I recently got a laptop (Windows XP) that has wireless when I try to connect to the internet using ethernet

I recently got a laptop (Windows XP) that has wireless when I try to connect to the internet using a lan cable plug on my netbook (win 7 starter) that has wireless it gives me limited connectivity and no internet

Hi evilcrebyc,

Consult the following Microsoft articles and make sure that all settings are correct.

How to configure Internet connection sharing in Windows XP

http://support.Microsoft.com/kb/306126

Troubleshooting Internet connection sharing in Windows XP

http://support.Microsoft.com/kb/308006

Tags: Windows

Similar Questions

  • When I try to connect to the internet using my laptop, I get an error code. He says that I'm connected to the internet, but I am unable to connect.

    Unable to connect laptop (wireless) broadband

    Recently, I changed to wired broadband. When I try to connect to the internet using my laptop, I get an error code. He says that I'm connected to the internet, but I am unable to connect.

    Remove any preconfigured network settings wireless then rescan to make new connection settings

    Hope this will do the needfull

    Please let us know

  • Upgrading from Windows XP to Windows Vista and now I can not find wifi or when I try to connect to the internet, I get an error, "a cable is not plugged on the network card.

    Wireless connections

    I upgraded my dell vostro laptop 1000 Windows xp to vista and now I can not find wifi or when I try to connect to the internet I get an error, "a cable is not plugged into the card network", "connection to the Local network. Everything worked fine until I upgraded. I noticed in my device manager, the driver for the system controller and core network are not installed. Could it be the problem? Is someone can you please help me understand this?

    Hello

    I noticed that you had created another similar to this question. Have you tried the steps suggested in this post?

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/how-do-i-put-WiFi-back-on-my-PC-after-upgrading-to/c9b90ec1-8393-4B57-b4af-2fbeb802af58

    You can also try the following methods and check if it helps.

    Method 1:

    Update a network adapter driver.

    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

    Method 2:

    Troubleshoot network adapter problems.

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  • Message: Service dependecy or groups could not start "when you try to connect to the internet from a wired computer.". Is there a way to reset windows?

    My system can not go on the internet.  I get this message at the dependecy service or groups could start "is there a way to reset windows in vista with deleting all of my files?  I have a return to the top of vista on drive d.  How can reset these settings? The router and modem are fine.

    My system can not go on the internet.  I get this message at the dependecy service or groups could start "is there a way to reset windows in vista with deleting all of my files?  I have a return to the top of vista on drive d.  How can reset these settings? The router and modem are fine.

    Suggestions:
    1. temporarily disable your antivirus software. See if the problem has disappeared. If so, the time to consider a different security program.

    2. Do a system restore, if you can pick a date when he did not have this problem as your restore point.
    Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
    To sit and wait. The machine restarts when it's done.

    3 do a file system check. See if the file check can find any corrupt fields and fix.

    Start button > Search box type cmd > look up, do a RIGHT click oncmd.exe > click onRun As Administrator > in this window cmd black and white, type at the prompt flashing sfc/scannow > press the ENTER key.
    Note: there is a space between 'sfc' and ' / '.
    To sit and wait. It will take time.
    When finished, exit the cmd window.
    Reboot (restart your computer)

    For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

  • When I try to connect to the net on my laptop LG I often get the message saying that windows could not connect.

    Windows does not remember the setting.

    When I try to connect to the net on my laptop LG I often get the message saying that windows could not connect and I have to go into the advanced settings and check the box that says allow windows to configure the network. My problem is that windows doesn't remember this setting and that I need to check the box almost everytime I try to connect. He made it with my desktop so I was wondering if anyone has a solution for this.

    Using a wireless router? What is the brand and model of your router? I don't think it's a matter of windows.

    Troubleshooting in windows wireless network connection problems

    http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows

    Hope this helpful. Post back if your problem is not resolved in the link above.

  • Windows cannot connect to the Internet using HTTP, HTTPS or FTP. __This is probably caused by settings of firewall on this computer. __

    I recently installed the version of Norton, after that I was unable to use the internet, I thought it was the Norton firewall settings. After having playing with her for 30 minutes, I gave up and uninstalled Norton. I have disabled the firewall, I have reset the default settings. Here is the message I get when I run a diagnostic. A crazy thing is that I can connect to internet when I connected to this same computer as a guess.

    Please help me!

    Windows cannot connect to the Internet using HTTP, HTTPS or FTP.
    This is probably caused by the settings of firewall on this computer.

    Check the settings of firewall for the HTTP port (80), HTTPS port (443) and FTP port (21).

    Hi rhonda9937,

    1. what browser you are using to connect to the internet?

    It is not recommended to keep Windows Firewall disabled on the computer.

