I need to restore my pc and laptop as long as the factory

Similar Questions

• HP Pavilion dv6-WQ685UA #ABA needs a main battery replacement and is still covered by the warranty.

  Hello

  My HP Pavilion dv6-WQ685UA #ABA needs a main battery replacement and is still covered by the warranty.

  I always thought that this laptop can't run then 1 hour unplugged but still ran about 30-45 minutes before the battery is discharged (recommended HP). A few days ago I received this message when starting upwards:

  Main battery

  Failure ID-U360G0-000624-XD0002J-C0DL03

  Product ID-WQ685UA #ABA

  Replace the main battery.

  So here I am. How do I get a new battery, sent me? Thank you!

  Hello:

  It is a forum of consumer to consumer.

  Nobody here help you with warranty issues.

  You will have to contact HP support support.

  Contact HP on the link below for the country you live.  Select the option 'technical support after purchase.

  http://WWW8.HP.com/us/en/HP-information/summary/WW-contact-us.html

  Paul

• I need to download Photoshop CS6 and I can't find the full download

  Help

  I got a new computer and I need to download PSCS6/windows and I can't find the full download all that I can find is that of cloud. Does anyone know where it is now?

  Thank you

  Theresa

  Download the CS6 products

• HP laptop computer has no restore points, how can I get as long as the factory

  Computer was working on, they must have cut off System Restore. Now, I have no restore point and says I don't have enough memory, but I do, so I can't do anything! I need to restore to the factory. can anyone help?

  Hello Brenda Rawls.

  Restore points take back you to the factory settings.

  Press F11 at startup to start the process of HP recovery to return to factory settings.

  The process is illustrated on this HP link.

  Also read how to make your own recovery in the event of future failure of hard drive disks, etc.:

  "Recover Windows Vista operating system using HP Recovery"

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&cc=us&DLC=en

• How to restore my computer as long as the factory?

  I have a laptop HP G series and I want to restore it back to factory conditions. Please tell me how. Thank you

  Hello

  There are three main ways to restore your laptop to its 'Condition of the factory' - see the document on the corresponding link below.

  Perform a recovery of the HP system - Windows 7.

  Perform a recovery of the HP - Windows Vista system.

  Perform a recovery of the HP - Windows XP system.

  Kind regards

  DP - K

• Downloaded Firefox 4 and now no longer see the Verisign symbol anywhaere on the page or bars warning.

  A necessary thing, to see when you sign into a site id Web Audit Web site as provided by companies like Verisign. In Firefox 4 the Verisign warning symbol that changes when unknown elements are found on a page is no longer located on the page or the bars of the window of the browser. Is there something that should be set up to see this vital protective function?

  On older versions of Firefox - it appeared as a small lock wicker. If the site was a suspect the lock would show with a red bar top (on earlier versions), then with a small visual extension. It's all above and beyond the https in the address bar. Any information on this would be appreciated. Best regards, John to Brothertown books

  The padlock shows only that there is a secure connection and does not guarantee that you are connected to the right server.
  
  So you could always be connected to the wrong server if you make a typing mistake in the URL and someone said that mistyped the URL.
  
  The lock feature has been replaced by the How do I know if my connection to a Web site is secure? on the left end of the address bar.

  See also:

  • http://www.dria.org/WordPress/archives/2008/05/06/635/

  You can click on the How do I know if my connection to a Web site is secure? on the left end of the address bar to see the padlock, if there is a secure connection.
  
  Click on the "More information" button will show more details of the connection.
  
  The background color of the "Site identity" button on the left end of the address bar will change color (blue or green) and show the field in the case of a secure HTTPS connection.

  • Pass it How do I know if my connection to a Web site is secure? see "Verified by xxxx".
  • Click on the "Site identity button" on the left end of the address bar to see the padlock
  • Click on the "More information" button in this ToolTip to see additional information about the connection.

  You can use this extension to get a lock on the address bar.

