new year, did a complete system restore, which seemed to have fixed things. Unfortunately, after 10 days the blue screens are back. The unit is several years old, and my next step is to replace the hard drive. I have all the data backed up elsewhere and ready DVD restore disc.

  Here are the specs of the drive:

  Hitachi disc HARD 7 K 750-750. P/N H2T7501672S.

  I am trying to identify the right replacement hard drive. Looks like it was 750 GB at 7200 RPM. Some choice out there. Can anyone recommend the correct replacement hard drive?

  Thanks in advance!

  DaniBoy

  Based on the laptop HP ENVY 14 - Maintenance Service Guide, it seems that your computer supports the following readers and more.

  6.35 cm (2.5 in) hard drives (HD) and the SSDS (SSD), 9.5 mm (. 37-in) and thicknesses of 7.0 mm (. 28 - in)
  Customer-accessible
  Serial ATA
  Supports the following hard disk configurations:
  ● 750 GB (7200 RPM)
  ● 640 GB (7200 RPM)
  ● 500 GB (7200 RPM)
  ● 320 GB (7200 RPM)

  Supports the following simple SSD drive configurations:
  ● 128 GB mSATA,
  ● 80 GB, mSATA
  ● 160 GB, SATA

  According to the above information, any hard disk 2.5 "SATA or SSD of 9.5 mm and 7.0 mm profile should work fine. This includes the newer readers who are more capacious.

  Please see Newegg - internal laptop hard drivesfor a few recommendations of HDD and Newegg - internal SSD for a certain number of decent SSD.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Need a recommendation for a second firewall router

  I have currently a second router connected to the LAN port of the #1 router/WiFi in order to create a firewall between the Local area network of my #1 WiFi router and a PC which is connected by a cable Cat5 to the second router. This second router has no need of WiFi and only needs to support a PC, to call the parent PC.  For proof of concept that I used an old router, GigaFast EE400 - R 10/100 Mbit / s, it works but I think it slows my PC parent.

  So, I would like to replace this old second router with something reasonable that is not slow things down, but provides a firewall between LAN and the parent PC.

  I thought maybe around $100 - maybe more if necessary.

  Router 1 # is a M142WR - Gen31 Verizon ActionTec provided

  It is not uncommon to see that the ISP supplied routers do not have the ability to assign static to the WAN interface, they only allow DHCP.

  What can be useful, it is if you can configure the DHCP server to assign customer-specific DNS servers, so that the DNS relay router is not used. Unfortunately, even once provided ISP routers are often locked, and you cannot make these settings.

  Yes, you can configure your computer to go to an external DNS instead of use the router of the client, it is sometimes quite effective, but the main thing is to get rid of the relay using a scenario of relay that you had as I've found it can be very slow.

  I only suggested Google like her I know by default. Speed DNS depends a lot on the network to which you are attached. It of a bit technical, but reference RCMP DNS will tell you this that the DNS the fastest that YOU can connect to. I know that BT router DNS servers are slow, but the BT DNS network is the fastest available for me.

• I need a recommendation for a slick way integrate audio

  I do a rejuvenation treatment Muse of a church site. Every week there is a new audio recording of a sermon to add to the site.

  Can anyone recommend a slick way to add and archive audio recordings in a site of Muse?

  Thank you

  2. link to the file downloaded to a button or text using the hyperlink tool...

  

• Need a recommendation of the forum please?

  I post my question here but I know that a lot of people hate it when people ask questions unrelated forum! So, as it's my favorite forum, I thought that I would like to ask the question here?

  in order to create my first website I used Flash Catalyst and Flash builder 4.5 connected to Apache a MySQL and was very grateful that after that I had loaded my catalyst in flash builder that it generated a list of functions to be used between the constructor and MySQL and I think, as my version of this site was built in PHP generated functions are called functions AMFPHP , but I could be wrong!

  But now to my question see even through, I did a lot of research on the net to get a better understanding of this subject, it doesn't seem to be much information apart from the basic level, on a good note it forced me to use my brain and I think I got it just want to tie some lose ends!

  So does anyone know a good forum for AMFPHP, Ive tried a few, but I don't seem to be getting no answer!

  as my search function works very well as long as all variables are not null but returns an error if one is null ERROR 'Missing argument 5 for CustomerService' so I was wondering if I could make the variable equal to a wild card if null?

  OK well I solved my search function by using the default null, that was easy!

• Calibrator, LCD display, software and hardware... need to recommendation (s)...

