I put my speakers or a microphone to go into the sound is terrible, and he put me on a blue screen that says crash dump HELP

Similar Questions

• His record game, my microphone is picking up all the sounds around me and to transfer them to my helmet.

  original title: his record game

  For some reason, all listening to ANYTHING on my computer with my headphones Bose, which are designed to eliminate all surrounding sounds, I hear all around me, including Tape this message, as if my microphone is picking up all the sounds around me and to transfer them to my helmet.  I have accidentally done to cause this, please?

  Thank you!!!

  Hello

  Click with the right button on the speaker near the right lower clock - recorders - then right click in the BOX
  and check also show a disabled device and show disconnected devices. Then double-click on your microphone and
  on the levels tab - MUTE it. You could also experiment with using a level lower or less thrust on this
  same tab.

  Connect a microphone, music player or other audio device to your computer - see 'connect a microphone.
  to your computer"which has an image of these parameters.
  http://Windows.Microsoft.com/en-us/Windows7/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Is it possible to put the speakers as the default output for the sounds of Windows and the headset as default device for music?

  Hello

  Is it possible to have all the sounds through the speakers, including music from WMP and WMP music in my headphones? Headset is USB (but I also have a Jack) and my speakers are with 3 Sockets at the back of my pc.
  Thank you.
  Friend,
  Zoenvisje
   
  Original title: all sounds through loudspeakers and music through headphones

  Hi zoenvisje,

  Thanks for posting your query in the Microsoft Community.

  Want to know if it is possible to play any sound on the computer with the headset. It can be difficult when something that is important to you does not work as expected.

  Method-

  It is not possible to make these changes on the computer.

  You can set a default speakers and use a different music player that supports select the default output as the headset device.

  We know if you need help. We will be happy to help you. We, at tender Microsoft to excellence.

  Thank you.

• updated 7.3 to 10.0.1 on iPhone iOS 5 in the messages, I can't put the phone in a horizontal position in order to enlarge the keyboard more. a field opens with the font script styles and I can't get off my screen, to get at the larger keyboard.

  I just upgraded my iPhone iOS 5 7.3 iOS 10.0, now when I use my e-mail, I can place my phone horizontally to get the larger keyboard is no longer and use my thumbs (many more fast typing). Now, I get a "field" with scripted, for styles to close since fonts. There is an icon of a 'keyboard' if I type nothing happens. Clues? your help will be greatly appreciated.

  Bill

  Pressing this icon small keyboard should work (done on my iPhone 7). Until someone answers with more information, another thing you could try is to open the keyboard when the phone is vertical and then put it too horizontal.

• Reading through computer speakers, even when headphones are connected to the sound

  Hello
  When I connect my headset to my dell ispiron 1545, the sound is played through the speakers of the laptop,
  nothing will stop it doing this
  In my playback devices I have

  Speakers/headphones
  IDT high definition audio CODEC

  Independent (RTC) headset
  IDT high definition audio CODEC

  -------------------------------------------------------------
  When I turn off the speakers/headphones, I have NO SOUND at all and I have a small speaker with an x in the corner
  nothing allows me to set the helmet as a defauld, when he says to set as default, nothing happens, as it won't let me change anything in the
  IDT Audio Control Panel
  Also, I am an administrator
  PLEASE HELP AS MY LAPTOP SPEAKERS ARE RUBBISH

  Hello

  Follow the steps in this article and see if the problem still occurs.

  http://support.Microsoft.com/mats/NO_SOUND
  See also: http://windows.microsoft.com/en-US/windows7/Tips-for-fixing-common-sound-problems

• I have problems with my audio new laptop second hand when I plug in external speakers, it's as if some of the sound is missing. Can anyone help?

  Problem: Sound is missing for example hand singing on a piece of music.
  Laptop: Compaq Presario C700/C731TU
  Sound: High Def Conexant Smart Audio 221
  Version 4.42.0.50

  I tried updating the driver and also searched through preferences and settings but have not found a solution, this is the first place where I've been since then. IT all works very well by means of edge speakers, but even a standard set of headphones seems to miss her.

  Thanks for you suggestion, I did since then and he said that everything was working fine. I also tried a number of other suggestions from other sites, without success. I then went to do a physical inspection and when I unplugged the audio cable I noticed that the ring of metal around the entrance of my helmet was missing, I told the person, I bought the laptop. Fortunately he found on his ground, not knowing what it was and put it on the side of "just in case". I have re-installed and the whole works fine. So if someone else is reading this and is not able to resolve a similar audio problem with something to do with the software, look at the finer physical details. It could be as simple as that.

