I/o device error series Equium

Similar Questions

• Equium A100: Disc D is not accessible - i/o device error

  I recently bought a box of 50 masterpieces of Mozart CD. I want them on my drive hard, but every so often, I hear the whirring autour CD in drive D: but it then stops and no further action takes place. Equium A100 does not recognize the disc: no disc in drive D:! If I go to my computer and click on D:, I get a warning "D:\ is not available..." I/o device error."

  This only happens with certain CD; others are fine. Could I do something wrong? Any help would be appreciated.

  Peter

  Hello

  > This happens only with CDs; others are fine. Could I do something wrong?

  Hmm in my knowledge, not all CD and DVD are compatible and taken in charge and sometimes could happen that the drive can not read some CD.
  It is not impossible

  Maybe the firmware of the installed disk does contain all the details of manufacturing of CDs and properties and, therefore, the lens of the drive can not calibrate and manage the inserted CD.

  I found in my manual to the user a list of CD and DVD compatible and supported.
  There you should find the different manufacturers that produce a compatible media.

• Dosen't work drive Equium L20-198-IO device error

  HI I HOOPE SOMEONE WILL HELP ME

  I HAVE THIS LAPTOP FOR 6 MONTHS
  EVERYTHING WAS OK UNTIL NOW, MY DVD DRIVE IS NOT WORKING AND I SEE A MESSAGE
  "THE REQUEST COULD NOT BE PERFORMED BECAUSE OF AN I/O DEVICE ERROR

  HELP PLEASE

  Hi Katarzyna

  I studied a bit in the internet and found this useful Microsoft page:
  You receive an I/O device error message when you try to use your CD-ROM drive in Windows XP
  http://support.Microsoft.com/?kbid=891894

  Check this suggestion.

• Satellite P30-145-IO device error

  My problem is with the so-called player super multi, when I insert a DVD - RW I get i/o device error, I tried other brands and CD also with the same result.
  It works very well with the 'true' DVD but not the accessible variety in writing.
  I tried using Microsofts IE. the whole thing of IDE ATA/ATAPI controllers with nothing does not.
  Can someone help with this frustrating dilemma?

  [Edited by: admin]

  Hello

  As far as I know there is no one-size-fits-all solution for this type of problem. Try to remove the device from Device Manager, and then restart the device.

  You have this problem for a long time?

• HP Jet 7, 8.1 Win Win 10 update and Bluetooth "devices errors."

  I did the upgrade from 8.1 to win to win 10.  So far, I've noticed all my devices Bluetooth "devices errors."  I have deleated all BT devices and tried to charge the BT device to my soundblaster roar 2 and a simple generic keyboard and I got the same results. I have tried reconnecting with other devices.  Did someone went down this path? HP, Microsoft, suppliers... has a driver upates?  I have not read on win 10?  Device Manager will be my frined here, deleting and reloading BT associated drivers?  What do you say?

  Hi, Yes, my bluetooth mouse works fine on my Stream with 10 Windows 7, device drivers are available from hp.com.  You could try to reload the driver bluetooth of Windows 10.

• Tecra A4 PTA40E: DVD rom IO device error

  I have the portable Tectra A4 PTA40E. When I insert a disc into the DVD Roam driveand try opening. I get an ie error message is D:\is not accessible. The request could not be performed because of an i/o device error.

  I reinstalled the driver, dosent them work again.
  Help, please
  Thank you very much

  Hello

  It looks a bit like a hardware problem but first try them all these common advice;

  First try to remove the drive from the Device Manager and restart the laptop. Windows should recognize the CD/DVD drive and re-install the drivers.

  If this does not help, you must check this document knowledge of MS;
  You receive an I/O device error message when you try to use your CD-ROM drive in Windows XP
  http://support.Microsoft.com/?kbid=891894

  According to this MS document, you should try to change the Transfer Mode to DMA to PIO and back.

  I hope it helps

  PS: this forum thread might be useful:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24203&MessageID=88868

• Qosmio G20: device error - "no audio device found".

  Audio device error showed "no audio device has been detected" and seems to have lost the link to the audio device. Any advice on how to restore this lost link please

  Sorry, but your description of the problem is really more than ridiculous. Explain what is exactly the problem, and when this error message occurs.

  Do you use external device or what?

• Qosmio G20 - DVD RAM i/o device error

  Hello

  I need help.
  My dvd ram driver do not work dvd.

  When I run the dvd he told me "the requested could not be performed because of an i/o device error" and I don't know how to fix it.

  Try to remove the optical drive from Device Manager, and then restart your laptop.
  The reader should be recognized again and correctly installed.

  Please try to test again the feature with CD or DVD media.

  You can use ODD as boot device?
  ODD is displayed correctly in Windows Explorer?

• On Satellite A100 DVD drive is not accessible - i/o device error

  I have a Satellite A100 - 01 G, but the CD/DVD drive is not accessible when I try to open the files on a disc. When I try to run a disc I ge "the request cannot be performed an i/o device error.
  When I click on the drive icon it says that the application is not found.

  Help, please.
  Thank you

  Hello

  Have you tried to update the CD/DVD drive?
  You could go to the Device Manager and could remove the reader of CD/DVD from the list of devices.
  Then, you must restart the laptop.
  After restarting again the Windows operating system will recognize the new device as the CD/DVD drive and will initialize and reinstall the driver.

