I replaced the router and I need to re - connect wirelessly. How do I do that?

I have a HP Deskjet 3050 j610a series. I replaced my router and now do not know to re-establish the wireless connection. I looked at the page Hp wireless and their solution is to put the driver cd of back in a welcome back screen appears and you can reconfigure the wireless settings form. Unfortunately, there is no such pop on my computer screen. Does anyone have any suggestions? Is it as simple as uninstalling and reinstalling the software? I'm on a Mac by the way.

Thank you!

Just to be safe, use the uninstall program in the HP folder in Applications.  Restart, and then load the hp.com HP software.

Unplug the USB cable before installing the software, choose the type of installation 'Network' or 'Wireless '.

Tags: HP Printers

Similar Questions

  • blue screen after replacing the battery and charger / need of Windows XP Pro disc

    Hi all.

    I bought a used laptop from gateway with Windows XP Professional already on it. The person I got it never gave me the disc of Windows or textbooks and it is out of warranty. I had to replace the battery and the charger after 3 months of use, and it now gives me the blue screen.  I can't enter in safe mode, it gives me just all sorts of codes for Win32 /? (different things). SYS. The blue screen also tells me if this keeps continues to go to F8(Advanced Options), and then choose the option. I called my local tech and he said contact Windows to get a disk to fix the problem. How can I do (I'm not a comp WIZ). So I try here to get any help. I am on a borrowed laptop so if you can help, please send me a personal email to * address email is removed from the privacy *. I get their

    After reading the owner's manual for the NX260X (Chpt. 7, p. 72-74) I am convinced that the laptop, as previously indicated above by PML, is originally came with Windows Vista.
    http://support.gateway.com/s/manuals/mobile/8511886.PDF

    In addition, according to the instructions of the manual recovery (pg.74, means only available recovery Windows are re - install using the supplied DVD.) This is meaningless given that bridge claims the recovery partition was part of laptop computers sold after November 2004.  I agree that, if you decide not to try to fix the errors, you should consider Windows 7.

    However, personally, I would try to fix the mistakes here before you spend a minimum of $100.00 for Windows 7. We usually have a pretty good success rate when the OP stays with the subject.

  • I got a new modem and the router and now I can't print wireless.

    I have a Photosmart 8450 printer.  My operating system is Windows7.  I tried to follow the Scan doctor, but I guess I'm not tech savy enough to understand.  It worked fine before the new modem and the router.  She is 'offline' and I can't understand how to put line.  Thanks for any help and easy enough for me to follow.

    Hello raedene715.

    Thanks for the transcript, it was useful.

    Please, check the network cables and connections (side of the printer and router). If possible, try a different network cable.

    See you soon!

  • I have been connected to the internet (wireless), then I unplugged the router and now I can not connect to internet. I tried diagnose the problem, but he said that he could not.

    I have a wireless internet connection for my laptop. I was connected to the internet, and it worked very well, so I had to unplug my router and all of a sudden I can't connect to the internet more. When I open the available networks, I hit connect on mine and he said: it does not work then I hit "diagnose the problem" and then, he says he can't. Also it is not even give me the option to set my password to connect to my network, but it does when I try to connect to any other.

    I suggest to unplug all your network cables and unplug the adapter from your modem AND router. ONLY plug your modem back power adapter in. Wait until you get a steady green light on your router, which indicates that it is ready. Then, connect the ethernet cable from your modem to your router INTERNET port. Connect the ethernet cable from your computer to any other ETHERNET port on your router. Finally turn the monitor for your router.

    If you do not do so in this order, the router can not connect properly to the internet because it doesn't have the correct IP address of your modem.

  • I have 3 domains. A field is a constant date mm/dd/yy. The second field is a digital number (1-120) and can be changed. The third field calculates two fields 1 and 2 in the summation and shown in mm/dd/yy. How do I calculate that in the script?

    How do I calculate that in the script? I have 3 domains. A field is a constant date mm/dd/yy. The second field is a digital number (1-120) and can be changed. The third field calculates two fields 1 and 2 in the summation and shown in mm/dd/yy.

