I need to change my black and white a PMS color chart

Similar Questions

• My color scheme changes in black and white, but preferences continue to it's normal color.

  On computer start everything seems fine and in color until the login screen. Often there's color for a few moments, but before I'm even able to enter my password of connection the regime change in black and white and stays that way. Sometimes in re-opening a session, it goes through the same process, but the computer remains very rarely in color.

  Nothing specific seems to have changed this problem started by chance and it worsened slowly more often remain black and white.

  
  

  I don't know what I can do to sort this problem, thank you for your time.

  Hello Acantor,

  ·         You have the latest drivers installed for your video card?

  I suggest that you go to your computer manufactuers website and download the latest drivers for your video card.

  See this article which will give you different options to upgrade the drivers:

  http://Windows.Microsoft.com/en-us/Windows-Vista/the-hunt-for-drivers-how-to-find-Windows-Vista-drivers-for-all-your-hardware

  If nothing works, try to uninstall and reinstall the graphics card.

  ========================

  1. click on start. In the start search box type "devmgmt.msc", and then press ENTER.
  2. expand "Graphics cards", double-click the entry to the display device.
  3. click on the "Driver" tab, click "Uninstall".
  4. click on start. In the start search box type "appwiz.cpl", and then press ENTER.
  5 remove the related entries the display device.

  Reinstall the driver with your driver CD.

  Alternatively, you can try to uninstall the driver from Device Manager, then go to the computer or the device factory site download the latest driver for your network card and install it.

  Thank you

  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• I ONLY NEED TO PRINT IN BLACK AND WHITE

  I was almost out of ink for my all in one printer. I could only replace the cartridge and the Black Yellow now, which is OK because I only need to print in black and white. I've adjusted the page screenshot on print "to print in black ink only" screen and click on 'apply '. But now it always sends a message saying that she does not print unless ALL the cartridges are replaced. I don't need to print in color! What can I do to get the printer to use black ink until I can afforsd to buy the other two color cartridge?

  You should check with the printer manufacturers support site, but many printers will print at all if no have all the ink cartridges.

  Windows cannot override the printer design in this area.

• I want to print black and white with empty color cartridge. My model is all-in-one HP Deskjet 4288.

  I want to print black and white with empty color cartridge. My model is all-in-one HP Deskjet 4288.

  The Deskjet F4288 joined the printheads on the ink supply.  These are replaced at each change of cartrdige so there is no concern about printing empty color or black cartridges.

  You should be able to print in ink entry mode "backup" by removing color (or black, but not both) cartridges.  There will probably be a warning message about ink backup mode but you should be able to print and the printer will work regardless of the cartridge is available.  In handwritten backup with the only color black cartrdige mode areas will print in shades of gray.  If print ink backup mode only the installed color cartridge then black will be printed by mixing colors.

  See page 75 of the manual here, that says:

  Use the entry ink-backup mode
  Use ink-backup mode to operate the HP all-in-one with only one cartridge. The
  ink-backup mode begins when an ink cartridge is removed from the print cartridge
  transport. During the ink-backup mode, the product can only printing from the computer.
  You cannot start a print job from the control (such as copying or scanning a Panel
  original).

  NOTE: When the HP all-in-one device works in ink-backup mode, a message is
  displayed on the screen. If the message appears and two print cartridges are installed
  in the product, check that the piece of tape plastic protection has been removed
  each print cartridge. When the plastic strip covering the contacts of the print cartridge, the product
  cannot detect the cartridge is installed.

• I can't seem to change the black and white on my Lexmark printer.

  At the same time, I changed my printer set default print black and white.  Then I would just change color when I need it to be.  Then I noticed that the check box for printing black and white has been checked and gray, so I couldn't change it.  I thought it was because I was really low on my color.  I now have a new color in this cartridge, but still it won't let me uncheck the box in black and white.  I tried to restart my computer but no change.  Help, please.

  I have a Lexmark 7600 series.

  Check the settings of the printer itself to verify that it is not changed and there only in black and white (if there are all these settings on the printer)-which would probably override the settings on your computer.  BTW, what is the exact printer?  This is it: http://support.lexmark.com/index?page=answers&startover=y&question=lexmark+7600+series&locale=en&productCode=LEXMARK_X7675&segment=SUPPORT&userlocale=EN_US#1?  If not, what is it?

  You can get in trouble with your device drivers, firmware and/or software.  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get the drivers (and you shouldget them to at least the printer (http://support.lexmark.com/index?page=content&productCode=LEXMARK_X7675&actp=PRODUCT&id=DR11032&segment=SUPPORT&userlocale=EN_US&locale=en (if I was just on the printer above and you are using 32-bit Vista) and all you have time to do - they can help way beyond simply solve this problem)) leave the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html. You can also try the Driver Verifier Manager to see if you can identify the driver or the responsible device (assuming that it is the cause):http://support.microsoft.com/kb/244617.

  Also, check the color cartridge belt moves freely and not get stuck on one side or the other - if the belt does not move, the printer can turn off the option.

