I ran Hot Fix. Now most of my options in the Panel disappeared

Similar Questions

• Crop tool now displays a diagonal line.  The Panel "shall apply when importing" disappeared!  Any help is appreciated!

  My crop tool now shows a diagonal instead of a "rule of thirds".  I don't know why or how fix it.

  Secondly, the part "Apply when importing" disappeared from the right panel.   Therefore, I am unable to use the custom during the import.  I don't really know if it occurred during the upgrade to LR5.4 or not.

  Any help is greatly appreciated!

  Probably, you pressed the O key which runs through overlays of harvest when the crop tool is active.

  Click on Tools / Guide of cultures overlay in expand to see the different choices.

• Ran repair and now recovery cannot find the OS to fix it.

  Damaged operating system.  Ran repair and now recovery cannot find the OS to fix it.  When I try the installation option, I get an error message that it can't find install.wim.  Operating system has been installed on a HP Pavilion a6600f and I have the product key, just not Vista 64 bit to enable more.

  * original title - corrupt OS. Ran repair and now recovery cannot find the OS to fix it. When I try the option to install I get an error message that it cannot locate install.wim*

  Hi agc409,

  Please see the following HP Web site:

  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=en&cc=IE&DocName=c00881405

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Must the updates and hot fixs remain on the hard drive after having been loaded? Is the information provided in the operating system?

  Must the updates and hot fixs remain on the hard drive after having been loaded?  Is the information provided in the operating system? Or do the lonely stand.

  Original title: need for disk space

  Here are the official specifications of Toshiba for your PC...

  http://support.Toshiba.com/support/staticContentDetail?ContentId=638405&isFromTOCLink=false

  All interface PATA (IDE) connectors are a standard 40 pin.

  I know that there is no restriction on the mixture of ATA drives with different speed capabilities and no restrictions on what cable you use, whether 40 wire or 80 strand (but still 40 pins).

  Faster drives will only work at the speed of the slowest car on any cable and 80 strand cables are needed to make ATA66 or higher drives run at their native speed.

  In addition, no player can work faster than the motherboard chipset permits, in your case ATA66.

  My provider of trade has still some disks 3.5 '' PATA in stock, but these are becoming harder and harder to find. Indeed, it is possible that production has ceased and that suppliers are just exhausted stocks.

  I can certainly say that, when repairs this technology were more frequent, I never had problems with discs theoretically faster on the same cable as slower drives, nor by using faster on 40 cable strands discs. In fact, of many penny pinching manufacturers (some of them major) regularly used for the optical drive and hard drive on the same cable as the motherboard has two connectors, resulting in a decrease in performance on the disk hard (although most of the people would not have noticed the difference). Sometimes, the cable would be 40 strand (understandable if you are penny pinching) and sometimes the cable would be 80 strand (laughable if you are penny pinching because they are [were] more expensive).

  Pass your question about vacant below the sound card. Unless your text confused me, this space is for expansion cards no disk drives. Space that you reference is probably to the back of the PC. Hard drives are normally located toward the front of the dedicated PC "berries". Unfortunately, I could find no photo on the Toshiba site, and still less those internal.

  Tricky

• VIsta Home Premium SP2 Hot Fix KB947821 - not install, up to 80% and then freeze it

  Hello

  I hope someone can help me?

  I ran Microsoft Fix it update after having problems with my PC Acer Aspire T671 - SB7Z and got a report a windows update error ref

  0 x 80070057 (+ date and time).  Found that this could be solved by installing KB947821 hot of difficulty.  I tried to install, happened at about 80% and then frozen.

  Struggling to figure out what to do next to resolve this problem.

  Welcome the thoughts and ideas.

  R

  Microsoft recommends an update to 947821, try to download the

  Update on your desktop, then open it. Here is the link...

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

• MX7 Hot Fix?

  I have installed MX7.02 and see that there are some updates.

  If I download the file form will of ColdFusion MX 7.02 Cumulative Hot Fix 3 who catch me up-to-date on all patches?

  http://kb2.Adobe.com/CPS/402/kb402465.html

  Sorry, but this is not necessarily true (I refer to the answer, 'true', the question of csgaraglino, ' if I download the file from ColdFusion MX 7.02 Update Rollup 3, will that catch me up-to-date on all patches? ")

  No offense means for Adam, that I realize that it is easy to assume that the answer is 'true', but there is more to this question than meets the eye. Given their name, 'rollup', it is reasonable to assume that the last one has always includes all fixes from the previous.

