I need to reinstall my CS6 on my PC.  I installed it on this computer for 2 years now, but anyway half of subsequently moved to one of my hard drives and the other half is on the other.  I be sure to consider both drives off the coast and reinstall on the

Similar Questions

• It keeps saying "Windows is unable to complete the installation. To install windows on this computer, run the Setup again. "When I tried to reinstall Windows Vista Home Premium

  I removed the original defective hard drive and installed a new one in my Desktop HP Pavilion. Then, insert Vista Home Premium Recovery Disk 1, then 2 disc. After the prompt to restart the computer to complete the installation of Windows, I got this error message:

  "Windows Setup could not configure windows to run on this computer hardware."

  I then click OK and then this message:

  "Windows is unable to complete the installation. To install windows on this computer, run the Setup again. »

  I have computer knowledge very very basic.

  Please help me!

  Thank you

  Hello

  You will need to contact HP for the problems with the help of the HP restore procedure is not a process from Microsoft.

  You can also try the Forums of HP Support for assistance.

  http://h30434.www3.HP.com/

  See you soon.

• If I install CC on one computer, then after having worked on this computer for awhile I install United Nations.  Is that what I can then reinstall CC on another computer under the same license? Thanks for your attention

  If I install CC on one computer, then after having worked on this computer for awhile I install United Nations.  Is that what I can then reinstall CC on another computer under the same license? Thanks for your attention

  You can activate the product on two computers, if are not the product on a computer before the uninstall, it is always better to disable the CC from this computer.

  To turn off

  launch no matter what CC products and click Help > log out.

• My Mac has said that I don't have the necessary permissions, (although I repaired permissions and checked that I am an administrator of this computer) for the upgrade - what can you tell me what the problem is? Mac 10.5.8

  My Mac has said that I don't have the necessary permissions, (although I repaired permissions and checked that I am an administrator of this computer) for the upgrade - what can you tell me what the problem is? Mac 10.5.8

  This has happened

  Each time Firefox opened

  I tried to upgrade to version 2.0

  User Agent

  Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_5_8; en - us) AppleWebKit/533.16 (KHTML, like Gecko) Safari/533.16 Version/5.0

  See http://kb.mozillazine.org/Installing_Firefox#Mac_OS_X
  .....
  If you have Mac OS X 10.5 or newer then follow these steps:

  Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
  Trash the current demand for Firefox to do a clean reinstall.
  Install the new version you downloaded.
  Your profile data is stored in the Firefox profile folder, so you will not lose your bookmarks and other personal data.

• Windows Vista - after the RESTORE partition HARD drive: WINDOWS COULD NOT COMPLETE the INSTALLATION. TO INSTALL WINDOWS ON THIS COMPUTER, RESTART THE INSTALLATION

  Hello

  I have WINDOWS VISTA and just tried to reinstall my laptop of restoration on a HARD disk partition.

  The restore went through, but then I got the error: WINDOWS COULD NOT COMPLETE the INSTALLATION. TO INSTALL WINDOWS ON THIS COMPUTER, RESTART THE INSTALLATION

  When I press 'OK' (which is the only option), it tries to start again, until I get the same error through the black screen.

  How can I get out of this loop please?

  Thank you.

  Lucie

  Hello

  For any problem with the help of the recovery Partition that has been copied to the hard disk by the computer manufacturer, you must contact them.

  This recovery process is the manufacturer, not Microsoft.

  ________________________________________________

  You never told us why you wanted to do a restore. If you had serious errors and the recovery process does not work, you will have hardware problems. BUT we're only guessing at this stage due to lack of information to help you.

  See you soon.

• Windows could not complete the installation. To install Windows on this computer, restart the installation

  Decided to reinstall Vista business after that my lenovo x 200 could not start. After you have reinstalled, had to restart and now it appears

  "Windows is unable to complete the installation. To install Windows on this computer, restart the installation.
  How should I solve this problem?

  Hello

  1. may I know the exact error you received during initialization failed prior to relocation?

  2. do you know the exact reason for the failure of start?

  I will be asked to get in touch with the manufacturer of the system on this issue.

  Installation and reinstallation of Windows Vista, you can fallow the article below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista#section_3

• Windows could not complete the installation. To install Windows on this computer, run the Setup again.

  Hello, here is the thing.

  Reformatted a computer with recovery discs...

  Office to the top and everything looked ok...

  Windows Installer started and makes the computer reboot several times as usual.

