I renew the DHCP on my Airport Express Extender several times a day.

Similar Questions

• WhatWhere is the plug-incontainer? happened to the plugin container? He disappeared with the latest version and now firefox crashes several times a day.

  I do not see the plugin container in the task manager of Windows since the last update of Firefox and now FF freezes several times per day (since the previous update, before yesterday). It takes several minutes after that I see this until it thaws, and it is faster the "end task" and restart Firefox to wait. This most often seems to happen when the computer has been idle for a certain time, rather than when I use it.

  Be sure to let the process of plugin-container in the firewall.

  • http://KB.mozillazine.org/plugin-container_and_out-of-process_plugins

• Change of modem can improve the speed of Airport Express Extender?

  My router is a Airport Extreme 6th Gen.

  When Wi - Fi and close this Airport Extreme base station, I get average speeds of:

  117 Mbps down and > 11 Mbps upward

  At the opposite end of the House, I use a wireless extension: Airport Express 1 St gen - model A1264 (MB32 1LL/A)

  Here, the download speed goes up to 14mbps . 

  Download speed rest > 11 Mbps

  My ISP will not have my current cable modem: 6580 Motorola (jumpered to disable router) to provide speeds greater than 100/10 (though even I can actually slightly higher than average, I have indicate above).

  If I replaced the modem with my ISP (Time Warner Cable) provisions for 200/20Mbps (speeds I pay in fact) - and * if * I got then that 100 Mbps speed increase (wireless) when close to my Airport Extreme base station (and I think I'll) - should I then expect to see a significant speed increase at the opposite end of the House , where I rely on the Airport Express wireless extension?

  In other words, is expected to double the speed of my modem now gives me wireless (when you're on my Apple Extreme base station) also be reflected in an increase in speed at the end of the House where I must rely on the Express Extender 1 generation and where I am now only download speeds see 14Mbps?

  BTW:

  1. I can not move my extreme or my Express.  They both must stay exactly where they are. Neither can they cannot be permanently interconnected via ethernet cable.

  2. I don't think the speed reduction I describe is a bandwidth issue because I am the only one on the network and do not have multiple downloads on several devices at the same time.

  Before I ring $$$ on a modem that won't improve my speed, you will appreciate any guidance I where I need more.

  Change of modem can improve the speed of AirPort Express Extender?

  Just a little, at best. The Express pourrait spend 25-30 Mbps. No guarantee, with strangeness wireless... it is maybe the same or worse based on my experiences.

  If you need more speed at the end of the House... the AirPort Express must be located to half way between the AirPort Extreme and the end of the House. Ideally, he would have line-of-sight with AirPort Extreme.

  Yet, you say that you can not move the Express or the extreme and can't get the Ethernet cable. Have you considered or tried Powerline Ethernet adapters?

• Outlook Express wants to compact files several times per day

  I deleted most of my Deleted messages and sent folders and I greeted the OE to go through the process of compaction, but happens several times a day and it's driving me crazy!   I went into the Maintenance tab under Tools, but it doesn't seem to be a solution.  I have to save at least 3 months of messages in these files for commercial purposes.  What can I do to prevent it from appearing?

  Compacting does not delete messages, only the space wasted. If you don't lose messages, it's either because of damaged files or disrupt the process of compaction.

  If you compacted it completed successfully, and you see the prompt earlier that 100 closures of OE, then see if you have Windows search installed. If you do, you need to tell Windows Search to stop indexing OE.

  In the control panel. Indexing Options. Change. Clear the check box for Outlook Express.

  If you have lost messages during compaction, see this.

  Two reasons the most common for what you describe is disruption of the compacting process, (never touch anything until it's finished), or bloated folders. More about that below.

  Why OE insists on compacting folders when I close it? :
  http://www.insideoe.com/FAQs/why.htm#compact
   
  Why mail disappears:
  http://www.insideoe.com/problems/bugs.htm#mailgone

  Recovery methods:

  If you use XP/SP2 or SP3, and are fully patched, then you should have a backup of your dbx files in the Recycle Bin (or possibly the message store), copied as bak files.

  To restore a folder bak on the message store folder, first find the location of the message store.

  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

  In Windows XP, the .dbx files are by default marked as hidden. To view these files in the Solution Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder options | View.

  Close OE and in Windows Explorer, click on the dbx to the file missing or empty file, then drag it to the desktop. It can be deleted later once you have successfully restored the bak file. Minimize the message store.

  Open OE and, if the folder is missing, create a folder with the * exact * same name as the bak file you want to restore but without the .bak. For example: If the file is Saved.bak, the new folder should be named saved. Open the new folder, and then close OE. If the folder is there, but just empty, continue to the next step.

