I need urgent assistance in activation of Windows 8
Here's my situation:
So I bought a laptop comes pre-loaded with Windows 8 from Best Buy (active). More than 3 months, the PC became a little bug and I decided to reset my laptop through the recycling option in the settings > change PC settings > General > remove and re-install Windows.
After the reset, the laptop was functionally operational, but he always tells me to activate Windows. Entering settings > change PC settings > activate Windows, there is only one button saying "Activate Windows". The button does nothing and invites me to contact my local administrator (which is myself).
Familiar with the activation process, I then used Run then use slui.exe 3 both slui.exe 4. After you have manually entered slui.exe my Windows key 3, I get the error 0x8007007B syntax even if the system tells me that my product ID can be used before entering in. Furthermore, when I tried to use slui.exe 4, I am unable to select any country, because the option is grayed out.
From there, I went all and ran CMD with administrator privileges. After using chdsk and sfc/scannow, I typed in this order:
slmgr.vbs /upk (unpacked successfully)
slmgr.vbs-ipk [my product ID] (successfully installed)
slmgr.vbs /ato (now it tells me the error 0x8007007B once again)
Now, I'm quite blurred. How can I activate Windows when all my options are dysfunctional?
Help is very appreciated.
Loyal customer of Microsoft,
Nahoon
If Windows 8 comes with your computer, where you have the key?
Error 0x8007232b or 0x8007007B occurs when you try to activate Windows
http://support.Microsoft.com/kb/929826
With Windows 8, Microsoft changed stickers that have the product key that the user must type in during the installation of the operating system of new embedded BIOS product key. The idea is that by eliminating the tile, you eliminate one of the easiest ways for nefarious users get a legitimate product key. The sticker also eliminating product key removes any concern that the vignette could get damaged while at the same time eliminating the long and irritating the process of typing in various letters and numbers in the installation of the operating system.
If the user has to reinstall the operating system on a computer with Windows 8, the installation process automatically captures key software product of the motherboard BIOS without input from the user. This means that these stickers familiar windows product key will no longer appear on Windows 8 computers.
Tags: Windows
Similar Questions
-
I need urgent assistance please. I'm recharging my Creative Suite 6 to new PC. I have the serial number, but it says it is incorrect. Please, please help as I am in the middle of a project. Why, why? It is said that the serial number is not valid - I have tried several times.
Invalid License http://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html
-http://helpx.adobe.com/creative-suite/kb/invalid-serial-number-cs4.html
- and http://forums.adobe.com/thread/1038761
An idea that MAY work to install or run some programs in Windows 10 old... works for some, not for others
- or run as Administrator http://forums.adobe.com/thread/969395 to assign FULL permissions can help... said yet, but sometimes it is necessary for all Adobe programs (this is same as using an administrator account)
-
I lost my product key. Need help in the activation of Windows 7
I lost my product key and can not activate my system to 32-bit windows 7 Home premium for activation. I have a HP desktop computer and I need a usable product key, someone can help me.
Issue edited by the moderator to add clarity.* *.
Option 1:
If the COA sticker is damaged, you must use the recovery partition to reinstall Windows 7, it will be exempt from the need to use the product key to activate your installation of Windows 7.
Option 2:
If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling. This will exempt the need to also use the product key.
Option 3:
If neither options 1 or 2 is possible, then you will need to invest in a new license of full version of detail.
HP/Compaq
1-800-474-6836
-
I need Urgent assistance...
Hello
Currently, I'm working on the EAM module. Please find the EAM path-> tab WorkRequest
Work resuest tab I added a field through the customization and the element of the field's Message text style.
I extended seeded VO and I substitute. After that, I ran jpximport order... everything is going well so far.
If go to the application tab from there work I quried for assets that works very well after I clicked on the link number at this time, I get the error message is saying that
Not found message. Application: DNF, Message name: FND_VIEWOBJECT_NOT_FOUND. Chips: VONAME is BarrickAssetNumberVO;. APPLICATION_MODULE = oracle.apps.eam.workrequest.server.WorkRequestDetailAM;
can you please help me its very urgent.
Thank you
Sandrine.Hello
The name of the FND_VIEWOBJECT_NOT_FOUND Message means that the view object is not found in the Module of the Application. I think that BarrickAssetNumberVO is extended VO, AssetNumberVO of use instead of BarrickAssetNumberVO. It will work.
