I received a 800F0922 error code when I try to install Windows Update.

Similar Questions

• 64 c the error code when you try to install windows update kb2505591

  Why do I 64 c error code when you try to install windows update kb2505591

  Hello

  The kb2505591 is for the download of Bing Bar 7.0.

  You can try the methods provided below to solve the problem and then try to download the update for Windows.

  Method 1:

  I suggest to reset the Windows Update components and check if that helps resolve the issue.

  http://support.Microsoft.com/kb/971058

   

  Method 2:

  Follow the instructions in the link below to rename software c:\windows\system32\catroot and distribution records and try to install the service pack.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  If the methods above do not help then try to download Big bar 7.0 maually starting from the link provided below and check if the problem persists.

  http://support.Microsoft.com/kb/2505591

• 800b0100 error code when you try to install Windows updates KB974145 and KB978251

  Greetings and salutations:

  Any help would be appreciated.

  I tried to install these 'important' updates several times with the same result - updates failed, error 800b0100 code. I downloaded and installed the KB974821 tool - tells me it installed - same problem. (I don't know if I'm supposed to do something else with KB974821 - I have to "run" or just "installed" it enough?) Instructions could certainly be clearer)

  I tried to download and install the updates manually - without success - I get various error messages, like "does not apply to your system" or "for a different hardware platform.

  I tried this with my firewall/antivirus close as well - using Trend Micro - and still no luck.

  Thoughts, comments, suggestions, help? Very much appreciated. Thank you.

  
  

  BTW, I'm running VHP 64 with Service Pack 2 installed. Nothing should be this complicated or frustrating.

  Additional information:

  In another forum, where I posted this inquiry (I was told is the right place to post it here) I was advised on how to get the results of the KB947821 tool that I ran.  (Why this information was not given instructions on how to use the tool is beyond me). Here are the results of the analysis, apparently:

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  Checking package Watchlist

  Watchlist checking
  (f) amd64_bthmtpenum.inf_31bf3856ad364e35_0.0.0.0_none_7ff053f99479855b CBS Watchlist component missing 0 x 80070002 Microsoft-Windows-WPD7IP-SKU-package ~ 31bf3856ad364e35 ~ amd64 ~ ~ 7.0.6002.18112.bthmtpenum presence of registry package failed, possibly an orphaned package on package watchlist
  (f) amd64_wpdfs.inf_31bf3856ad364e35_0.0.0.0_none_a5e566b2d3236f6d CBS Watchlist component missing 0 x 80070002 Microsoft-Windows-WPD7IP-SKU-package ~ 31bf3856ad364e35 ~ amd64 ~ ~ 7.0.6002.18112.wpdfs presence of registry package failed, possibly an orphaned package on package watchlist
  (f) amd64_wpdmtp.inf_31bf3856ad364e35_0.0.0.0_none_9f92d6d487384aad CBS Watchlist component missing 0 x 80070002 Microsoft-Windows-WPD7IP-SKU-package ~ 31bf3856ad364e35 ~ amd64 ~ ~ 7.0.6002.18112.wpdmtp presence of registry package failed, possibly an orphaned package on package watchlist
  (f) amd64_wpdmtphw.inf_31bf3856ad364e35_0.0.0.0_none_78371ba92ff2a242 CBS Watchlist component missing 0 x 80070002 Microsoft-Windows-WPD7IP-SKU-package ~ 31bf3856ad364e35 ~ amd64 ~ ~ 7.0.6002.18112.wpdmtphw presence of registry package failed, possibly an orphaned package on package watchlist

  Checking packages

  Control components store

  Summary:
  Seconds executed: 1695
  Found 4 errors
  CBS Watchlist component lack Total count: 4
  Customer experience report downloaded successfully.  Thank you for your participation.  For more information, see the Microsoft Customer Experience Improvement Program on the Microsoft web site.

  So apparently the errors were detected. What they mean and how to fix them? Thank you!

  Hello

  How to fix Windows Vista error 800b0100 update
  http://www.SimpleHelp.NET/2008/07/06/how-to-resolve-Windows-Vista-update-error-800b0100/

  Error Code 800b0100 in Windows Update
  http://www.instantvista.com/800B0100.html

  Error message when you try to use Microsoft Update or Windows Update Web sites to install
  updates: "0x800B0100.
  http://support.Microsoft.com/kb/956702
  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------

  If necessary, you can get free reports of incidents.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Get 643 and 646 error codes when you try to install Windows Update. Everything else works with updateing, Itunes and other updates, but not Microsoft. I did what is listed here as much as I can understand, but still have the problem.

  Every time my computer upgrades, they fail to install.  I tried the fixes on the web site and still have the problem.  Errors are 643 and 646.  I continue to download and and keep not install correctly

  Hello sugarlake,

  Thank you for using the Microsoft answers Forums.