• Why my external speakers does not connect? I followed the instructions from microsoft and it happens that the 'device' is working properly.

  Speakers on my lappy (old dinosaur, sorry) not computer savvy works fine, but I can't seem to connect external speakers. I did the thang check sound and speaker and sometimes peripheral works properly, but it does not help at all,...

  Hello

  1. What is the brand and model of the speakers?

  2 are these speakers work on any other computer?

  Please follow the steps from the link below.

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

• The sound allows you to check the default speakers. However, some applications use some speakers while other applications use different players.

  I produce several channels on mogulus. (see http://theallyvideo.blogspot.com/)

  I use a HP desktop computer smart touch and a few laptops from Sony to run the application studio to mogulus.com.

  Use the mogulus studio, I can watch multiple video streams live as sources and monitor outgoing video as well. There's my video stream live from other computers/producers in 4 different States more video feeds of my two laptops. NOTE: see www.mogulus.com

  I am running Vista on all three machines. (I found that XP cannot handle 4 video stream, I got up to 9 with Vista.

  Audio wise, it has worked on all three computers.

  Mogulus studio, use Adobe to handle all audio and video.
  I can turn on or off the sound of my guests so I can hear them and coordinate that I then put on the air and see how long they need.

  The outgoing video monitor also has an audio mute button. When using the PC's built-in speakers, it's a MUST to mute the audio monitor outgoing when you go live, and then reactivate the sound when he in transmitting the other guests, or playing pre-recorded clips.

  I also have a Microsoft keyboard with maximum volume down and cut the buttons on my desk. Two Sony laptops have the same keys and worked perfectly, controlling the built-in speakers. The keys make it easier to mute the speakers to use the key mute in the studio during the 'live '.

  I had another option for speakers of inhibition to avoid the Larsen effect. It is to plug headphones into the headphone jack on the monitor.
  I could connect the headset, do some direct ads, spots a show pre recorded, disconnect the headset and wander in the 'studio' listening to the show through PC speakers.

  So far has worked flawlessly, with two small problems.

  • (1) I sometimes forgot to mute the speakers when I spotted my local webcam and microphone. This would cause comments as soon as I saw the video and it came out alive. The microphone pick up the sound from the computer speakers.
  • (2) the microphone integrated into the HP desktop computer doesn't have a good sound. The mic's Sony are OK, but too far from my mouth to provide good storytelling.

  I decided that the Microsoft LX3000 USB integrated boom Mic headset would be the perfect complement to solve these two problems. I bought three of them, so I would have them on computers cell phones too.

  I installed the LX-3000 CD according to the instructions. Then I plugged in the USB cable to connect the headset/microphone.

  The sound of the headphones was superb. The boom Mic on the headset is a huge improvement over those built in monitors or webcams.

  Mute the Mic and speaker volume up/down on the cord of the LX-3000 is a convenience too.

  Use the headset no sound PC speakers. So, the echo is therefore more a problem.

  Use of the helmet, it is not necessary to mute the speakers. They are now closed all the time now. So, I go live, make an announcement, then play a prerecorded segment.

  That's where everything went south.

  I take off the headphones so I can take a coffee. I realize that now, I have no way of controlling the segment recorded through the speakers. I have no way of knowing when the segment is about to finish and I need to rush to the computer to make the next segment or live announcement. Being attached to the PC by a foot 3 cord isn't good at all.

  I try to do what I did with the analog headphone. Unplug the headphones to re - turn the speakers.
  No luck there. The speakers are still silent.

  I plug the USB headphones in. NOW I have no sound through speakers or headphones. The microphone in the headphones works well. like the mute of the microphone on the cord of the headset. Reduction in the volume of the buttons on the headset cable move the sliders up and down in the windows sound mixer, but no sound anywhere.

  I re - start.
  Now I get sound from the earpiece. But, not the speakers. All the volume keys on the keyboard, monitor and headset cable + / up and down the volume sliders but have no effect on the speakers or headphones. The helmet is at full volume all the time and PC speakers are silent.

  I look in the Control Panel, "speakers". I see that the 'helmet' has a green check mark and don't "speak". I select speakers and press the button "default". The speakers now have a green check mark.
  No change...
  I reboot...
  Now, the speakers work, but the headphones does not work. Volume controls move the sliders, but do not effect the speaker volume. None of the buttons mute function.