Thank you
Kumar -
Passport for blackBerry need urgent assistance
Hello world
I put my Passport today
But unfortunately, the screen is totally black shows nothing
Has got the sounds and everything but not screen
All solutions?do you get the trunk to the top of the screen after?
-
I need to upgrade the CPU, motherboard and Ram in my machine. Which will impact my Activation of Windows genuine?
original title: can I put my machine after GWA?It's a Genuine Windows Kit which is what you would be considered a retail license. In other words, that it is transferable to another computer, which means you have the right to support directly from Microsoft.
-
Need help with activation of Windows XP.
Original title: xp will not load properly
I tried to re - install windows xp on my hp mini computer with the windows xp disc gave me when I bought my hp mini. However, when the computer prompted me to enter the activation code of microsoft xp I refused. This has been for me not realizing the authentication of microsoft code was on a sticker stuck on the bottom of the computer. Now windows won't load properly and it will prompt you to activate me through microsoft and when I say yes the computer does nothing except load screen saver and nothing else. Glenn
Hello
Are able to use the hotkeys on the keyboard?
If so, perform the following steps:
1. press and hold down the Windows and R together.
2 type slui 4 in the immediate window and press OK.
3. the Activation of Windows Wizard will open.
4. follow the steps in the Activate Windows by phone dialog box, and then click Next.
Note The number appears now and differs based on the location you select.
When activation is completed and you receive the following message appears, click OK.
You have activated your copy of Windows.
See also: How to activate Windows XP
http://support.Microsoft.com/kb/307890
Let us know if it helps.
-
Is the necessary activation of Windows 98 now that MS no longer supports it?
Is the necessary activation of Windows 98 now that MS no longer supports it?
Hi esroger,
You only need the license key. If you need further assistance, see the following link:
http://support.Microsoft.com/W98
Thank you!
-
Product activation message Windows and I can not get a c prompt
After that a recent installation reboot update, the following message appeared "Windows Product Activation - a problem has prevented Windows to check accurately the status of the license for this computer. To keep your copy of Windows must be activated with Microsoft. You want to activate windows now? Yes No ".
Whether I click Yes it could restart the computer in verification mode of the disc and when the screen finally appeared was so the new message
I tried to restart under different modes and seems the same screen.
Finally got a safe mode screen and the followin message appears "Windows has no start because the following file is missing or corrupt: \system32\hal.dll
Please reinstall a copy of the above file" Note: I don't know how to get to a prompt c from here I rebooted the computer with the professional disc of Microsoft Windows XP that came with the computer and may have to reboot from the CD, but here, I tried 2 options F2 which asks for a Microsoft disk recovery Application that when he uses the Microsoft disk I get a blue error screen "STOP: 0xF78D2524, Oxc0000034, Ox00000000, Ox00000000 ' and told me to run CHKDSK /F
If I just allow it to run the CD it goes back to the root of the windows error.
Please tell me how to get rid of this virus
You posted a forum for users of the software program anti-malware for Microsoft Security Essentials (MSE).
Your problem does not appear to be linked to malware or MSE.
See the following thread: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system/windows-rootsystem32haldll-please-re-install-a/3edb97c5-a4d2-459a-a5fd-c5dd6d9b5418
If you need further assistance would suggest you try the Windows XP Forum:
http://answers.Microsoft.com/en-us
I hope this helps...
-
My windows is genuine but now ask my Active my windows
Original title: activation
my windows was genunie but now ask my Active my windows my computer dell inspiron laptop
Hello
You did it of any material changes or software on the computer before the show?
How to activate Windows 7 manually (activate by phone)
Click Start, then in the search box type: slui.exe 4
a. press the ENTER"" key.
b. Select your "country" in the list.
c. choose the option "activate phone".
d. staying on the phone (do not select/press all options) and wait for a person to help you with the activation.
e. clearly explain your problem to the support person.
You can also check the following articles to learn more:
How to contact a Microsoft Product Activation Center by phone
http://support.Microsoft.com/kb/950929/en-us
Activate Windows 7 on this computer
http://Windows.Microsoft.com/en-in/Windows7/activate-Windows-7-on-this-computer
Hope this information is useful. If you need further assistance, please answer and we will be happy to help you.
-
Need urgent help with the startup of the database
Hi all
I use oracle 10g on 32 bits of windower server.
I try to start my database today and it gives me error, and that's my production database.
I need very urgent help you. (I have no rman backup, and data are not n6cessoires so, since it is the practice of the student).
