I received a message after you have signed in: ST Services.exe - Entry Point not found.

The context of xmlxpathfree proceduce entry point not found in the dynamic link library Libxml2.dll.  After canceling the message, another message came: MSWindows - ST Service Scheduling has stopped working?  What that is this allusion and what can I do about it?

This program is associated with Dell Datasafe and possibly other Dell programs pre-installed on their computer. If you don't use a Dell Datasafe, you can try to uninstall it.

There is a some evidence that this problem is caused by some registry cleaners and cleaning utilities.

Tags: Windows

Similar Questions

  • -Pop-up message error when I start my computer: "TVAgent.exe - Entry Point not found".

    When I start my computer, the first message when I see my desktop is a pop up that says "TVAgent.exe - entry not found.» The procedure entry point not found PowerReadACValues in the dynamic library POWRPROF.dll. "I try to close it and it appears in the same as spot 10 times and then finally I can close it and it will not reappear. I tried a full sweep of the computer with Norton and it did not come with anything. All my programs and all seem to work fine right after, but I fear that there is something wrong. I am running Windows Vista.

    Hi Csiew42,

    Thank you for visiting Microsoft Answers.

    ·         Which version of Windows Vista is installed on your computer?
    ·         Remember to make changes to the computer recently?
    ·         Who is the manufacturer of your computer?

    I suggest to perform the clean boot and check if you get the error again. Clean boot will start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    The following link has steps showing how to perform the clean boot: http://support.microsoft.com/kb/929135

    (1) perform the clean boot (check the link to perform the clean boot).

    (2) enable half the services.

    (3) determine if the problem comes back.

    (4) enable half of the startup items.

    (5) determine if the problem comes back.

    (6) repeat the steps above until you discover which program or service is causing the problem.

    After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

    Note: Please make sure that the computer is configured to start as usual according to step 7 of the article: how to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7: http://support.microsoft.com/kb/929135

    Hope the helps of information. Please post back and we do know.

    Kind regards
    Joel S

  • Whenever I try to open a program, this message appears "Service.exe - Entry Point not found", it is on windows 2000 OS

    Whenever I try to open a program, this message appears twice "service.exe - point of entry not found" is on the Windows 2000 OS

    I hope this helps:

    http://support.Microsoft.com/default.aspx?scid=kb;en-us;324762

    If not, you may need to reinstall the OS Win 2 K / Service Pack

  • Wzcsldr2.exe - Entry Point not found the procedure entry point apsGetReady cound not found in the library wlanapi.dll dynamics. apears after startup

    ---------------------------
    Wzcsldr2.exe - Entry Point not found
    ---------------------------
    The procedure entry point apsGetReady could not be found in the library of links dynamic wlanapi.dll.
    ---------------------------
    Ok
    ---------------------------

    Because the Microsoft Answers forum does not ask for any type of information system when a new question is asked so we don't know anything about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

    Maybe someday the dialog box 'ask a question' forums XP will ask these questions automatically when a new thread is started so I don't have to ask every time.  It might even be possible to solve a problem in a single response when enough information is provided.

    Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

    Provide information on your system, the better you can:

    What is your system brand and model?

    What is your Version of XP and the Service Pack?

    Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

    The afflicted system has a working CD/DVD (internal or external) drive?

    You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

    Do you see that you think not you should see and when you see it?

    If the system works, what do you think might have changed since the last time it did not work properly?

    Googling a bit (very little) reveals that the file wzcsldr2.exe or wzcsldr3.exe belongs to a kind of device from D-link wireless connected to your system.

    Fact that sound familiar and you have something like this installed?

    If Yes, then I would get the page Support D-Link and find the latest driver for any device you use and install it.  You may need to first uninstall your device running - I'm sure they must have instructions and tips for the procedure.

    They also have an active Support Forum where you can post your problem/question to see if people there can help you get there.  There is already some discussion in the forums about the problems you describe, but since we know absolutely nothing about your system, you should probably take it yourself.

    I found a few other ideas through Googling, but I don't like some of the ideas I've read and if you stuff worked before, what do you think has changed since the last time it worked correctly?  Did you update or reinstall your device from D-Link or drivers, lately?

  • .exe error] is not found the procedure entry point AddAtomW Entry Point not found in dynamic bindings KERNEL32 library. DLL when I try to run any program. I have

    Original title: [ProgramName] .exe Entry Point not found

    I get this message: the point procedure entry AddAtomW could not be found in dynamic bindings KERNEL32 library. DLL when I try to run any program. I don't know what to do. Help please!