  Back to photography when CRTs were the only monitors... I know that this is extremely important and want to be fully compatible with Adobe.  Please advise...

  You want to ask advice on what type of computer and the monitor to buy?

  Most of the machines in the average range (costing around $300 +) made today must be able to manage of Photoshop Elements.

  For reference, this page is the required system configuration. They are the bare minimum required from a computer for Photoshop Elements run. Today most of the new machines would meet these specifications.

• Need to load jobs parallel to the load on the same target table plan

  Hello

  We need loading parallel work on the same target table. We use LKM and IKM in our interfaces on the target.

  I have a questions if run us jobs in parallel on the same target table is executed both the process of creation, insertion and drop tables mixed obtained work and will be causing problems.

  Please guide us recommended to implement on the same parallel load of target

  Concerning

  Naren

  HI Naren,

  Yes, out of the box your (temporary) work tables will be taken upwards and cause a failure in the treatment. Take a look at this post on the parallel of loading in ODI12c https://blogs.oracle.com/dataintegration/entry/odi_12c_parallel_target_table. It also has a link to a solution for ODI11g if you're on this version.

  Kind regards

  Michael Rainey

• Need recommendation for PIX logging software

  Hello

  I need a recommendation for a PIX software logging so that I can better manage my PIX 525 and 515 firewall. I am currently using Cisco Syslog and I want something that I can set up specific, priority alerts, send email or page... etc. Your help would be most appreciated.

  Thank you

  You can use: KIWI Syslog

  http://www.kiwisyslog.com/software_downloads.htm#download%20Now

  Commercial products:

  Cisco VMS = http://www.cisco.com/go/vms

  Sawmill = http://www.sawmill.net/

  IQR = http://www.eiqnetworks.com/products/products.shtml

  sincerely

  Patrick

• Network of twinning with Port trunks to support the host ESX VShere 4 with several NIC for load balancing across a HP ProCurve 2810 - 24 G

  We are trying to increase production of our ESX host.

  ESX4 with 6 NIC connected to HP Procurve 2810 - 24G 2 ports; 4; 6; 8; 10 and 12.

  The

  grouping of parameters on ESX is rather easy to activate, however, we do not know

  How to configure the HP switch to support above connections.

  Pourrait

  someone please help with a few examples on how to seup the HP switch.

  Help will be greatly appreciated as we continue to lose tru RDP sessions

  disconnects.

  Best regards, Hendrik

  Disabling protocols spanning-tree on the Procurve ports connected to the ESX host is going to promote a recovery more rapid port. Similarly, running global spanning tree is not recommended if you mix some VLAN iSCSI and data in the same fabric (i.. e. you do not want a STP process to hang storage IO). Spanning tree on your switches, look PVST (or Procurve BPMH) to isolate the STP VLANs unique events.

  In regard to the load balancing is, by default (route based port ID) value algorithm requires less overhead on the ESX hosts.  You may not use LACP on the Provurve the lack of facilities LACP ESX. You must use "route based on the IP hash" sideways ESX and 'static trunks' on the side of Procurve. Unless you have specific reasons why your network need loads this configuration, I'd caution against it for the following reasons:

  (1) IP hash requires thorough inspection of packages by the ESX host, increasing CPU load as load package increases;

  (2) the static configuration puts switch physics rigid and critical ESX host port mapping. Similarly, groups of ports all will fail as the Procurve batteries for management only and won't be on switches 802.3ad circuits Group (i.e. all ports of a group of circuits must be linked to a single switch) - this isn't a limitation of the port ID routing;

  (3) K.I.S.S. love port ID mix of port ID, beacon probe and failover on the port assignments you will get segregation of the raw traffic without sacrificing redundancy - even through switches.

  I hope this helps!

  -Collin C. MacMillan

  SOLORI - Oriented Solution, LLC

  http://blog.Solori.NET

  If you find this information useful, please give points to "correct" or "useful".

• Need help to choose a hard drive of my iMac desktop backup

  need a recommendation for at least a desktop hard drive 3 TB to use with Time Machine.  with Thunderbolt 2 or 3 USB my iMac is 10.10.5 Core i5, 16 GB of memory. In view of the Weston Digital my passport Pro 4 TB or LaCie2 6 to

  There are many choices, and they are all good for use with Time Machine or may even come with their own such as My Passport templates backup software. You will also find very competitive prices on amazon.com.

  If you plan to use Time Machine, so be sure that your backup disk is 2 or 3 times more capacity than the drive on your computer. Time Machine can use the space quickly.

