I restored my files Carbonite - or thought I did - but they can't are not there - I thought I found the right file - please help! The steps did not work!

Similar Questions

• Recently, I ran an anti-virus and learned that my netBT.sys file was corrupted. The anti-virus software installs this file but now my internet does not work.

  netBT.sys replacement files viruses

  Recently, I ran an anti-virus and learned that my netBT.sys file was corrupted.  The anti-virus software installs this file but now my internet does not work.  I guess I have to replace this file, but don't know how.  I see that I need to use my windows XP CD but my CD drive is broken.  How can I go about replacing this file?

  Thanks in advance

  Hi DonMendigo,

  Follow the suggestions below for a possible solution:

  Method 1: Try the SFC (System File Checker) scan on the computer.

  To run the System File Checker tool, follow these steps:

  a. click Startand type cmd in the box start the search.

  b. right click on cmd in the list programs, and then click run as administrator.

  c. If you are prompted for an administrator password or a confirmation, type your password or click on continue

  d. at the command prompts, the following line and press ENTER:

  sfc/scannow

  See also:

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

   

  File system (CFS) Checker

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/system_file_checker.mspx?mfr=true

   

  Method 2: If you are still unable to connect to the internet, then follow the article in the Microsoft Knowledge Base and check.

  Programs Internet in Windows XP cannot connect to the Internet via a connection to wide band

  http://support.Microsoft.com/kb/307164

   

  I hope this helps.

• I recently did a factory reset on my computer and saved all my files on a flash drive when I load them onto my computer, they look all as internet files explore instead of dreamweaver files, please, help?

  I recently did a factory reset on my computer and saved all my files on a flash drive when I load them onto my computer, they look all as internet files explore instead of dreamweaver files, please, help?

  They probably had the IE icon because Windows automatically associate with IE html files.

  It is of no consequence for your work in Dreamweaver, but you can change this association if you wish.

  Go to control panel > default of programs > set Associations.

• I uninstalled firefox and download a new thought my favorites saved as json but I just saw on the file is says DO not json or html FILE please help

  I've saved my favorites before uninstalling Firefox and reinstall tried to restore my favorites, it says file unsupported after checking type everything said json so I thought it was the json file, then I just saw on my bookmarks file that isn't Google the JSON or html so how do I restore a bookmarks file that is a FILE run Firefox 27.0.1 x 86 we windows 8

  You must add a tiny .json: bookmarks-2014-02 - 15.json

• BlackBerry smartphone how to open BBM bak. file Please HELP!

  Help, please!

  I have a BB Bold 9900 and must open my backup files in urgent BBM!

  I can easily open the file history through Excel on my laptop, but I can't open the backup files, and it is these conversations that I need.

  The files appear like this for example...

  for example. BBM-(12-08-31-10-53).bak

  I also need to open the history files stored in Whatsapp, once again, I can't open these files.

  Any suggestion would be appreciated..!  Thank you!

  Hi pellosmith and welcome to the community of BlackBerry Support Forums!

  BBM and BlackBerry smartphone backup cannot be opened and read on your computer. These files are intended only to restore the BlackBerry smartphone or the application itself.

  Thank you.

• All my icons are LNK files please help I am panic

  Basically, I recommended windows open a folder with a lnk file but when I made all my icons have been transformed into office lnk files and I couldn't open any of them please help I tried in safe mode, but the files are still the same

  This file association is more easily solved by using the system restore to roll back in time to before the beginning of the question.  There are some registry changes to correct, but I highly recommend the system restore instead.  You can open it by searching the restore in your Start menu.

  If it was useful, you can vote by clicking on the green triangle. If it solves the problem, click on propose as answer. Thank you!

• iCloud drive does not display files or photos. I need to my iBook in the cloud drive files, please help.

  iCloud drive shows the storage used on the files of the iBook and pica, but I can't access via iCloud Drive. Why is this? How can I solve this problem?

  on icloud drive, I have only two files that I saved from my e-mail, but I want to iCloud Drive to synchronize my files to the iBook.

  Anyone?

• equation of columns of values in the text file, please help

  I applied an equation to the to column values in a text file, thr is two columns; for every 10 values, I should get an output value, so a total of 5 values + 5 values for each of the two columns with values from 50.