  First of all, check if there is a bak file already in the message. If there is, and you have removed the dbx file, go ahead and rename it in dbx.

  If it is not already in the message, open the trash and do a right-click on the file bak for the folder in question and click on restore. Open the message store up and replace the .bak by .dbx file extension. Close the message store and open OE. Messages must be in the folder.

  If messages are restored successfully, you can go ahead and delete the old dbx file that you moved to the desktop.
   
  If you have not then bak copies of your dbx files in the Recycle Bin:

  DBXpress run in extract disc Mode is the best chance to recover messages:
  http://www.oehelp.com/DBXpress/default.aspx

  And see:
  http://www.oehelp.com/OETips.aspx#4

  A general warning to help avoid this in the future:

  Do not archive mail in default OE folders. They finally are damaged. Create your own folders defined by the user for mail storage and move your mail to them. Empty the deleted items folder regularly. Keep user created folders under 300 MB, and also empty as is possible to default folders.

  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

  And backup often.

  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx

• HP ENVY x 360: drive the power outage status several times a day?

  It seems to be random, and it was only once or twice a month, but now its several times a day. First of all my internet stops working. To the point where it shows the yellow triangle on my symbol of the internet and only wifi it can 'find' is that it was previously connected to (although he refuses to reconnect). Once the fix is a restart, then turn on the wifi card as admin (that I don't know why it goes off in the first place), but most of the time that isn't the case. I'll try a reboot, it takes about 7 minutes to restart completely after the "DRIVER_STATE_POWER_FAILURE" is displayed on a blue screen.
  
  I tried what I found online. Boot in Safe Mode and uninstalling the bad driver, but that's the problem. I don't know which driver is the problem, because none of them has the yellow triangle. So this would be another problem causing this problem?

  Hi @LolicOnii,

  Thanks for the update on the situation.

  You still want to search the drivers updated, simply because the Device Manager does not display that a mistake does not mean that the drivers are up to date. You can follow this document since it will helps you update the drivers supplied by Device Manager and other troubleshooting suggestions.

  Let me know how do you with this information.

  Thank you!

• Light (switch) on my screen does not turn off. I have to shut my computer down several times a day to turn off the monitor.

  Light (switch) on my screen does not turn off.  So, I shut down my computer and restart several times a day, because when I put it in mode 'sleep', he wakes to the top in a few minutes and will not fall asleep.  I could put a blanket on my screen when not in use, but I'd rather find a way to make it stay asleep when I tell him.

  Light (switch) had already done once before and I was so worried that once I turned off the monitor that I would never get it new on... a bit short of money here, to buy a new monitor, but the next day, I pressed the power button with an additional downward pressure and I could so he could start working again (able to turn the market monitor).  It was about 3 weeks ago.  Now, the light stays green, unless I stop the whole computer.

  Maybe my main problem is sleep mode, which removes the screen for like 2 minutes and then he wakes up to the top and is so rude when I myself and try to sleep, I just turn off the monitor everytime I put the computer to sleep.

  Now, I can't turn off the monitor, except by turning off the computer.

  Hi JDandGinger,

  I suggest you follow the provided article and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-power-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-monitor-and-video-card-problems

  If the problem still persists contact the manufacturer of the monitor for more help and information.

• Lose the connection to Windows 7 computer on a network, have to reboot several times a day to keep XP & Vista connected computers on it.

  I have a Windows 7, with other Vista and XP computers on a network.  I use MSHOME as the doman. I have disabled the firewall, I disabled Ipv6 on Windows 7 computer.  I use no password on the network.  I have to restart my Windows 7 computer several times a day because regularly it will block other computers and network equipment.  I reboot will allow everyone a new access for a couple of hours, then boom, no one can get to me.  Are there reasons that this could happen?

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the Forums of Windows 7 networking.

  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

• I had a subscription to photoshop and aftereffects. Can I put these programs on the second computer or that will bring several times?

  I had a subscription to photoshop and aftereffects. Can I put these programs on the second computer or that will bring several times?

  Creative cloud products are not transferable. You need to download again.

  Please see:

  Download Adobe Creative cloud apps | Free trial of Adobe Creative Cloud

  https://helpx.Adobe.com/creative-cloud/help/download-install-app.html

  Concerning

  Megha Rawat

• Cloud of continually closes, and closes all the fonts I have loaded? I have to log in several times a day?

  Cloud of continually closes, and closes all the fonts I have loaded? I have to log in several times a day, someone knows why?

  Please follow:

  https://forums.Adobe.com/thread/1830010

• I get "Trial Expired" notice several times a day, even if I connect and the software license

  I still have an annual subscription of Acrobat, for some reason, the subscription doesn't "stick". I have the 'licence' the software several times per day to continue to use the tool. I see others have this problem with the CC products. What is the solution permanent?

