I ran CHKDSK, the report tells me I have problems with the file system, usn journal. ___

Similar Questions

• I have problems with pdf files, sent to me by e-mail, download doc on my canon printer and the creation of pdf file to send.

  Original title: pdf files

  I am running microsoft windows xp home edition 2002. I always have problems with pdf files, sent to me by e-mail, download doc on my canon printer and the creation of pdf file to send. I use microsoft works Task Launcher 2004 edition.

  Is there an easy way to pass so I can handle pdf files?  Can anyone help?

  Thank you Tim

  Hello

  Please provide us with more specific information on the issue. Your post is a bit confusing.

  If you need to open the PDF files, you will need to install a PDF reader.

  If you try to print in PDF format, you must install Adobe Reader.

  Reference: http://www.adobe.com/downloads/

  THIRD WARNING:
  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• I have problem with Muse files when you work at home with my laptop and when I open the files again in my work with my IMac.

  I have problem with Muse files when you work at home with my laptop and when I open the files again in my work with my IMac.

  I do: when I am uncomfortable with the laptop I save the files on the laptop, then on my external hard drive. Then, when I'm at work, I opened the drive, but the Muse says every time, that so many links in the 'active' is missing. And it takes a lot of time to get all the missing link. Like today I had to open a file of Muse from the external hard drive, and there are about 100 links that are missing.

  How can I solve this problem

  the best thing if you are a user of creative cloud is to store the files in a folder in your account of cloud instead of transferring the files from one computer to another.

  If you are not a Subscriber cc then Dropbox or iCloud will work as well.

• I have problem with a .iso file that when I want to use I face the error "the file name is too long.

  Original title: name of a file

  Hello

  I have problem with a file .iso that when I want to use I'm dealing with error "the file name is too long" and I can't use this file anywhere for example: vmvare ' untraiso and even if I cannot write to cd or make a boot USB.

  I don't know how fix it.how I rename the file iso, shorter that I can use?

  Please help me.

  Thank you.

  Right-click on the ISO > rename > give a short name

• The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume D: utility.

  However, chkdsk finds no problems, so what happens?

  Checking file system on D:
  The type of the file system is NTFS.
  Volume label is A RAID.

  One of your disks needs to be checked for consistency. You
  may cancel the disk check, but it is strongly recommended
  that you continue.
  Windows will now check the disk.
  Cleaning of minor inconsistencies on the drive.
  Cleaning 9 unused entries index $SII of file 0x9.
  Cleaning 9 unused entries index $SDH of file 0x9.
  Cleaning unused 9 security descriptors.
  CHKDSK checks Usn Journal...
  Audit of the USN Journal is complete.
  CHKDSK is verifying file data (stage 4 of 5)...
  File data verification completed.
  CHKDSK is verifying free space (step 5 of 5)...
  Free space verification is complete.

  244196000 KB total disk space.
  126454172 KB in 238052 files.
  109736 Ko 22501 index.
  0 KB in bad sectors.
  868124 KB in use by the system.
  65536 KB occupied by the log file.
  116763968 KB available on disk.

  4 096 bytes in each allocation unit.
  61049000 total allocation on the drive units.
  29190992 allocation units available on disk.

  He is so little known about your configuration - because the forums MS Answers do not ask for information, when a new question is asked.

  If you run some kind of RAID configuration, you might do better if you describe your RAID configuration and after the actual event that you see in the event log (is it event ID 55?).  Then maybe you will get some ideas of the Microsoft Support engineer who might actually work.

  You see just this event in the paper at random times or is it when you try to run a specific operation and if yes, what operation triggers the event?  Here is an article of MS to help get you started, but if you use Google to search for the error message, you can find more ideas:

  http://support.Microsoft.com/kb/246026

  If sfc/scannow solves your problems, I'll send you (or your charitable organization preferred) US $100.

  Here's how to publish events to the event to display the log files:

  If you double-click on an event, it will open a window of properties with more information.  On the right are black up and down arrow keys to scroll through the open events. The third button that looks like two overlapping pages is used to copy the details of the event in your Windows Clipboard.

  When you find an interesting event that occurred at the time of your question, click on the third button at the top and arrows to copy the details and then you can paste the details (right click, paste or CTRL-V) the text in detail here for analysis.  Remove all personal information from your information after you paste If you are forced to do so.

  If you paste an event, it will look something like this annoying system startup event:

  Event type: Information
  Event source: Service Control Manager
  Event category: no
  Event ID: 7035
  Date: 14/07/2010
  Time: 17:54:18
  User: Jose
  Computer: computer

  Description:
  The Remote Access Connection Manager service was sent successfully a starting control.