  Remove the printer from the computer (I do not mean the drivers or software - I mean the configuration in the control panel).  Create a new printer in the start menu / control panel / printers section. Click on add a printer and start from scratch.  Then see if the new connection/configuration of printer works better than the old.

  If this does not work, then contact Support technique Lexmarkhttp://www1.lexmark.com/content/en_us/about_us/contact_us.shtml and see if they can help you because I don't think it would be a problem of Vista if you have reinstalled everything.  It may be a problem with the installation but it can also be a hardware problem - so be it, they should be able to help.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Need to convert to black and white for the print command... but it already is?

  Hello everyone. Last night, I introduced an order of printing for postcards, and got an email back asking that I convert the black back. The thing is that there is nothing on the back of the postcard that is not black and white. I have the original photoshop files, I just save it in photoshop pdf format, but how do the black and white if they are already?

  Image > Mode > grayscale.

• Can I convert to black and white, then add color?

  I was just curious to know if the touch of adobe photoshop can transform a black and white photo and then just add the colors you want. As you can do in CS5

  Hi hemigirl28,

  Yes, this kind of technique can be accomplished with Photoshop Touch, the process may be slightly different than using Photoshop CS5. One of the features of Photoshop Touch is the painting with effects (Saturation, color, temperature, black & white, Dodge Balance / burn, brightness / contrast, Shadows / Highlights, curves, hue, sharpness, comic strip and a pencil). One of the tutorials included with the product market by taking a picture of a horse color, paint the background in black and white and then paint with a saturation increased on the horse itself to bring out. Check out the screenshots in this doc to see what I mean. http://forums.Adobe.com/docs/doc-1372

  -Dave

• How to change from black and white to color

  I forgot how to go back to color printing. When I go into the Advanced preferences I don't know what to click. That's what I should do or there at - there a simpler way?

  No, it's not a color Btn

  Unless you specify the actual HP model (there are many Photosmart printers) nobody can tell which option you will need to change.

  In general terms with any program that you want to print from is open, you select file > print, who must then show your HP printer as the chosen device, you then edit/change the printer properties

• I changed my black and white photo.

  Picture is now black & white.  Is there a way to change the parts of the picture in colour?

  You can do a number of things here. Import the original image as a second layer, or vice versa. If you use the original as the background and place the B & W image as a layer, you can then use the tool eraser to bring back the color on the top from the back ground image. When you are satisfied with the result, just flatten image and save it under a new title. In this way there is no error of fact because you know what you want from the original image.

• hp4200 printer ink black and white have enough color printer to print a copy of a document that is black and white

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  http://h20180.www2.HP.com/apps/lookup?h_lang=en&h_cc=us&cc=us&h_page=hpcom&lang=en&h_client=S-A-R163-1&h_pagetype=s-001&h_query=HP+4200+printer&submit.x=6&submit.y=1

  Find a manual for your printer series at the link above.

  And buy a BLACK ink cartridge.

  For your printer questions, contact HP: http://welcome.hp.com/country/us/en/contact_us.html

  See you soon.

  Mick Murphy - Microsoft partner

• HP officejet 8500 has more will not print black and white because the color cartridge is low

  I have entered the property and set it to 'levels of gray' and 'use black ink only', but the printer still will not print because "the yellow ink cartridge is low.

  incredibly frustrating that the cartridges of color completely stop you from printing, even if you are trying to print in color.

  Proffessional OS-windows 7

  is there a known solution for this?

  Unfortunately, the printer does not print until the replacement of the yellow ink. There is no work around for low ink message.

• Why is it only for letting me use black and white gray for colors?

  Whenever I try to use another color such as blue, red, purple any color, will it just Gray, black, white... why?

  Look in your menu under Image > Mode. Is is set to Grayscale?  If so, choose a mode that supports color.

  If this isn't the case, put some screenshots.

• Photosmart 7525: Scanning and Capture allows more scanning black and white. Only color or gray.

  I've done a 'clean reinstall"Windows 10 and reinstall all my programs, including the Capture and scanning HP. Now the menu settings of scanning and Capture only the possibility to 'Color' or 'gray '.  This causes all of the PDF files scanned to have a gray background. Very undesirable. Is there a way to return to the earlier version cause the current configuration is a serious downgrade.

  Hello

  I would use lots of software and drivers printer on Windows 10, first not micky mouse Scan and Capture app.

  Kind regards.

• OfficeJet 4500 wireless print photos in black and white only, not color.

  Color photos print in superb B & W but not color. Color cartridge is new and good impressions pictures, red, green and blue words in a program processing perfectly, just no color. Any ideas?

  OK, I them opened in Picasa Photo Viewer after 'configuration', and they print well in life glorious color now. And SURPRISE! It's on Kodak photo paper!

  Thank you

• DeskJet HP3512 Windows 7 can continue to print black-and-white if the color cartridge is empty?

  If my color cartridge is empty, can I continue to print in black?

  DeskJet 3512, Windows 7.

  HI oldtoot,

  You should be able to print with just the black cartridge installed.

  Here a link to the manual. On page 30 in details how to use mode single-cartridge to operate your printer using only a single print cartridge.