  • Lock: https://addons.mozilla.org/firefox/addon/padlock-icon/

• How to restore laptop computer lenovo provided the factory

  I want to restore my laptop Lenovo N100 (2006 Vintage) for his performance of the plant.  Is there a way to do it without reformatting the C drive?  I have 1 or 1 CD FRO Lenovo recovery and rescue, as well as all 5 of the product recovery CD.  The computer starts a career, but he missed a lot and I want to restore the original level of performance.  Thank you.  JDD 20130522

  http://support.Lenovo.com/en_US/

  Go here to enter your mobile phone number, should be on the bottom of the laptop for your user manual, manual will tell you how to restore the laptop

  You can also read the link below:

  http://forums.Lenovo.com/T5/T61-and-prior-T-series-ThinkPad/T61-not-able-to-restore-to-factory-settings/m-p/140500

• What happens when the box pops up saying your name and need password for your account and I put in all the passwords that I have and nothing works

  I can't send mail or download Adobe flash, because people ask me a password none I put implement

  Download of mail has to do with the installation of Flash?

  To install access as the yo flash points have to enter your password in the admin for the Mac.

  To download mail, you will need to enter the password for this e-mail account.

  Try to reset the e-mail password by following the instructions provided by the e-mail provider.

  To reset your admin password:

  Lion and later: how to easily reset the administrator password

• WRT54G - need assistance to use wired and Wi - Fi connections at the same time

  I am trying to set up a home network and would like to have my Wired PC and my laptop using the WRT54G as a hub, router wireless.  Have been able to do all the cable, but not mixed.  Help!

  So basically, you want to enable file and printer between your computer share. Follow this link to enable sharing of files between your XP and Vista computer.

• Need help for analysis "plan and background events waiting" on the report statspack for oracle database 11.2.0.4 on AIX

  HI: I analyze the STATSPACK report: this is the "volume test" on our UAT server for most of entry or "bind variables".  Our shared pool is well used in oracle.  Recovery of Oracle logs is not configured properly on this server, as in "Top 5 events of waiting", there are 2 for Oder.

  I need to know what other information may be digging from of 'waiting in the foreground events' & ' background waiting events ", and which can help us better understand, in combination of ' Top 5 wait event, that how did the server test /?  It could be overwhelming. wait events, so appreciate useful diagnostic or analyses.  Database is oracle 11.2.0.4 updated from 11.2.0.3 on IBM AIX 64-bit, level 6.x system power

  
  

  STATSPACK report

  
  DB Id Instance Inst Num Startup Time Release RAC database

  
  

  ~~~~~~~~ ----------- ------------ -------- --------------- ----------- ---

  700000XXX XXX 1 22 April 15 12:12 11.2.0.4.0 no.

  
  Host name Platform CPU Cores Sockets (G) memory

  ~~~~ ---------------- ---------------------- ----- ----- ------- ------------

  dXXXX_XXX AIX-Based Systems (64-2 1 0 16.0)

  
  Snapshot Id Snap Snap time Sessions Curs/Sess comment

  ~~~~~~~~    ---------- ------------------ -------- --------- ------------------

  BEGIN Snap: 5635 22 April 15 13:00:02 114 4.6

  End Snap: 5636 22 April 15 14:00:01 128 8.8

  Elapsed time: 59.98 (mins) Av law Sess: 0.6

  DB time: 35,98 (mins) DB CPU: 19,43 (mins)

  
  Cache sizes Begin End

