I received the error message: 0x0000ffff after running the system restore

Similar Questions

• Blue screen after running (xp) system restore

  I tried to launch the system restore on a compaq nc6220 Windows xp; now all I get is the BSOD with the following "* STOP: 0x0000007b (0xf79ae528, 0xc0000034, 0x00000000, 0x00000000)."  I don't have a recovery tools cd that works on this laptop (my office tells me that's not compatible when I try to start the laptop).  Any help will be greatly appreciated.  Thank you!  Mike S.

  
  

  Read this KB324103 and see if it helps.
  http://support.Microsoft.com/kb/324103/en-us

• How to change group policy for the system restore will create restore point

  I recently installed an SSD with windows 7, it's the default OS and hard drive on a system dual boot. I also have my old HHD with windows vista home premium. I had problems using the restore of the system with the SSD drive and read on a forum that the restoration of the system causes problems when it is used on an SSD. I have disable restoring the system to the SSD, but still he had checked to allow restoration on the vista disk and a 500 GB drive, I have use for storage.

  I managed to create a restore point when you are using windows 7 OS, but when I used my vista drive, and wanted to create additional restore points for two HHD disks, it does not allow the creation of restore points by group policy settings. I regularly create restore for the SSD disk and have created one for the HHD Vista since the system restore does not create additional restore points now.

  How can I change my group policy settings to enable restore points to create the disk under Vista. I don't remember changing anything that might have caused it, is there a chance that a horse of Trojan or virus caused this? I have Webroot antivirus and currently aired Kaspersky Anti-virus on Vista drive. I also ran the Microsoft safety scanner in safe mode and normal startup mode, none of the virus scanners have found problems, so I'm pretty sure I don't have a Trojan or a virus.

  To the point, how to make appropriate changes to allow the restoration of the system to work for my two HHD disks.  Better yet is there a way to restore completely all original windows default system settings without having to do a clean reinstall.

  You can provide any help would be greatly appreciated

  Thank you

  Skyraider 33

  Hello

  You receive an error message when creating a new system for Windows vista restore point?

  Using the Group Policy Editor

  If your edition of Windows Vista includes the Group Policy Editor (gpedit.msc) snap-in,

  Follow these steps:

  1. Click Start, type gpedit.msc and press ENTER
  2. go to the following branch: Computer Configuration | Administrative templates | System | System restore
  3. double click on disable the Configuration and set it to not configured.
  Note: If the above setting is already set to not configured, set it to "Enabled" and click on apply. Return back the setting to not configured, then click on apply, OK.
  4. exit the Group Policy Editor.

  If using the Group Policy Editor do not fix the problem, try the registry fix from the following.

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  Using the registry editor

  1. Click Start, type regedit.exe and press ENTER
  2. navigate to the following key:
  HKEY_LOCAL_MACHINE-Software-policies-Microsoft-Windows NT------SystemRestore
  3. in the right pane, delete the value named DisableConfig
  4. exit the registry editor.

• I received this error message after you remove the address something about Cloud.app

  I received this error message after you remove the address something Cloud.app.   Can you tell me how to fix this error message. "  '/'  "  ?

  Hello Phyllis,

  When you receive this error now?

  Let's run boot minimum troubleshooting to find the cause.

  Windows XP:

  http://support.Microsoft.com/kb/310353

  http://support.Microsoft.com/kb/316434

  Windows Vista and Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Please note that after refine us the cause, it is important that we return to a normal startup and manually delete the startup program.

  Best regards

  Matthew_Ha

• I received an error message after installation encyclopedia British and this application cannot be open.showing the "Startup MFC application has stopped working". How can I solve this problem?

  I received an error message after the installation of Encyclopedia Britannica and this application cannot be open.showing the "Startup MFC application has stopped working". How can I fix this?

  Hello

  always check the compatibility of vista programs on the link below

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  If a program is compatible with vista you can try right click on the setup.exe and then by selecting run as administrator to install it

  It is not compatible with vista, you can try running it in a previous operating system mode

  This does not work for all programs

  read the information below

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  ____________________________________________________________

  and read this information MS, too

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-the-program-compatibility-Wizard

• After many attempts computer will not allow the system restore. Received message is... Unspecified error occurred restoring the system durning

  After many attempts computer will not allow the system restore. Received message is... Unspecified error occurred restoring the system durning

  Hello

  If you use Norton, which could interfere with the restoration of the system.