    This would happen if the ports are not open in the Windows Firewall.

    I suggest that you open ports in Windows Firewall and check if it works.

    How to manually open ports in Internet Connection Firewall in Windows XP

    http://support.Microsoft.com/kb/308127

    Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users

    http://support.Microsoft.com/kb/875357

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • whenever I try to connect to the internet (mozilla firfox) it says I have to buy vista security 2011 to clean my laptop. How can I get rid of this to connect online

    whenever I try to connect to the internet (mozilla firfox) it says I have to buy vista security 2011 to clean my laptop. How can I get rid of this to connect online

    Hello

    these rogue program names belong to a type of malware using different names but producing the same results

    Read and follow the EXACT at the below link removal instructions

    Read this information

    Vista anti-virus 2011, Vista Total Security 2011, Win 7 Home Security and include some of the names by a rogue new name change randomly to settle on the victim's computer.  When this particular rogue is installed, it will install as a variety of names in different programs, with each having their own graphical user interface according to the version of Windows running on the computer. Whatever the name, however, they are all the same exact program with just a different name and skin on this subject. This rogue goes by many names in different programs, of which I have listed below depending on the version of Windows that is installed on:

    Windows XP rogue names
    Names of Windows Vista Rogue
    Windows 7 fake names
    XP Antivirus Vista anti-virus Win 7 antivirus
    XP Antivirus 2011 Vista anti-virus 2011 Win 7 anti-virus 2011
    XP Anti-Spyware Vista Anti-Spyware Win 7 AntiSpyware
    XP Antispyware 2011 Vista Antispyware 2011 Win 7 antispyware 2011
    XP Home Security Vista Home Security Win 7 Home Security
    XP Security 2011 Home Vista Security 2011 Home Win 7 Security 2011 Home
    XP Total Security Vista Total Security Win 7 Security Total
    XP Security 2011 Total Vista Total Security 2011 Win 7 Security 2011 Total
    XP security Vista security Win 7 Security
    XP security 2011 Vista Security 2011 Win 7 Security 2011
    XP Internet Security Vista Internet Security Win 7 Internet Security
    XP Internet Security 2011 Vista Internet Security 2011 Win 7 Internet Security 2011

    Follow the EXACT below removal instructions

    http://www.bleepingcomputer.com/virus-removal/remove-win-7-Internet-Security-2011

  • Windows asks for a password when you try to access to the "view work group computers."

    We are on a network.  Main computer, that we can access through the receptionist connect you and access shared files on this computer.  Computer from the receptionist, windows asks for a password when you try to access to the "view work group computers."  We tried to use its password.  However, the shared files are still not accessible.

    Hello

    1. what happens when you enter the password?

    2. how many computers are connected to this working group?

    Refer to this link and check: You cannot access shared files and folders or browse computers in the workgroup with Windows XP

    http://support.Microsoft.com/kb/318030

    I hope this helps!

  • Whenever I try to connect to the internet, it gives the error message 651 windows 7

    Original title - windows 7 651 error

    I recently installed windows 7 and I use a broadband connection... Whenever I try to connect to the internet, it gives the error message 651 while I had no problem with this broadband connection in windows 8.1... How to fix this error, please help me...

    Hi Alexandra,.

    Please contact Microsoft Community.

    • You use a wired connection or wireless?

    Method 1: I suggest you use the resolution of the problems of the article below Internet connection and check if it helps.

    In Windows network connection issues

    https://support.Microsoft.com/en-us/KB/313242

    Method 2: Try disabling your antivirus software and then try to connect again and check if the problem persists or not.

    http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

    Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

    Hope this information was helpful and let us know if you need more assistance. We will be happy to help.

     

  • When you try to connect to my router using the IP address, he continues to ask for a password of windows security.

    When you try to connect to my router using the IP address, he continues to ask for a password of windows security.  I don't know what it is, I tried recording with every combination I can think.  Can anyone help?

    If you do not know the password of the router, then chances are good that you will need to reset it to the factory settings. Google your model and you should be able to find the instructions.

    I hope this helps.

  • Several times after that I opened Google it does not connect to the internet. Has worked for a long time, and now it will not. Sometimes it opens if you "Refresh" sometimes not. Please help.

    Several times after that I opened Google it does not connect to the internet. Has worked for a long time, and now it will not. Sometimes it opens if you "Refresh" sometimes not.  Help, please. It has been stable over the years and now it will not work. I get no help when I diagnoise of problems, but I never. It has been checked and rechecked. PitStop does not even recognize a problem. I could change the homepage, but I prefer to use Google if it works. Frustrating.

    You may need to update your toolbar, google has made some changes just about everything and possibly that the page is not where it used to be.

