I replaced my printer, but in the meantime an automated program sends print jobs to the old printer, I need reasign these jobs to print on the printer. __

I want reasign the print jobs to the printer and print documents because the documents are no longer available due to the automated process.

Advertisement

Hello Fishinmad02,

Thank you for your message.  Check-post of the thread located HEREDaniel.

Is it possible to move or copy a print job to a different printer?  My problem is I printer a few documents on the web to a printer that has been disconnected (not plugged into my USB port).  Is it possible to move or copy print jobs to another printer that I have on my system?

I have not found a way to do it directly.  However, I found a work around that worked for me in my situation.  I went to the print queue, go to the tab printer, then properties, then the Ports... I've temporarily changed the port to point to the IP address of another printer (by changing the checkbox).  After printing the queue, I just put the IP and port back.  My two printers were of the same type, so I don't know if it would work with different printers.
Daniel
Please let us know if it did or did not help to solve your problem.
See you soon

Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

Tags: Windows

Similar Questions

  • HOW CAN I REPLACE EXPIRED INK CARTRIDGE IN THE PRINTER ALL IN ONE HP OFFICEJET PRO L7780?

    HOW CAN I REPLACE EXPIRED INK CARTRIDGE IN THE PRINTER ALL IN ONE HP OFFICEJET PRO L7780?

    I DO NOT PRINT A LOT AND I HAVE TWO PRINTERS. THE EXPIRATION DATE ON THE CARTRIDGE, THE PRINTER DOSE NOT LET ME PRINT. I KNOW THAT THERE IS WAY TO OVERRIDE THIS PROBLEM, BECAUSE ON MY PREVIOUS PRINTER THEY REPLACES THE KEY.

    The error message itself will remain but will continue to print. This message will remain until the cartridge is replaced. Substitution is the printer printing always regardless of the error message on the display screen.

  • 8250 incorrect "date of expiration" and "Empty cartridge" message. Ink replaced but still the message.

    I got the expired cartridge message on my Photosmart 8250 for a year or two, for 2 cartridges, even if the cartridges were of the date. Remove one of the offending cartridges and replace immediately seem to do the sorting.  Problem is one of the "expired" cartridges, Magenta, has finally shown as empty and reinstated. I get now both the message expired and the empty cartridge (for all new Magenta). The watch also still message has expired for the cartridge else I have to say is now quite old, but still has a lot of ink in it.

    I gritted my teeth and to purchase 2 cartridges of spare yesterday, one to replace the old "expired" clear cyan and the other to replace magenta of replacement. The clear cyan expired message disappeared but the message re magenta is still show it as being expired, even if the dates printed on the two new magenta cartridges is 2014. I always get the message empty cartridge for both the first replacement magenta cartridge that I bought a few days ago, as well as for the second replacement I bought yesterday.

    I have tried everything I can find mentioned in this forum to solve this problem, but have had no success. I have to assume that the printer has failed, or is there a fix for this problem?

    If you have another cartridge, which could remove the error. You do not have to throw away your existing criteria, just put them in a ziplock bag in plastic and place them in a cool, wet - spot like a refrigerator. Change the cartridges and see if this removes the error message.

    If you can try that let me know and I'll be right back with you!

    Have a wonderful day!

    -Spencer

  • I replace my airport express with the new model. Flashing orange. It works, but cannot configure security. Tried to reset via the reset button.

    I replace my airport express with the new model. Flashing orange. It works, but cannot configure security. Tried to reset via the reset button. Tried unplugging and tried unplugging the modem. I would like to fix.

    Modem... doing and... model number you have?

    What operating system do you use on your Mac, or you are using an iPhone or iPad set things up... or a PC?

  • El Capitan 10.11.2 disconnects from the network of Canon printer macbook pro after each use but with the same OS version iMac remains connected

    How to prevent my Macbook Pro El Capitan 10.11.2 going to disconnect my network printer Canon?   My iMac running the same OS version don't unplug and behaves like any normal wireless connection.  I deleted the printer and added back, reset printing, etc. nothing works.  Given that the Mac is 6 "each other and 5 feet of printer during the last test, it must be something specific to the Macbook.  The Macbook identifies the printer after each reboot the printer as printer Canon right, but once the task is completed does not have the printer.  Everything is on the same wireless network. Computer Windows also recognizes the printer and it keeps alive after printing.

    Please read this message before doing anything.

    This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

    The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

    Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

    Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

    Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

    The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

    Test in safe mode. Same problem?