  But in fact, sometimes the ones you want to 'jump' may have had some manual steps (additional files in the downloaded zip file that must be treated, or individual additional patches listed at the top or bottom of the TechNote for the CHF). There are examples of such manual steps in a more in CF 9.0.1, CF 7.0.2 and CF 8.0.1 CHFs.

  I had intended to write a blog entry extended to respond to this question/problem/source of confusion, and this question made me today to go ahead and post:

  http://www.carehart.org/blog/client/index.cfm/2010/12/12/cfmyths_cumulative_hotfixes

  So csgaraglino, are you referring to jump from the 7.0.2 CHF 2 to CHF 3? In this case, then of course, also a long time you did the manual comes in 7.0.2 CHF 2, you can just ask 3 CHF (but don't forget to note that it also has its own additional manual steps.) But if you're ignorant of 7.0.2 basis of CHF 3, then you need to apply the manual of CHF 1 and CHF 2 procedure - and as I explain in my blog entry, there is a SIGNIFICANCE VITALE manual fix listed in 7.0.2 CHF 2 you almost everyone should apply, to avoid a common source of leaks memory (real).

  To conclude, this concern to 'jump' previous CHFs is in fact a problem with almost every version of CF (and most CHFs). Again, see the developed ticket for more details (much more).

  /Charlie arehart

  [email protected]

  Providing CF and CFBuilder troubleshooting services

  at http://www.carehart.org/consulting

• I could not update or install applications for weeks, so I disconnected my Apple ID and rebooted the phone but now I can't reconnect! The error is: unable to connect to the iTunes Store. I should w8 for ios10 and hope that it will be fixed by the new ios?

  I could not update or install applications for weeks, so I disconnected my Apple ID and rebooted the phone but now I can't reconnect! The error is: unable to connect to the iTunes Store. I should w8 for ios10 and hope that it will be fixed by the new ios? Cause don't want to reset my phone.

  You have tried: If you can not connect to the iTunes Store - Apple Support ?

  And I tried to do a soft-reset/reboot the phone?

• affter Update 9.3.2 whatsapp blocked please fix now

  affter Update 9.3.2 whatsapp blocked please fix now

  Re-install the App: If the application crashes when you start it, you'd better take it off and re - download from the App Store.

  • Update verification applications: Open App Store on your iPhone or iPad > click on updates > check if the application needs to update.
  • Restart your iPhone or iPad: press and hold the sleep/wake button to it turn off and then turn it on again.
  • Close the application: multitasking opened by double pressing the Home button > slide apps from non-response up to close.

• Up to version 6.22 of entry and other components HTML texts have been with a width. Now, after installing version 7. The entries have increased in size not more about before defined sizes... You can fix this?

  Up to version 6.22 of entry and other components HTML texts have been with a width. Now, after installing version 7. The entries have increased in size not more about before defined sizes... You can fix this?

  I think it's about the size, just differently than before. See the discussion in:
  https://Bugzilla.Mozilla.org/show_bug.cgi?id=691157

• I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. Hard restarting does not help, neither do not connect the camera to MacBookPro. Any ideas?

  I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. I left plugged in all night and still no change. Hard restarting does not help, neither do not connect the unit to aMacBookPro. When I do this, iTunes complains that it can not connect because the iPad 'expires '. Now it is disconnected, but I can't turn it off. Even close the lid will not extinguish it. Any ideas?

  Try the following. It seems yo may have to let the battery drain is completely:

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

• How can I fix a black and white screen on the air from my iPad? I rebooted it and ran the last updated IOS 9.2 on it. It is stuck and won't return to the color. All other functions work except this.

  How can I fix a black and white screen on the air from my iPad? I rebooted it and ran the last updated IOS 9.2 on it. It is stuck and won't return to the color. All other functions work except this.

  Have you checked the settings > General > accessibility > greyscale > power off.