  My vi don't wrk properly, the values are not justifiable, and I get only 5 values instead of 10 (5 for each of the 2 columns with 50 values)

  I have attached hv my vi, pls help.

  Of course, find NaN in there.  You are divided by 0.  Tip: The top 10 items are all 0.

• CC 2015 not open in photoshop with Camera Raw CR2 raw files, please help?

  It works very well so far.
  I have a mac OSX 10.8.5, photoshop is installed and up-to-date - CC (2014). I own a 700 d camera Canon. I have not recently updated the operating system of my computer, photoshop and camera raw have been working well since creative cloud last updated - a month ago?
  When I try to open a raw file (open with > adobe photoshop)
  

  I get this error message
  

  I had this also when I tried to go file > open recent > IMG_138.CR2. So I went to photoshop > Preferences > camera raw... to see what was going on and I got a different error message

  I had this same error message when I tried to look in photoshop > about plug-in > camera raw.
  Camera Raw works not in Photoshop Elements.
  

  But this makes no sense because I can open raw files yesterday, everything worked fine. In Photoshop Elements, I went to Photoshop Elements > about plug-in > Camera Raw, but all I get is the following:
  

  When I click it, it disappears. When I go to photoshop elements > Preferences > plugins, camera raw does not appear:
  

  
  Photoshop Elements open digital, negatives, but Photoshop won't and I get the same dialogue "cannot recognize the file type. I doubt that using a digital negative converter / raw file will change that. I need camera raw to work in photoshop.

  I restarted my computer, when I uninstalled and reinstalled photoshop does not solve, but again, I got the same answer.

  
  My computer must have a certain amount of available storage space for camera raw to run? The only thing that has changed on my computer since I was last able to open files in photoshop raw is the amount of space on my computer - since the importation of raw files from my camera using image capture I have only 32,37 GB left on my computer (raw files take up a lot of space!). I made were not all other massive applications opened while I did it then he should have enough ram. I have an external hard drive, I can move pictures to to free up space, but if this should not be a problem for camera raw then I don't know what else to do.
  
  The only other thing I can think who might have caused it, that's the last time I opened photoshop a few days ago, I received this warning message
  
  I just clicked 'OK' and after that the raw camera seemed to work perfectly fine. It worked as he normally does, so I assumed nothing was wrong and that the acceleration of the GPU or anything that was is no longer disabled. Now, I can't even open dialogue Camera Raw Preferences.

  I looked in the application of plug-ins, I'm not sure what is supposed to be there but Camera Raw is certainly not. The generator folder is empty - is this a problem?
  

  I tried looking through the other threads on this kind of problem with camera raw, but I have seen one for 2015 of CC, and still less one where he was working very well and now is not, or that the operating system has not been updated recently. I prefer not to update the operating system of my computer, it would be the first thing you suggest. I don't see how it could be the fault of the operating system - it worked fine until today. He managed the CC perfectly well up-to-date.

  It is vital that Camera Raw is operational, I need it for my college photography class work and assignments. It would be pretty boring and very embarrassing if the only way I could get my work would be to travel to use the computers on campus, especially since I'm paying $28 (NZ) a month for this software (which is more than the city $14,99 per month for students of secondary and tertiary).

  Help would be very appreciated!

  Kind regards

  Ellie Crowe

  The ACR 7.4 700 d or newer of the 70 d (if there was typo) requires and ACR, 8.2 or newer.

  PS CC 2015 as the title says needs OS X 10.9 or newer so PS CC 2014 is the most recent CC PS, you can run on your 10.8.

  11 elements of Photoshop that supports RTAs 7.1 also supports ACR 7.4, so you should be able to update your PSE11 to 7.4 of the cab and open the 700 d raw files.

  --

  It is unclear why your PS CC 2014 cannot be updated at least 8.2 RTAs that must run on your old operating system.

  I would be completely uninstall the PS CC 2014, reboot, then reinstall and use the help / updates to see if you can get a new Camera Raw plugin that works.

• I need to combine several PDF files into a single attachment on my iPhone. I subscribe to the $ 9 per month package, but I can't seem to find an option to combine the files of one attachment. Can you please help?