    Hello

    1. did you of recent changes on the computer?

    Method 1:
     
    It is possible that some third-party programs installed on the computer is causing the problem.
    I suggest that you put the computer in a clean boot state and check if it helps.
    To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
     
    See the link below to learn more about how to clean boot.
    How to configure Windows XP to start in a "clean boot" State
    http://support.Microsoft.com/kb/310353
     
    Reset the computer to start as usual
    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
    (a) click Start, type msconfig in the search box and press ENTER.
    (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.
    (c) under the general tab, click the Normal startup option, and then click OK.
    (d) when you are prompted to restart the computer, click on restart.

    Method 2:

    Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

    See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135

    Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  • Flash CS5 does not open after working for years? Entry point not found

    Hi guys,.

    I'm having a problem at the opening of my Flash CS5 after this works well since I installed it for always there. I don't know what could have caused this, and my other cs5 programs are open.

    Dreamweaver and Fireworks has not changed all (these 3; with Flash; are what I use the most)

    I also open photoshop and the legacy of my main collection for the test and they opened very well also. I made a scan using microsoft databases and found nothing.

    I tried to run as administrator on flash and he says the same thing.

    I am using windows 7 Ultimate N SP1 64-bit

    Here's the alert in the text.

    flash.exe -Entry Point Not Found
The procedure entry point ?ButtonChanged@UI_ClearButtonTextEdit@controls@dvaui@@UAEXP
AVUI_ButtonChangedMessage@23@@Z could not be located in the 
dynamic link library dvaui.dll

    Please let me know what is happening here.
    Thanks, I really appreciate the help.
    Randy

    It's so strange, I open it today and it opens fine. No problem.
    I think it was the old crash flash Wednesday, ha. I don't know what fixed it. Yesterday I had restarted but nothing has changed. Today, I had just disconnected and reconnected.
    Weird.

  • After you install a Foxfire 5.0 update, I get this message when you try to open Mozilla: the procedure entry point sqlite3_db_status could not be located in the dynamic link library mozsqlite3.dll.

    I get this message when you try to open Mozilla: the procedure entry point sqlite3_db_status could not be located in the dynamic link library mozsqlite3.dll.

    Do a clean reinstall.

    Download a new copy of Firefox and save the file to the desktop.

    • Uninstall your current version of Firefox.
    • Do not remove the data of a personal nature when you uninstall the current version.

    Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

    • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

    Your bookmarks and other profile data is stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

  • After you have installed windows 8 my cd rom is not working.

    After you have installed windows 8 my cd rom is not working. Why this is happening

    Most likely your drivers for the cd rom does not have go into Control Panel/System Device Manager and security for all marked devices other devices that may not have installed the drivers. Most likely, you will need to go to your manufacturers website and find the driver for your specific model, you should be able to download and install it from there.

  • You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. The network path was not found. »

    What does this message mean? I get when I click on the icon to evaluate files on another of our computers. "You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. The network path was not found. »

    The other computer has not been configured to allow remote access to this folder from your account.  You'll want to go to this other computer, right click on the folder that is shared and go to properties, then set the appropriate security settings to allow access.

  • At startup Vista, message of "SetPointUpdate - Entry Point not found".

    When Windows Vista is starting a box appears saying "SetPointUpdate - Entry Point not found".

    "The procedure entry point.

    ?? 0CFileName @ QAE@PAUHINSTANCE_@@PBD1@z couldn't be

    "Located in the dynamic link library KemUtil.dll.

    No idea what it is and how to fix?

    Thank you S

    * original title - SetPointUpdate.exe file *.

    When Windows Vista is starting a box appears saying "SetPointUpdate - Entry Point not found".

    "The procedure entry point.

    ?? 0CFileName @ QAE@PAUHINSTANCE_@@PBD1@z couldn't be

    "Located in the dynamic link library KemUtil.dll.

    No idea what it is and how to fix?

    Thank you S

    Ideas:

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Hé sjd991

    It would apear to be a logitech software

    read the information below

    http://www.Vistax64.com/Vista-General/49291-setpointupdate-exe.html

    http://www.bleepingcomputer.com/filedb/kemutil.dll-39750.html

    Walter, the time zone traveller

  • After you have reinstalled Windows XP, the video settings are not correct

    Original title: parameters viedo

    I had to reformat and reinstall XP.  Everything works except for things like graphics, cards and other games and some pictures.  They are very wide and short.   I guess it's something in the video settings defined in landscape mode, but I can't find where.   Can anyone help.

