I need to connect a projector to my computer while keeping the monitor running Vista
We would like to hang a projector to my computer, so we can show the results of the race in our pinewood derby. We also owe it to the monitor to work yet. The computer is running Vista Home version. Thank you.
Hello
You must select the option to duplicate from the link below.
http://Windows.Microsoft.com/en-us/Windows7/connect-to-a-projector
Note: This also applies to Windows Vista.
Hope this information helps.
Tags: Windows
Similar Questions
-
How to connect a Macbook Pro with the (just bought) Retina display for a Dell Ultrasharp U3014's new? I tried to connect with HDMI and DVI cable supplied with the monitor but the monitor says "no dvi - d" cable. I never tried to do that before so I'm lost.
Use a mini-displayport cable. Connect to one of the ports Thunderbolt the MacBook Pro to ultra-compact monitor entry.
-
How to install the certificate on android phone
I have a galaxy phone and I need to connect to exchange but cannot install the certificate on the phone
Hello
I suggest you to contact the Galaxy phone holder and check.
http://www.Samsung.com/us/mobile/cell-phones
-
I have the iPhone4 and am running Windows Vista on my Dell computer. The only way I can connect my computer to the internet is using a USB cable from the phone. It's not always easy, but I do not get a connection in any other way.
Hello
(1) you are trying to connect to Internet via iTunes?
(2) is iTunes iPhone detect when the wireless connection?
(3) you use iPhone to access the Internet?
Check out the links that can help you further in the question of fixing.
iOS: Internet connection
http://support.Apple.com/kb/HT1695
http://www.Apple.com/support/iPhone/Internet/
Hope this information helps.
-
I just bought a copy of a license 3 reviews for QuickBooks Pro 2010. I can connect 2 computers on the home network very well. But when I try to connect computer (network) a 3rd to my machine to share the file, I get the error message. "No more connections are possible at this remote computer at this time because there are already as many connections as the computer can accept." How can I connect my 3rd computer?
I read the article in the following link, to change the value of the EnableConnectionRateLimiting, but I do not see this key.
http://support.Microsoft.com/default.aspx/KB/969710I currently have Windows Vista Home Premium SP2, 64-bit edition.
Hello
Thanks for the response back.
The command explained in article http://support.microsoft.com/kb/314882 if applies also for Vista, we have been able to run the command.
Some possible causes for failure Remote Desktop connection are:
a. authentication level is low/disabled.
(b) the port of remote desktop can be blocked by a firewall.
c. remote connections might not be enabled on the remote computer.
d. the remote computer may be asleep or hibernating.
e. e user account doesn't have a password.
f. the remote computer may be too busy to accept more connections.To resolve all of the above causes, follow the steps listed under "I can't connect to the remote computer:
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Remote-Desktop-problemsI hope this helps.
Kind regards
Syed V
Answers from Microsoft supports the engineer. -
Hi all
IAM facing this problem months ago
It is very disturbing especially iam fan of mouse normal (I hate the touchpad), last week he keeps disconnection/connection too.
I think that there is a software bug that connect the usb port with usb 3 connecting the keyboard/HDDThen
Please help me.update BIOS to the latest version if you have not already:
Update Firmware on keyboard too if you have not already:
-
Hello!
I want to just point out that I do not understand English, but with an interpreter and this letter is also Buda translated using Google translation services.
Signed originally to Muse is the package full of services and then fell on a problem after some time subscribed:
1. I can't unsubscribe from individual product Muse
2. whenever we need to renew the subscription to a comprehensive set of
3. the fee for a unique product and a complete set of Muse
4. He wrote a letter in support, there is no response to date.
Help solve the problem!
1 delete a subscription to a single product Muse
2. leave only one subscription for all
3 and decide with payment, pay only for a full set
Thank you in advance.
I ask you to send a reply to the mailing address [email protected]
Cancel see answer #1 in https://forums.adobe.com/thread/2023066 - includes a link to Chat from Monday to Friday
or
Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">===>
Don't forget to stay signed with your Adobe ID before accessing the link below
Creative cloud support (all creative cloud customer service problems)
-
My old iphone 6s is completely broken, it does not or registry that it is connected when plugged into a computer. I'm able to recover photos from the SIM card with an adapter USB SIM card or through any other way? I also do not save anything with AllAccess, icloud, or through my computer as you would with a digital camera.
The photos are not stored on the sims, sorry.
You can always try the Recovery Mode, little to lose at this point. If it doesn't, I suggest taking it to an Apple Store for testing.
Recovery mode:
Turn off your iOS device.
Plug charge cable to the computer only (not to the device yet).
Open iTunes on your computer.
Hold the button to power on your device and do not let go.
Plug the cable into the device while keeping the power button.
Wait for the computer to detect the device and wait that he eat.
Restore as New first, then restore sauvegardΘ if you wish.
-
Need to connect MacPro to the router
My Mac Pro is now connected to the internet via the airport card and the modem is down. But I need to connect a router on a mac so I can run my laserprinter through a network using a RJ45 cable. I can't run the cable in the area of the modem is located. Can I connect the router directly to Mac and use the card airport as the internet connection?
Dbarunas,
You left out some important details, but let me see if I can answer without them:
Assuming that the ISP modem you mentioned is your current destination of wifi and Airport card is built-in wifi Mac Pro adapter. I also guess your desktop not a laptop since you don't mention MacBookPro.