  ~~~~~~~~~~~       ---------- ----------

  Cache buffer: block 2 064 M Std size: 8 K

  Shared pool: 3 072 M Log Buffer: 13 632 K

  Load profile per second per Transaction per Exec by call

  ~~~~~~~~~~~~      ------------------  ----------------- ----------- -----------

  DB Time (s): 0.0 0.6 0.00 0.00

  DB CPU: 0.0 0.3 0.00 0.00

  Size: 458 720,6 8,755.7

  Logical reads: 245,7 12 874,2

  Block changes: 1 356.4 25.9

  Physical reads: 6.6 0.1

  Physical writings: 61.8 1.2

  The user calls: 38.8 2 033,7

  Analysis: 286,5 5.5

  Hard analysis: 0.5 0.0

  Treated W/A Mo: 1.7 0.0

  Logons: 1.2 0.0

  Runs: 801,1 15.3

  Cancellations: 6.1 0.1

  Operations: 52.4

  
  Indicators of the instance

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Buffer % Nowait: 100.00 do NoWait %: 100.00

  Buffer % success: 99.98% W/A optimal, Exec: 100.00

  Library success %: 99,77% soft Parse: 99.82

  Run parse %: 64.24 latch hit %: 99.98

  Analyze the CPU to analyze Elapsd %: 53.15% Non-Parse CPU: 98.03

  
  Shared pool statistics Begin End

  ------  ------

  % Memory use: 10.50 12.79

  % SQL with executions > 1: 69,98 78,37

  % Memory for SQL w/exec > 1: 70.22 81,96

  Top 5 timed events Avg % Total

  ~~~~~~~~~~~~~~~~~~                                                   wait   Call

  Event waits time (s) (ms) time

  ----------------------------------------- ------------ ----------- ------ ------

  CPU time                                                       847          50.2

  ENQ: TX - 4 480 97 434 25.8 line lock conflict

  Log file sync 284 169 185 1 11.0

  log file parallel write 299 537 164 1 9.7

  log file sequential read 698 16 24 1.0

  Host CPU (processors: 2 hearts: Sockets 1: 0)

  ~ ~ ~ Medium load

  Begin End User System Idle WIO WCPU

  ------- -------   ------- ------- ------- ------- --------

  1.16 1.84 19.28 14.51 66.21 1.20 82.01

  
  Instance of CPU

  ~~~~~~~~~~~~                                       % Time (seconds)

  -------- --------------

  Host: Time (s) Total: 7,193.8

  Host: Availability of time processor (s): 2,430.7

  % of time host is busy: 33.8

  Instance: Time processor Total (s): 1,203.1

  % Busy CPU used, for example: 49.5

  Instance: Time of database total (s): 2,426.4

  % DB time waiting for CPU (resp. resources): 0.0

  
  Statistical memory Begin End

  ~~~~~~~~~~~~~~~~~                ------------ ------------

  Host Mem (MB): 16,384.0 16 384,0

  Use of LMS (MB): 7,136.0 7 136,0

  Use of PGA (Mo): 282.5 361.4

  Host % Mem used for SGA + PGA: 45.3 45.8

  Foreground wait events DB/Inst: XXXXXs Snaps: 5635-5636

  -> Only events with wait times Total (s) > =.001 are indicated

  --> sorted by Total desc waiting time, waits desc (idle last events)