    You searched for ' add days?

    You must write a custom for this JavaScript calculation because you cannot add a number any date. Also the date strings are not just a number, even if we can convert a given date in a number for that date that represents the time form a date date (Epoch). Witn this value, we can achieve them all kinds of date calculations and collect a little information about the date. JavaScirpt uses midnight on January 1, 1970 UTC for starting point or the date of the time. Its value is zero, and every millisecond increases the value of 1. When a date string is converted to the date object JavaScirpt we have access to many properties of the date and can use several methods to extract information or adjust the date object.

    Field 1 is in the format "Date" with a format of "mm/dd/yy".

    Field 2 is in «Number» format with 0 decimal.

    Zone 3 is in the format 'None '. The custom calculation script applies to the formatting.

    The custom for JavaScript calculation area 3:

    var cField1 = this.getField("Field_1").valueAsString;

    var cField2 = this.getField("Field_2").valueAsString;

    Event.Value = "";

    If (cField1! = "" & cField2!) = "") {}

    Console.println (cField1 + "" + cField2);

    calculate that if we as no null data;

    var cDateFormat = "mm/dd/yy";

    convert start date date object.

    Kai var = util.scand (cDateFormat, cField1);

    get the date of the month;

    David var = oDate.getDate ();

    Add field 2 number of days;

    David = Number (nDate) + Number (cField2);

    of being updated for the new date.

    oDate.setDate (nDate);

    Set the field to update formatting;

    Event.Value = util.printd (cDateFormat, letter);

    } / / end of data not null;

  • I had a change in router and now I can not connect wireless network printer

    HP Deskjet 3050 has

    Windows 7

    I got a router change and now can not conect my printer on the wireless network. What should I do?

    Hi MaggieS, this support document provides suggestions for the correction of a reliable wireless connection. Try to work through them in the order of presentation and do not hesitate to post back if you are still not able to get connected http://support.hp.com/us-en/document/c02817031

    All the best.

  • Question about the replacement of router and new network location. Is this normal?

    Yesterday, I replaced my router with a another router of the exact same brand, model, and firmware version. The only thing that has changed as far as the router will have the MAC address.

    In any case, after that I swapped the router and plugged the network cable, I could use Internet all day very well. This morning when I turned on the computer, introduced me to all of a sudden with the Wizard "Set network location", and Windows has created a new situation "network 2". Everything always seem to work well.

    I want to just make sure that it is the expected, normal Windows 7 behavior after changing a router. I'm just a little paranoid because the network location Wizard pops up only the next day, I replaced the router, and not immediately after I plugged in the cable.

    Thank you!

    Yes. It's normal.  The delay in the command prompt is a little unusual, but I've seen this before.

  • Unable to connect to the Internet via the router and Modem

    I've recently updated my version of office xp to windows 7. I have a D-link router and a modem with an ISP, and they are all correct, the son. I tried to install the router, but it cannot detect an ethernet cable, even if everything is good. I shot all three offshore, the computer, the modem and router for 60 seconds, reset the router and tried to configure a connection through windows, but nothing seems to work. I have a laptop that can capture the wireless signal and connect to the internet through this. But it's the computer that cannot find the modem or router and does not connect to the internet, I am lost on what to do.

    If your laptop is connected through the router (wireless), then your router is
    more or less OK.
     
    Go to Control Panel/network connections.
    If your PC has both wireless and LAN cards, turn off your PC wireless
    network, here's how:
     
    Right-click on the icon of your PC's wireless network connection. Select Disable. Wait
    until the end of this process.
    Then, right click on icon to connect to the LAN of your PC. Select Disable. Wait
    until the end of this process.
    Now right click on icon to connect to the LAN of your PC. Select Enable. Wait
    until the end of this process.
     
    Open a command window (cmd.exe). We will see if there is a LAN connection. On
    the command line type:
     
    Ping 67.195.160.76
     
    then 'Enter '. What answer did you (paste here). If you receive the answer
    pings, enter this next...
     