  • After upgrade from Vista to Windows 7 Ultimate home, no problem connecting to the internet when logged as an administrator, but cannot connect to the internet using the standard account. How to fix this?

    After upgrade from Vista to Windows 7 Ultimate home, no problem connecting to the internet when logged in as an administrator,

    but unable to connect to the internet using the standard account.  I have the latest version of the Solution Explorer.

    How to fix this?

    Glad to hear it.

    If the problem is resolved, mark the message as response, then it'll be useful for people with similar/identical problem.
  • Windows cannot connect to the Internet using HTTP, HTTPS or FTP. This is probably caused by the settings of firewall on this computer.

    I have a laptop Toshiba Satellite M105-S3041 with Windows XP Home Edition.  I received the error message listed above indicating that Windows cannot connect Internet using HTTP, HTTPS, or FTP.  When I open the wireless network connection status, I see packets sent and I also see that I get both packets.

    The opening to the top of Internet Explorer, I received the error message listed above.  When I go to the properties of my wireless adapter and examine the properties of the TCP/IP parameters, I see that I have "obtain an IP address automatically" and "Obtain DNS server address automatically" checked.  On the general tab of TCP/IP properties, I clicked on the tab advanced and click on the tab options to display the TCP/IP filtering settings and clicked the properties button.  Here, I see that the ports TCP, UDP and IP PROTOCOL.  I have a check the box 'enable TCP/IP filtering '.

    Please help me because I am still unable to connect to the internet.

    [snip]... On the general tab of TCP/IP properties, I clicked on the tab advanced and click on the tab options to display the TCP/IP filtering settings and clicked the properties button.  Here, I see that the ports TCP, UDP and IP PROTOCOL.  I have a check the box 'enable TCP/IP filtering '.

    In general, you don't want to have a check in the box "enable TCP/IP filtering.  Try to uncheck this box and see if it helps.

    If this does not help, two programs freeware difficulty sometimes of the problems of this kind...  Try to run LSPFix and/or WinSockXPFix.  Alternatively, you can try to reset your IP stack...

    "How to reset the Protocol Internet (TCP/IP)"
      <>http://support.Microsoft.com/kb/299357 >

    HTH,
    JW

  • My windows xp does not connect to the internet using the host card

    I recently reinstalled windows xp, the windows disk. When I plugged my homeplug (Edimax HP-2003AV), that it does not record that I have nothing plugged, it is an old computer, but still works very well, please help with this!

    Hi AaronEastman,

    ·         You get the error message?

    Follow these methods.

    Method 1: Follow these steps:

    Step 1: Start the computer in safe mode and check if the problem persists.

    Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

    Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

    After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

    (a) click Start, run.

    (b) type msconfigand click OK.

    (c) the System Configuration Utility dialog box appears.

    (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

    (e) when you are prompted, click restart to restart the computer.

    Method 2: Temporarily disable the security software.

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 3: Follow the steps in the article.

    Windows wireless and wired network connection problems

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    How to reset the Protocol Internet (TCP/IP)

    http://support.Microsoft.com/kb/299357

  • My laptop Vista with Atheros AR5007 802. 11 b / g adapter does not connect to the internet using the local area or wireless network connections

    I just bought a new router d-link wireless n for my house.  Connect my Win 7 Desktop, laptop xp to Acer and multitude of other devices, but my laptop Vista with Atheros AR5007 adapter does not connect to internet.  I tried to disable IPv6, defining the name of the network, flushing dns cache, etc..  Nothing will work.  (It would not connect to an another 802.11n router in January either.)

    I get local only on both connections Wi-wired and wireless, no matter what I do.
    I'll send this to my office that I can not connect my laptop to the internet and he does not see the other machines on the network.
    Any suggestions from anyone?  I spent hours trying to solve the problems, now completely stumped.

    OK, here was my fix:

    I tried a lot of things, but they do not work.  I downloaded a 'new' driver of HP - it turns out it was the original with the problem.  I found another one that was about a more recent months, still does not work.  I finally managed to get the atheros.cz driver for my card files.  But they do not have an installation file.  I had to search for each old file in its directory, copy it to another place (to be sure, just in case) and then copy and replace the old file with the new file in the original folder.  Fortunately, there were only 6 files, but it took about an hour and a half.  This isn't a lot of time compared to the 18 or if I was just trying to figure out the problem.  Now, my laptop connects to the internet without problem.
    I had this problem with a router "n" beginning of the year in a hostel.  The guy in the Inn told me that he had seen before once.  It's obviously a common problem with these cards (as seen on the "solutions" online) and Vista.  I'm always hating on Vista after this problem.

Maybe you are looking for