    Thank you

    Caz

    You probably just set your screen resolution to match your monitor.
    Right-click on an empty area of your desktop and select 'Properties', then click on the 'Settings' tab at the top.
    At the bottom left there is a box of "Screen Resolution."  Drag the marker to change the screen resolution to a setting that matches your monitor...  You determine this by the ratio of the width to the height.  Some common resolutions to the dimensions of the screen are the following:

    4:3 = 800 x 600, 1024 x 768, 1280 x 960, 1600 x 1200
    5:4 = 1200 x 1024
    8:5 = 1440 x 900, 1680 x 1050
    16:9 = 1280 x 720, 1776 x 1000, 1920 x 1080 (widescreen)

    After you change this setting and click on 'OK', the screen will become to this resolution.  It will give you a few seconds to confirm that the monitor can display this resolution. If you see the screen, click on 'OK '.  If your screen is empty, don't panic but just wait 30 seconds approximately and your screen will return.

    HTH,
    JW

  • After you have installed the Windows updates, my computer does not recognize that there is a disc in the DVD - ROM thing

    I had this problem for weeks and only recently someone told me that it is perhaps for this reason.
    I tried several things to fix, and one of those who created an error where when I clicked on drive E in Windows Explorer, it looks like:

    E:\ application not found

    So, in the end, I wiped my computer and everything on it and rebooted again.

    IT TOOK FOUR HOURS.

    So, I've set up the computer as I did when I got it 2 years ago, and everything was fine. I could insert a disc, it reads that and I was able to install my game, no problems.

    Now, I have reset everything up, and there are more than 2000 updates to update installed. So I did.

    SO NOW, after all this, which took another TWO HOURS - he does not all disks again.

    I play the Sims 3 - fiercely - and so I tried to re - install all my expansion packs, but it does not now.

    I DON'T want to make that whole process again and install all my games before updating Windows, because I believe, even if I did that, once I've updated, I can't play the game, because my laptop does not recognize that the game disc is there.

    Help, please.

    I spent so much money on these games, and I love them! I don't have the money to buy a new computer.

    I have a Lenovo Ideapad

    Core i5 Intel

    https://support.Microsoft.com/en-AU/KB/314060/en-us

    Your CD-ROM or DVD drive is not recognized by Windows or other programs

    Discussion here:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/Windows-8-DVD-RW-application-not-found/d68931e4-82f1-4D04-830d-49478ead5dd8

    Your AutoPlay doesn't work maybe not properly.

  • Adobe has created, password, and absorbent product serial number, Adobe Photoshop Elements 13, etc. After you enter the product key, the link says page not found

    Bought this 14 Photoshop Adobe elements and the first items 14, after changing the key to redemption to the serial number, it gives me the key for both. After entering the key, it gives me a link saying times have been downloaded, I click on the link and it says Page not found... What to do. ?

    Available downloadable Setup files:

    Download and installation help links Adobe

    Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  • Thunbird does not open after upgrade, I get entry point not found cubeb_get_min_latency could not be located in gkmedias.dll

    Thunderbird just failed after an update. It does not open. I get the following message:
    Not found entry point cubeb_get_min_latency could not be located in gkmedias.dll
    Any help with what I can do to manage this?
    Thank you very much
    Chris

    Download a complete Installer and reinstall. You can get it here:

  • I get this error Message After you have uninstalled the HP software

    Recently, I uninstalled the HP 8600 Officejet Pro software from my computer because I have another printer that I use more regularly and I needed to make room on my SSD.  I have used HP for uninstalling do.  The problem is every time that I reboot, the above error message appears.  It is not a major drawback or whatever it is, that's all just annoying, so I want him to stop.

    I am running Windows 7 Home Premium.

    The HP software that I always running is FWUpdateEDO2 HP, HP Officejet 4620 based Device Software, HP Officejet 4620 series help, HP Officejet 4620 series study improvement of product, HP Photo Creations (not sure if I need it, should I uninstall it?), HPSupport Solutions Framework and HP Update.

    Thank you!

    The uninstallation process has left no doubt a reference to "HPStatusBL.dll" (or similar) in one of the startup files/records or reg keys.

    Take a look in MSCONFIG [Startup] tab probably in the column 'programs' to see if you can find a reference to it there. If so, try unchecking it and restart. If this is not the case, download AutoRuns and take a look at that. A similar idea but a more powerful tool.

Maybe you are looking for