  Solution for error 646:

  Disable all Firewalls and try to install the updates and the stand-alone installation (download manually).

  Reset the Windows Update components

  http://support.Microsoft.com/kb/971058

  Restart the computer after the update is installed.

  Also check with

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/6e716883-7af4-4A9F-8665-2f4dd57eee8d

  http://support.Microsoft.com/kb/822798

  That should solve the problem.
  _________________________________________________________________

  Solution for 643:

  It is a common problem with the updates of the .NET Framework.

  http://support.Microsoft.com/kb/923100
  http://support.Microsoft.com/default.aspx/KB/976982

  http://www.networknet.nl/apps/WP/archives/324

  Follow the steps in the web links above to solve the problem.
   
  That should do the trick for you.

  Thank you.

  Kind regards

  Augustine.

  UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO. C

• get 80071AA7 error code when you try to install windows vista sp1

  get 80071AA7 error code when you try to install windows vista sp1

  80071AA7 ERROR_FILE_IDENTITY_NOT_PERSISTENT
  The file could not be opened from a transactional point of view, because its identity depends on the result of a unresolved transaction.

  (1) If you have the Vista installation DVD making an 'upgrade on the spot"(aka repair facility)
  How to perform a repair for Vista Installation

  All personal data will be kept. All updates applied previously will need to be reinstalled.

  (2) do a clean reinstall of Vista. All the personal data will NOT be preserved.

  3) click this link to launch a request for assistance from Microsoft by Chat or email: Windows Vista Service Pack 1

• I'm Zenith one 733F error Code when I try to install Windows Vista update to SQL Server 2005 (Service Pack 2 KB970895).

  I'm Zenith one 733F error Code when I try to install the latest Windows Vista Update, which is an update to SQL Server 2005 (Service Pack 2 KB970895).  This update has failed several times now.

  I followed the advice given in a separate post in this forum at Ramer49 to perform a selective startup with msconfig to try to run the update with all Microsoft Services disabled.  This does not solve the problem.

  I spent reviewing the logfile under C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\SQL9_Hotfix_KB970895_sqlrun_sql.msp.log.  The problem highlighted is that the Services of Services SQL2005 database program did not start.  Here is an excerpt from the log file...

  Product Installation status
  Product: SQL Server Database Services 2005 (MSSMLBIZ)
  (Previous) product version: 3077
  Version of the product (Final):
  Status: failed
  Log file: C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\SQL9_Hotfix_KB970895_sqlrun_sql.msp.log
  SQL Express features:
  Error number: 29503
  Error description: error MSP: 29503 The SQL Server service could not start. For more information, see the

  I tried to run the problem file (SQL Server MSSMLBIZ) directly by using the Windows administrative tool, but the file does not seem to start successfully.  Event Viewer log contains an error with event ID = 823.

  I don't know what to do next.

  Can someone help me?

  Thank you.

  Take a look at this link as it covers a way to fix this problem. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• 00643 error code when you try to install important update __WHy?

  Several times the same error code - tried this only started recently - what am I doing wrong? Can someone help me please

  Operating system? Update in question?

  1 Windows Update error 80070643
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80070643

  2. Windows Update error 80070643
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070643

  3. you receive error code 80070643 0 x or 0 x 643, code error when you use the Windows Update or Microsoft Update Web sites to install updates
  http://support.Microsoft.com/kb/958052

  4. you receive an "Error 80070643" error message when you try to update Office 2003 by using Software Update Services
  http://support.Microsoft.com/kb/903772

  and finally -.

  5. When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
  http://support.Microsoft.com/kb/923100

  and/or

  When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
  http://support.Microsoft.com/kb/976982

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• 80073701 error code when you try to install KB2378111 update on Windows Vista

  When you try to install the update KB237811 on Vista 32-bit, I said it has installed successfully, but I have to restart my computer.  After the reboot, I get a message that the installation has NOT been successful.  I tried to install this update three times, and I still get the same error code: 80073701.

  See the section "How to get help" of http://support.microsoft.com/kb/2378111

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Or you can...

  Start a free Windows Update support incident email request:

  https://support.Microsoft.com/OAS/default.aspx?Gprid=6527

  Buying to meet problems installing Microsoft security updates also can visit the following page for assistance:https://consumersecuritysupport.microsoft.com/

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site:http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

• I get this error 8007006E Code when I try to install Windows updates

  Original title: 8007006E error Code

  I get this error when I try to install the updates that my computer is telling me to install. Error Code 8007006E please help.  I think this is the beginning of a domino effect more major problems.

  Hello

  Follow these methods and check if that helps:

  Method 1:

  I suggest to disable the antivirus and then try to install the updates and check. Also, make sure that you enable the antivirus once the problem is resolved.

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to temporarily disable

   

  Method 2:

  You can try to reset the Windows Update components and then try to install the updates and check what is happening.