  Disable Norton while doing your system restore.

  See you soon.

• I received an error message when I try publishing the fix KB-977346

  I received an error message when I try publishing the fix KB-977346
  for i386.
  I use WIndows7 professional.
  The Message is "Das ist nicht fur Ihren update computer use.

  Please help me

  Special thanks!

  Andrew G.

  Hi Andre G.
   
  1. why you try to uninstall the hotfix?
  2. How do you try to uninstall the hotfix?
   
  I would like you to follow the steps mentioned below.
   
  Step 1:
   
  a. Click Start, in the search box type "view installed updates"
  b. Select the update you want to uninstall and click on uninstall.
   
  Step 2:
   
  If this is not successful, turn on your computer in a clean boot State, and then try to uninstall the installed update. There may be a conflict of third party software. Put your boot system helps determine if third-party applications or startup items are causing the problem.
   
  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• I'm trying to install Office note 8.1 but get this error message immediately after you enter the serial number and authentication code.

  Remark Office OMR

  I've been remark office omr 8.1 installed on 32-bit windows vista (intel pentium DC) for the last year laptop. Now plan to move it to a more recent hardware and the OS.

  I'm trying to install Office note 8.1 on Windows 7 Home Basic 64 bit (on laptop AMD E450 DC base). But am getting this error message immediately after you enter the serial number and authentication code. I tried to install different versions of the .net Framework (from 1.1 to 4), but nothing seems to solve the problem.

  I even tried to install it in mode compatibality. but no luck.

  Here is the error message (between BEGIN and END lines)

  -BEGIN-

  An error occurred instantiating the object of authentication. Please restart your computer, and they run the Setup again.
  Error number = 2147219705

  Error = description

  ------ END--------

  Appreciate any help

  Thank you

  SJ

  Just for the follow-up of this: I have sent comments, and they responded in 20 minutes with:

  Please contact the Support of the note.  I'm sorry that you are experiencing this error, but it seems by the error message that you install note on a Windows 7 computer.  This error is caused by a Microsoft security update that was released in July 2011 for Windows 7 and caused upward to change our software.  Here is access to our Download Center for you to install the version 8.4 of note.  You will use your current serial number, license key and authentication code.
  They then provided a link to their Download Center where I could download 8.4
  E - mailer to * address email is removed from the privacy * and they will answer you. They have great customer service.

• Unable to play the game Age Of Empires II, you receive an error message "AppCrash.exe".

  Original title: program compatibility Application Applications Apps game games Legacy Crash accidents Application Hang hangs

  I want to play Age of Empire II...

  but it does not start...

  m make error appcrash...

  Please suggest solution for me...

  My Info system is as follows:

  System manufacturer: Alienware
  System model: M17xR3
  BIOS: InsydeH2O Version 1.0 A09
  Processor: Intel Core i7-2760QM CPU @ 2.40 GHz (8 CPUs), ~2.4GHz
  Memory: RAM 16384MB

  Operating system: Windows 7 Home Premium 64 - bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.120830) - 0333

  Display:

  Card name: AMD Radeon HD 6970 M

  Hi Girish,

  Thanks for posting your query in Microsoft Community.

  According to the description of the problem, it seems that you are having problems with the game Age Of Empires II, you receive an error message "AppCrash.exe". I'll help you fix the problem.

  (1) what version of the game is installed on your computer?

  (2) did the problem started recently?

  (3) have you made changes on the computer before this problem?

  Step 1: Let me inform you that the game is not compatible with Windows 7.

  You can check the link below:

  http://www.microsoft.com/en-us/windows/compatibility/win7/CompatCenter/ProductViewerWithDefaultFilters?TempOsid=win7&Locale=en-us&TextSearch=Age%2Bof%2BEmpire%2BII&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance&Compatibility=Unknown&LastRequested=14

  Step 2: If the version of Age of Empires II is not compatible, I suggest to install the program under Windows XP service pack 2 compatibility mode and check if that helps.

  Make older programs to run on the version of Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  I hope this helps. Try the above steps and get back to us for further assistance if you have questions about the Windows operating system. We will be happy to help you.

