I pressed "do not open pictures for this device" for when my iPhone connected. Now, I can't seem to find a way to import photos from that device because my phone is not displayed. Can anyone help?

Similar Questions

• I have trouble understanding how the calendar for the vi simulate Signal Express. Can anyone help?

  I'm generating a signal to 100,000 samples per second. The frequency is 4 Hz. I then pass the signal through the basic vi trigger detection to find out where the wave crosses 0.5.

  Since the signal is 4 Hz, the waveform should cross 0.5 each 0.25 sec. However, when I created a table of the times that the trigger is activated, it is not 0.25 seconds.

  I don't know if there is a problem with my calculation of the duration of simulation, or if I don't understand how the vi signal simulation works. Thank you very much for your ideas!

  Yes, you made a few mistakes or bad assumptions about who express vi.

  The frequency is 4 Hz samples per second is of 100,000 samples (orders of magnatude) generated too high are 76 (0.76mSecs worth of data).  1% duty cycle so a transition product only once every thousand loops! 1315 or 1316 loops between L - H transition to be more precise

  Try

  40 s/s

  40Samples (a seconds of data)

  right to 50%

• is 213:19 of error when you try to install LR can anyone help with this?

  LR6 purchased today. Updated to windows 10 computer last week. I can't open LR it says error 213:19 everytime I try. Ive tried to change my permissions and tried to open as administrator.
  don't know what to do.
  any help would be appreciated,
  Thank you

  -Sara

  Hi Sara,.

  Please restart your system, then rename the following folders:

  • SLStore:

  Navigate to C:\ProgramData\Adobe\ and rename SLStore to SLStore_old

  • SLCache

  Navigate to C:\Program Files (x 86) \Common Files\Adobe and rename SLCache to old SLCache_

  And then try to launch Lightroom.

  Please let us know if that helps.

  Concerning

  Sarika

• New iPhone 6. I would like to download some photos from my iMac to the phone.  Please, any ideas to help me?  Thank you.

  I have an IPhone brand new 6 + and some photos on my IMac I would put on my phone, but don't know how to do it.  I have one would appreciate any help.  Thank you.

  Everything you want to put on your device must be first in iTunes, so you can synchronize data from your phone.

  Please download iPhone to iOS User Guide 9 by Apple Inc. on iBooks. The Complete Guide to transfer your content to a new iPhone, iPad, or iPod touch.

• With the help of LPX 10.2.2 do a song with 6 midi channels. The editor now displays only one channel, any track I've highlighted that this track midi notes in particular will appear. Can anyone help? Thank you.

  LPX 10.2.2: I'm doing a piece with 6 midi tracks.

  The editor only displays the Track5 any track I've highlighted. Cannot change other tracks.

  Can anyone help? Thank you.

  You select the track header, or you by selecting the region in this way you should be?

• How can I get a google font (Capriola) in Muse. I pasted the code in the head of html, but the police will not be displayed. Can anyone help with teamviewer?

  How can I get a google font (Capriola) in Muse. I pasted the code in the head of html, but the police will not be displayed. Can anyone help with teamviewer?

  This is kind of a hack, but it will work.

  1. you will need to download a copy of the Capriola on your computer and install it as a system font. Google Fonts will allow you to install it as a system font in some methods (download a.) (ZIP file, synchronization with SkyFonts or downloadable on the project in Google Code). Edit: the simplest is to add the font to your collection of fonts in Google and then download one. ZIP file of your font collection.

  2. the font squirrel website has a generator of quality web fonts. It may take a font installed on your computer system and generate all the files of web fonts needed him. Place the web font files in the folder of your Muse project where you want to store the web fonts self-hosted. Use the add web fonts in Muse and select the tab fonts self-hosted.

  IMPORTANT: Please read the license terms for any font that you want to use on your website. Fonts Open source as Capriola may seem safe to use at first, but the developer of fonts may have some requirements, such as the display of a link to their web site somewhere in your own site. Other fonts may have monthly limit on number of pages seen.

• Safari throws "Safari cannot open page because the server is not responding" error for most relationships other than Facebook, Google, Youtube and a few other sites on my Macbook Pro. Can anyone help?

  Safari throws "Safari cannot open page because the server is not responding" while Chrome throws an error "this site is not reachable, connection timed out" for most relationships other than Facebook, Google, Youtube and a few other sites on my Macbook Pro. Sometimes, however, I am able to get the site on Google and access one page other than the home page and everything on the site works fine afterwards. I use a Macbook Pro OS X El Capitan (10.11.5) running. Can anyone help?

  Test in safe mode, if it works back to the normal mode safe mode start-up to test again.

  Try safe mode if your Mac does not end commissioning - Apple Support

  Let us know if the problem occurs in mode without failure or even once after start in normal mode.

• The 1068__I spooler error do not know how fix this problem can anyone help?

