I read the help forums and I've tried everything, and yet Firefox is still slow can I do?
I had problems with Firefox for about a week and no matter what I do nothing help to repair. I tried to reset firefox and it did not help, I went on several articles and nothing helps. I tried to disable plugins troubleshotting and even things in my computer and it does not help. I'm pretty stuck I can not go on a site without it being slow and to have it load slowly, it takes 20 minutes to load at halfway and that's the truth, I can't understand wat to do I have tried literally everything.
Help, please!
Hello
Sorry to hear that you are facing problems with Firefox, loading pages on Firefox. To help solve this problem, this information will be very useful
- You see the pages loading slowly also on other browsers (IE or Google Chrome or Opera)?
- You see this on the latest version too. I see that you are running on Firefox 25.0. Can you try updating Firefox 25.01 to see if that helps. 25.01 Firefox Release Notes mention a problem where loads pages until the mouse cursor is moved
- All sites that you visit have this problem, or only some of them?
If you can help us with this information, it will be useful to the narrowing of the question.
Thank you
Tags: Firefox
Similar Questions
-
Whenever I try to launch my 6 Lightroom, it says there "has encountered an error in its cache of the preview reading and needs to stop smoking". How can I fix?
Hi aubreyfrances,
Seems that your preview cache has become corrupted.
You must go to the same place where your catalog is stored and get rid of Previews.lrdata (not .lrcat) file
Then, launch Lightroom and check.
-
CD player does not read the CD ROM and CD music, DVD works fine
My HL-DT-ST DVDRAM GSA-H42N DVD and CD player does not read the CD ROM and CD music, DVD works fine
Hi Anil,
We recommend that you download and run the Microsoft Fix and check if the problem persists.
See your CD drive or DVD drive is missing or is not recognized by Windows or other programsSee also: http://support.microsoft.com/kb/321641
Visit our Microsoft answers feedback Forum and let us know what you think.
-
I've expanded the acrobat reader to read the small print and can / t get it back to normal can someone help me?
Hello
Developed by you mean you tried to read full screen mode?
Or which refers to something else?
Please relaunch the software and see if it works fine now.
What OS are you?
Concerning
Sukrit diallo
-
Lightroom has encountered an error when reading the preview cache and needs to stop smoking. Help, please
Hi crystalc,
It seems that the preview cache has become corrupted.
You must go to the location where your catalog is stored via finder/File Explorer and get rid of the file ending with Previews.lrdata (not .lrcat)
Default location of the catalog is under Pictures\Lightroom
-
Trying to open 5 Lightroom, a message appears 'Lightroom has encountered an error when reading the preview cache and needs to quit' "Lightroom will attempt to solve this problem, the next time he throws" when OK key Lightroom quit unexpectedly and the computer returns to the office. This persisted for 2 days and it has not set itself. help please.
Click OK close Lightroom.
You must manually go to the location of your Lightroom by Finder catalogue / file Explorer and get rid of the Previews.lrdata folder
By default, the location would be in Pictures\Lightroom folder
-
I get a message saying Lightroom met an erorr when reading the preview cache and need to stop smoking. Then told that Lightroom will try to solve the problem the next time it starts. Never tried to uninstall and reinstall but no good.
Sound familiar to anyone?
Hello
Please go to the save location of the Lightroom Catalog and here please delete the Lightroom Catalog Previews.lrdata folder.
Now please open Lightroom and check if it works.
Please let us know if it helps.
Kind regards
Tanuj Sandal
-
Have a problem with Lightroom 5.4. Given that the program crashed yesterday, will not start, it comes up with the message "Lightroom has encountered an error when reading the preview cache and need to quit." "Lightroom will attempt to solve this problem, the next time he throws." Except that it isn't, I get the same message and the program closes. Anyone know what I can do to fix it? Can not backup, can't do anything.
There are dozens of discussions in this forum that describe the fix
-
Error: "LR has encountered an error when reading the preview cache and need to quit."
Trying to open it, a message "LR has encountered an error when reading the preview cache and needs to stop smoking. LR will attempt to fix the next time it starts. "apppears and it stops. Tried many launches and the same error appears. Help!
Post edited by: Brett N
OK, go to the Lightroom folder (in images by default) and delete the folder/file ending with the extension.lrdata. Previews have somehow become corrupt.
-
I install the game install the patch but it does not start, just flashing screen and that's it. has tried everything what is possible. D what can I do to read. ?
Wednesday, April 15, 2015, 17:56:29 + 0000, PhilipMallard wrote:
I bought a Windows 8.1 today and wish I hadn't! It's a pain to use (I had a Windows 7 previously). None of my games of Cossacks work on windows 8.1 either and I've tried them in compatibility mode. Is it possible to install Windows 7 on my new computer and replace the disastrous 8.1 version?
