I recently accidentally dropped my laptop and now whenever I try to turn it on, it gets frozen on the screen with the logo of "starting windows."

* Original title: start Windows 7

I recently accidentally dropped my laptop and now whenever I try to turn it on, it gets frozen on the screen with the logo of "starting windows." When it disappears, the screen just goes black and nothing else happens. Logins appear not at all. I also tried to run in safe mode and safe mode with networking mode, but it has not loaded yet even to the windows splash screen. I ran Startup Repair 3 times now and he has not yet fixed my problem. I was wondering if it might have been damaged in the fall.

Probably yes it is damaged in the case otherwise he would start.

Tags: Windows

Similar Questions

  • I dropped my laptop and now the screen is yellow tint

    Hello

    Recently, I dropped my laptop and turned it on to find that the screen is tinged with yellow.
    Toshiba will be able to replace my screen?

    Of course they can do. I can only imagine that you wait a few days because they have to order new parts.

    If you need addresses or numbers of phone for authorized providers in your country, you can visit http://www.toshiba.eu/innovation/generic/ASP_SUPPORT/

    Good luck

  • Windows Media Player, I made a list of music and now whenever I try to play a video just the first Picturew

    On Windows Media Player I Made A list of music and now whenever I try to play A video just the first image that comes in the video remains fair and the video does not play I just hear the sound of the video plz HELP! Please

    Hello

    Welcome to the Microsoft community!

    This problem occurs if a necessary codec to play the file is not installed on the computer.

    1. The problem occurs with all the files?
    2. Other files work well which is not there in the playlist?

    Step 1:

    Open the troubleshooting Windows Media Player settings Troubleshooter

    http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

    Step 2: Try to update the codecs to check if the problem persists. See the below mentioned the Windows Help article.

    Codecs: Frequently asked questions

    Step 3: Check if you have the latest video drivers installed on the computer. You can log on to the computer for the same manufacturer site. Also, check the latest Windows updates. Check if all related drivers are available in the optional updates.

    Install Windows updates

    Step 4: Adjust graphics hardware acceleration. To do this, follow these steps:

    a. open the screen resolution by clicking the Start button, Control Panel, and then, under appearance and personalization, click on adjust the screen resolution.

    b. click on advanced settings.

    c. click the Troubleshooting tab, and then click on change settings.

    d. move the hardware acceleration slider two notches to the left of Full (the Disable cursor and bitmap accelerations setting).

    e. click OK, and then click Restart now.

    If you need help on this issue or any problem related to Windows, please keep us informed.

    We are here to help!

  • I want to continue to use my current Vista operating system, but I forgot to turn it off before changing the parts of my PC. Now, whenever I try to turn it on, it says that the license is already in use.

    Transfer of license with a twist

    So I've recently upgraded to a new system... Virtually everything has been replaced - the motherboard, RAM, graphics card, processor... Everything but my HARD drive. I want to continue to use my current Vista operating system, but I forgot to turn it off before changing the parts of my PC. Now, whenever I try to turn it on, it says that the license is already in use.

    Is there anyway for me to be able to turn it on for my new rig? Thank you.

    If you have a retail copy of Vista, you must activate by phone.  Click Start, type "slui 4" and press ENTER.

    See http://support.microsoft.com/kb/940315

    If your copy of Vista is preinstalled on your computer, you can't use it with the new motherboard and you will need to purchase a copy of the license full of Windows.  Most of the editions of Vista out of support in two months so consider Windows 7.

  • I dropped my laptop and now windows starts too slowly or not at all, except in safe mode.

    Hi people out there

    I dropped my phone a few days ago and now Windows, when started normally, goes ridiculously slow and then stops before he installed the sidebar.

    It still works in safe mode with networking and the other.  Then one of my friends suggested I just get my vista disk and re-install/repair windows.  However, I am currently in Poland, and my drive is in Scotland.  Is there a way I can solve these problems with my windows?  Can I borrow a disc from a friend?  I am really attached to money at the moment then, really, to take it to a store is very much a last resort.

    Can anyone offer some (very basic please) advice on what to do?

    Thank you

    Cardno85

    You can also have problems of material thanks to a fall!

    See if you have a recovery Partition on your computer/laptop to restore it to factory settings.