  BUT NOW I have a black screen with a window saying "Windows is unable to complete the installation. To install Windows on this computer, run the Setup again. »

  I opened the Task Manager and closed a 'runonce' process, which got the Explorer will... But shit message will not go away, if I close the computer restarts!

  Why did I get this? How can I make them disappear? Windows has not installed correctly? Do I need to install any additional substance to compensate for this?

  + I just noticed there is no partition for recovery in my computer... you know? This thing of 2 GB next to Local disk c

  Hello, here is the thing.

  Reformatted a computer with recovery discs...

  Office to the top and everything looked ok...

  Windows Installer started and makes the computer reboot several times as usual.

  BUT NOW I have a black screen with a window saying "Windows is unable to complete the installation. To install Windows on this computer, run the Setup again. »

  I opened the Task Manager and closed a 'runonce' process, which got the Explorer will... But shit message will not go away, if I close the computer restarts!

  Why did I get this? How can I make them disappear? Windows has not installed correctly? Do I need to install any additional substance to compensate for this?

  + I just noticed there is no partition for recovery in my computer... you know? This thing of 2 GB next to Local disk c

  Hey Abraham G

  you use discs of recovery that are made for your brand and your computer model

  and if you have problems using the manufacturer's recovery disks, you will need to communicate with them about

  It's their recovery process not microsofts

  Walter, the time zone traveller

• "Windows is unable to complete the installation. To install windows on this computer, restart the installation.

  INSTALLATION OF WINDOWS FOR THE FIRST TIME

  Hi, I am using the windows 7 Home premium with Sony Vaio netbook.  This message appears when I've been windows installation since it is newly purchased, "Windows could not complete the installation. To install windows on this computer, run the Setup again"when I click ok, and then the computer restarts automatically and then come back to this message. I reboot several times but the result was always the same. Home premium to Windows 7 has been with the netbook already, so I don't have the Disc... can someone help me solve this problem? Thank you very much

  My colleague has had a similar problem when she came back to the States with a new Vaio from Sony, I didn't just run recovery and reinstall Windows and its worked good since. She even gave me a hug for fixing.

  The problem seems to be the OOBE which would suggest its more hardware than windows, but I understand your nature, you want to be right about everything.

• 'the settings saved on this computer for the network do not match the requirements of the network.

  original title: securtity settings in my computers. where should I go and see what are my security settings?

  the settings saved on this computer for the network do not match the requirements of the network.

  where should I go and see the settings?

  Hello Arturito1,

  Thanks for posting in the Microsoft Answers forum! For assistance with your question, I would recommend that you follow the steps provided by Srinivas R in the thread below:

  http://social.answers.Microsoft.com/forums/en/vistanetworking/thread/a82432f2-9312-480A-b2ea-720033c73387

  Hope this helps J

  Adam
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• ' Error' the settings saved on this computer for the network do not match the requirements of the network "while trying to connect to the wireless network

  Title: Cannot get an Internet connection!

  Connection Wi - Fi comes with a warning that 'the settings saved on this computer for the network do not match the requirements of the network"what should I do to get a connection?

  Hello

  -Did you do changes on the computer before this problem?
   
  Method 1: I suggest you follow the steps to run the troubleshooter from the
  link and check if the problem persists.
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
   
  Method 2: I also suggest you to follow the steps from the link and check if it helps.
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
   
  Method 3: Follow the steps below to remove and add the wireless network.
  (a) click Start and select Panel.
  (b) select network and sharing Center and manage the networks without wire (on the left).
  (c) in the list, click on your network and Remove top.
  (d) you can then search for available wireless networks again and reconnect it to your network.
   
  Hope this information helps.

• I can't open my apps in creative cloud; whenever I get the trial version and the question to purchase. But I am a member for several years now. We have already removed all apps and installed them, but it does not work. What should do?

  ?  I can't open my apps in creative cloud; whenever I get trial versions and the question to purchase. But I am a member for several years now. We have already removed all apps and installed them, but it does not work. What should do?

  Troubleshooting FAQ: What should I do if I have a subscription, but my application acts as if I had a trial?

• I installed adobe pagemaker 7.0 in windows 7 ultimate, but I am not able to use it, can anyone tell me about any other program that will allow me to open my page maker in windows 7

  I installed adobe pagemaker 7.0 in windows 7 ultimate, but I am not able to use it, can anyone tell me about any other program that will allow me to open my page maker in windows 7

  @

  3 samples of files pm6 and @jay chevako warning message

  On Mon, Sep 21, 2015 at 00:25, Jay Chevako [email protected]>

• How to install or reinstall the network driver. Cannot use this computer for downlosd it

  My computer to work together a new computer for me. It is impossible to update the drivers do for worksheet. It has taken the to do. You will need to update to install or reinstall the network drivers. How it's done. I can't use this computer to download, due to the fact that it a work computer.