  To get a fresh start on any log of the event viewer, you can choose to clear the log (the log backup is available), and then reproduce your problem, then just look at the events around your show and troubleshoot events that are happening when you have your question.

  You can search for events on the World Wide Web and get ideas.  It's where people events they see and then to the top of their questions, ideas and solutions:

  http://www.EventID.NET/

  If you find your event in the discussion, the first idea or discussion does not necessarily mean it is the "answer" to your situation, so read through all the ideas to find the one that sounds more like your situation.

• How/where are the financial reports stored on the file system of the server?

  We recently lost a large part of our reports on our server. We cannot understand what the restore directory location in order to get these reports back. Where is the default directory for 11.1.2.2 financial reports? And in what format the reports are being saved?

  EN reports can be found in the file system of the operating system (o/s), but the EMP workspace hierarchy (folders, tree, etc.) are stored in the database of repository Hyperion bi +.

  On the system of operating system files, the reports are stored in RM1 folder under folder "C:\oracle\Middleware\user_projects\epmsystem1\ReportingAnalysis\data\RM1\root".

  The names of the reports placed here are UUID (identifiers of long - not the actual names).

  For example:

  When a report is created with the name 'My report' in Studio Financial Reporting, by connecting to the EMP workspace will be available in the name of financial reports/folder where it was saved.

  the actual report will be stored in a subfolder of the RM1\root folder on the file system.

  The file name will be a unique identifier (not the real name of the report is 'my report')

  It will be generated 'on the fly' based on various things such as the date and time on the server (i.e. 0000012f5af72b1a-0000-ec71-c0a8006c.00000130510b77bb-0000-5133-c0a8006c.1)

  The meta-data for this report ('My report', that is in the folder in the workspace, the date of the change of the report, permissions on this report, etc) will be stored in the Hyperion bi + DB as an object in an encrypted table. Financial reporting knows what metadata in the Hyperion bi + DB which corresponds to the report, in the file 'RM1\root' because all rows in the table for that object in the Hyperion bi + PB related to 'My report' will be referenced using the UUID of the file (for example 0000012f5af72b1a-0000-ec71-c0a8006c.00000130510b77bb-0000-5133-c0a8006c.1)

  Note: The location of the folder of RM1 differs with each facility's operating system.

• I have problems with the shopify widget in Muse. I have configured my shopify store, but when I placed the button 'buy' is didn't tell the product no availabe longer and does not appear when I'm writing the site.

  I have problems with the shopify widget in Muse. I have configured my shopify store, but when I placed the button 'buy' is didn't tell the product no availabe longer and does not appear when I'm writing the site.

  Please contact the original publisher of the widget.

  Thank you

  Sanjit

• The file system on the disk structure is corrupted and unusable. ...

  Dell Optiplex 3010
  WD5000AAKX

  Windows 7 Pro SP1 64 bit

  This is the drive that contains the operating system and was just replaced on 23 July. I restored the disk backups using Acronis True Image 2014.

  From July 25, I started to see

  The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume of OS utility.

  in the system (Source Ntfs, event ID 55) event log.

  I ran a CHKDSK /R on the disk and it reported no problem with the drive.

  Except for the scary messages in the system event log, I see no problem, but I also don't see these errors on the other disk in the machine.

  [I forgot to mention that the drive passes diagnostics pre-boot]

  What happens here?

  I see nothing in the article in PC Magazine directly addressed the problem. You were talking about the complexity and the possibilities of seriously screw things with True global Image?

  In addition, the link to the Microsoft solution irritates me to 'we're sorry, the requested page is not found.

  However, I think I found the solution, and it is quite related software.

  After scouring the logs of system events and application, I realized that the error I've been see is still bracketed by the subsystem VSS starts and stops and was almost always related to a backup operation or a virus scan.

  Some research (Google search, in fact) have allowed me to suspect that successful shadows of the disc were somewhat corrupt, so I simply deleted them (vssadmin delete shadows / for = c: / all). Since then, there has been no error reported, new instant shade have been created, and everything else works OK.

• iSCSI freeNAS failing to create the file system

  Hey guys,.

  IM pretty new to the present and iv tried to work this point for some time now...

  I got a box of freenas with an array of 5 TB in it... I would like to make a 1 TB logical unit number and mount it on my ESXi 4 server.

  my configuration is:

  FreeNAS < = 10.10.10.1 = > 2x1GB links using the FEC (Fast or channel) [10.10.10.0/24] < = 10.10.10.2 = > ESXi

  I managed to configure the FreeNAS successfully [as far as I can tell...], when I add the target to the iSCSI software storage card it finds the logic unit number and everything seems good.

  the problem starts when I try to add as a data store... I select:

  Disk/LUN > freeNas LUN > leave default primary partition > give it a simple name > chose the minimum file size of 512 GB > finish

  and I get the following error...