    Ping www.yahoo.com
     
    then 'Enter '. What answer did you (paste here). If you receive the answer
    pings, open your browser and go to www.yahoo.com. What is going on?
     
    Other things to check...
    You have DHCP enabled in your router configuration (preferred answer: Yes)
    Set the maximum number of DHCP users to 10 or more (you can reduce that
    later if you prefer).
    Is set to "obtain an IP address automatically" the IP address of your PC
    (preference response: Yes, unless you know what you are doing) or is it
    already a value in place.
     
    "staz2020" wrote in message news: a707c004-e504-4f14-b1d4-2bc465c15eb3...
    > I have recently updated my version of office xp to windows 7. I have a
    > D-link router and have a modem with an ISP, and they are all correct, the
    > son. I tried to install the router, but it cannot detect an ethernet
    > cable, even if everything is good. I have disabled all three, the
    > computer, modem router for 60 seconds, reset the router and tried
    > establishing a connection through windows, but nothing seems to work.
    > I have a laptop that can capture the wireless signal and connect to the
    > internet through this. But it's the computer that cannot find the router or
    > modem and does not connect to the internet, I am lost on what to do.
    >
     
     
  • I need to replace the battery and AC adapter of the Satellite Pro U400-160

    I have a Satellite Pro U400-160.

    I need to replace the battery and the charger of my Toshiba, but I am wary about compatibility issues.

    Any battery for Satellite Pro U400 is suitable for mine?
    As I can't find which batteries are specifically suitable for my computer.

    (For example: is this a: http://www.amazon.es/Bater%C3%ADa-Toshiba-Satellite-U400-11V-7800mAh/dp/B0051A9Y88/ref=sr_1_cc_2?s=aps&ie=UTF8&qid=1366885340&sr=1-2-catcorr&keywords=satellite+pro+u400?)

    Is there a quick way to check if a battery / charger are compatible?

    Each battery and adapter you get from Toshiba has specific part number. All you have to do is use this same part number and order. You should be able to find on the internet.
    You can also get compatible parts you are ordering by the Toshiba authorized service provider in your country.

    By the way: all U400 models have the same construction and the similar specifications then all the batteries specified for U400 can be used on your U400-160.

  • I have just replaced my computer and now need to reinstall Dreamweaver. I can't for the life of me find anywhere on the Adobe site to download again. Should what steps I take to download and reinstall the software I pay for every month?

    I have just replaced my computer and now need to reinstall Dreamweaver. I can't for the life of me find anywhere on the Adobe site to download again. Should what steps I take to download and reinstall the software I pay for every month?

    Download/install the desktop application, connect and install applications subscription.

    Creative cloud to desktop
    https://helpx.Adobe.com/creative-cloud/help/creative-cloud-desktop.html

    Sign out, sign in | Creative office cloud app
    http://helpx.Adobe.com/creative-cloud/KB/sign-in-out-creative-cloud-desktop-app.html

    Help of activation & deactivation
    https://helpx.Adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html#a ctivate-how-to's

    Install, update, or uninstall applications
    http://helpx.Adobe.com/creative-cloud/help/install-apps.html

    Install creative Cloud applications
    http://TV.Adobe.com/watch/CS6-creative-cloud-feature-tour-for-video/installing-desktop-app s-of-creative-cloud.

  • Can I replace the memory and not lose what is on the old memory for a Mid 2007 Mack computer desktop Intel Core 2 Duo, 2 GHz processor speed, 1 CPU, 4 MB of Cache L1, the 4 GB memory at 800 MHz bus speed.  Only 1 slot can play memory, the other is damaged

    Can I replace the memory and not to lose what's on the memory of the former?  I have a Mid 2007, 20 "desktop Mac, Intel Core 2 Duo, 2 GHz processor, 1 CPU, 4 MB L2 cache, 4 GB of memory, 800 MHz bus speed.  I have a backup device.  A RAM slot is damaged.