  I get the spooler error 1068, I said buying registrybooster2010 but which costs £20.00 and nothing helped!  I need to get this sorted ASAP, can anyone help please

  Hello

  Registry Booster and similar programs are all hype and snake oil, they can fix practically anything and
  often the cause of big problems on their own. Request your refund.

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  If the above didn't help:

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  Print Spooler service
  http://www.blackviper.com/WinVista/services/Print_Spooler.htm

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows 7 build 7600 this copy of Windows is not genuine. Can anyone help?

  I changed the hard drives on my computer because my old computer broke down on me. Now, I get a Windows 7 build 7600 this copy of Windows is not genuine. Can anyone help?

  You use a key of windows 7 OEM SLP but your bios has a marker of Vista.

  Your bios date 17/02/2009 is too old for a marker windows 7.
  I suspect that you tried to move the license OEM windows 7 on another computer. An OEM license is not transferable.
  You can buy a new copy of windows 7.
  Additional information:

  Computers, which are built by large manufacturers provided with pre-installed Windows are supplied with 2 two product keys:

  (A) OEM SLP: this key comes pre-installed in Windows, when it comes to the factory. This key is designed to work with the special instructions isn't on the hardware of this manufacturer. Then, when Windows was installed using the OEM SLP (in factory) Windows 7 key leans on the motherboard and he sees special instructions and activates. (that's why you had no need to turn on your computer after you brought it home)

  (B) SLP COA: it's the product key that you see on the sticker on the side (or at the bottom, [or in the battery compartment]) of your computer. It is a valid product key, but must be used only in certain situations (for example, if the OEM SLP key stops automatic activation for a reason any). The key must be activated by phone. (Note: all manufacturers that use the SLP OEM system are bound by contract to include a certificate of Authenticity sticker (COA), which has a COA SLP key, on the computer)

• My settingstool PMB does not react. It checks a video environment for hours. can anyone help?

  My settingstool PMB does not react. It checks a video environment for hours. can anyone help?

  According to your photo/camcorder camera model there could be a more recent version of the software available. In fact, PMB is no longer supported and has been replaced by original game, memories. Please look for your model on the Sony esupport site to see if new software is available for your device.

• The system administrator has defined polocies to prevent this installation for the game Assassin's creed 2... can anyone help?

  The system administrator has defined polocies to prevent this installation for the game Assassin's creed 2... can anyone help?

  Try right click on the setup.exe > run as admin.

  See you soon.

  Mick Murphy - Microsoft partner

• Installation update for creative cloud can never exceed 2%, which means that I cannot have access to Premiere Pro. Can anyone help with this?

  Installation update for creative cloud can never exceed 2%, which means that I cannot have access to Premiere Pro. Can anyone help with this? I need urgent access to Premiere Pro, so I can return videos to my clients.

  Check your (win) Task Manager or activity (mac) for a suspended adobe monitor helps the process that you can complete.

• My "installing update" is frozen at 0% and will not do anything else. It has been like that for about an hour. Can anyone help?

  My "Installing Update" bar is stuck and frozen at 0% and will not do anything else. Can anyone help? For about an hour.

  Hi Nathrotep,

  Close all processes mentioned below, re-launch creative cloud and share the results.

  • CreativeCloud
  • Adobe CEF Helper"
  • Service Office of Adobe
  • AdobeIPCBroker
  • Creative cloud
  • Installation of Adobe
  • AdobeUpdateDaemon
  • AdobeServiceInstaller
  • AAM Update notify
  • CCLibrary
  • node
  • The basic clock

  @KateGee, error code, try 201: troubleshoot Adobe Creative cloud download, install and update questions

• Illustrator draw android app says that it requires 4.3. I have a viking RCA pro 10.1 which is 5.0, but it says that my device is not compatible. Can anyone help with this?

  Illustrator draw android app says that it requires 4.3. I have a viking RCA pro 10.1 which is 5.0, but it says that my device is not compatible. Can anyone help with this?

  HI JBlessed,

  What is a Tablet? Because the draw is not yet supported on Android tablets.

  Sue.

• Elements of Photoshop 7 new download does not accept my serial number for 2009. Can anyone help?

  Elements of Photoshop 7 new download does not accept my serial number for 2009. Can anyone help?

  Mac or Windows and EXACTLY what version of the operating system?

  Recent Mac AND Windows operating systems have been known to cause problems "weird."

  Are you using a computer administrator account will be full read/write permissions?

  I don't know if what you have is included in the link below, but take a look

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  You MUST use the special version and the serial number on the page, not your original drive or serial number

  NOTE that CS2 will not install on a "modern" with an Intel Mac

  When you install the special version of the PPro2 on a Win7 or Win8 or Win10 computer, you may need to right click on the program icon and select compatibility Windows XP in the popup of option