    After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

  • OfficeJet Pro 8500 a Fax Copier Scanner has streaks dark on most of the page but exit the printer seems

    HP OfficeJet Pro 8500
    Series # {information}

    CM755A model

    The printer prints using the printer and the output looks fine. However, when you use scan, copy or fax characteristic of the printer, there is gray stripes dark page that covers almost the entire page. Have tried resetting, cleaning all areas and still have the problem. What is the problem? Is there a diagnosis of the printer that I could run? No error code will appear. Any guidance is appreciated - thank you!

    Looking at your attachment, the unit seems to have a bad scanner and must be replaced. If your in the United States, contact the HP support @ 1800-474-6836 to see what alternative options are available

  • printer Lexmark Pro 200. Does not print the correct colors. I restarted my computer and the printer is off but get the same result.

    Printer Lexmark Pro 200.  Does not print the correct colors. I restarted my computer and the printer is off but get the same result.

    Hello

    • What were the changes made before the problem occurred?

    You try to run this fix and check.

    http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

    If above does not work, try contacting Lexmark support for assistance.

    http://www1.Lexmark.com/en_US/global-services/customer-support-services/index.shtml

  • HOW can I FIND THE CARTRIDGES ARE EMPTY AND that it FAULT REPLACE HP printer fax C309 using windows 7

    HOW can I FIND THE CARTRIDGES ARE EMPTY AND that it FAULT REPLACE HP printer fax C309 using windows 7

    Hello

    Please use one of the following methods:

    http://support.HP.com/us-en/document/c00257147

    Kind regards.

  • I lost my Windows Vista installation disc, but retain the product code, where can I get a replacement disk?

    It has been a while since I have Vista and I had it installed on pc crashed, so now I need to reinstall Windows on it. I still have the product key, but I lost the installation disk and I wonder where I could get a replacement drive.

    It has been a while since I have Vista and I had it installed on pc crashed, so now I need to reinstall Windows on it. I still have the product key, but I lost the installation disk and I wonder where I could get a replacement drive.

    Call the manufacturer of your computer.

    1. ask a set of recovery disks. The cost is minimal and it is money well spent.
    2. at the same time, ask to speak to a technician. Ask the person to teach you how to access the recovery of the computer partition and how to use it to restore your computer.

    None of the foregoing need by using your product key.

  • I try to get my printer to print a document, it goes through the indices of normal routine but in the end, it shows the number of the DOCUMENT to print.

    Whenever I try to access my printer to print a document, it goes through the indices of normal routine but in the end, it shows the number of the DOCUMENT to print.

    Original title: printer

    What kind of printer do you use? You use the latest drivers on the manufacturers website? Where are you seeing the printing error DOCUMENT No.?

  • My hard drive on my IMac has only been replaced and now when I log in Lightroom it asks the serial number. I bought LR3 years and upgraded to 4 via the web. I have original in my LR3 product code number but not the serial number for my LR4. How can I

    My hard drive on my IMac has only been replaced and now when I log in Lightroom it asks the serial number. I bought LR3 years and upgraded to 4 via the web. I have original in my LR3 product code number but not the serial number for my LR4. How can I get that?

    If you have purchased lr4 where registered with adobe, consult your Adobe ID account - using the same adobe id for purchase / register.

  • Trying to save the contact created in PDF but sheets the printer dropdown didn't.  Why?  I bought Lightroom and my computer has Adobe Reader... What's the problem?  I bought this software because it was necessary and assignme

    Trying to save the contact created in PDF but sheets the printer dropdown didn't.  Why?  I bought Lightroom and my computer has Adobe Reader... What's the problem?  I bought this software because it was necessary and assignments must be sent in PDF format.  Suggestions would be appreciated.

    In the page layout, you can change the printer to a single Note and then click Print. A note, you can use:

    File > save as > PDF > save

    You can then display in Adobe Reader

  • 7780 all in one print via bluetooth from a PC Windows 7, but not the other

    • Our HP 7780 all in one printer is connected to the network via bluetooth and has an ip address of http://192.168.1.65. A Mac and a Windows 7 desktop computer can print on it. An another Windows 7 laptop USED to be able to print, but no longer can, although it can browse to it and see the ink levels.
    • After restarting, the printer status says ready and a new print job appears in the queue, but after a bit it turns into error and never print.
    • We downloaded the base driver and reinstalled. During the installation of the 7780 was on the list of discovered printers and we chose, but during the installation, we got an error message that it could not find the printer.
    • Later we downloaded and installed the patch titled that product stops printing after network installed on Windows 7 (64 bit), rebooted and still the same error.
    • Help! How to be able to print the new Windows 7 laptop!

    The problem was McAfee firewall. First I disabled it, and print worked. Then I restored the default settings of the firewall and print continued to work.