  If this does not work ty settings > General > accessibility > zoom > on. Triple, tap the screen with three fingers. Tap choose filter. Click None. Triple, tap the screen to get rid of the menu zoom. If you have enabled greyscale in zoom you can disable it in zoom.

• Just ran updates and now the 425 in ftp error

  I just ran the last batch of security updates, and now I get this behavior in the ftp command line:

  C:\Users\twarfield>FTP ftp.mysite.com
  Connected to ifrance.com.
  ProFTPD 220 1.3.2e Server (ProFTPD) [192.168.1.1]
  User (mysite.com:(none)): twarfield)
  331 password required for twarfield
  Password: blabla
  230 the connected user twarfield
  FTP > cd httpdocs
  250 command successful CWD
  FTP > cd images
  250 command successful CWD
  FTP > cd stories
  250 command successful CWD
  FTP > cd newsletter
  250 command successful CWD
  FTP > dir
  200 PORT command successful
  [... very long pause...]
  425 can't build data connection: connection timed out

  Same thing when you use the quote pasv.

  Anyone know what security update caused this, so I can get out?

  THX

  OK, my apologies, it wasn't the cause Windows security updates.  It was a firewall (of course, this kind of thing isn't always a firewall), introduced when I installed a VPN (Checkpoint R70) client.

  Kind regards

  -TW

• Microsoft C++ runtime error. When I am downloading World Of Warcraft. Resources Windows Protection found corrupt files but was not able to fix some. Details are provided in the CBS.log newspaper. (I ran sfc/scannow in the command window twice)

  I am trying to download the demo version of 'WoW' World of Warcraft. I get to the part where he is configing its parameters to my computer and get a runtime error that something caused my program is complete. I read the other posts which had similar problems so I ran sfc/scannow in the command prompt window. It reads...  Resources Windows Protection found corrupt files but was not able to fix some. Details are provided in the CBS.log newspaper. I've shortened, but it is easy to understand that there is a question that the scan will not fix. I tried to access the CBS.log newspaper and opened a text doc, that was a bunch of YYYYYYYYY. I'm a little lost here and my 10 free WoW trial days is weathering away without me =)

  Please help, thanks
  

  Borrow a Microsoft Vista DVD(not Dell, HP, etc Recovery DVDs) to do a repair installation

  If you see a startup Neosmart repair disk download here, this is NOT what you want.

  You want a good Vista DVD that contains the operating system files.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If you need a recovery media for your laptop back to factory settings, read this info:

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon. Mick Murphy - Microsoft partner

• Difficulty getting the updates of Windows in April, fixed - now in trouble again with the month of may

  I, like so many others, have problems with updates of Windows, as well as to download and install. My problems on my computer Windows 7 began in April 2016 during the "patch Tuesday". After having done everything I could think of, including communicate with Microsoft (which were absolutely no help!), I found a fix here - installation KB3145739. Since then, I was able to check the updates without problem - that is to say, until the most recent "patch Tuesday," which was this week may 10.

  I had set my computer to "check for updates, but let me decide whether to download and install." Well, the computer doesn't seem to be looking up everything on Tuesday at all, so I checked manually for them, and as last month, the search seems to never end. After looking at some of the posts here, want to ask questions on exactly what to do. First, should I reinstall KB3145739? Also should I install or the other of the following - KB3153199 or KB3138612 - in addition to KB3145739 (fell on these two elsewhere on here as possible fixes)? Finally, should I change my settings to "never check updates" rather than as I have currently and always just manually check updates? Thanks for any help on this. I am so tired of MS causing problems with getting the updates (never had any problems until they start us pushing the 10).

  (Just thought of another question - GWX control panel installation would be a good idea?)

  Your most reliable way to identify the update is to check this page:

  http://Wu.krelay.de/en/

  Other than that, start with Kernel Mode driver updates. ;)

  Best regards, VZ

• We use Adobe Acrobat 10. When I try to download the most recent update, I get the message error 1608 download failed. How can I fix it.

  We use Adobe Acrobat 10. When I try to download the most recent update, I get the message error 1608 download failed. How can I fix it?

  Uninstall acrobat, clean (if windows os), Download Adobe Reader and Acrobat cleaning - Adobe Labs tool , and then reinstall.