1. If your router is wireless and assuming that the 'airport' is the the computer's built-in wifi card.
(Wired connection) modem-> router (cable) * (wifi)-> laptop (wifi) (* printer cable) to connect to the router via wifi instead of the modem, then turning off the wifi on the once the router WiFi modem set up, if possible. (No need to nuke the family bits with too many signs wifi).
2. If your router is not wireless.
Modem-> laptop (wifi) * (wired)-> router (wired) (wired)-> printer (cable) (* make sure that the computer has not a gateway specified in the network settings for this connection assigned static address.)
3. If your router is not wireless and no other host on the router. (without router required)
Modem (wifi)-> laptop (wifi) (wired)-> * printer (cable) (static addresses the only, once again no gateway) (* this may require a crossover based on the capabilities of the printer Ethernet cable.)
When you use a wired network on the laptop and wireless Internet access, make sure the "backend" network cable is on a completely different range of addresses and 'NO' gateway assigned or the laptop would not know how to get to the INET.
Joe
-
I can't connect my wifi Ipad. I tried to off suggestions for Apple. Now I'm stuck in the IPad introduction after my hard stop and when I get to choose a network, it is not mine. All other devices in the House are connected. I can't get out of the set up mode to go into the settings and try to activate the wifi. Suggestions?
Because you cannot find your network, the SSID is hidden by the router? If so, you need to select other, and then enter the SSID and password yourself.
-
Why do I need to connect to IEEE xplore?
I use a computer at my University. Sometimes I need to search for articles in IEEE Xplore http://ieeexplore.ieee.org/Xplore/home.jsp
Actually, since there is a computer in my University, I don't need no connection IEEE Xplore to get the document I want. When I use other browsers like IE, it automatically connect to an account (this is perhaps because of the IP address.). But whenever I open IEEE Xplore in firefox. It is said: «Institutional Sign In» Some say it is because firefox uses a proxy? I don't know. How to solve this problem?
Hi qiaot,
You may need to ask the administrator of these computers from the University if they have a mozilla.cfg file or preferences locked in the Firefox profile first.The parameter that controls how Firefox connects to the internet is as follows:
- Click the Menu of Firefox
- Click Preferences/Options
- A settings tab open, click the magic hat or the "Advanced" tab and at the top, click on 'network '.
- Click on the 'Settings' button and take a look at the second screen shot. If this second screenshot has no information on a proxy this could the question and you would uncheck "do not ask for authentication if the password is saved" (assuming that you have Firefox save your passwords: Password Manager - don't forget, delete, modify and import passwords saved in Firefox )
Don't forget, if you connect to this computer with a name of ads may save the password for the profile account, however if it's a public computer, others will have access to the password if you save it to the Treasury. I hope this helps.
-
Is why each dictionary app needs internet connection?
After downloading several applications dictionary, I found that they all need internet connection to work.
There are no applications that are available to be used offline. As a side note, by downloading and installing via Marketplace, an application can be labeled "work offline", wherein if an application doesn't have this label, the app is not available to work in offline mode.
-
Help! I NEED to connect my iPhone5s to the stereo, but it has only one usb port and whenever I connect it, it connects? Is there a setting I need to change on my phone? Help, please
You will need something like that and a micro USB to USB cable
http://www.Apple.com/shop/product/MD820AM/A/lightning-to-micro-USB-adapter
-
Qosmio G20-139: What cable I need to connect a 5.1 system speakers?
Hi all
Does anyone know which cable or connector, I need to connect my Qosmio g20-139 to a 5.1 system speakers?
I searched the forum and it seems that someone has used a "optical cable Toslink" - check link below:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=3665
Anyone successful with this? Can someone please give me a link to a place I can buy something that works? (I put 'Toslink optical cable' in google and it gives like 1 million different things!)
Thanks for your help.
Chris
Hello Chris
I found a useful site on the required cables.
Check out this link.
http://www.mycableshop.com/2nd_Cat/Toslink.htmYou wondering where you can buy these cables. I put t know you came but I m sure that every good PC or reseller of audio accessories can sell you these cables.
-
Hi, I have a macbook pro retina 15 "(mid-2015) and I would like to connect it to my I-mac to use as monitor." The i - mac is 2009 and a not a port Thunderbolt... wouldn't I need a love at male Cable DVI?
Any help / advice would be much appreciated... Thank you!
Your iMac has minidisplay port? Here are the conditions:
https://support.Apple.com/en-us/HT204592
Ciao.
Maybe you are looking for
-
QuickTime Player cannot be opened because of a problem (macOS Sierra).
I've recently upgraded to Mac OS on my MacBook Pro (mid-2012) and QuickTime Sierra stop working! I can't understand how to solve this problem. Instead, it gives me a screen that says: QuickTime Player cannot be opened because of a problem. Check with
-
I downloaded the 64 bit version of iTunes on their line to my Windows 10 PC. My songs just now appear as the album covers, and I want to display in a list. I don't see this option in the view or one of the menus. Any ideas?
-
When I use Firefox in many websites, it prevents the promotional photos and flash...For example: pic of mediafire, firstly with firefox site. in the second place with cometbird browser. http://i524.Photobucket.com/albums/cc327/nao_vampire/b3c67c0e.jp
-
2009 m: Windows 10 drivers for the monitor
I want to know how long will be release HP compatible drivers for my 2009 m that will work in Windows 10? It's ridiculous!
-
Max Memory 4GB or 8GB G62 - B10SD?
Hello For my studies, I bought a laptop G62-B10SD about a month ago. In the new project, we started, we need to virtualize servers. Currently, my laptop works with 4 GB of memory. It is not enough to run several servers at the same time. I want to up