  • I took my mac repair, they ended up replacing my computer, I got the package of cloud of Photoshop and Lightroom but logging into my account I do not see where to download it again? I still pay every month I just need the programs...

    I took my mac repair, they ended up replacing my computer, I got the package of cloud of Photoshop and Lightroom but logging into my account I do not see where to download it again? I still pay every month I just need the programs...

    Click on the link below and download Creative Cloud Installer file and use them to install the creative Cloud Desktop application.

    https://ccmdls.Adobe.com/AdobeProducts/KCCC/1/OSX10/CreativeCloudInstaller.dmg

    Once you have installed Adobe Creative Cloud app, you can reinstall all applications CC:

    Reference:

    https://helpx.Adobe.com/creative-cloud/help/download-install-app.html

  • Wizard BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

    How is it assistant BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

    This has two questions:

    1 capacity of SSDS faster for Fusion drive has been reduced. Therefore less effective for the reader of the merger. For example if I need to create a partition of 80G for my windows bootcamp partition, only 48 G will be left in the drive of the merger.

    2. ability of the bootcamp windows partition becomes very limited, cannot be greater than 120 G.

    3. even when I try to fuse out of the drive of fusion in the 128 G SSD and 3 TB of HARD disk, and then run the BootCamp assistant to create the bootcamp partition start from scratch to reinstall El Capitan only on the HARD drive (without drive Fusion), it won't let me do anything, it just shows an error that says something like "a person has created additional partitions on this drive please select. another disc. But there is nothing else to choose.

    Before my (5 K, 27 inches, end of 2014 retina) to El Capitan Yosemite, I was able to use the previous version of the wizard BootCamp 5.x to create the partition, bootcamp on the drive of the merger. And it will be divided in the fuser unit in two and insert the Bootcamp partition (with the size I chose, which can go up to 1 TB) between two partitions of MAC OSX.

    The disk partitions resulting from it, will be the partition MAC OS x on the SSD, the partition MAC OS x on the HARD drive partition #1, partition MAC OS x on the HARD drive partition #3.

    Then there is the BootCamp partition on the HARD drive partition #2.

    Is there a way to get what I need?

    That is what has been described in this notice of two canoes?

    Installation of Windows on a Boot Camp partition on a drive of TB Fusion 3

    n-on-a-3-TB-fusion-drive http://twocanoes.com/Winclone/support/installing-Windows-on-a-Boot-Camp-partitio

    Thank you.

    After having worked on those weeks, I realized that I need very painfully (by first going back to Yosemite and bootcamp 5 to escape all the limitations of El Capitan and BootCamp 6) I want to share here. Someone at - it other smarter solutions welcome.

    Note these steps and mentioned drivers only work for my version of iMAC, retina 5K late 2014. If you have other material, please search on the web to see which driver will work first. And all of these steps are destructive and assumed that you first take backup. It is only shared for interest only. Readers will have to bear your own risk.

    A. take backup

    1. take a backup completes my iMac Fusion Drive using Time Machine. Then restart with a Yosemite USB installation and select Terminal from the menu on the top bar.

    B. fuse out of the merger in two physical disks drive: SSD + HDD

    1. in the terminal, type the commands in show what the logical volume group ID and the ID of the logical Volume of the disc fusion)

    Cs diskutil list

    2. in the terminal, type commands for the fuse of the fuser unit and separate them to an SSD and a HARD drive.  Note: All data will be destroyed in the drive of the merger. There are many articles in this community on how this could be done,

    diskutil cs deleteVolume Logical Volume ID

    CS diskutil remove logical Volume Group ID

    This should finish within 30 minutes. If you have taken more time, this means that your reader of fusion has been altered somehow.

    I hit this issue too.  To use this command to remove the fusion drive hung up, and I need to do the hard to scramble a few sections of data in the hard disk partition table using the controls to tell the OSX this hard drive is a new without partitions:

    Cat >/dev/random /dev/disk0 (where/dev/disk0 is the SSD)

    and repeat for disk1/dev/disk1 which is the HARD drive in my case).

    This command will not return anything, but expect to press Ctrl-Z to end after 1 minute.

    2 create independent partitions (non-fusionend) for the installation of OSX.

    Borne Terminal output, and select disk utility, in disk utility, select the drive to HARD disk (and not on the partition), you will see the error message and you will be asked if you want to fix the fuser unit, click on ignore. Then wipe the HARD drive to create a single 'extended OSX journaled"named"HARD drive".

    3. Repeat step 2, and then erase the SSD drive to create a single 'extended OSX journaled"named"SSD ".

    C. install on the HARD disk as drive didier autonomous not fusion.

    1. go to Yosemite install screen and proceed with the installation of a clean copy of Yosemite to the iMAC. then connect you.

