I received the Message of Windows Security Scanner: "Rogue win32/winnwebsec"(detected cannot remove)

I received the Message of Windows Security Scanner: "Rogue win32/winnwebsec"(detected cannot remove)

Advertisement

I received the Message of Windows Security Scanner: "Rogue win32/winnwebsec"(detected cannot remove)

http://www.Microsoft.com/security/portal/threat/encyclopedia/entry.aspx?name=rogue%3AWin32%2FWinwebsec

Of course, your computer is infected with a fake antivirus program.  http://www.Microsoft.com/security/PC-security/antivirus-rogue.aspx
You know the name of the program?
You have requested the assistance of your anti-malware installed program?
Otherwise since the Microsoft Safety Scanner cannot solve your problem of malware suggest that you run the following scanners which will not interfere with your program AntiVirus installed. You may need to run in Safe Mode or Safe Mode with network.

Free Malwarebytes: http://www.malwarebytes.org/products/malwarebytes_free/ or if it will not install in Normal Mode or Safe Mode with network see http://www.malwarebytes.org/products/chameleon/

Hitman Pro Trial Version: http://www.surfright.nl/en/hitmanpro you may prefer to try HitmanPro Kickstart, which should remove this malware and fix all changes made to the computer: http://www.surfright.nl/en/kickstart , you must use an uninfected computer to download it to a flash drive and then follow the specific directions on how to run the program on the infected computer.  Hitman Pro Kickstart is available as a 30 day trial version.

TDSS Killer: http://support.kaspersky.com/5350?el=88446

ESET Online Scanner: http://go.eset.com/us/online-scanner

Good luck

Tags: Windows

Similar Questions

  • Failed to install IMAPI_XP_SRV2003_x86.exe on Windows XP Pro SP3. Receive the message that is not a valid Win32 program.

    Original title: imapi.

    Failed to install IMAPI_XP_SRV2003_x86.exe on Win XP Pro SP3. Receive the message that is not a valid Win32 program. I downloaded the MS program two times with the same results.

    Hi tugadaq1,

    Your computer is connected to any domain or network?

    If your computer is in a domain environment, I recommend you ask your question in the forum MSDN for assistance:

    http://social.msdn.Microsoft.com/forums/en-us/categories

    Hope the helps of information.

  • After upgrade from Windows 7 to Windows 10 and following, less then a return to Windows 7, receives the message that Windows 7 is already false

    Original title: Win7 - Win10-Win7

    "after the upgrade from Windows 7 to Windows 10 and following, less a return to the Windows7, I get a message that Windows 7 is already false."

    Hello

    Thanks for the update.

    I suggest you refer to the articleof André Da Costa in the link mentioned for upgrade to windows 10:

    http://answers.Microsoft.com/en-us/Insider/wiki/insider_wintp-insider_install/frequently-asked-questions-Windows-10/5c0b9368-a9e8-4238-B1E4-45f4b7ed2fb9

    I hope this helps.

    Kind regards
    Anusha

  • Receive the message error "Windows Media Player cannot extract one or more tracks from the CD"

    Original title: Windows Media Player 12 in Windows 8 - will not tear, will not allow rip parameter changes

    Recently started Windows Media Player displays this error message when I tried to rip CDs: "Windows Media Player cannot extract one or more tracks from the CD." When I checked the rip settings, I found that no location has been chosen, even if I had chosen a location when I first set up WMP over a year ago. When I clicked on the "Change location" button, nothing happened, so I'm not able to choose a file location. I downloaded and Fix It (http://support.microsoft.com/mats/windows-media-player-diagnostic-Windows-8/en-us) from Microsoft allows WMP and the library, hoping this would solve the problem, but the problem persists. After that, I also found that none of the rip settings can be changed, not only the location of the file. I get an error message that "ripping settings could not be applied" when I try to change anything on the tab music Rip under Options. I found a support of forum responses that mention a registry fix but does not provide any details on how to achieve this. Any ideas would be greatly appreciated.

    Hello

    Were there any changes (hardware or software) to the computer before the show?

    Ripping allows you to put the titles of your audio CD on your PC. When you rip the tracks, they become digital files on your PC.

    There are two places in the Player library where you can customize your settings and better to make ripping work:

    • In the Rip settings menu (with less choice customization).

    • In the Options dialog box (with several choices of customization).

    Method 1: run the tool library, Windows Media Player and Windows Media Player settings and check if the extraction is possible.

    Step 1:

    a: press the logo Windows + O to open the search box.
    b: Type Troubleshooting, press ENTER.

    c: now, click on programs.

    d: and then click Windows Media Player  library.

    Step 2:

    a: press the logo Windows + O to open the search box.
    b: Type Troubleshooting, press ENTER.

    c: now, click on programs.

    d: and then click Windows Media settings.