    See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

    Normally, you have to press F10 or F11 at startup to start the recovery process...

    Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

    Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
    A good Vista DVD contains all versions of Vista.
    The product key determines which version of Vista is installed.

    There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

    If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

    http://support.Microsoft.com/default.aspx/KB/918884

    MS advice on the conduct of clean install.

    http://www.theeldergeekvista.com/vista_clean_installation.htm

    A tutorial on the use of a clean install

    http://www.winsupersite.com/showcase/winvista_install_03.asp

    Super Guide Windows Vista Installation

    After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

    Save all data, because it will be lost during a clean installation.

    See you soon.

    Mick Murphy - Microsoft partner

  • I have mistakenly left dropped my laptop and now the screen is showing black streeks, what can I do

    I mistakenly let down my laptop and there now black streeks two big places that become long and more.  Help, please

    Hello MOTHERANGEL,

    What you describe (especially the part about the bigger) resembles the screen LCD has been damaged. Black spots appear when the liquid crystal begins to spread out of cracks, over time the task will grow and grow.

    If you have some HP ADP (protection against accidental damage), you should contact HP for repair / replacement. Otherwise, you will need to repair the screen or get it repaired.

  • I went from internet providers and now when I try to send an email I get a message saying "undeliverable email".

    original title: cannot send emails

    I went from internet providers and now I can only receive emails but get the error message following "undeliverable email" when I send a.  This is the message that: 530 5.7.0 must issue a STARTTLS first command

    Don't know if you still need help...

    First of all, make sure you can access the internet.

    Means the way to websites like google.com, youtube.com, etc..

    Then make sure you can send an e-mail by mail to yourself.

    If you are unable to send an email to yourself, check the correct email typed in address.

    If it still does not work, you will need to contact your email provider.

  • I blocked a video on youtube and now I can't view. I have I get is a black screen. How can I disable this feature? and where I looking for her?

    I blocked a YouTube video using the block tab has appeared it on the top right of the video. Now, I don't see any video. All I see is a black screen. How can I disable this add on? and where I looking for her?
    Thank you

    If this does not work in mode without failure, then disable all extensions and then try to find out who is the cause by allowing both the problem reappears.

    • Choose "Disable all add-ons" on issues to troubleshoot Firefox in Safe Mode to set window to disable all extensions.
    • Close and restart Firefox after each change through "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')
  • I have 2 antivirus programs, we shut down by Windows 7 security and now cannot depend on return because I want to get rid of the current program

    I had two anti-virus / anti-malware programs on my computer.  Windows 7 security it said my computer would get better if I'm one off.  Yes, I did.  Now the program's current cost becomes too expensive and I want to turn on the program that I turned off but setting of Windows 7 to market this program is showing me these two programs, which allows me to select disabled program but the 'Activate' button doesn't highlight for me to do.

    You cannot run two anti-virus programs, they will conflict with each other, and niether work properly.

    What programs are they?

    Uninstall all the two, restart the PC, then install only the.

    MSE of MS is free

    http://Windows.Microsoft.com/en-GB/Windows/Security-Essentials-download

  • For weeks now, whenever I try to access my account, I get the same error message "server busy". Every time!

    Frustrating to say the least

    Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

    -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

    -https://helpx.adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

    -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

    -https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html

    or

    Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

    Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

    Don't forget to stay signed with your Adobe ID before accessing the link below

    Creative cloud support (all creative cloud customer service problems)

    http://helpx.Adobe.com/x-productkb/global/service-CCM.html

  • I recently dropped my laptop and it is weird, one day he int open up to 4 start times and sometimes it shows me a folder and a question mark in the interface and sometimes asked to reset my password, what are the steps to take?

    I recently dropped my laptop and it is weird, one day he int open up to 4 start times and sometimes it shows me a folder and a question mark in the interface and sometimes asked to reset my password, what are the steps to take?

    Anything can be corrupted on your MacBook Pro, but from what you say, it seems that the cable drive/SSD/flash memory/SATA hard was seriously damaged. Him "question mark" means that your Mac is unable to find any bootable device, meaning that it does not yet detect your OS X drive.

    You should make a backup of your files (if you can still do it) and take the Mac at the Apple Store or dealer to get a diagnosis. There may be several damaged parts.