    D. use BootCamp Yosemite f5 to install windows.

    1. launch Yosemite bootcamp.

    2. check the two checkboxes for creating the USB drive to install windows 7 or a later version, and to download the windows supports the Apple software.  Do not click on the last box to install or remove windows pie creating real bootcamp partition again.

    3. it may take several hours to complete this function of your internet b/w and also performance of your USB drive.

    4. If you install Windows 7 (like me), then the downloaded drivers will not work for you, this will cause the issue of the device driver appleDSS.sys does not like this driver and others are too recent for windows 7 to use.  Also, your keyboard and mouse may not work even if you try to plug in a USB external keyboard or a mouse. You need to replace the drivers downloaded by others (the Boot Camp 5.1.5769 drivers that I find in this link: Software Support of Boot Camp 5.1.5769.) (Note: this driver is material specific only works for my iMAC model).  Once you have downloaded it, copy the two files in the root directory of the USB installation to replace the original ones. It's specific and material available for download somewhere on the Apple Site.

    -From the Finder, delete the $WinPE$ and the Boot Camp of the FLASH PLAYER files.

    -Expand the old drivers for Boot Camp 5.1.5769 (two records and another file) on your desktop.

    -Copy the $WinPE$ and records of Boot Camp in the FLASH PLAYER.

    5. open Boot Camp Assistant again and only select the third option, install Windows 7.

    It will show you the screen to select what installation disk, select HARD drive.

    Then drag the slide bar to select the size of the Bootcamp partition for windows you want, knowing that there is a restriction for windows installed using training camp on a MAC that the last byte of the BootCamp partition must reside in the first byte of the 2.2 T of each physical hard drive.

    For my case, I need only 500G for bootcamp and leaving behind 1.7 to for my MAC OSX partition immediately after the bootcamp partition and an another 0.8 T MAC OSX partition after him. 1.7 TB and the partition of MAC OS x 0.8 TB well exploited in the meantime bootcamp partition, will be merged into a fusion drive by Bootcamp. Thus, you will end up with total 2.5 TB of disk space in a logical drive - fuser.

    Go to this link for more details on this subject: n-on-a-3-tb-fusion-drive http://twocanoes.com/winclone/support/installing-windows-on-a-boot-camp-partitio

    6. continue the process to partition the hard drive, then it will restart automatically in windows installation mode, install windows.

    7. once the installation is complete, check that windows is functioning correctly.

    E. Si you want to upgrade to windows 10 Windows 7.

    1 if you plan to upgrade to windows 10, you'll find that the windows IE v.8 7 is no longer works and had many problems to load the page.  Then when you try to download the latest version of Internet Explorer, you get an error that you need at least windows 7 SP1 to support the last IE.  Life is too complicated, just download the google Chrome browser, then search for download windows 10 and then run the Microsoft valuation tool to upgrade.

    2 but before upgrade you, unplug all your MAC USB drives, otherwise, you will find that, after having spent an hour downloading the windows 10 software, the upgrade will fail with the error "/ dynamicupdate...» ». It is an inexplicable mistake that no one seems to understand why. There are articles with proven results that the removal of all USB drives before running the windows 10 upgrade tool will correct this problem.

    F. reinstall OSX El Capitan

    Once your target windows system (if windows 7, windows 8 or windows 10) works very well.  You can continue to create again your Fusion drive and reinstall OSX El Capitan.

    1. Insert the install of OSX Yosemite rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

    2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

    3. on the selection screen, select start Yosemite OSX install drive.

    4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

    5. in the terminal, type the command 'diskutil list cs' and you should see nothing to prove that there are no existing fusion drive yet.

    6 type the 'diskutil list' command to list all disks and partitions.

    The SSD has two partitions, the/dev/disk0s1 of EFI (209 MB) partition and the other/dev/disk0s2 of OSX partition we created in step B above, called SSD around 121 G.

    The HARD drive has two partitions, the/dev/disk1s1 of EFI (209 MB) partition and the other/dev/disk1s2 of OSX partition we created in step B above, called SSD.

    G. delete the logical storage of nucleus on the HARD disk drive and it refuses with the DSS to form a merger with faster performance disc

    1. Insert the install of OSX El Capitan rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

    2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

    3. on the selection screen, select start Yosemite OSX install drive.

    4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

    5. in the terminal, type orders for (to show what are the logical volume group ID and the ID of the logical Volume of the logical drive). You should see the logical volume to basic storage group created using two partitions on the hard drive, 1.7 TB and TB 0.8 created when we run the Yosemite Bootcamp to install windows.