  Then try using the new CD/DVD drive

• Satellite A110: D:\ is not accessible - i/o device error

  im getting a message saying d:\ is not accessible and then below it says the request cannot be performed because of an i/o device error can someone help me with this please

  Post edited by: willvila

  Hello, William

  I'm not 100% sure but I assume that you have problems with ODD (optical disc drive)? Am I right about that?

• No boot device error - early 2014 Macbook Air

  Forgive me if this has been posted elsewhere, I could not find another post as of yet with my set of circumstances.  I have a Macbook 2014 as shown air above 10.10.5 running and have had installed Boot Camp and windows 7 working for more than a year.  Recently, I tried to boot into boot camp and got the dreaded "No. Bootable Device" error.

  When I go to the startup disk in the settings I see BOOT CAMP Windows option to restart, but I get the above error when I restart.  When I restart and hold down the option I am not isolation presented with the option to boot into Windows or bootcamp.  I can see the boot camp partition in finder and disk utility.  I tried to create an installation disk Usb 2.0 with the latest version of windows software support in the Boot Camp Assistant.  I tried to use this drive to try to repair the disk, but cannot use the touchpad or keyboard or external keyboard.  Tried to use a player great external mac with a windows 7 dvd and had all the same problems.  I tried swapping usb ports and don't have anything yet.  I read somewhere that this could be a problem with the Usb 3.0 ports and drivers with windows 7.  Now I'm at a loss on how to recover it without having to reinstall.

  If I can see the data of the boot partition might be the problem?  I don't know what to do next. Any help would be greatly appreciated.

  Beginning 2014 Macbook Air 6,2

  Core i7 1.7 ghz

  8 GB Ram

  Can you post the output of the following commands in OS X Terminal?

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  The "sudo" commands will prompt to enter your password, and there do not appear to come back. You can also see caution against improper use 'sudo' and the potential loss of data due to an "abuse" of the order.

• Runtime error and IO device error

  Im having problems with my computer toshiba laptop. When he starts a message appears saying: runtime error you can just click OK and it goes away, someone has an idea about this?
  I also can not put off software cd-rom on my laptop as a message saying not accessible, i/o device error is displayed when you click on the cd drive.
  I'm useless with computers and don't know what to do!

  Hello

  Go to Device Manager and remove the cd player. After restarting the OS unit should recognize the drive again.
  Please post again if the problem occurs after this procedure.

  Good bye

• HP Pavilion all-in-one 200 pc: unknown device error

  Hello

  I can't update all devices, the following problem

  unknown device error.

  Hardware ID are:

  ACPI\TE8715

  * ITE8715

  Location on Intel ICH10 LPC Interface Controller 3 a 18

  unknown deloper, no driver available!

  Thanks for the tips.

  Hello:

  This is your ITE CIR receiver.

  Unfortunately, I do not know where you can find a W7 driver for it.

  Try Windows Update of the device - automatic driver search.  Be connected to the internet.

  Description of the model you posted draws upward of way too many models for me determine which one you actually.

• Connection problem-NOR-488 GPIB: connection to the driver or device error

  Hello

  I am trying to connect with my tunable laser "Santec" by GPIB-USB-HS. I received the file VI Labview (instrument driver) for my model of tunable laser STL-210 http://sine.ni.com/apps/utf8/niid_web_display.model_page?p_model_id=2791 . When I run any VI, for example the "laser_on_off.vi" file I received the error message "NOR-488: connection to the driver or a device error. I checked the 'measurement and automation explorer' and Communicator of NOR-488. 2 gives me the following message appears when I send "interrogate" send string * IDN?

  ----------------

  It is meaningless.

  You have to step way back. The Setup instructions for the GPIB-USB-HS shows you first run diagnostics. Finally, you have done this and got a failure. That's why you get "NOR-488: connection to the driver or a device error. Until the diagnostics pass, you lose everything just your time with anything else. Please provide details on the failure when you run the diagnostic tests.

• I am trying to download images from a compact flash player map, but every time my computer shows i/o device error. What does that mean?

  I am trying to download pictures from a card compact flash player map, but every time my computer shows i/o device error. What does that mean?

  Hi Richard,

  1. what version of Windows you are using on the computer?

  2. have you checked if the problem persists in a different USB port and in another computer?

  3 - is the card compact flash not detected in Device Manager?

  A Secure Digital or SD memory card is a device of small portable storage usually used on a digital camera or camcorder, cell phone, or computer system. When you use the card, you may sometimes experience an IO error. The term "i/o" is refers to an input/output error and may involve the SD itself card or the card reader you are using.

  Try these methods:

  Method 1: Try to run the hardware troubleshooter and check what the problem is and fix it accordingly.

  Follow the link below a convenience store opened.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Eject the SD card in the card reader and check the writing on the side protection tab. This tab should be in the up position; otherwise, you will not be able to save all data on the card. Also check the connection between the computer and the SD card reader. If the card reader is not properly connected to the computer, you will receive error messages when you try to use the SD card or your computer does not recognize the card.

  Response with more information to help you. Back to us for any problem related to Windows. We will be happy to help you.