  Call "HostDatastoreSystem.CreateVmfsDatastore" of object "ha-datastoresystem" on ESXi '192.168.2.202' failed.

  Operation failed, the diagnostic report: unable to create the file system, please see VMkernel connect you for more details.

  I am unshore where this newspaper VMkernal but that's what I'm going to start hunting for the next...

  in which case it may be useful, I am attaching screenshots of all my configs...

  Here, any help would be great!

  Thank you

  Hi, you can follow this tutorial video and see if you have missed at all stages: http://www.youtube.com/watch?v=Dc20IT1msAk

• I have problems with the mail (El Capitan)

  I have problems with the mail

  See writing an effective communities of Apple support question.

  Without knowing what are these problems there is no way we can really help you.

  Try this:

  Start the computer in Safe Mode, and then restart normally. It will be slower than a normal startup.

  MacIntel: Reset of the controller (SMC) system management

  Reset the PRAM and NVRAM on your Mac.

  Repair the hard drive and permissions - El Capitan

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until the menu screen appears.

  Repair

  When the recovery menu appears, select disk utility and press the continue button. Disk utility charges and select Macintosh HD entry indented from the list on the left.  Click the first aid tab in the toolbar... If disk utility reports any errors that have been corrected, then re-run first aid until no errors are reported. Wait until the operation is complete, then quit disk utility and return to the main menu. Select restart from the Apple menu.

  Now, download and reinstall OS X El Capitan 10.11.3 Combo Update.

• I have problems with the installer of Windows and Windows Update, and the solutions that I found for the two each rely on the other broken system to fix the first.

  I use a laptop HP Pavilion dv4-1220us with Windows Vista Home Premium Service Pack 1, a 64-bit operating system, and I have problems with Windows Update and Windows Installer. When I try to install programs, I get the following, or substantially similar message without the error code:

  "Error 1719. The Windows Installer Service could not be accessed. This can occur if Windows Installer is not installed properly. Contact your support team. »

  So I tried to download Windows Installer 4.5 and install it. When I try to start the installation, it always hangs on the first step, "Initializing Installation."

  After searching for a solution to this problem, I found that Windows Update may have a solution. So I downloaded the 64 bit version and got a file named 'file Windows6. 0-KB942288-v2 - x 64. I tried to run this file. He opened a box that said, in order "Prepare for Installation", "Full Preparation", and finally "Searching for Updates ', before you open a second box, which reads" click OK to install the following Windows software update: fix for Windows (KB942288). I clicked on OK in this box, which opened another box, which says at the top "updates are installed" and in a smaller section, "initializing for Installation................... »

  However, no matter how long it works, it never gets past "Setup initialization."... »

  So I tried to run Windows Update in Control Panel. He ran for a while, before giving a message saying "to check the updates, you must first install an update for Windows Update." I clicked on the button that says "install now". He has flashed, a moment, "download and installation of updates' before you go to the"check for Updates"and then he brought back the exact same upward ' to check updates, you must first install an update for Windows Update" message as before. I clicked install now once again, only to go into the exact same loop. After about four times in a loop, I gave up on it.

  So I tried to install Windows Installer 3.1v2, which took a while before saying "not enough memory is available to process this command." and the abandonment of the installation.

  So, I tried to download a program from 'Mr. Fix - it' of Microsoft. It downloaded fine and then failed on installation, because of the same Setup error I received initially.

  Finally, I tried to restart my computer and each solution is represented. Then I clean my computer and each solution is represented.

  In conclusion, the mistakes that I have in Windows Update and Windows Installer cordoned off each other, as the mistakes of each program are based on the other program to be repaired. I'm at my wit's end here. My computer works fine without one, except that I can't install new programs. I can access the internet fine, access files fine, all my scans have developed own... I don't really know what is happening. Can someone help me with this?

  Try the sfc scan:
  http://support.Microsoft.com/kb/936212

  If not, repair of Vista:
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• Port: 25, secure (SSL): no, Server error: 530, error number: 0x800CCC78. How can I fix it? TWC tells me its a problem with Outlook.

  I receive the following message if poster when you send an email from Outlook Express 6 'the message couldn't. not sent because the server rejected the sender's e-mail address ' Server: ' smtp - server.twcny.rr.com', Protocol: SMTP, server response: ' 530 authentication is required before sending [R0107005] ', Port: 25, secure (SSL): no, Server error: 530, error number: 0x800CCC78.  How can I fix it? TWC tells me its a problem with Outlook.