• Receive an error message when updating the iPad to 9.2.  What should do?

  Receive an error message when updating the iPad to 9.2.  What should do?

  What is the wording accurate and complete error message? What troubleshooting

  did you?

• I try to sync a new phone 6 s with tunes11.4 and receive an error message saying that the phone unusable because it requires a more recent version of the air.  can anyone help?

  I try to sync a new phone 6 s with tunes11.4 and receive an error message saying that the phone cannot be used because it requires a newer version of itunes.  I've updated the phone and itunes.  can anyone help?

  Sorry, iphone and itunes.

• Error message when I run delete the query in SQL Server 2008.

  Error message when I run delete the query in SQL Server 2008 SP3.

  Error message:

  MSG 0, level 11, State 0, line 0
  A serious error occurred on the current command.  The results, if any, should be discarded.

  I never got any problem since 5 years.

  Please let me know what is the cause of the problem.

  You can get a response better/faster if repost you your question in the instances of SQL Server dedicated from Microsoft here:

  http://social.technet.microsoft.com/Forums/en-us/category/sqlserver .

  Thank you.   :)

  (I'm sorry, but I can't move this thread for you because the two forums are working on separate platforms)

• Microsoft contacts the owner of the computer when they receive an error message and try and sell the owner a new download of security

  Today, I received a call saying that the man called Mark name was because microsoft had received an error message from my computer then said they would take me throught sreps to fix.   Then tried to sell me a 400.00 anti virus download it's a legitimate thing to microsoft

  Hello

  It's a scam.

  Microsoft does not contact you unless YOU have made prior arrangements with them to do.

  There is an article in the link I'm you provide at the end of this one

  Read this Information from Microsoft:

  "Avoid scams to phone for tech support.

  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

  Don't be fooled of unsolicited calls. Don't provide personal information.

  Here are some of the organizations that cyber criminals claim to come:

  • Helpdesk Windows

  • Windows repair center

  • Microsoft technical support

  • Microsoft technical support

  • Windows Support Group Technical Department

  • Microsoft Research and Development Team (team of Microsoft R & D)

  Either these so-called "Microsoft" Tech companies want to sell you a worthless software, or remote access to your computer to try to steal your credit card and bank information and also achieve an identity theft on you.

  We have all the errors and warnings in our Event Viewer

  If you gave them remote access and you do Internet banking, contact your bank, explain, and change passwords.

  If you use your online credit card, cancel and get a new one issued to you.

  And the only way that willl you know that you are free to them is to backup your data and do a clean install of your operating system.

  See you soon.

• SE error message: "the writer has had a transient error (0x800423F3)" and unable to run the system restore

  Original title: System Restore question

  I was able to use the system restore until recently. Now, I get an error message saying "the writer met a transient error. (0x800423F3) and I am helpless as to what it means.

  HELP PLEASE!

  Hi Annanj,

  This can happen when a temporary error occurs, it indicates that one or more authors VSS returned an error. To diagnose the problem, type the following command from an elevated command prompt:

  Vssadmin list writers

  a. Open command prompt by clicking on start prompt by typing in the start search box.

  b. right-click on command prompt and select run as administrator.

  c. type vssadmin list writers and press ENTER.

  This should provide information on what writer returned the error. More details about the error must also be registered by this writer in the event log.

  Check out the link:

  http://blogs.technet.com/b/filecab/archive/2008/03/12/common-causes-and-solutions-to-backup-system-restore-and-complete-PC-backup-problems-updated.aspx

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• On the system restore running the message says "system not restored" and error 0 x 80070005 is given - how to solve this problem & get sys restore running again?

  Original title: on the restoration of the system running the message says "system not restored" and error 0x80070005 is given - how to fix & get sys restore running again?

  A ran the system restore, it goes through the entire process, then said "System Restore does not restore the" files etc, nothing has been changed.

  Error 0 x 80070005
  All + ve help would be appreciated

  Hi Rodianna,

  I know you've tried some of these steps... but try this exactly showing how. First one marked 'reply' then the following below this one.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/Windows-7-system-restore-error-code-0x80070005/11c3f465-559d-4F35-B8B7-9bc010972247

  Let me know what happens.

  B Eddie