  
  AVG % Total

  % Tim Total wait Wait Wait call

  Event is waiting for the time (s) (ms) /txn times

  ---------------------------- ------------ ---- ---------- ------ -------- ------

  ENQ: TX - line lock 4 480 0 434 97 contentio 0,0 25.8

  284 167 0 185 1 file synchronization log 1.5 11.0

  File I/O 8 741 of disk 0 4 operations 0.0 0.2

  direct path write 0 13 247 3 0.1 0.2

  DB file sequential read 6 058 0 1 0.0 0.1

  buffer busy waits 1 800 0 1 1 0,0.1

  SQL * Net more data to the client 29 161 0 1 0.2 0.1

  direct path read 7 696 0 1 0.0 0.0

  db file scattered read 316 0 1 2 0,0.0

  latch: shared pool 144 0 0 2 0,0.0

  Initialization of 30 0 0 3 0,0.0 CSS

  cursor: hand 10 0 0 9 0,0.0 S

  lock row cache 41 0 0 2 0,0.0

  latch: rank objects cache 19 0 0 3 0,0.0

  log file switch (private 8 0 0 7 0,0.0 str

  library cache: mutex X 28 0 0 2 0,0.0

  latch: cache buffers chains 54 0 0 1 0,0.0

  free lock 290 0 0 0.0 0.0

  sequential control file read 1 568 0 0 0.0 0.0

  switch logfile (4 0 0 6 0,0.0 control point

  Live sync 8 0 0 3 0,0.0 road

  latch: redo allocation 60 0 0 0 0.0.0

  SQL * Net break/reset for 34 0 0 1 0,0.0 customer

  latch: enqueue hash chains 45 0 0 0 0.0.0

  latch: cache buffers lru chain 7 0 0 2 0,0.0

  latch: allowance 5 0 0 1 0,0.0 session

  latch: object queue header 6 0 0 1 0,0.0 o

  Operation of metadata files ASM 30 0 0 0 0.0.0

  latch: in memory of undo latch 15 0 0 0.0 0.0

  latch: cancel the overall data 8 0 0 0 0.0.0

  SQL * Net client message 6 362 536 0 278 225 44 33.7

  jobq slave wait 7 270 100 3 635 500 0.0

  SQL * Net more data to 7 976 0 15 2 0,0 clien

  SQL * Net message to client 6 362 544 0 8 0 33.7

  -------------------------------------------------------------

  Context of the DB/Inst events waiting: XXXXXs clings: 5635-5636

  -> Only events with wait times Total (s) > =.001 are indicated

  --> sorted by Total desc waiting time, waits desc (idle last events)

  AVG % Total

  % Tim Total wait Wait Wait call

  Event is waiting for the time (s) (ms) /txn times

  ---------------------------- ------------ ---- ---------- ------ -------- ------

  log file parallel write 299 537 0 164 1 1.6 9.7

  log file sequential read 698 0 16 24 0.0 1.0

  db file parallel write 9 556 0 13 1 0,1.8

  146 0 10 70 0,0.6 startup operating system thread

  control file parallel write 2 037 0 2 1 0,0.1

  Newspaper archive e/s 35 0 1 30 0,0.1

  LGWR wait for redo copy 2 447 0 0 0.0 0.0

  async file IO DB present 9 556 0 0 0.1 0.0

  DB file sequential read 145 0 0 2 0,0.0

  File I/O disk 349 0 operations 0 0.0 0.0

  db file scattered read 30 0 0 4 0,0.0

  sequential control file read 5 837 0 0 0.0 0.0

  ADR block lu file 19 0 0 4 0,0.0

  Block ADR file write 5 0 0 15 0,0.0

  direct path write 14 0 0 2 0,0.0

  direct path read 3 0 0 7 0,0.0

  latch: shared pool 3 0 0 6 0,0.0

  single log file write 56 0 0 0.0 0.0

  latch: redo allocation 53 0 0 0 0.0.0

  latch: 1 0 0 3 0,0.0 active service list

  free latch 11 0 0 0 0.0.0

  CPI of RDBMS 5 314 523 57 189 182 1.7 message

  Space Manager: slave wa slowed 4 086 88 18 996 4649 0.0

  DIAG idle wait 7 185 100 1000 7 186 0.0

  Streams AQ: waiting time 2 50 4 909 # 0,0

  Streams AQ: qmn slowed slave 129 0 3 612 28002 0.0 w

  Streams AQ: Coordinator of the 258 50 3 612 14001 0,0 qmn

  SMON timer 2 43 3 605 83839 0.0

  PMON timer 99 1 199 2999 3 596 0.0

  SQL * Net client message 17 019 0 31 2 0.1

  SQL * Net message to client 12 762 0 0 0.1 0

  class slaves wait 28 0 0 0 0.0

  Thank you very much!

  Hello

  I think that your CPU is overloaded by your stress tests. You have one VCPU with 2 wires (2 LCPU), right? And the load average is greater than one. You have time DB which is not counted in (CPU time + wait events) and which comes no doubt from time spent in the runqueue.