  • I have always used Acrobat Reader to download the Overdrive of the library books and transfer them in my corner. I recently got a new laptop and had to download Acrobat Reader DC. Now I can no longer download books from Overdrive. I get a message saying t

    I have always used Acrobat Reader to download the Overdrive of the library books and transfer them in my corner. I recently got a new laptop and had to download Acrobat Reader DC. Now, I can download is more Overdrive Audiobook. I just got the message that this format is not supported. Any suggestions?

    I could be wrong, but I do not think that you used to use Adobe Reader. I think you used to use Adobe Digital Editions software instead - a separate app.

  • My daughter dropped her ipad and now the screen is yellow - help!

    My daughter has recently dropped its ipad and now the screen is yellow - help!

    Screen most likely is damaged or it has hardware problem.

    Try resetting your device. This will not erase your data stored on that device.

    • Press and hold the sleep/wake button
    • Press and hold the Home button
    • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

    If it does not help take your device at the Apple Store for further diagnosis. Good luck.

  • I recently changed internet service providers and now my Wired desktop can't connect to the internet.

    I recently changed internet service providers and now my Wired desktop can't connect to the internet.  I noticed that the connection is showing 'Automatic private address' can I connect all my fine wireless devices.  I did extensive troubleshooting with my service provider, but they suggest that my master's degree network adapter must be replaced.  I updated the driver, and the device manager says it's working properly. If I connect the same wire for my laptop, it works fine.  This is just my office.  Any ideas how can I fix?

    Hello

    Follow the steps in the KB article below and see if that fixes the problem.

    How to troubleshoot possible causes of Internet connection problems in Windows XP
    http://support.Microsoft.com/kb/314095

  • I dropped my iPhone and now it won't turn! fear a lot what do I do now?

    I dropped my iPhone and now it won't turn! fear a lot what do I do now?

    Your best bet is to get to a repair facility independent of having your phone looked.

    iPhone 4 s are little tough suckers, so you can have just a disconnected, damaged screen or display battery disconnected in the drop-down list.

    Your option at Apple is a one off replacement warranty on a 4S which means turn into your phone, pay $199, get a 4 s handed to nine.   It's too much pay for a 4S these days.

    In a shop that specializes in independent repair, someone can help troubleshoot your phone to see if it is a problem of display which are highly soluble or battery. Cost-$ 50 - $100 depending on the problem (s).

    If you have more serious damage to the Board, then it can be useful to continue given the value of the unit.

    How to identify a quality independent repair shop?

    Do the research.  Not all independent repair shops are trustworthy, and the quality of the parts they use can vary.  Looking for a store with good reviews, a solid guarantee at least 6 months on the repair and a guarantee to solve your problem or toll-free.  Ask that they source their parts.  Any store claiming to use real Apple original parts should be avoided, as this is not possible.  Independent repair is a fantastic option for comfort and savings, but you have to do some legwork to find a store in your area, given that many of those unscrupulous.

Maybe you are looking for

  • I want to reverse the display full page

    I turned on to full page display in the screen of my FB and now can't access all the tools to reverse the trend.I also accidentally decreased the font size & need of restoration, but don't know how.

  • Modeling 3D (Sketch Up) programs keep crashing on the Satellite C660 - 28 d

    Hi guys,. Obtained the Satellite C660 - 28 d to Christmas as my old laptop was dying on its feet. So far I've had no problems with it, except for when you use a selection of programs, namely Sketch Up and the rhinoceros are two 3D modeling programs.

  • WRT1900AC updated firmware over wireless?

    I have a router WRT1900AC On my last router, it was very important to make all updates of firmware via a wired connection On this WRT1900AC, I read the firmware upgrade process p.43 user guide and it is said you can leave it on the automatic update o

  • DeskJet 3520 - print Invitations

    I use a HP Deskjet 3520 on a Windows 7 PC. I am currently trying to print an invitation 5.5 "x 8.5" on Word 2010 and little matter the customizations that I try to do through word itself or the properties of the printer, the output prints still on th

  • Microsoft Defender is blocking the start of digital line (DLG.exe) by Avanquest Software detection

    Hello I use professional Vista as the operating system of my laptop.  Recently - specifically, since having started using COMCAST (cable TELEVISION) - provided internet service - I started having a condition of starting Windows in which Windows Defen