  Time Machine deletes the old files if they have been deleted from the source when he needs space on the backup to a new incremental backup drive. Time Machine "Jules Destrooper" its backups. over 24 hours, old backups, except the first of the day; These "dailies", old more 30-day backups, except the first day of the week. The weeklies are kept as long as there is room.

  How long a backup rest file depends on how long it was on your Mac before you deleted, assuming that you do at least one backup per day. If she was there for less than 24 hours, it will be maintained for at least a month. If she was there at least a week, it will be maintained as long as there is room. By default, Time Machine backs up every hour. This can not be changed in Time Machine. There are third-party utilities that will modify the as Editor of Time Machinebackup interval.

  Time Capsule sparsebundle grows in size as needed, but not descended. So, from the point of view of the user of the time Capsule, it seems that no space was released, although there may be space in the sparsebundle.

  Once Time Machine finds he can't free up enough space for new backup it reports the disk is full. You can erase the backup disk and start over or get a larger drive.

• need an easy way to encrypt windows xp pro

  need a recommend on the best way/easy to encrypt hard drive... Thank you

  I assume you mean full hard disk encryption...

  There are two ways that I know.  The free way is to use Truecrypt to the "encryption system.  I use Truecrypt on a regular basis, but more often only encrypt parts of my file system.  I have used for more than 10 years without any problem and considers it one of the top 10 freeware out there.

  TrueCrypt: <> http://www.truecrypt.org >

  Symantec also has a product called "Whole Disk Encryption" that does the same thing.  That is what my company requires to be installed on all computers laptops such that in the event that they are lost or stolen, no proprietary information of the company are disclosed.

  Whole Disk Encryption: <> http://www.symantec.com/whole-disk-encryption >

  HTH,
  JW

• Loading of Lotus Smartsuite in Windows 7

  I have a very old version of Lotus 123 (specifically Lotus Smartsuite 3.1) and even if it worked on Windows 95 and every version of Windows since it does not load on Windows 7; I tried the 64-bit compatibility. support Windows 7 breast without a bit of luck.  I've built a few programs very, very large (2 + meg of spreadsheets) with this version of Lotus, and they don't run correctly even with new versions of Lotus.  So, my problem.  I need load and run this version of Lotus (Smartsuite 3.1) so my spreadsheet works correctly.  It took a year to build, and I don't really have another year to review and update to a newer version of Lotus which may or may not work in Windows 7.

  Can make you use of a PC virtual solution?

  Windows Virtual PC
  Download Windows XP Mode
  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

  Windows XP Mode (Windows 7 only, but not one of the Home versions) "you are not eligible to download Windows XP Mode. You must have Windows 7 Professional, enterprise or full to run Windows XP Mode."

  Virtual PC 2007
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=04d26402-3199-48A3-afa2-2dc0b40a73b6&displaylang=en&TM

  Virtual PC 2007 running on Windows 7
  http://blogs.msdn.com/virtual_pc_guy/archive/2009/08/19/running-Virtual-PC-2007-on-Windows-7.aspx

  This warranty covers the gambit set of VMS in the 'Home' versions if you want to have a look.  Of course you will need a licensed copy of XP to install and run in any of them (except XP Mode).

  VirtualBox is an impressive VM competitor
  http://WindowsSecrets.com/search/?CX=017937947691920082874%3A_ilcm6kdy_y&COF=FORID%3A11&q=VirtualBox+is+an+impressive+VM+contender+&SA=search&advWS=1&advSAN=1&advPages=15

  Setting up a Dual Boot with XP system could be another option to consider?

  How to make a Dual Boot Installation with Windows 7 and XP
  http://www.SevenForums.com/tutorials/8057-dual-boot-installation-Windows-7-XP.html

• Can I load data in imported Essbase cube in OBIEE?

  Hi all

  I use OBIEEv11.1.1.7.I imported Essbase cube in RPD and I load sheet Essbase Excel data using smartview.

  My question is after you import the cube in OBIEE do I still need load the new data into Essbase cube or is it possible to load data directly to the OBIEE to excel for any Essbase cube?

  Thank you

  GP

  
  

  Hi GP.

  Essbase substitution variables can be imported and can indeed be referenced in OBIEE. So I think that you have a solution here :-).

  Thank you

  GEO

• need to download Adobe Acrobat XI Standard not pro key will not work

  need load standard X 1 adobe acrobat not pro will not work

  There is no standard Acrobat of the trial.

  you need your installation CD.