Kind regards.SQL> startup open ORACLE instance started. Total System Global Area 524288000 bytes Fixed Size 790180 bytes Variable Size 250343772 bytes Database Buffers 272629760 bytes Redo Buffers 524288 bytes Database mounted. ORA-01110: data file 34: 'G:\ORACLE\DATAFILES_ACADEMY\ACADEMY' ORA-01115: IO error reading block from file 34 (block # 1) ORA-27070: async read/write failed OSD-04016: Error queuing an asynchronous I/O request. O/S-Error: (OS 23) Data error (cyclic redundancy check).
Maahjoor wrote:
Hi dear,I need further assistance on your side, I restarted the server, but the same problem.
as there is a way to drop and re-create a system tablespace? given that the 34 file belong to the tablesapce system.concerning
N °
So just create a new database. Who will have every ten minutes. And to say that your students to create new storage spaces. Who will be the two minutes. -
Activation of Windows XP in the new computer.
-Old hard drive, the new Machine
I have a hard drive with Windows XP. The machine from Dell, in which it was loaded crashes - most likely a motherboard problem. I installed the HDD on another machine that has had its hard drive failure - virus suspected, etc.. The combination of 'new' hard drive with Windows XP and the Dell with the card mother work seems to work. I get the error that I have to reactivate Windows XP to connect. I can't connect Internet (I have not discovered why in this case) and the result by telephone (voice) says that ID is not on file (?) and gives a Web site for activation. I can't access the Web on the machine, and the Microsoft Web site with the "solution" has the answer in form of download - once again, not good because I can't access the Web with the machine in need of activation. The phone translates a computer, not a person. I changed nothing other than to remove the hard drive of a machine which does not to whoever's doing. What can I do? Thank you.
The operating system of Windows XP which is not the operating system on which was installed when you purchased the Dell hard disk from Dell? If so, it's probably an OEM version and as such is "related" to the system BIOS, it came with. It will not activate connected to a system with a different motherboard and a different BIOS. In addition, if an OEM, software license version is no longer valid because it is no longer used with the material with which it was purchased.
The reason why you can't get an Internet connection is bound. Since the XP system on the hard drive has been used in the Dell system, it is configured to be used in the Dell. There the drivers for the Dell hardware installed. You will need to identify the current computer's ethernet card, download and install the appropriate drivers for this card.
It is a method for activation of the phone:
How to activate Windows XP by phone:
To contact a Microsoft customer service representative to activate Windows by phone, follow these steps: 1. Click Start, point to programs, point to Accessories, point to system tools, and then click on activate Windows.Or,
1. click on the Activation of Windows in the notification area icon.
2. click on Yes, I want to telephone a representative of active windows customer service now.
3. click read the Windows Product Activation privacy statement, click back, and then click Next.
4. follow the steps to activate Windows by phone dialog box, and then click Next.Good luck
Tom Ferguson
-
Activation of Windows after the end of support
The question is what will happen with the activation of windows once microsoft stops supporting windows vista or other windows like windows 7?
For example, that I will continue to use vista for older games and software, but sometimes there is no need to reinstall if something is wrong (I had problems with the updates and reinstaled vista, after that it works well). And my scanner is not scanning software for windows 7, so I need old Windows.
The question is what will happen with the activation of windows once microsoft stops supporting windows vista or other windows like windows 7?
For example, that I will continue to use vista for older games and software, but sometimes there is no need to reinstall if something is wrong (I had problems with the updates and reinstaled vista, after that it works well). And my scanner is not scanning software for windows 7, so I need old Windows.
Hello
You will be able to re - activate Vista, etc. If you have to do a reinstall.
Support extended for Vista stops in 2017, but the Vista license is still valid.
Here is a list of the dates of extended support.
"Technical details of the life cycle Windows.
http://Windows.Microsoft.com/en-AU/Windows/lifecycle
If you ever have problems activating the reinstallation, use phone activation method:
Example:
"How to activate Vista normally and by Activation of the phone '
http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html
See you soon.
-
Activation of Windows Vista phone number phone
I am trying to activate Windows Vista on my brother's computer, but there is a problem when I send the Activation of Windows code. I get this error message,
"The product key you entered will not work with this edition of Windows Vista. «You need to run the Windows Vista Setup program or enter a product key of Windows Vista Edition Home Premium»
The hard drive failed on this portable DVD and backup he had was corrupt. I had to use another disk to configure the computer to reinstall the operating system. This drive is now half a continent away. I tried for two days to get the order slui.exe 4 at work. But instead of giving me the phone activation option requires that I enter the product key. Which then brings back me to the message above. My question is how can I access the phone activation? How can I get the phone number so I can activate this operating system? We are just south of Dallas in Texas.