  Technical issues do not belong in the forum Feedback response so I moved your post to the WIndows XP "Netwoking and online" Outlook Express forum where questions are handled.

  Outlook and Outlook Express are completely different products and are not related except for the names.

  The problem you describe product generally when you have not defined thte option to authenticate your outgoing SMTP server.  If you click on tools > accounts, select your account, then click Properties, you should see a Servers tab.  This tab is a check box labeled "my server requires authentication".  Check it out.  Then check the settings button to the right.  You'll see two radio buttons.  From the top, labeled 'Use same settings as my mail server outgoing' is generally the right to choose.

• Unable to defragment the hard drive get a message that says: incosistancies in the file system

  Original title: cannot defragment the hard drive

  I have windows xp. All dates are updated. Whenever I try to defragmant my c drive I get a message that says: incosistancies in the file system and told me to run chkdsk and scan disk and try to defragment again but I keep getting same message. How can I fix it?

  Hi cliffordsevec,

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Relocation of defragmentation

  (a) in the disk, find the directory c:\Windows\Inf. If the system directory is not on the c: drive or not named Windows, find by clicking on "Start", then "run" and type %Windir%\Inf in the area.

  (b) find the file called dfrg.inf.

  (c) right click on the file and select "install".

  Step 2: Repair defrag

  un) Click on "Start", then "run", run this command: regsvr32 dfrgsnap.dll.

  (b) click "Start", then "run" and execute this command: regsvr32 dfrgui.dll.

  (c) run Defrag.

  Method 2: Follow the steps in the article.

  Disk Defragmenter does not work on a Windows XP-based computer

  http://support.Microsoft.com/kb/922379

  Method 3: Follow the steps in the article to check the drive for errors.

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

• Check the file system on C or registry cannont load the hive!

  Ok... I have a Dell Vostro 1510... all of a sudden, I can't on this laptop!  I have Windows XP Professional.  It lights up when I choose to start windows... I am said to be:

  Checking file system on c:

  The type of the file system is NTFS.

  Volume label is System.

  Then, when it starts to run it says: CHKDSK checks the files (step 1 of 3)... it happens to 47% finished and that's all!  It won't do anything else, it just stops!

  If I have to cancel the verification file system I get this message:

  STOP: c0000218 {Registry file failure}

  The registry cannot load the hive (file):

  \SystemRoot\System32\Config\System

  or its log or alternation.

  It is damaged, missing, or not accessible in writing.

  I do not have the disks provided with the laptop or I will say that I can not find them... I read a lot of these forums but none I saw helps me!  Because I can not enter and try to run anything!

  Thanks for any help in advance!

  I see you mentioned do not have all the disks with the laptop and maybe it's that he came not with any, because the installation files are likely in a hidden partition.

  but try to borrow a winxp cd and boot with it.

  then in the window settings pitch repair to start the recovery console.

  then at the prompt of disk, run the following >:

   

  Chkdsk /r

  Chkdsk /f

   

  then exit, remove the cd and restart the computer.

   

  the above commands are redundant, but nothing wrong with double controls.

   

  In addition, if you receive a following error on boot sector, then run via the recovery console fixmbr.

   

   

  
  --
  DB·´¯'·.. ¸ ><)))º> --> sent via windows live mail

  .

  DB·´¯'·.. ¸ >-))) º > ·´¯'·.. ¸ >-))) º > share nirvana mann

• verification of the file system and the disk check

  I always thought I knew.
  But I'll have more in addition to the doubts and uncertainties.

  When is to perform the verification of the file system?
  When is to perform the disk check?

  t-4-2

  Hello

  SFC/scannow - run when you suspect that there may be a file system corruption as it will check the digital
  Signatures. Of course, SFC will attempt to overwrite any file that is not signed correctly. For many errors
  It should be considered a first step in the effort to repair.

  How to repair the operating system and how to restore the configuration of the operating system to a previous version
  point in time in Windows Vista
  http://support.Microsoft.com/kb/936212

  How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows
  Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  System File Checker
  http://msdn.Microsoft.com/en-us/library/aa382541 (vs.85) .aspx

  System File Checker
  http://en.Wikipedia.org/wiki/System_File_Checker

  ==================================================

  CheckDisk (chkdsk) should be run every time you think that hard drive corruption as possible which could be
  1 file on the disc as it verifies the logical integrity of the disc. My preference is to run it also
  SFC is executed at any time, especially if there was any found errors.

  This explains how Vista and Windows 7 checkdisk (chkdsk)

  An explanation of CHKDSK and the new /C and /I switches
  http://support.Microsoft.com/kb/187941

  Chkdsk
  http://en.Wikipedia.org/wiki/chkdsk

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.