  This is totally unacceptable. The only way to switch between speakers and headphones is through the re-booting the PC and Control Panel. Cannot do when playing a mixture of 15 the second live commercials ads and 30 seconds.

  This is where it gets weird.
  
  While in Internet Explore on the page of mogulus studio, or Flash media encoder, the outgoing audio monitor goes to the HEADSET. If I start another copy of Microsoft Internet explore and reveal my mogulus channel drive, the sound of it goes to the PC SPEAKERS.

  Looking at the volume mixer, I see that if I select the "peripheral" "as speakers SoundMax integrated Digital HD Audio", there is only one application, the 'Sound' volume control and control the sound of the IE. players page.
  If I select "Device", "Microsoft LifeChat LX-3000" I get two Windows sounds and Mogulus Studio applications"

  I get the same results on two laptops from sony.

  NOW FOR THE QUESTIONS.
  OK, so how can I tell Blender what applications go to what audio output?

  Can I set up so that as the studio flash applications will both headphones AND PC speakers.

  Can I make the speaker MUTE button on the keyboard and screen work as they did and set mute the speakers for PC only. That would leave the headphone speakers all the time.

  Except that how can I at least get the +/-and mute keys to work as they did.

  Thank you
  Bob

  Bob, you can proceed as follows which allows different devices to be chosen for different applications in Windows:

  Close all programs, are preparing to open the first program which will use headphones...
  -Right click on the Volume icon and select playback devices
  -Select the headset as default device and open the program that you want to use this device, it will play on the current default device (helmet)
  -Now right click on the Volume icon and select playback devices, set speaker to the default device
  -Open the program you wish to play on the speakers

  The original program will continue to play on the headphones and the second program will continue to play on the speakers.

  Because of the helmet to helmet USB when you unplug them this device is disconnected (uninstalled) completely, she's not as expected with analog headset.

  Where you disconnected the analog headphone the BIOS of the machine would automatically re - routing the sound to the speakers, I do not think, however, that a secondary feature differentiating the speakers in the headphones would be available in the playback devices in this instance.  This is due to the sound card as the primary and the only device in this case and the speakers/headphones being secondary speakers or all outputs simply.

  You will be able to mute/unmute/volume adjustment for all devices in the Volume mixer (the switch A B device with the menu of the device), but I'm not aware of a way to run a stream audio reading by another device using the commands of its standard Windows at this time.

• I have Annoying problem, I can hear the sound of the headphones and portable speakers...?

  I recently bought (Dell inspiron 3537), windows 7 64-bit (6.1 build 7601), more info on first image,.

  http://i.imgur.com/SBEezVe.PNG

  but I have a problem when I have a headphones connection to the laptop... the headset works well, BUT I can hear the sound of the headphones and computer speakers posing problem, I want to hear the sound of the headphones only, see the shot of images >

  http://i.imgur.com/lpkKxMp.PNG
  http://i.imgur.com/MXmP6FL.PNG
  http://i.imgur.com/WCpTZCI.PNG
  http://i.imgur.com/ikDKvr1.PNG
  http://i.imgur.com/UIYDAVD.PNG
  http://i.imgur.com/nsrreYQ.PNG

  can you help me please?

  1. open the Device Manager and right click on Realtek High Definition Audio.

  2 Select this option to "Update driver software".

  3. click on "Browse my computer for driver software".

  4. click on "Let Me pick from a list of drivers on my computer".

  5. put the "Show compatible hardware" check box if not already checked.

  6. in the list of devices, click on 'High Definition Audio'.

  7, click on "next".

  8. in the update driver warning box, click 'Yes' (the driver).

  Install the native driver. Immediately test the headphones/speakers.

  If the list of drivers to step 6 do not include "High Definition Audio" then please use the Windows system restore. It is quite safe to use because if you don't like the results, you can undo the restore operation.

• Satellite A660: the sound is still coming from the speakers even if headphones are connected

  Hello

  whenever I have connect headset I still sound emitting from Laptop speakers.

  I have looked in the sound options and realtek but can't see a way to fix this.

