I received an update on your part 10/11/10 and now my laptop will not boot in place! I need HELP.

I received an update on your part 10/11/10 and now my laptop will not boot in place!  I need help.

Hi bobbymh,

-Do you happen to remember the update has been installed?

-You receive an error message when you try to start the computer?

Follow the steps below:

Method 1:

 

Try to start the computer using the last good known Configuration and check if you can successfully start.

 

For instructions, see How to start your computer by using last good Configuration known as Windows XP .

Method 2:

Perform the system restore from SafeMode to a restore point prior to the show and check if this solves the problem.

See to run the system in safe mode restore

See also How to restore Windows XP to a previous state

Method 3:

 

Follow the steps listed in the following article:

How to fix a computer that does not start

Gokul - Microsoft Support

[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

Tags: Windows

Similar Questions

  • My computer turns off during an update to windows xp and now windows xp will not load.

    My computer turns off during an update to windows xp and now windows xp will not load.  It gives me the option of last known good configuration and safe mode startup and normal startup, but it just goes back to the loading screen then flashes a blue error screen then back to display boot options.  I don't have a recovery disc as the laptop does not have a CD-ROM drive or a floppy drive.  I have the product key, but I don't know where or how repair the operating system.

    Contact the manufacturer of your laptop as there must be a way to restore the computer. There may be a hidden restore partition.

  • Windows Vista update (April 1, 2011) now the computer will not boot.

    1. Windows Vista update (April 1, 2011) now the computer will not boot.  Love updates been invited but now computer does not start. Just gets up to a certain point, and then restarts. Impossible to start safe mode! Don't know what to do, please help!

    Hi Ema1976,

    Do you have an error message when you try to start?

    Step 1: Disable the automatic restart of the menu advanced startup options and then enter the error message, see the link below:

    Advanced-Startup-options-including-safe-mode

    http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

    Step 2: Follow the steps mentioned in the link below to access system recoverytools and run the Startup Repair tool again.

    How to access the System Recovery Options menu?

    Run the tool to restart system as shown in the link below
    How to use Startup Repair?

     

  • I just installed the automatic update to Thunderbird 24.4.0 and now some accounts will not send or receive.

    I use Thunderbird for many years with several accounts of e-mail with little trouble. Yesterday, I received the notice that an 24.4.0 update was available and I did this update. Immediately after, I started having trouble with my email. All but one account could receive emails and when I tried to "Get Mail", the status bar at the bottom of the screen indicates "skewered to pop - server.woh.rr.com.... "and the green progress on the right bar is almost entirely green for at least 60 seconds, then goes with no new emails and no error message. When sending, the situation is similar, except that after a period of time, I get the error message "failed to send the message.
    The message could not be sent because the connection to the server of SMTP smtp - server.woh.rr.com expired. Try again or contact your network administrator. "It is for accounts that worked perfectly before the update and without configuration changes have been made. I also downloaded a file of installation stand alone for 24.4.0 and reinstalled without result. Obviously a bug in 24.4.0.

    I installed a lot of windows updates and now it seems fine. Do not understand, but it's all good now.

  • I recently downloaded an update for itunes and now my iphone will not fit on my pc

    I recently downloaded an upgrade to my pc and my iPhone. Now when I plug my phone into my pc, my phone will not show up and I'm unable to transfer playlists to my phone.

    Hello bigdaddyjohn,

    Thank you for using communities Support from Apple!

    I understand that after a recent update on your computer, your iPhone is no longer recognized in iTunes. To move forward and resolve this situation, I recommend reading over and working through the steps in the following article.

    If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

    See you soon!

  • Pavilion 15-ab118na: I just did an update and now my laptop does not recognize my PIN code

    I just did an update on my laptop and now when I try to connect it does not recognize my pin code. Don't know if it's Windows 10 32 or 64-bit.

    Hi @Allic43,

    Welcome to the HP Forum! Thank you for becoming a member of the HP Forum. It's a place dynamite to get help from the community, to get suggestions and find what has worked for others. Because you have the best experience, here is a link for you to see, if you have concerns: first time here? Learn how to publish and more

    I have the bar who after doing an update your PIN code is not accepted and you don't know if your Windows is 32 or 64 bit. When I checked the specification of your laptop, it came with 10 Windows 64-bit edition. You can use your Microsoft account to reset the password on your laptop. Here is a link to help you in this process. Computers HP - how to recover your forgotten password (Windows 10).

    Please let me know if that solves the problem by marking this post as 'Accept as Solution'. "To simply say thank you, click on the" ","inch Up ' below!   If you need more assistance let me know and I will gladly do everything I can to help.

  • I updated adobe and now windows vista will not come to the top!

    I was doing something that requires adobe 9 or higher, so I updated to 10. Now my main screen will not come to the top. I can't do all the suggestions for troubleshooting because I can't get to my computer at all.  I validated and it says windows Pascal more send activationsetc. and I can't update because I can't.

    Try to start in safe mode (press F8 immediately and repeatedly after Power Up Self Test and before Windows starts) and uninstall Adobe Reader X.  Then try to restart normally.

  • updated to ios 9.3 and now my phone will not receive calls?

    I have an iPhone from Verizon 6s.  I have updated to iOS 9.3 last night successfully.  Today, when someone tries to call me, my phone does not ring.  Happening in virtual machine after 4-5 rings.  My wife has the same phone and the same exact problem (it updated to iOS 9.3 as well).  Help, so I can receive calls.

    Have you checked to make sure that do not disturb is not activated in the settings? The volume is mounted? If you checked every setting and switch, try a forced reboot. No data will be affected.