    You are confused of RAM and disk space available.

    RAM stores information temporarily while the Mac is enabled and the application is reached. RAM replacement has no effect on the long term of your information storage.

    The hard drive is where your information is stored in the long term. If you replace your hard drive, you need restore the information from a backup.

    FYI, for your iMac, the maximum RAM is only 6 GB.

  • The Routing and remote access could not start, error 214500037 (0x80004005)

    My windows server 2003 r2, failed to start the Routing and remote access services. And in the event an observer log, it has error code
    Event ID: 7024, with service specific error 2147500037 (0x80004005)
    I tried to reset tcp/ip and replace ias.mdb and dnary.mdb by a new, but it did not work.

    Thank you

    Hi budhihartono,

    Since you are facing problems with windows server 2003 r2, it would be better suited in the Technet Windows forum. Please post your question in the following TechNet Windows server forum to improve assistance:

    http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  • Compaq Presario CQ56: Try to replace the fan, do I need radiator?

    Hello. I am trying to replace my fan it starts to go.

    I need to replace the fan AND the heat sink (they appaear to be attached to another)? Is it possible I could buy just the fan itself, simply remove the old fan heatsink and then attach it to a new fan? Or would remove the damaged radiator? If I can remove it and reattach to another fan how what to do?

    The manual shows the part number is 606573-001, but I can't seem to find where to buy with a heat sink in any case. I find only individual fans and it seems not can I buy it separately the radiator. Where my question.

    Thank you.

    Usually, the fan is held in place with a few screws. Simply remove, remove the fan and replace it with the new fan.

  • My speed has decreased between the router and the modem is not working properly, what can I do to increase the download speed with my Time Capsule 802.11n

    My speed has decreased between the router and the modem is not working properly, what can I do to increase the download speed with my Time Capsule 802.11n

    A variety of phenomena can affect the performance of its wireless network. You may be able to mitigate some negative effects.

    Solutions to any factors that may have an impact on your wireless network, read use the Diagnostics wireless for you help to solve the problems of Wi-Fi on your Mac - Apple Support.

  • Why apple card app does not show the routes and directions between two places in India in an iphone 6 s more?

    map does not show the routes and directions

    This feature is not yet supported in India.

    http://www.Apple.com/in/iOS/feature-availability/#maps-directions

    In addition, your phone may be overheating for a number of reasons. The most common of which is low service area.

    Your attributes from battery to the majority of the production of heat, then adjust settings to put less load on the farm in general will help some.

    http://www.Apple.com/batteries/maximizing-performance/#iOS

Maybe you are looking for

  • Toshiba DVD player is not working properly because Windows 7 upgrade

    I have recently upgraded to Windows 7 and can't get my reader DVD Toshiba to work.I tried to update drivers, uninstalling and reinstalling. Also, I tried to download a Realtek driver for Vista for a suggestion on another thread and that was even wors

  • Y410p missing Nvidia graphics options & microsoft base adapter problem display after Win8 re - install

    The title pretty much sums this up, but I will here is more in depth history: I downloaded a program for PC tune-up of AVG (I had used them before anti-virus without problem) and when I ran, my computer took forever to drive reapair (> 4hrs) and he g

  • How to hide the context menu of a graph?

    Hi all I am wondering how or if I could hide the context menu for a table or chart? On the attached screenshot menu I want to hide. Or is there another possibility to let the user, just edit the balance there and NOT let it activate autoscale?

  • I need help to remove duplicate files

    I have MANY files duplicate on my, new to me, the laptop. Including but not limited to photos and lower costs.  I would like to delete all the duplicate files and other unnecessary junk files and I could use some (a lot) of help. I'm not that effecti

  • HP Mini 210 upgrading to an SSD?

    Hi all! I just got a used HP mini 210 and want to assign! but not as much as I like a computer with the speed. So I have plans to install a hard drive SSD from intel in it. I want to know if it is possible to install a new hard drive, set the windows