I would like to point out something that you may not realize: Windows 8
has two interfaces; the modern/Metro Interface (which may be all the)
you have looked at) and the traditional desktop Interface. You can use
one or both. This traditional desktop Interface is almost
identical to the interface of Windows 7. the biggest difference is that
There is no Orb start clicking to bring up the start menu.But note that you can get the ORB start by using one of the many
third-party programs, are free or very cheap (the classic interface
http://classicshell.sourceforge.NET/ and debut8 to
http://www.stardock.com/products/start8/; my personal preference is
Debut8, but they are both very good). And goes from an interface to
the other is very easy; There are several ways, but simply by pressing
the Windows key is perhaps the easiest.Just install one of these two and using the traditional desktop computer
interface may be a better choice for you than going to Windows 7.
I use Windows 8, almost exclusively with traditional workstations
the interface and with 8 Start installed. If you were to look at and use
my computer, you may have a hard time realizing that it is not
Windows 7.
I also recommend to read "how to make Windows 8 or 8.1 watch and.
Want Windows 7 "to http://www.howtogeek.com/elk/298/45121/4206
I can't address the issue with your games, except to say that
whenever you move to a new version of the operating system, some of
which is used to run on the former does not work on the new. And it's
much more likely with utilities and games with companies
applications. -
I have the latest downloadable version of the LR5. It crashed while it was perceived 1:1 uttered during an import. After a restart of the Win764(), it shows a message that LR has to leave because he cannot read the preview files and it will try to fix it the next time's lance. I get the same message to another and whenever he throws so I can't launch LR at all now.
I get the preview of a file has been corrupted somehow. Is it possible to fix this without having to build a new catalog?
Use Windows Explorer to open the folder containing your catalog. You will see a folder with the extension .lrdata. You must remove this folder, and then restart the Lightroom. Lightroom will generate a new folder of previews.
-
Lightroom has encountered an error when reading the preview cache and needs to stop smoking.
What can I do to make this work?
Restart Lightroom
-
I own CS 5 Design Premium. Read the FAQ, it seems, I am eligible to proceed to 6 CS but I can't find the upgrade to purchase and download. I can't upgrade to CC because $49 per month, it's too much for me - do not use this product for the job. The offer of $29 seems reasonable but $49 is too much. I don't need most of the programs included in the CC, but subscribing to only three of them will cost much more. Really don't know what to do here :-(
Buy CS6:
----------------------I believe that the offer of $29 is only for the first year, so you would end up paying $ 49 thereafter.
-
tried for three days trying to get this working and I've already tried some of the suggestions forum and it's just to try... so happy I don't have pais nothing yet. I get out the signed loop no matter what I try
While in have you really tried? It's the standard solution, and it works in all cases that I have heard (including mine). Just rename the file, and a new one is created on the next launch.
-
LR has encountered an error when reading the preview cache and needs to stop smoking.
I have the trial version of Lightroom 30 days. I was able to use it for a week, but the last weeks of 1,5 to 2, it was locked up and that gives this error message. How to solve the problem? And how to reset the free 30 day trial? I wish I had the time using the product before deciding on the annual contract.
"LR has encountered an error when reading the preview cache and needs to stop smoking. Lightroom will attempt to solve this problem, the next time it starts. »
Thank you.
Delete the cache of the overview of the Lightroom folder in your pictures folder if you used the default location. It has the extension .lrdata.
You cannot reset the trial period.
Maybe you are looking for
-
Touch tablet will close or open a mail
Hi all My touch pad does not stop (through the closing button or through settings-> info on the device). It keeps what gives an error-> "are too many cards open", while nothng is actually open to the main screen. Even when I get to the info of the de
-
Toshiba Satellite U500 overheating on Linux
Hello. I just installed Fedora 15 on a Toshiba U500 and I noticed that it is very hot - the cpu temperature gets quickly to 80 C + and past often more than 90 c (then just pulled the fan in a few seconds).I installed lm-sensors and sensors - detect r
-
type in the dialog box run msconfig, it does not open. A red X message appears who says he can't find it and says please check the spelling and try again.Of course I type msconfig. And there is no error code.Thank you in advance.J Brazil
-
Cyan does not; Yellow barely comes out when printing. Tried all three levels of cleaning of the printheads with no luck. Print report prints black (three shades of black & gray); Pink (six shades of pink); shows barely any yellow; no blue. Another p
-
What VPN Cisco IOS VPN and RADIUS client?
Hello community, My company are trying to set up the remote user VPN for all of our external collaborators to the help of our existing Cisco router and a RADIUS server in Active Directory. I did all the AAA config on the router and set up the RADIUS,