    Cs diskutil list

    6. in the terminal, type commands to delete logical drives from basic storage.  Note: All data will be destroyed in the logical drive.

    diskutil cs deleteVolume Logical Volume ID

    CS diskutil remove logical Volume Group ID

    7. tap "diskutil list" command lists all the resulting partitions. You should see that the HARD drive has the following partitions.

    / dev/disk0 (internal, physical):

    #: NAME SIZE TYPE IDENTIFIER

    0: GUID_partition_scheme * GB 121,3 disk0

    1: disk0s1 EFI EFI 209.7 MB

    2: Apple_HFS GB SSD 121.0 disk0s2

    / dev/disk1 (internal, physical):

    #: NAME SIZE TYPE IDENTIFIER

    0: GUID_partition_scheme * 3.0 to disk1

    1: EFI EFI 209.7 MB disk1s1

    2: Apple_HFS 1.7 Untitled TB disk1s2

    3: disk1s3 Apple_Boot Recovery 650.0 MB HD

    4: Microsoft database BOOTCAMP 503.0 GB disk1s4

    5: Apple_HFS 801,4 Untitled GB disk1s5

    8 type the following commands to create the logical volumes group, named "myLVG" (or the name) of fuser using the usable for OSX to the SSD and HDD partitions.

    diskutil cs to create "myLVG" disk0s2 disk1s2 disk1s5

    Note: Mark the group id of logical volume shown in the results.

    In my case, I want to book the last partition as standalone partition disk1s5 no-fusionend, so I can use it to raise the back, or format it in FAT32 to allow the exchange of data between the MAC and boot camp.

    So, I do not understand this last partition in the drive of the merger. in my case, the command that I used is: diskutil cs to create "myLVG" disk0s2 disk1s2

    9 create logical volumes named "Macintosh HD" (or you call it) on the logical volume group we just created for the reader of the merger.

    diskutil createvolume logical volume group ID jhfs cs + 'Macintosh HD' 100%

    10 command "diskutil cs type list" to check the resulting fusion drive created.

    CoreStorage groups of logical volumes (1 found)

    |

    + Logical Volume - Group F53C7A25-C2F3-4997-91E9-2E6B6BAB2E0E

    =========================================================

    Name: LVG

    Status: online

    Dimensions: 1815635525632 B (1.8 to)

    Free space: 90112 B (90.1 KB)

    |

    +-Physical volume E176873C-7C80-4759-8110-BA7307E0C4B3

    |   ----------------------------------------------------

    |   Index: 0

    |   Disc: disk0s2

    |   Status: online

    |   Dimensions: 120988852224 B (121.0 GB)

    |

    +-Physical volume 6535AC3C-DCF8-453F-AD47-98905538386E

    |   ----------------------------------------------------

    |   Index: 1

    |   Disc: disk1s2

    |   Status: online

    |   Dimensions: 1694646673408 B (1.7 to)

    |

    +--> Logical volume family F3D15F87-FB84-4B43-B2F2-E9EACC7C42D9

    ----------------------------------------------------------

    Encryption type: no

    |

    +--> Logical volume 0D807F6E-FB7C-418F-AAF4-EF3EA3525D10

    ---------------------------------------------------

    Disc: disk2

    Status: online

    Size (Total): 1809780178944 B (1.8 to)

    Reversible: no

    Name: Macintosh HD

    Volume name: Macintosh HD

    Content indicator: Apple_HFS

    LVG Type: Fusion, sparse

    11 exit the terminal, go back to OSX El Capitan install screen and select the name of the fuser unit 'Macintosh HD' proceed to begin the installation of the os x for installation.

    12. There will be a step in the installation ask you if you want to configure as a new computer, or restore from a time machine previous backup. Make your own choices it accordingly.

    13 once OSX El Capitan has been installed and you have finished restoring the data and custom configurations, you can enter the application of preferences to check if you see the icon of the "Startup" disk", and if you choose Startup BootCamp in the next reboot, you should be able to boot up to Windows without pressing and holding the button option when reboot and choose to start windows manually. Also, in windows, you should be able to click on the bootcamp Control Panel and select for a startup to OSX on the next reboot.

    14. one thing to be aware, if you install bootcamp in this way, the boot camp and the GUI utility disk in OSX El Capitan will not be able to adjust your settings. This means, if you need to touch anything or to readjust the size of the partition, you will need to do it again in step A. Alternatively, some how to get started with installing Mac OSX Yosemite USB, then adjust the partitions using similar commands shown in this article or other articles in this community.

    15. yet once please take personal responsibility on damage if you follow the instructions in this article.

Maybe you are looking for


HashFlare