  How to reset the Windows Update components?

  http://support.Microsoft.com/default.aspx/KB/971058 

  Method 3:

  See also section provide below and check if it helps:

  Problems with installing updates

   http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Hope that information was useful

• _80070652 error code when I try n download windows updates.

  Hi I get error code _80070652 when I try to download windows updates.

  Hi rafmiah,

  Follow the troubleshooting steps in this thread to solve the error 80070652.

  Let us know if that helps.

• 8024A 000 error code when you try to run Windows Update on Vista 32-bit

  I get the above error when you try to run Windows Update on Vista 32 bit.

  I use an Asus laptop and have used the Asus recovery cd.
  I just replaced the old HD (500 gb) as it failed with a 750 GB HD.
  I tried the SP1 upgrade to SP2 and this causes a "catastrophic failure".
  Any help would be greatly appreciated.
  Thank you
  Sam

  Thanks for the support. I got the Asus machine this morning and they have corrected the problem in a few minutes by running a short script. In my view, that it is a common problem with Asus and Western Digital HD. Anyway congratulations to Asus. Here, after the service is impressive.

  See you soon
  Sam

• Why am I 80040155 error code when I try to install my updates?

  My Windows Update Manager tells me that there are updates ready to be installed, but when I try and install them, 14 all fail and I get the error code 80040155.

  I have been on other forums and tried or their advice to other users who had to go in: start; All programs; Accessories; Click with the right button on command prompt; Select run as administrator, then enter the code regsrv32 wmp.dll there is absolutely nothing the computer told me that no order existed.

  I also tried to download "Registry Mechanic", which did nothing and asked me to sign up for a full version before it would fix the problems - typical! : )

  Any help with this much appreciated that I'm certainly not an expert!

  Hi Klarabie,

  What version of Windows is installed on your computer?

  You can try to reset the Windows Update components, download the Microsoft fix - it from the link and run the wizard that automatically resets the windows update components, if it does not, I recommend that reset you manually update windows components from the link: http://support.microsoft.com/kb/971058

  If this is not enough, you can try to download updates from the link given below by using the Article as well as updates and try to install them manually and check if it works very well.

  http://www.Microsoft.com/downloads/en/default.aspx

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• 80070490 error code when you try to install windows vista sp2

  OK JUST LISTEN UP GUYS I REALLY REALLY NEED HELP!

  OK to start with I have a 32-bit with sp1 operating system.
  I need help, try to install windows vista sp2. I tried for ages now to make it work, but I quit so I hope you can help me.

  It comes up with error code 80070490 and it says get help with this error so I click it and it says I have to insert a windows dvd?
  I HAVE A DVD OF WINDOWS, SO IT WON'T WORK

  SOMEONE HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
  ITS REALLY ANNOYING
  

  Hello

  1. who is the antivirus installed on the computer program?

  2. What are the steps you tried to solve the problem?

   
   
   
  Download and install the update the system analysis tool
  80070490 error when you install Windows Vista SP2 or Windows Server 2008 SP2
  http://support.Microsoft.com/kb/976920
   

  Search for the error message in the event viewer.

  Event Viewer is a tool that displays detailed information about the events important (for example, programs that don't start as expected or updates are downloaded automatically) on your computer. The event viewer can be useful when troubleshooting problems and errors with Windows and other programs.

  For more information, see:

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  I hope this helps.

• Receiver 0x8007043C error code when you try to install Windows XP service pack 3.

  What should I do if I have has been updated to windows xp and I received this error? [Error number: 0x8007043C]

  I think I have some kind of a worm of Svchost. I tried Malwarebytes which came with nothing

  After a sakhi system. I have Norton anti virus. I did a system restore. I am running Windows in safe mode, try to update

  service pack 3 and service pack 2 installed.  Windows will not be updated in normal mode, as I tried in safe mode. I tried to manually update to service pack 3 internet explore and get this error. Windows will not be stopped, programs do not start, and when I open the Task Manager sometimes I see a Svchost process take a lot of memory and slow everything down.  I have internet explorer 8.

  Any help would be great. Thank you.

  Hello

  Start the computer in normal mode and follow the steps from the link: steps to take before you install Windows XP Service Pack 3: http://support.microsoft.com/kb/950717

  Also, you can follow the procedure from the link: how to troubleshoot an installation fails in Windows XP Service Pack 3: http://support.microsoft.com/kb/950718

• get the 490 error code when you try to install the update net framework

  0000490

  Hi harry_m,

  You are able to install some other updates of Windows on the computer?

  Please provide compete the error message you receive and also specify Windows Edition\Version you are running on the computer, for a better understanding of the issue.

  I suggest you try the following steps:

  Step 1: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Step 2: Run (Checksur.exe) system update readiness tool

  Follow the steps mentioned in the link (method 1) below, and then try again to install updates

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  http://support.Microsoft.com/kb/958044/

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.