  Hi Shayne,

  What is the level of access you have on this computer. Are you the domain user or you have local Admin Access.

  Try to download and install Adobe application Manager and log in with your Adobe ID: http://www.adobe.com/appsmanager/

  Looks like the problem you're reporting there is permission with your computer problem.

  Do you have any firewall or network security in place?

  Kind regards

  Ajlan Huda.

• Why is the signal to my airport express base station weaker?

  My airport express base station to base station (part number MC414LL/A) has worked well for the first 3 years, but now has a weaker signal is no longer covers the apartment. The location has not changed and we have not added all of the devices that could create interference.

  Any help would be appreciated.

  Bill

  3 years... average... is on when the internal of food inside the Express starts slowly the head downhill, so maybe it's a factor here.

  If you don't have already done, power off the AirPort Express for a few seconds, then put it to the top. When you start the Express, it will automatically scan all channels use wireless sector and select the best channel to use both.  If you live in a crowded environment, you may have to restart the AirPort Express on a regular basis.

  If there is no improvement after a few reboots of the Express, on what you can do at this point is to reset the device back to the default settings and then set up again to see if a new beginning offers some improvements in the intensity of the signal.

• There is Airfoil and Airport Express, latency/delay time?

  I want to be able to direct the output of my iMac "end 2014' 5K (10.11.6) on my stereo system (ParaSound P3/A23) using AirFoil 5 with Airport Extreme > Airport Express."

  But the audio output should be "real time." in other words, no delay or latency at all. Both are in the same room!

  I use notation software (Sibelius) and need to hear what I write immediately. Unlike streaming where I think there is an acceptable delay (2 seconds?) for the buffering?

  Is this possible please?

  If it isn't with AirFoil, any advice on how welcome :-)

  I want to be able to direct the output of my iMac "end 2014' 5K (10.11.6) on my stereo system (ParaSound P3/A23) using AirFoil 5 with Airport Extreme > Airport Express."

  With AirPlay (or Bluetooth), there will always be a form of delay or latency with streaming audio.

  In this scenario, an audio stream (on AirPlay) will go first to your iMac to AirPort Extreme and AirPort Express Terminal.

  To help understand why there will be delays, let's look at high-level "behind the scenes" about how works AirPlay:

  For the AirPort Express (AX), audio input is provided mainly by iTunes. Of course, it can also get feedback from other sources as you know, as of Rogue Amoeba's Airfoil.

  For streaming, iTunes or wing does most of the work. What is app reads audio content standard (AAC, MP3, audio books, Internet music streams, etc., it decompresses these file formats and creates what is essentially a raw, uncompressed audio stream.) This stream is compressed using Lossless Compression of Apple (via a QuickTime codec), encrypted with AES 128 bits and then listened (airplay) with an AXE. The stream is buffered for about 2 seconds until the stream is sent. The AX deciphers the flow, decodes and exports in a digital or analog PCM (using a built-in DAC) flows to its audio analog-to-digital versatile optical port.

  So, with the above, you can see that the tone does not simply move source to the destination without much more things. You will not be able to entirely eliminate the delay. Sorry!

• When I dictate, at the end of the period of 45 seconds, he rewrote several times

  Using the dictation, at the end of the period of 45 seconds, the text flows and changes several times, sometimes repeat a phrase or the deletion of a sentence. What is going on? If I stop before the 45 seconds, that it behaves correctly.

  If you haven't already done so, please activate Enhanced dictated in the preference pane Dictation and speech . See if there is an improvement.

• Trying to get into my email account but the customer service will not recognize me as owner, have no cell phone, have the right password and have used it several times.

  , customer service will not recognize me as owner, have no cell phone, have the rite pass it used several times

  original title: How can I get my email account

  Hello

  Which email service provider?

  If you use hotmail or Windows Live account, you can post your request in the Forum Windows Live for other assistance or contact offer your e-mail service.

  In the Windows Live Forum

• method of before the Phase of initMethod() in view calling several times:

  Hello world
  
  I dragged a table as read-only table with simple rank of verified selection.
  A button to go there in the page.
  The code in the go button takes the curretn by selecting the current row and the values of print.
  The initMethod() code is execution of the VO.
  
  The problem is when the page load the initMethod() (before the phase in view) calls several times even after loading the page.
  Continuously its call to this method.
  
  How to call only once when the page is loaded?
  
  All suggestions will be really useful.
  
  Thank you.

  Hello Kumar,
  There are many topics on the web to achieve this.
  This is one of them
  https://blogs.Oracle.com/ADF/entry/an_epic_question_how_to