  I need to combine PDF files in a magnetic. I subscribe to the $ 9 per month package. Is this possible?

  Hello

  With Adobe Acrobat iOS app, we can only create PDF of it. To combine the documents, go to https://cloud.acrobat.com/combinepdf on your device browser.

  Thank you

  Abhishek

• I just bought the new Canon 50 mega pixel EOS 5DSR and Lightroom 5 isn't recoginizing than RAW files please help

  5 Lightroom is not recognizing that the RAW files from the Canon EOS 5DSR news can we some please help with this.  The files are good as they open in Adobe Bridge.  Thank you

  This camera was introduced after Lr 5 are obsolete.

  Camera Raw plugin | Supported devices

  You need Lr 6, or convert your CR2s in DNG with the DNG Coinverter program, which Lr 5 can read.

• file please help

  Hi, I have photoshop cs5 for a few days was an error that my processor is not active... This made me to support on the web in adobe after that I went to my suggestions and I sow the scratch setting and also went to support Learn more
  I have 2 hard drives, divided into four partitions windows is C and did not then have 6 GB on it so I need more space...
  I have the scratch of H and G, but desselected the C program... I closed photosop then reopened, but then I got this error message:
  «Cannot open file because the file is locked or you have not the access necessary privileges.use the comand of properties in windows Explorer to open the file «»

  I have no idea how do and now I can open photoshop at all
  PLEASE help me if you ca
  Thank you
  Windows 7

  1. you must have full control permissions in the root folder of any disks you select to scratch them off.  Make sure that your specific user account has this level of access.

  2. you can get a prompt to allow you to change the disks scratch when Photoshop starts if you hold Ctrl-Alt immediately after starting Photoshop since its entry in the menu or shortcut.  You must be very quick and it may take several tries, but if you press the buttons in time you will get a pop-up dialog box that looks like this.  You can use it to change your selections.

  

  -Christmas

• CS5 - cannot print single pages in tiled file - please help?

  When I go to print a document I have more to choose a range of pages to print in my files in mosaic.  "All" is selected and the "range" opion will not select.  I don't do anything different from what I did with the CS3 version.  Using Creative Suite with window 7.

  Help, please!

  Thank you

  Sometimes looks like they did it very hard when they actually made it easier for you.

  It's right in front of you, but because you don't expect it to be there you see.

  Screen Tile > tile range so simple!

  

  It numbers your tiles for you well and does not give you weird shape tiles. What do you think of this new feature?

  

• ActionScript does not not on the HTML of the file Please HELP

  Hello

  I made a Web site in flash, you can download everything here, because I need this problem fixed by Monday http://www.mediafire.com/?sharekey=e5d0b30598ff413aa0f2f20c509059d9e04e75f6e8ebb871

  The problem is, when I publish the file and run the file html, actionscript code does not work. When I run the project in flash, it works perfectly. I don't think that it is the player or anything of that kind that will not, even if I can't be sure. I tried this like 10 different computers, and neither was able to load the actionscript code. Does anyone know why the actionscript code would not work when I run the HTML of the site?

  Please help, thanks.

  you have a coding error: you cannot assign full-screen without user interaction (such as clicking on a button).

• None of my work.imtrying of tools windows vista to restore my comp.to than its original state, but I can't find to open all the tools like system restore, disk cleanup, difragment, etc...

  When I turn my comp.on it gives me all sorts of messages cannot find shortcut to file.it is unable to deal with a problem.

  When I turn my comp.on it gives me all sorts of messages cannot find shortcut to file.it is unable to deal with a problem.

  Hé el24

  you do not etc system restore disk cleanup to put your computer to the standards of the factory how you bought it if that's what you hear

  Contact your computer manufacturer and ask them to send you a set of vista recovery discs and also ask them if you have a vista recovery partition on your hard drive to reinstall vista back to factory standards

  you will normally need to press F10 or F11 at startup to start the recovery process vista back to factory standards

  Ask them the sequence of keys to use to start the process from the recovery partition

  If in your question that you mean how do you do maintenance work on your existing operating system, please let us know

  Walter, the time zone traveller