    To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo.

  • Update Service Pack 2 is not installed, now my computer will not boot

    Hello. I recently tried to install the service pack 2 update on my computer. It did not installed. My computer is slow, so I tried restarting. It came with the screen that shows the updates are being installed. I kept the computer until it stops. When I turned it back on it would go to this same screen but with a message saying that the service pack was not installed correctly and that the computer is reverting changes. It will turn on / off power permanently. In an attempt to fix it, I managed to get in the log on screen and put in my password, but the minute I hit enter my computer started and closed the loop on endless. Anyone know what I can do?

    http://support.Microsoft.com/kb/949358/en-AU

    "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

    The above lists some options including restoration/repair of the etc system.

  • inDesign update and now the mouse will not drag/repositioning objects

    Just open inDesign for the first time after the most recent update (which I think that I've updated yesterday). Have found that I can not drag/reposition the objects with the MOUSE - Although everything can be moved with the arrow keys or by entering the values digital location. The key to the question here is 'move' (or 'slide', if you prefer). I can RESIZE with the mouse... but no repositioning bounding boxes. In fact, the functions normally accessible by or otherwise used by a mouse work - with the exception of drag.

    I uninstalled the app and reinstalled a couple of times, but no change. I'm using an iMac with OS 10.11.2

    Anyone?

    Hi rcminc,

    Please, try to restart the Mac in safe mode and check the performance of the application.

    Try safe mode if your Mac does not end commissioning - Apple Support

    If the application works in safe mode. Try to restart and check if it works in normal mode.

    Also if you have the third party extensions installed on any browser, try to remove them and restart and check if that helps.

    Thank you

    Nikhil Gupta

  • My last update failed 99% and now my laptop does not start?

    All I get on when startup is a blue screen with message saying briefly that I need stat in safe mode and sorting hardware and soft ware problem, more a stop message xxxstop:0x0000cif5 00000000___

    Can anyone help

    Thank you

    Gazsess

    Hello

    I suggest you to follow these steps and check if that helps:

    Method 1:

    Start the computer in safe mode and check if you can start:

    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    Method 2:

    Try to perform the verification and startup repair if it helps:

    http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

    It will be useful.

  • I update my Firefox latest version 32.0, and now I can not upload anythink, can you help me

    I think that last week, I update my Firefox latest version 32.0, and now I can not upload anythink, can you help me - in more detailed - when I try to download a file and save it to my pc it remains on 99%, write the time unknown and not donwload, that is even if I try to open and file - means 'open' clieck not records. I try with different brouzer and quote different and everythink work very well. Problem is only on firefox. I try and that "in the address bar, type about: config and press ENTER." The subject: config "This might void your warranty!" warning page may appear.
    Click on I'll be careful, I promise!, to continue to the about: config page. A list of parameters must appear
    Filter the list by typing in the search bar at top. Enter scanWhenDone. Now you should find the preference "browser.download.scanWhenDone".
    Double-click this preference to set the value to false. "
    But still a problem.

    It's the recent9 b 32.0 and it has been fixed and will be in the build 32.0 then, probably the RC1 build 32.0 if normally such a fix would be a beta version as 32.0b10. The release is Tuesday next so little time. Type of topic: config location bar (address) and you can try to change the empty value of browser.safebrowsing.appRepURL in the meantime. If an empty value does not work then put in https://sb-ssl.google.com/safebrowsing/clientreport/download?key=%GOOGLE_API_KEY%

    For not not reading the useful comments are bug / spam.
    Bug 1057764 - Download Manager regression in the update of FF32 beta 9

  • My wife tried to update firefox and since then it will not open. When I click it a window appears and says that I have to finish the upgrade a previous version by restarting. When I reboot nothing changes.

    My wife tried to update firefox and since then it will not open. When I click it a window appears and says that I have to finish the upgrade a previous version by restarting. When I reboot nothing changes.

    If the files have already been downloaded, then delete the files in the folder updates\0 and updates.

    You can also remove active - update.xml, or even updates.xml (stores the history of update).

    C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates
    (%LOCALAPPDATA%\Mozilla\Firefox\Mozilla Firefox)
    

    Do a cleaning (re) install and delete the folder of the program Firefox (C:\Program Files\Mozilla Firefox\).

    Download a new copy of Firefox and save the file to the desktop.

    Uninstall your current version of Firefox if possible.

    • Do NOT remove the data of a personal nature when you uninstall the current version or you lose your bookmarks and other data in the profile folder.

    Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

    • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

    Your bookmarks and other profile data stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

  • I've updated windows and now my computer does not connect to the wireless network.

    I've updated windows security updates and now my computer does not connect to the wireless network.  Until then, it worked very well and even now it will connect through wired connection but not wireless.

    Hello
     
    You can follow below link that can help you to solve your problem:
    How to troubleshoot wireless network connections in Windows XP Service Pack 2
  • My laptop will not work, he said of updates step 3 of 3, but it is at 0% and keeps restarting itself. How can I get rid of this to open a session?

    My laptop will not work, he said of updates step 3 of 3, but it is at 0% and keeps restarting itself. How can I get rid of this to open a session? I tried the safe mode and do a system restore, which get rid of it. And suggestions? Thank you.

    Hello

    1. have you made changes on the computer before this problem?

    2. do you get an error code?

    Follow the mentioned article:

    Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

    http://support.Microsoft.com/kb/949358

    Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process.

    WARNING: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    322756 (http://support.microsoft.com/kb/322756/)

    How to back up and restore the registry in Windows

    Hope the above information is helpful.

Maybe you are looking for