  > Oracle recovery logs is not properly configured on this server, as in "Top 5 events of waiting", there are 2 for oder

  It is an error in statspack for show "log file parallel write here." This moment is historical and is included in 'log file sync '. And I don't think you have to redo misconfiguration. Waiting for 1ms to commit is ok. In OLTP you should have more than one validation in a user interaction so that the user don't worry not about 1 m in batch mode, unless you commit to each row, 1 DC to commit should not increase the total execution time.

  The fact that you have a lot of line lock (enq: TX - line lock conflict) but very little time (on average 97 ms) is probably a sign that testers are running simultaneously a charge affecting the same data. Their set of test data is perhaps too simple and short. An example: when stress tests of an order entry system if you run 1000 concurrent sessions, ordering the same product to the same customer, you can get this kind of symptoms, but the test we unrealistic.

  It's a high activity of 2000 calls per second, 52 transactions per second, user. But you also have low average active sessions, so the report probably covers a period of non-uniform activity, which makes the averages without meaning.

  So note to tell about the events of waiting here. But we don't have any info about 39% of DB time devoted to the CPU which is where something can be improved.

  Kind regards

  Franck.

• I have F.8 on both desktop and laptop, works perfectly on the laptop, but have problems with not being able to open some banking logon to desktop. Helped the popups for these sites.

  Also when closed with the button 'X', cannot re - opened up the app closes in the Task Manager. OK so firm using file - exit. However, a second icon is placed in Taslbar.

  Disabled CacheViewer continued and this seems to have solved all the problems.

• Need help with high back and create more space on the computer's internal drive.

  I don't have a lot of space on my internal hard drive.  I just got a backup unit portable 500 GB.  After that I backup everything, what should I do next to create more space on the original disk of disk space?

  Hello

  Here are some steps to free up the memory of hard drive on your computer.

  Method 1: how to optimize disk space everything back to the top
  http://Windows.Microsoft.com/en-us/Windows7/what-backup-settings-should-I-use-to-maximize-my-disk-space

  Method 2: perform cleaning disc.

  Delete files using disk cleanup
  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup

  Hope this information helps.
  Please respond back with the State of the issue and let us know if you have any questions.

• Firefox said I need Windows Media Player 11 and it is already on the computer. How can I get Firefox to see?

  What is said. Windows Media Player is already installed on my computer, but it does not appear in the Plug-Ins in Firefox. How can I get Firefox to see my Windows Media Player?

  You must install the plugin available from http://port25.technet.com/pages/windows-media-player-firefox-plugin-download.aspx WMP

• Ikernel exe error installing civilization and I no longer have the cd of the system

  I need help, loading of civilization. When I try, I get an error ikernel.exe (xo10000) and the installation stops

  There is a certain different problems that can cause the ikernel.exe application error to live. You need to try to find out why you are suffering from this error. Take a look at some of the options below so that you can know whether or not this will cure your problem.

  1. Computer virus - a computer virus is a malicious computer program that installs on your computer without your knowledge. If you are experiencing computer viruses, then you will need to clean using a virus scanner. There are free antivirus that can be used. If you encounter problems using a scanner of viruses on your computer, then you might be able to solve the problem of starting in safe mode or to schedule a scan for the next time your computer starts.
  2. Missing system files - one of the most common reasons for this error is because some files are missing. The system files that could not be missed include Stdole.tlb, Stdole2.tlb or Stdole32.tlb. You must copy these to your original installation CD. Pop the cd of windows in the drive and start a command prompt by clicking Start, run and typing cmd. Type cd to go to the root of your hard drive.

  To expand the file simply type expand d: i386stdole.tl_ c:windowssystem32stdole.tlb where d: is the letter of your CD drive, c: is the letter of your disk hard windows and stdole.tl_ can be replaced by any other missing file.

• Dell 531 Vista Home Premium as long as the factory restore

  My Dell Inspiron 531 came with Vista Home Premium. I want to restore to original factory, which is stored on a partition disk of "D". Instructions say reboot and type "Ctrl F11". LTRC F11 will not prompt in BIOS - it restarts just windows. Hoe can I F11 to work?

  See this:

  Restore your Computer´s software to factory settings
  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=DSN_336966&isLegacy=true