    Method 2: Perform the steps from the link below and see if it helps.

    http://Windows.Microsoft.com/en-us/Windows-8/change-settings-for-ripping-music

    Answer please if you have any questions.

  • Receiving the message that Windows did not start because the following file is missing or corrupt: windowsroot/system32/ql.dll

    Windows could not, because the folling file is missing or corrupt... What can I do to get Windows

    Hello

    ·         What operating system do you use?

    ·         You're able to boot in Safe Mode?

    ·         Were there recent changes made on the computer before the show?

    If you use Windows 7 try performing the Startup Repair and check if it helps.

    Startup Repair

    http://Windows.Microsoft.com/en-us/Windows7/products/features/Startup-Repair

    To solve the problem of Windows Vista boot refer:

    What to do if Windows does not start correctly

    http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

    For Windows XP, see:

    How to fix a computer that does not start

    http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

  • Receiving the message 'a network security key is required to connect to oystershores.

    Original title: network security key

    I get a message from a network security key is required to connect to oystershores. What is oystershores?

    Hello

    1. What is the version of the operating system are you using?

    2. when exactly you will get this message?

    3. have you made changes on the computer before this problem?

    If you run Windows 7 or Vista, run clean boot:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135


    Please note:  After troubleshooting, be sure to start your computer in normal mode by following step 7.

    Hope the above information is helpful.

  • Can't install downloaded software, receive the message error "Windows cannot access the specified device, file, or the path"

    Cannot install any software downloaded - says "Windows cannot access the specified device, path or file.  You can not have the appropriate permissions to access the item.  This happened after I went on a bad site and downloaded something accidentally and I was not able to do anything after that.  I have avast and avast kept popping up saying I've made to a site with malware and that it would interrupt - well these pop - ups have ceased and I was scanning my computer using windows defender (which did not find anything) - but I still have problems on my computer. Should what steps I take?

    Hello

    Download update and scan with the free version of malwarebytes anti-malware

    http://www.Malwarebytes.org/MBAM.php

    You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

    http://www.bleepingcomputer.com/download/anti-virus/rkill

    If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode with networking with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    also run the sfc/scannow command.

    http://support.Microsoft.com/kb/929833

    Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

    1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
    2. Type the following command and press ENTER:
      sfc/scannow

      The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

    If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

    read the below tutorial on how to perform a repair installation

    http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  • Cannot send mail with windows mail. Get the pop-up Windows security.

    Cannot send mail with Windows Mail. Get the pop-up Windows security.

    Password and username are all correct. POP and SMTP everything is correct. If I remove all virus blocker, always get Windows security pop up asking for password and username; I type in it and click on the option to remember, but the window appears several times without sending a message. Error message box is empty.
    No problem on the end of e-mail servers. Equipped with Windows Vista.
    I deleted the Windows Mail disabled account, rebooted with the new account and the same problem.
    Can I receive the mail, but Windows Security blocking my attempts to send and don't remember the password and username that I type.
    Help!

    This kind of behavior is very often due to antivirus.  You are using.  If its McAfee or Norton get rid of them completely.   There are others who are also incompatible.  Everything you try, make sure that the analysis of e-mail is disabled.   You can also try to repair the database and see if that helps (see www.oehelp.com/WMUtil/).  And see also www.oehelp.com/OETips.aspx#3

    Steve

  • I install Windows Media Player 11 on Dell Dim/3000, I received the message to turn the system restore. How do I do that? Turn on SR, where is the button?

    I install Windows Media Player 11 on Dell Dim/3000, I received the message to turn the system restore. How do I do that?  Turn on SR, where is the button?  How can I enable the system restore?  I want to install Window Media Player 11 and this is the message I received. WMP 11 I need to re install and everything about the need to restore the system to have anyting to install?  I need HELP as soon as POSSIBLE. I'll wait for a response.  I can't play all the music that I recently downloaded.

    I received the message that the system restore is disabled.  How do I turn it on, turn so I can install WMP 11 new or I need to reinstall the latest version of WMP11 again?  Help ASAP, I'll wait for a response.

    Hi AnnieStewart,

    1. What happens when you try to listen to music downloaded in Windows media player 11?
    2. What is the complete error message you receive when installing Windows media player 11?

    See the articles to turn on system restore on the computer.

    How to turn on and off on system restore in Windows XP

    http://support.Microsoft.com/kb/310405

    Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP

    http://support.Microsoft.com/kb/302796

  • Windows Media Player cannot burn CD - R music. Worked fine until today. C00D10BA received error message. Windows media player cannot find the file. He said to repair or remove a link.

    Can't burn music CD - R. Worked fine until today. C00D10BA received error message. Windows media player cannot find the file. He said to repair or remove a link.  What is an easy way to find and fix this? I know little about the links and need a simple way to fix... Thank you!