  You must go to the website of manufacturers of network cards and download the proper drivers.

  I hope this helps.

• Need to retrieve the HARD drive off accident T61

  My T61 crashed a while back and I would like to recover the files from the hard drive. The T61 used BIOS protection to prevent any intrusion HDD. I have my password, but no way to use it. I can attach it to another computer via the USB port, the drive will appear as unallocated. Suppose I need to ask for the password. Don't know how to do this. I have an older T60, but have been hesitant to connect this drive in it as the main drive, because the components are a little different and may not react as well. Certainly not worth damage to a work computer.

  What is the best way to recover these files?

  Thank you!

  Welcome to the forum!

  You won't damage the T60 by inserting the hard disk stuck in it, and the material must be close enough for you to be able to clear the password in the BIOS and then to recover the files.

  Good luck.

• Using Vista for 4 years now, it is required for activation, no change of material or put in the form

  I've been using Vista Business (pre installed by Dell) since the purchase of my laptop 4 years with no problems. After turned on last night he told me to validate my copy of Windows. I tried to do it but he told me that my copy is not activated, I confirmed this on my system details it says it needs activation.
  I tried the phone activation system and talked to 2 different people, they both gave me the same code to enter that twice told me that it does not match the product id. They do not seem to know what to do next and said that I should pay £46 + VAT for it to be resolved.
  I have not formatted my disk or installed new hardware that they kept insisting that I had done. The only updates other than Windows updates are on my free copy of AVG. Windows is up to date. As I said it worked fine until last night.
  Can anyone help please? I'm not too confident trying to complex tasks, so be gentle!

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->
  Validation status: invalid license
  Validation code: 50
  Code of Validation caching online: 0xc004c4a8
  Windows product key: *-* - FXB23 - KXXG9-HQRX2
  Windows product key hash: X2E5iLRSsTLU7dRNub7ZE7lePq0 =
  Windows product ID: 89576-OEM-7202827-03542
  Windows product ID type: 8
  Windows license type: COA SLP
  The Windows OS version: 6.0.6002.2.00010100.2.0.006
  ID: {3F5A002A-1108-4852-BC32-11FCC73F010F} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows Vista (TM) business
  Architecture: 0x00000000
  Build lab: 6002.vistasp2_gdr.111025 - 0338
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 100 authentic
  Microsoft Office Enterprise 2007 - 100 authentic
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files\Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {3F5A002A-1108-4852-BC32-11FCC73F010F}1.9.0027.06.0.6002.2.00010100.2.0.006x 32*-*-*-*-HQRX289576-OEM-7202827-035428S-1-5-21-86492737-1732453841-909751474Dell Inc.. Vostro 1500 Dell Inc.. A03 20080114000000.000000 + 0002F303507018400FA08090409GMT Standard Time(GMT+00:00)03DELL M08 100100Microsoft Office Enterprise 200712q8oDouzN2299mmu30n0HEFlHKTk =81599-873-4557374-652031 BC71BC5437D16D2

  Spsys.log Content: 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

  License data-->
  The software licensing service version: 6.0.6002.18005
  Name: Windows Vista, Enterprise edition
  Description: operating system Windows - Vista, channel OEM_COA_SLP
  Activation ID: f758e09b-7c7c-492c-b78c-aba5bd4e3f5b
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 89576-00144-028-203542-02-2057-6002.0000-3572011
  Installation ID: 020581161813913493702083641472926716275540258893901372
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=43473
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=43474
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=43476
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=43475
  Partial product key: HQRX2
  License status: unlicensed

  Windows Activation Technologies-->
  N/A

  --> HWID data
  Current HWID of Hash: PAAAAAEABwABAAEAAQABAAAAAwABAAEA6GHoSSKfIoJQoxrtLgmiUEaD/JDsYo4D8vQQniau4nusViqF

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20000
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  REFERENCE DELL M08 APIC
  FACP DELL M08
  HPET DELL M08
  STARTING DELL M08
  MCFG DELL M08
  M08 DELL SLIC
  SSDT PmRef CpuPm

  Hello

  ·         What is the brand and model of the computer?

  If you use computer OEM then I suggest you to contact the manufacturer of your computer for the valid product key. Check out these articles and check if that helps.

  Resolve activation problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-activation-problems

  Error message when you start Windows Vista: "your activation period has expired".

  http://support.Microsoft.com/kb/925616