Can someone help me solve this problem?
Thank you, Tim
I am trying to activate Windows Vista on my brother's computer, but there is a problem when I send the Activation of Windows code. I get this error message,
"The product key you entered will not work with this edition of Windows Vista. «You need to run the Windows Vista Setup program or enter a product key of Windows Vista Edition Home Premium»
The hard drive failed on this portable DVD and backup he had was corrupt. I had to use another disk to set up computers to reinstall the operating system. This drive is now half a continent away. I tried for two days to get the order slui.exe 4 at work. But instead of giving me the phone activation option requires that I enter the product key. Which then brings back me to the message above. My question is how can I access the phone activation? How can I get the phone number so I can activate this operating system? We are just south of Dallas in Texas.
Can someone help me solve this problem?
Thank you, Tim
Hello
If you have used, for example, a Dell disc on an HP machine, phone Activation will not work.
______________________________________________________
There are several methods to reinstall Vista.
This can help you (download files and make your own DVDs):
http://www.heidoc.NET/Joomla/technology-science/Microsoft/57-Windows-Vista-direct-download-links
And here are instructions on how to burn ISO disk images:
http://www.SnapFiles.com/get/isorecorder.html
The download links and information on how to make the ISO file, and then create the Setup DVD above are at this link:
"How to download a Vista ISO and create a Setup DVD or USB"
http://www.Vistax64.com/tutorials/301852-Vista-ISO-download-create-installation-DVD-USB.html
"How to create a USB of Vista Installation key '
http://www.Vistax64.com/tutorials/181538-USB-bootable-Vista-installation-Flash-thumb-drive.html
___________________________________
You can contact your computer manufacturer and ask them to send you a set of recovery disks.
They should do this for a small fee.
To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:
You need to change the Boot order to make the DVD/CD drive 1st in the boot order:
How to change the Boot order in BIOS:
http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm
"How to replace Microsoft software or hardware, order service packs and replace product manuals.
http://support.Microsoft.com/kb/326246
___________________________________
And if you have never received a recovery disk when you bought your computer, there should be a recovery on the drive Partition hard reinstall Windows how much you bought your computer.
The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)
Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.
Them or us ask the right sequence of key.
___________________________________
And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.
Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.
If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.
___________________________________
Some manufacturers have more available Vista recovery disks.
If this happens, you may need to try this instead:
You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.
Other manufacturers recovery DVDs are should not be used for this purpose.
And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs
Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:
"How to do a clean install and configure with a full Version of Vista '
http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html
And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.
And phone Activation may be necessary when you use the above installation method.
"How to activate Vista normally and by Activation of the phone '
http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html
See you soon
-
Activation of Windows & Validation problem
I just got an email reply on my post about the issue of Validation. I was told to type slui.exe 4 into the search box on my
window and change the country. When I reinstalled my window, I activated my software thru' a phone automated 18003248098 & + 653248098. Before that the window can be activated, he had invited to choose my country, and I carry out the order.
Is it law indicating that I need to activate my windows twice whenever your update came to my system?
This isn't the first time I've been quick activate my software once I activated. Why not tell anyone what was wrong with
WINDOWS UPDATE OR MICROSOFT UPDATE?Hi danlsk,
· Update has been installed on the computer that you have been invited for the activation of Windows?
I suggest you to take a look at the following links in the article and see if it helps:
You are prompted to activate Windows Vista after you install a service pack for Windows Vista
I hope this helps.
Maybe you are looking for
-
I have a computer laptop g60-635dx. can I upgrade the graphics card on this laptop?
I have a computer laptop g60-635dx. can I upgrade the graphics card on this laptop?
-
MFP HP LaserJet Pro 400 M425dn will not print the text to format 72 points or more
My workplace has recently bought a M425dn of MFP HP LaserJet Pro 400 all-in-one printer. It works perfectly except for the fact that it will not print text that is 72 points or larger in size. I tried many fonts that are installed with Windows, and a
-
Unable to download music from itunes
Original title: Itunes I have problems downloading my music I bought from the iTunes store. He said that I had to activate something. How can I do?
-
Can someone tell me what this means and how to fix it? Thank you!
-
Hi, I tried to record my modem/router, since I bought it but my S/N keep rejected as incorrect. I also tried through one of the Linksys online support and they do not have too. What is the problem please? Gambas