    Hello

    You got the C00D10BA error message when you use Windows Media Player. The following information
    might help you solve the problem.
    http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.5721.5260&ID=C00D10BA&ContextId=89&OriginalID=C00D10BA

    Don't forget to click on the four " + " to see more help.

    Support for Windows Media Player
    http://support.Microsoft.com/ph/7763

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • When connecting with an Android phone through Verizon for attaching to the internet, receive the message "Microsoft (C) registry of Windows has stopped working".

    twice now that I got "Microsoft (C) registry of Windows has stopped working". Looking for online solutions, it tells me to update... and yet my Windows Update is underway. What is going on??

    I am traveling and using my Android phone by Verizon to tie to the internet... This could be the cause?

    Hi BetheForcia,

    Exactly when you receive this error message?

    Usually, this can happen due to data execution prevention.

    In order to diagnose the problem, you can check in the event viewer to determine the cause of the error and after return with details of the event viewer.

    What are the information in event logs? (Event Viewer)

    You can try to add it in the exception for the prevention of execution of data and check that it works.

    a. go to Start, Control Panel and click on System.
    b. now, click on the Advanced tab, and under performance, click settings.
    c. click on Data Execution Prevention , and then select the Turn on DEP for all programs and services except those I select: radio button.
    d. now click on the Add button and navigate to C:\Windows\System32 and choose the regsvr32.exe file. When you receive the message indicating it could make your computer becomes vulnerable to attack and unprotected, simply click OK to continue.
    e. click OK , and then click OK to exit

    Hope the helps of information.

    Please post back and we do know.

  • Problem adding network printers; received this message error «Windows cannot connect to the printer or the name of the printer...» »

    Hello

    I have a Windows XP pro (Lenovo) that I recently ran the recovery and returned to certain configurations of 1.5 years. Now I can't add a network printer and get always the message error «Windows cannot connect to the printer or the name of the printer...» ». I ping the printer and all on my network can add these printers, it's just that a machine that fails to add network printers.

    I disabled the firewall, but were still unable to add the printer. Then I found some difficulties to register for a similar problem, but they were not useful... It really becomes a big headache, especially Windows restore does not work...

    I strongly suspect that 1.5 years, someone has renamed the printer.  Use Windows Explorer to navigate to the print server through My Network Places and see what it's callednow .  Otherwise, you could ask your network/system administrator.  You should know... Please vote if this has been helpful!  Please, click on Brand or propose as answer if that answered your question!

  • What should I do when I receive the message 'unable to load the flash shockwave.

    What should I do when I receive the message 'unable to load the flash shockwave.

    Hello

     
    1. how many times you get this error message? This problem is limited to specific Web pages?

    2. Once you get this error message? What is your default browser?


    Find out what version of Internet Explorer you are using

    3. have you installed new hardware or software before the show?

    4. What is the operating system installed on the computer?

     
    5. are you logged in as administrator?
     

    Method 1:
    If you are facing problems with Internet Explorer 9, I suggest you read the article and try to run theFix it:
    Troubleshoot Internet Explorer to IE quick, safe and stable
    Note: Note that the reset Internet Explorer (IE) resets all settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords.
     
    Method 2:
     
    a. search for Internet Explorer in the start menu.
     
    b. right click and select "Run as Administrator".
     
    Check if the problem occurs.
     
     
    Method 3: Uninstall and reinstall Adobe Shockwave
     
    To uninstall a program
     

    I also suggest you to download and install the latest version of Adobe Shockwave player and check if that helps:
    Provide more information about the issue so that we can better help you.
     
    I hope this helps.
  • When answer us e-mail, punctuation change another channel of the alphabet, when the other person receives the message.

    When answer us e-mail, punctuation change another channel of the alphabet, when the other person receives the message.

    When they reply to the message, foreign brands are repeated to us. I find no access in the program to fix this problem.

    original title: problem with punctuation

    Guessing that you use Windows Live Mail 2011, take a look at this page: Why do I see strange characters in messages? It can explain your situation and offer solutions.

    Noel

  • Cannot open attachments in Microsoft Outlook, to get the message that Windows found that this file is potentially harmful and has blocked access to this file

    Original title: prevention of security Windows opening attachments

    I can't open attachments on emails sent to my email for Microsoft Outlook - it has recently started to happen. I tried to change the security settings in Outlook but they seem to be on the normal and the option to block potentially harmful messages is not checked. When attempting to open the attachments, I get the message that Windows found that this file is potentially harmful and has blocked access to this file. Any can you please suggest how to change it, it occurs on all email attachments, even those I know are safe of them have opened on another computer.

    Thank you, Alistair.

    Hello

    Sorry to hear that.

    You use a browser to open emails or a customer e-mail like Outlook Express?

    Respond with more information so that we can better help you.

Maybe you are looking for


HashFlare