  It is forward in my old laptop.
  Michael

  Go to: "Control Panel."
  Click on: "Realtek HD Audio Manager".
  With the "stakeholders" tab highlighted
  Click on: "connector settings" (it's the icon of a yellow folder, in the shaded blue, on the upper side right of the screen)
  «Click here: "contextual dialog box enable auto «»
  Click: 'OK '.
  Connect headset
  What pop-up appears, select "headset" as connected component (NOT out line)
  Fact

• You can get the microphone to play through the speakers in vista ultimate x 64

  can I get an external microphone to play through the speakers with vista ultimate X 64

  Try the steps in the article below

  http://www.ehow.com/how_7286168_play-microphone-through-PC-speakers.html

• Cannot save one from speakers, single record microphone

  I have his problem, save online videos, my laptop has only a microphone as a recording device.  Is that what I can do to save the sound I hear?
  Thank you

  Hi grace,

  Windows will not register out of an input such as your microphone device.  He does not like your speakers output devices.  There is third party software that can do this, but you will need to use your favorite internet search engine to find.  Please let us know if you have any other questions.  Thank you. Shane
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Headphones + microphone does not when plugged into the headphone jack on Macbook pro.

  Hello

  I have a problem that has caused me a lot of irritation just because it seems so simple to fix, but Ive tried practically everything that I can think to do better and it has really improved.

  I was skyping the other day and I took my headphones into the headphone. They have a microphone in them. When I plugged hide them in, I could hear the other person, but they could not hear me. It was the first time Id used for Skype, but still, something must happen in this brief moment of ruin.

  So I did some research here and on google and I couldn't find much. The page here titled "Why slope my friend hear me on Skype" seemed to work correctly the first time, I followed his instructions, but to test it, I unplugged my helmet again. Once again, it fouling all upward. I even wrote the settings he was conducting (apple System Preferences) and Skype and when I put them in the way it was when it worked, it worked this time.

  Just to be clear, I fixed it, but then to test it, I took out my helmet again and it has stopped working and even with the same settings, it will not work. It's extremely frustrating.

  It will work when I plug my headphones into the audio jack, but then I can't out of my helmet, which defeats the purpose of having them.

  My headset is not broken and my helmet is not broken because I can listen to music through my headphones and use my headset to call my friend on my helmet.

  I feel that somehow, my helmet (which previously was transmitting my input headphone MIC perfectly) has become messed up somehow (I feel like there must be a setting or something that Im overlooking) and I just need to configure it to work at the time of entry and exit instead of having input/output divided between the helmet and the microphone port.

  I hope this was clear enough. Please do not hesitate to ask me any questions that you may find useful.

  I can't tell if it's a Skype problem or a problem of mac, but Im asking here just see what I can learn.

  Thanks in advance

  Too bad. I forgot the first rule to set anything on the computer: turn off and on. It works, but it seems absurd that something like that (what I think is something fairly common) would need to restart your computer.

  Well.

• Qosmio G40: How to get the sound on 4 speakers rear

  Here's the thing, 3 days ago, I bought the G40 model. I needed a laptop on which I can work with Photoshop, Illustrator and Corel Draw.

  When I bought it, I went on site update from toshiba to see what is new and what I need to be updated. Afterwards, I checked on a few other sites of manufacturers (realtek, nVidia, etc.) which is new, because they get the first pilots.

  I noticed that there is a new driver for sound card for this computer so I decided to donwnload it and run the drivers. Everything went well, but after installation I lost the option DolbySurround and instead of all 4 bass speakers, only 2 speakers worked so I decided its better to revisit the original Toshiba drivers.

  After that I downloaded the drivers from the Toshiba site, installed and put to day all, I noticed that the software for audio, downloaded from Toshiba site has no dolbysurround option. Help, please!

  Secondly, I also removed the TOSHIBA accessibility option, which is to control the 'F' keys After that, I can't turn the Touchpad mouse. Help, please? Ideas, suggestions?

  What to say dude. Seems to be something wrong with any system files or registry entries
  Why change something if you have no problems?

  Take my advice and never change a running system ;)

  So now your problem and some advice how to solve this stupid question!

  I would recommend to restore the operating system to the point of time at the beginning. Use the tool from Microsoft called system restore.
  Eventually, you know this tool since the MS XP OS.
  You should find somewhere in accessories.

  If this procedure is not enough, you could use the Toshiba Recovery CD and could reinstall the whole OS!
  But before you make the installation of the recovery CD don t forget to back up your important data! ;)

  Good bye

• Satellite L500 - the sound coming from headphones and speakers

  Hello world

  My problem is about sound.when I put the headphones in my laptop, the sound just two headphones and speakers.
  How can I solve this problem? If can't, I can't use my laptop in attendance.

  Hey,.

  What OS is currently installed on your computer?

  Is the headset itself works because you can listen to the sound with headphones so for now I doubt s a hardware problem

  In any case, perhaps the problem is only linked to its driver and updated it could solve the problem in your case, I would check the Web from Toshiba site to download the latest version.

  Check this box!